Commit cb949ce5 authored by Karol Wachowski's avatar Karol Wachowski Committed by Jacek Lawrynowicz

accel/ivpu: Remove D3hot delay for Meteorlake

VPU on MTL has hardware optimizations and does not require 10ms
D0 - D3hot transition delay imposed by PCI specification (PCIe
r6.0, sec 5.9.) .

The delay removal is traditionally done by adding PCI ID to
quirk_remove_d3hot_delay() in drivers/pci/quirks.c . But since
we do not need that optimization before driver probe and we
can better specify in the ivpu driver on what (future) hardware
use the optimization, we do not use quirk_remove_d3hot_delay()
for that.
Signed-off-by: default avatarKarol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: default avatarStanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: default avatarJeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: default avatarJacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230403121545.2995279-1-stanislaw.gruszka@linux.intel.com
parent 8678c8b3
......@@ -433,6 +433,10 @@ static int ivpu_pci_init(struct ivpu_device *vdev)
/* Clear any pending errors */
pcie_capability_clear_word(pdev, PCI_EXP_DEVSTA, 0x3f);
/* VPU MTL does not require PCI spec 10m D3hot delay */
if (ivpu_is_mtl(vdev))
pdev->d3hot_delay = 0;
ret = pcim_enable_device(pdev);
if (ret) {
ivpu_err(vdev, "Failed to enable PCI device: %d\n", ret);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment