Commit cb479129 authored by Mike Turquette's avatar Mike Turquette

Merge branch 'clk/mxs-for-3.6' of git://git.linaro.org/people/shawnguo/linux-2.6 into clk-3.6

parents 50667d63 64e2bc41
......@@ -106,7 +106,7 @@ static struct clk_lookup lcdif_lookups[] = {
static struct clk_lookup gpmi_lookups[] = {
{ .dev_id = "imx23-gpmi-nand", },
{ .dev_id = "8000c000.gpmi", },
{ .dev_id = "8000c000.gpmi-nand", },
};
static const char *sel_pll[] __initconst = { "pll", "ref_xtal", };
......@@ -189,6 +189,7 @@ int __init mx23_clocks_init(void)
}
clk_register_clkdev(clks[clk32k], NULL, "timrot");
clk_register_clkdev(clks[pwm], NULL, "80064000.pwm");
clk_register_clkdevs(clks[hbus], hbus_lookups, ARRAY_SIZE(hbus_lookups));
clk_register_clkdevs(clks[xbus], xbus_lookups, ARRAY_SIZE(xbus_lookups));
clk_register_clkdevs(clks[uart], uart_lookups, ARRAY_SIZE(uart_lookups));
......
......@@ -112,11 +112,11 @@ static void __init clk_misc_init(void)
/*
* 480 MHz seems too high to be ssp clock source directly,
* so set frac0 to get a 288 MHz ref_io0.
* so set frac0 to get a 288 MHz ref_io0 and ref_io1.
*/
val = readl_relaxed(FRAC0);
val &= ~(0x3f << BP_FRAC0_IO0FRAC);
val |= 30 << BP_FRAC0_IO0FRAC;
val &= ~((0x3f << BP_FRAC0_IO0FRAC) | (0x3f << BP_FRAC0_IO1FRAC));
val |= (30 << BP_FRAC0_IO0FRAC) | (30 << BP_FRAC0_IO1FRAC);
writel_relaxed(val, FRAC0);
}
......@@ -174,7 +174,7 @@ static struct clk_lookup lcdif_lookups[] = {
static struct clk_lookup gpmi_lookups[] = {
{ .dev_id = "imx28-gpmi-nand", },
{ .dev_id = "8000c000.gpmi", },
{ .dev_id = "8000c000.gpmi-nand", },
};
static struct clk_lookup fec_lookups[] = {
......@@ -314,6 +314,7 @@ int __init mx28_clocks_init(void)
clk_register_clkdev(clks[clk32k], NULL, "timrot");
clk_register_clkdev(clks[enet_out], NULL, "enet_out");
clk_register_clkdev(clks[pwm], NULL, "80064000.pwm");
clk_register_clkdevs(clks[hbus], hbus_lookups, ARRAY_SIZE(hbus_lookups));
clk_register_clkdevs(clks[xbus], xbus_lookups, ARRAY_SIZE(xbus_lookups));
clk_register_clkdevs(clks[uart], uart_lookups, ARRAY_SIZE(uart_lookups));
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment