Commit cb1a5bae authored by Benjamin Beichler's avatar Benjamin Beichler Committed by Johannes Berg

mac80211_hwsim: add permanent mac address option for new radios

If simulation needs predictable permanent mac addresses of hwsim wireless
phy, this patch add the ability to create a new radio with a user defined
permanent mac address. Allowed mac addresses needs to be locally
administrated mac addresses (as also the former fixed 42:* and 02:* were).

To do not break the operation with legacy software using hwsim, the new
address is set twice. The problem here is, the netlink call backs use
wiphy->addresses[1] as identification of a radio and not the proposed
permanent address (wiphy->addresses[0]). This design decision is not
documented in the kernel repo, therefore this patch simply reproduces this,
but with the same address.
Signed-off-by: default avatarBenjamin Beichler <benjamin.beichler@uni-rostock.de>
[make pointer const]
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
parent 91e6dd82
......@@ -637,6 +637,7 @@ static const struct nla_policy hwsim_genl_policy[HWSIM_ATTR_MAX + 1] = {
[HWSIM_ATTR_RADIO_NAME] = { .type = NLA_STRING },
[HWSIM_ATTR_NO_VIF] = { .type = NLA_FLAG },
[HWSIM_ATTR_FREQ] = { .type = NLA_U32 },
[HWSIM_ATTR_PERM_ADDR] = { .type = NLA_UNSPEC, .len = ETH_ALEN },
};
static void mac80211_hwsim_tx_frame(struct ieee80211_hw *hw,
......@@ -2408,6 +2409,7 @@ struct hwsim_new_radio_params {
bool destroy_on_close;
const char *hwname;
bool no_vif;
const u8 *perm_addr;
};
static void hwsim_mcast_config_msg(struct sk_buff *mcast_skb,
......@@ -2572,15 +2574,25 @@ static int mac80211_hwsim_new_radio(struct genl_info *info,
skb_queue_head_init(&data->pending);
SET_IEEE80211_DEV(hw, data->dev);
eth_zero_addr(addr);
addr[0] = 0x02;
addr[3] = idx >> 8;
addr[4] = idx;
memcpy(data->addresses[0].addr, addr, ETH_ALEN);
memcpy(data->addresses[1].addr, addr, ETH_ALEN);
data->addresses[1].addr[0] |= 0x40;
hw->wiphy->n_addresses = 2;
hw->wiphy->addresses = data->addresses;
if (!param->perm_addr) {
eth_zero_addr(addr);
addr[0] = 0x02;
addr[3] = idx >> 8;
addr[4] = idx;
memcpy(data->addresses[0].addr, addr, ETH_ALEN);
/* Why need here second address ? */
data->addresses[1].addr[0] |= 0x40;
memcpy(data->addresses[1].addr, addr, ETH_ALEN);
hw->wiphy->n_addresses = 2;
hw->wiphy->addresses = data->addresses;
/* possible address clash is checked at hash table insertion */
} else {
memcpy(data->addresses[0].addr, param->perm_addr, ETH_ALEN);
/* compatibility with automatically generated mac addr */
memcpy(data->addresses[1].addr, param->perm_addr, ETH_ALEN);
hw->wiphy->n_addresses = 2;
hw->wiphy->addresses = data->addresses;
}
data->channels = param->channels;
data->use_chanctx = param->use_chanctx;
......@@ -3210,6 +3222,19 @@ static int hwsim_new_radio_nl(struct sk_buff *msg, struct genl_info *info)
param.regd = hwsim_world_regdom_custom[idx];
}
if (info->attrs[HWSIM_ATTR_PERM_ADDR]) {
if (!is_valid_ether_addr(
nla_data(info->attrs[HWSIM_ATTR_PERM_ADDR]))) {
GENL_SET_ERR_MSG(info,"MAC is no valid source addr");
NL_SET_BAD_ATTR(info->extack,
info->attrs[HWSIM_ATTR_PERM_ADDR]);
return -EINVAL;
}
param.perm_addr = nla_data(info->attrs[HWSIM_ATTR_PERM_ADDR]);
}
ret = mac80211_hwsim_new_radio(info, &param);
kfree(hwname);
return ret;
......
......@@ -68,7 +68,12 @@ enum hwsim_tx_control_flags {
* %HWSIM_ATTR_SIGNAL, %HWSIM_ATTR_COOKIE
* @HWSIM_CMD_NEW_RADIO: create a new radio with the given parameters,
* returns the radio ID (>= 0) or negative on errors, if successful
* then multicast the result
* then multicast the result, uses optional parameter:
* %HWSIM_ATTR_REG_STRICT_REG, %HWSIM_ATTR_SUPPORT_P2P_DEVICE,
* %HWSIM_ATTR_DESTROY_RADIO_ON_CLOSE, %HWSIM_ATTR_CHANNELS,
* %HWSIM_ATTR_NO_VIF, %HWSIM_ATTR_RADIO_NAME, %HWSIM_ATTR_USE_CHANCTX,
* %HWSIM_ATTR_REG_HINT_ALPHA2, %HWSIM_ATTR_REG_CUSTOM_REG,
* %HWSIM_ATTR_PERM_ADDR
* @HWSIM_CMD_DEL_RADIO: destroy a radio, reply is multicasted
* @HWSIM_CMD_GET_RADIO: fetch information about existing radios, uses:
* %HWSIM_ATTR_RADIO_ID
......@@ -126,6 +131,7 @@ enum {
* @HWSIM_ATTR_FREQ: Frequency at which packet is transmitted or received.
* @HWSIM_ATTR_TX_INFO_FLAGS: additional flags for corresponding
* rates of %HWSIM_ATTR_TX_INFO
* @HWSIM_ATTR_PERM_ADDR: permanent mac address of new radio
* @__HWSIM_ATTR_MAX: enum limit
*/
......@@ -153,6 +159,7 @@ enum {
HWSIM_ATTR_FREQ,
HWSIM_ATTR_PAD,
HWSIM_ATTR_TX_INFO_FLAGS,
HWSIM_ATTR_PERM_ADDR,
__HWSIM_ATTR_MAX,
};
#define HWSIM_ATTR_MAX (__HWSIM_ATTR_MAX - 1)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment