Staging: wlan-ng: Switch from wext to cfg80211

Switch driver over from wext to cfg80211 interface.

Some Notes:

- This patch moves the driver wholesale from wext to cfg80211. Wext
support is still provided through the cfg80211 provided wext
compatability layer.

- Currently only infrastructure mode is implemented. Ad hoc mode is not
yet implemented, but can be added.

- It does not support connecting to a specified bssid, instead roaming
is handled by the card itself. This matches the behaviour of the
existing driver.

- It has been tested using NetworkManager (via wpa_supplicant)
configured to use the wext compatability layer, and then again with the
native nl80211 layer.
Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/wlan-ng/Makefile

@@ -4,5 +4,4 @@ prism2_usb-objs := prism2usb.o \
 		p80211conv.o \
 		p80211req.o \
 		p80211wep.o \
-		p80211wext.o \
 		p80211netdev.o

drivers/staging/wlan-ng/hfa384x.h

@@ -1284,6 +1284,8 @@ typedef struct hfa384x {
 	u16 link_status_new;
 	struct sk_buff_head authq;
 
+	u32 txrate;
+
 	/* And here we have stuff that used to be in priv */
 
 	/* State variables */

drivers/staging/wlan-ng/p80211metastruct.h

@@ -113,6 +113,7 @@ typedef struct p80211msg_dot11req_scan_results {
 	p80211item_uint32_t cfpollable;
 	p80211item_uint32_t cfpollreq;
 	p80211item_uint32_t privacy;
+	p80211item_uint32_t capinfo;
 	p80211item_uint32_t basicrate1;
 	p80211item_uint32_t basicrate2;
 	p80211item_uint32_t basicrate3;
@@ -209,6 +210,7 @@ typedef struct p80211msg_lnxreq_commsquality {
 	p80211item_uint32_t link;
 	p80211item_uint32_t level;
 	p80211item_uint32_t noise;
+	p80211item_uint32_t txrate;
 } __attribute__ ((packed)) p80211msg_lnxreq_commsquality_t;
 
 typedef struct p80211msg_lnxreq_autojoin {

drivers/staging/wlan-ng/p80211netdev.c

@@ -75,6 +75,7 @@
 
 #include <net/iw_handler.h>
 #include <net/net_namespace.h>
+#include <net/cfg80211.h>
 
 #include "p80211types.h"
 #include "p80211hdr.h"
@@ -87,6 +88,8 @@
 #include "p80211metastruct.h"
 #include "p80211metadef.h"
 
+#include "cfg80211.c"
+
 /* Support functions */
 static void p80211netdev_rx_bh(unsigned long arg);
 
@@ -732,6 +735,7 @@ static const struct net_device_ops p80211_netdev_ops = {
 * Arguments:
 *	wlandev		ptr to the wlandev structure for the
 *			interface.
+*	physdev		ptr to usb device
 * Returns:
 *	zero on success, non-zero otherwise.
 * Call Context:
@@ -740,10 +744,12 @@ static const struct net_device_ops p80211_netdev_ops = {
 *	compiled drivers, this function will be called in the
 *	context of the kernel startup code.
 ----------------------------------------------------------------*/
-int wlan_setup(wlandevice_t *wlandev)
+int wlan_setup(wlandevice_t *wlandev, struct device *physdev)
 {
 	int result = 0;
-	netdevice_t *dev;
+	netdevice_t *netdev;
+	struct wiphy *wiphy;
+	struct wireless_dev *wdev;
 
 	/* Set up the wlandev */
 	wlandev->state = WLAN_DEVICE_CLOSED;
@@ -755,20 +761,30 @@ int wlan_setup(wlandevice_t *wlandev)
 	tasklet_init(&wlandev->rx_bh,
 		     p80211netdev_rx_bh, (unsigned long)wlandev);
 
+	/* Allocate and initialize the wiphy struct */
+	wiphy = wlan_create_wiphy(physdev, wlandev);
+	if (wiphy == NULL) {
+		printk(KERN_ERR "Failed to alloc wiphy.\n");
+		return 1;
+	}
+
 	/* Allocate and initialize the struct device */
-	dev = alloc_netdev(0, "wlan%d", ether_setup);
-	if (dev == NULL) {
+	netdev = alloc_netdev(sizeof(struct wireless_dev), "wlan%d", ether_setup);
+	if (netdev == NULL) {
 		printk(KERN_ERR "Failed to alloc netdev.\n");
+		wlan_free_wiphy(wiphy);
 		result = 1;
 	} else {
-		wlandev->netdev = dev;
-		dev->ml_priv = wlandev;
-		dev->netdev_ops = &p80211_netdev_ops;
-
-		dev->wireless_handlers = &p80211wext_handler_def;
-
-		netif_stop_queue(dev);
-		netif_carrier_off(dev);
+		wlandev->netdev = netdev;
+		netdev->ml_priv = wlandev;
+		netdev->netdev_ops = &p80211_netdev_ops;
+		wdev = netdev_priv(netdev);
+		wdev->wiphy = wiphy;
+		wdev->iftype = NL80211_IFTYPE_STATION;
+		netdev->ieee80211_ptr = wdev;
+
+		netif_stop_queue(netdev);
+		netif_carrier_off(netdev);
 	}
 
 	return result;
@@ -797,14 +813,13 @@ int wlan_setup(wlandevice_t *wlandev)
 ----------------------------------------------------------------*/
 int wlan_unsetup(wlandevice_t *wlandev)
 {
-	int result = 0;
+	struct wireless_dev *wdev;
 
 	tasklet_kill(&wlandev->rx_bh);
 
-	if (wlandev->netdev == NULL) {
-		printk(KERN_ERR "called without wlandev->netdev set.\n");
-		result = 1;
-	} else {
+	if (wlandev->netdev) {
+		wdev = netdev_priv(wlandev->netdev);
+		if(wdev->wiphy) wlan_free_wiphy(wdev->wiphy);
 		free_netdev(wlandev->netdev);
 		wlandev->netdev = NULL;
 	}

drivers/staging/wlan-ng/p80211netdev.h

@@ -148,6 +148,7 @@ int p80211wext_event_associated(struct wlandevice *wlandev, int assoc);
 #define MAX_KEYLEN 32
 
 #define HOSTWEP_DEFAULTKEY_MASK (BIT(1)|BIT(0))
+#define HOSTWEP_SHAREDKEY BIT(3)
 #define HOSTWEP_DECRYPT  BIT(4)
 #define HOSTWEP_ENCRYPT  BIT(5)
 #define HOSTWEP_PRIVACYINVOKED BIT(6)
@@ -233,7 +234,7 @@ int wep_decrypt(wlandevice_t *wlandev, u8 *buf, u32 len, int key_override,
 int wep_encrypt(wlandevice_t *wlandev, u8 *buf, u8 *dst, u32 len, int keynum,
 		u8 *iv, u8 *icv);
 
-int wlan_setup(wlandevice_t *wlandev);
+int wlan_setup(wlandevice_t *wlandev, struct device *physdev);
 int wlan_unsetup(wlandevice_t *wlandev);
 int register_wlandev(wlandevice_t *wlandev);
 int unregister_wlandev(wlandevice_t *wlandev);

drivers/staging/wlan-ng/prism2mgmt.c

@@ -463,6 +463,8 @@ int prism2mgmt_scan_results(wlandevice_t *wlandev, void *msgp)
 
 	/* capinfo bits */
 	count = le16_to_cpu(item->capinfo);
+	req->capinfo.status = P80211ENUM_msgitem_status_data_ok;
+	req->capinfo.data = count;
 
 	/* privacy flag */
 	req->privacy.status = P80211ENUM_msgitem_status_data_ok;

drivers/staging/wlan-ng/prism2sta.c

@@ -124,6 +124,10 @@ MODULE_PARM_DESC(prism2_reset_settletime, "reset settle time in ms");
 
 MODULE_LICENSE("Dual MPL/GPL");
 
+void prism2_connect_result(wlandevice_t *wlandev, u8 failed);
+void prism2_disconnected(wlandevice_t *wlandev);
+void prism2_roamed(wlandevice_t *wlandev);
+
 static int prism2sta_open(wlandevice_t *wlandev);
 static int prism2sta_close(wlandevice_t *wlandev);
 static void prism2sta_reset(wlandevice_t *wlandev);
@@ -401,6 +405,7 @@ static int prism2sta_mlmerequest(wlandevice_t *wlandev, p80211msg_t *msg)
 			qualmsg->link.data = le16_to_cpu(hw->qual.CQ_currBSS);
 			qualmsg->level.data = le16_to_cpu(hw->qual.ASL_currBSS);
 			qualmsg->noise.data = le16_to_cpu(hw->qual.ANL_currFC);
+			qualmsg->txrate.data = hw->txrate;
 
 			break;
 		}
@@ -1300,6 +1305,9 @@ void prism2sta_processing_defer(struct work_struct *data)
 			    (portstatus == HFA384x_PSTATUS_CONN_IBSS) ?
 			    WLAN_MACMODE_IBSS_STA : WLAN_MACMODE_ESS_STA;
 
+			/* signal back up to cfg80211 layer */
+			prism2_connect_result(wlandev, P80211ENUM_truth_false);
+
 			/* Get the ball rolling on the comms quality stuff */
 			prism2sta_commsqual_defer(&hw->commsqual_bh);
 		}
@@ -1315,25 +1323,16 @@ void prism2sta_processing_defer(struct work_struct *data)
 		 * Indicate Deauthentication
 		 * Block Transmits, Ignore receives of data frames
 		 */
-		if (hw->join_ap == 2) {
-			hfa384x_JoinRequest_data_t joinreq;
-			joinreq = hw->joinreq;
-			/* Send the join request */
-			hfa384x_drvr_setconfig(hw,
-					       HFA384x_RID_JOINREQUEST,
-					       &joinreq,
-					       HFA384x_RID_JOINREQUEST_LEN);
+		if (wlandev->netdev->type == ARPHRD_ETHER)
 			printk(KERN_INFO
-			    "linkstatus=DISCONNECTED (re-submitting join)\n");
-		} else {
-			if (wlandev->netdev->type == ARPHRD_ETHER)
-				printk(KERN_INFO
-				       "linkstatus=DISCONNECTED (unhandled)\n");
-		}
+			       "linkstatus=DISCONNECTED (unhandled)\n");
 		wlandev->macmode = WLAN_MACMODE_NONE;
 
 		netif_carrier_off(wlandev->netdev);
 
+		/* signal back up to cfg80211 layer */
+		prism2_disconnected(wlandev);
+
 		break;
 
 	case HFA384x_LINK_AP_CHANGE:
@@ -1376,6 +1375,9 @@ void prism2sta_processing_defer(struct work_struct *data)
 		hw->link_status = HFA384x_LINK_CONNECTED;
 		netif_carrier_on(wlandev->netdev);
 
+		/* signal back up to cfg80211 layer */
+		prism2_roamed(wlandev);
+
 		break;
 
 	case HFA384x_LINK_AP_OUTOFRANGE:
@@ -1435,6 +1437,9 @@ void prism2sta_processing_defer(struct work_struct *data)
 
 		netif_carrier_off(wlandev->netdev);
 
+		/* signal back up to cfg80211 layer */
+		prism2_connect_result(wlandev, P80211ENUM_truth_true);
+
 		break;
 
 	default:
@@ -1446,7 +1451,6 @@ void prism2sta_processing_defer(struct work_struct *data)
 	}
 
 	wlandev->linkstatus = (hw->link_status == HFA384x_LINK_CONNECTED);
-	p80211wext_event_associated(wlandev, wlandev->linkstatus);
 
 failed:
 	return;
@@ -1985,6 +1989,8 @@ void prism2sta_commsqual_defer(struct work_struct *data)
 	hfa384x_t *hw = container_of(data, struct hfa384x, commsqual_bh);
 	wlandevice_t *wlandev = hw->wlandev;
 	hfa384x_bytestr32_t ssid;
+	p80211msg_dot11req_mibget_t msg;
+	p80211item_uint32_t *mibitem = (p80211item_uint32_t *) &msg.mibattribute.data;
 	int result = 0;
 
 	if (hw->wlandev->hwremoved)
@@ -2013,6 +2019,34 @@ void prism2sta_commsqual_defer(struct work_struct *data)
 			 le16_to_cpu(hw->qual.ANL_currFC));
 	}
 
+	/* Get the signal rate */
+	msg.msgcode = DIDmsg_dot11req_mibget;
+	mibitem->did = DIDmib_p2_p2MAC_p2CurrentTxRate;
+	result = p80211req_dorequest(wlandev, (u8 *) & msg);
+
+	if (result) {
+		pr_debug("get signal rate failed, result = %d\n",
+			 result);
+		goto done;
+	}
+
+	switch (mibitem->data) {
+	case HFA384x_RATEBIT_1:
+		hw->txrate = 10;
+		break;
+	case HFA384x_RATEBIT_2:
+		hw->txrate = 20;
+		break;
+	case HFA384x_RATEBIT_5dot5:
+		hw->txrate = 55;
+		break;
+	case HFA384x_RATEBIT_11:
+		hw->txrate = 110;
+		break;
+	default:
+		pr_debug("Bad ratebit (%d)\n", mibitem->data);
+	}
+
 	/* Lastly, we need to make sure the BSSID didn't change on us */
 	result = hfa384x_drvr_getconfig(hw,
 					HFA384x_RID_CURRENTBSSID,

drivers/staging/wlan-ng/prism2usb.c

@@ -119,7 +119,7 @@ static int prism2sta_probe_usb(struct usb_interface *interface,
 	}
 	hw = wlandev->priv;
 
-	if (wlan_setup(wlandev) != 0) {
+	if (wlan_setup(wlandev, &(interface->dev)) != 0) {
 		printk(KERN_ERR "%s: wlan_setup() failed.\n", dev_info);
 		result = -EIO;
 		goto failed;