ixgbe: add 1g PHY support for 82599

Add support for 1G SFP+ PHY's to 82599.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ixgbe/ixgbe_82599.c

@@ -206,6 +206,14 @@ static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
 	s32 status = 0;
 	u32 autoc = 0;
 
+	/* Determine 1G link capabilities off of SFP+ type */
+	if (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
+	    hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1) {
+		*speed = IXGBE_LINK_SPEED_1GB_FULL;
+		*negotiation = true;
+		goto out;
+	}
+
 	/*
 	 * Determine link capabilities based on the stored value of AUTOC,
 	 * which represents EEPROM defaults.  If AUTOC value has not been
@@ -2087,6 +2095,7 @@ static u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw)
 	u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
 	u16 ext_ability = 0;
 	u8 comp_codes_10g = 0;
+	u8 comp_codes_1g = 0;
 
 	hw->phy.ops.identify(hw);
 
@@ -2166,12 +2175,16 @@ static u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw)
 	case ixgbe_phy_sfp_ftl:
 	case ixgbe_phy_sfp_intel:
 	case ixgbe_phy_sfp_unknown:
+		hw->phy.ops.read_i2c_eeprom(hw,
+		      IXGBE_SFF_1GBE_COMP_CODES, &comp_codes_1g);
 		hw->phy.ops.read_i2c_eeprom(hw,
 		      IXGBE_SFF_10GBE_COMP_CODES, &comp_codes_10g);
 		if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
 			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
 		else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
 			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
+		else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE)
+			physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_T;
 		break;
 	default:
 		break;

drivers/net/ixgbe/ixgbe_ethtool.c

@@ -234,6 +234,13 @@ static int ixgbe_get_settings(struct net_device *netdev,
 		case ixgbe_sfp_type_not_present:
 			ecmd->port = PORT_NONE;
 			break;
+		case ixgbe_sfp_type_1g_cu_core0:
+		case ixgbe_sfp_type_1g_cu_core1:
+			ecmd->port = PORT_TP;
+			ecmd->supported = SUPPORTED_TP;
+			ecmd->advertising = (ADVERTISED_1000baseT_Full |
+			                     ADVERTISED_TP);
+			break;
 		case ixgbe_sfp_type_unknown:
 		default:
 			ecmd->port = PORT_OTHER;

drivers/net/ixgbe/ixgbe_phy.c

@@ -577,6 +577,8 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 		 * 6    SFP_SR/LR_CORE1 - 82599-specific
 		 * 7    SFP_act_lmt_DA_CORE0 - 82599-specific
 		 * 8    SFP_act_lmt_DA_CORE1 - 82599-specific
+		 * 9    SFP_1g_cu_CORE0 - 82599-specific
+		 * 10   SFP_1g_cu_CORE1 - 82599-specific
 		 */
 		if (hw->mac.type == ixgbe_mac_82598EB) {
 			if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
@@ -625,6 +627,13 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 				else
 					hw->phy.sfp_type =
 					              ixgbe_sfp_type_srlr_core1;
+			else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE)
+				if (hw->bus.lan_id == 0)
+					hw->phy.sfp_type =
+						ixgbe_sfp_type_1g_cu_core0;
+				else
+					hw->phy.sfp_type =
+						ixgbe_sfp_type_1g_cu_core1;
 			else
 				hw->phy.sfp_type = ixgbe_sfp_type_unknown;
 		}
@@ -696,8 +705,10 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 			goto out;
 		}
 
-		/* 1G SFP modules are not supported */
-		if (comp_codes_10g == 0) {
+		/* Verify supported 1G SFP modules */
+		if (comp_codes_10g == 0 &&
+		    !(hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
+		      hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0)) {
 			hw->phy.type = ixgbe_phy_sfp_unsupported;
 			status = IXGBE_ERR_SFP_NOT_SUPPORTED;
 			goto out;
@@ -711,7 +722,9 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 
 		/* This is guaranteed to be 82599, no need to check for NULL */
 		hw->mac.ops.get_device_caps(hw, &enforce_sfp);
-		if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP)) {
+		if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP) &&
+		    !((hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0) ||
+		      (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1))) {
 			/* Make sure we're a supported PHY type */
 			if (hw->phy.type == ixgbe_phy_sfp_intel) {
 				status = 0;
@@ -742,6 +755,7 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
                                         u16 *data_offset)
 {
 	u16 sfp_id;
+	u16 sfp_type = hw->phy.sfp_type;
 
 	if (hw->phy.sfp_type == ixgbe_sfp_type_unknown)
 		return IXGBE_ERR_SFP_NOT_SUPPORTED;
@@ -753,6 +767,17 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
 	    (hw->phy.sfp_type == ixgbe_sfp_type_da_cu))
 		return IXGBE_ERR_SFP_NOT_SUPPORTED;
 
+	/*
+	 * Limiting active cables and 1G Phys must be initialized as
+	 * SR modules
+	 */
+	if (sfp_type == ixgbe_sfp_type_da_act_lmt_core0 ||
+	    sfp_type == ixgbe_sfp_type_1g_cu_core0)
+		sfp_type = ixgbe_sfp_type_srlr_core0;
+	else if (sfp_type == ixgbe_sfp_type_da_act_lmt_core1 ||
+	         sfp_type == ixgbe_sfp_type_1g_cu_core1)
+		sfp_type = ixgbe_sfp_type_srlr_core1;
+
 	/* Read offset to PHY init contents */
 	hw->eeprom.ops.read(hw, IXGBE_PHY_INIT_OFFSET_NL, list_offset);
 
@@ -769,7 +794,7 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
 	hw->eeprom.ops.read(hw, *list_offset, &sfp_id);
 
 	while (sfp_id != IXGBE_PHY_INIT_END_NL) {
-		if (sfp_id == hw->phy.sfp_type) {
+		if (sfp_id == sfp_type) {
 			(*list_offset)++;
 			hw->eeprom.ops.read(hw, *list_offset, data_offset);
 			if ((!*data_offset) || (*data_offset == 0xFFFF)) {

drivers/net/ixgbe/ixgbe_phy.h

@@ -48,6 +48,7 @@
 #define IXGBE_SFF_DA_SPEC_ACTIVE_LIMITING    0x4
 #define IXGBE_SFF_1GBASESX_CAPABLE           0x1
 #define IXGBE_SFF_1GBASELX_CAPABLE           0x2
+#define IXGBE_SFF_1GBASET_CAPABLE            0x8
 #define IXGBE_SFF_10GBASESR_CAPABLE          0x10
 #define IXGBE_SFF_10GBASELR_CAPABLE          0x20
 #define IXGBE_I2C_EEPROM_READ_MASK           0x100

drivers/net/ixgbe/ixgbe_type.h

@@ -2214,6 +2214,8 @@ enum ixgbe_sfp_type {
 	ixgbe_sfp_type_srlr_core1 = 6,
 	ixgbe_sfp_type_da_act_lmt_core0 = 7,
 	ixgbe_sfp_type_da_act_lmt_core1 = 8,
+	ixgbe_sfp_type_1g_cu_core0 = 9,
+	ixgbe_sfp_type_1g_cu_core1 = 10,
 	ixgbe_sfp_type_not_present = 0xFFFE,
 	ixgbe_sfp_type_unknown = 0xFFFF
 };