dt-bindings: media: Add bindings for THine THP7312 ISP

The THP7312 is an external ISP from THine. Add DT bindings for it.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

Documentation/devicetree/bindings/media/i2c/thine,thp7312.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2023 Ideas on Board
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/thine,thp7312.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: THine THP7312
+
+maintainers:
+  - Paul Elder <paul.elder@@ideasonboard.com>
+
+description:
+  The THP7312 is a standalone ISP controlled over i2c, and is capable of
+  various image processing and correction functions, including 3A control. It
+  can be connected to CMOS image sensors from various vendors, supporting both
+  MIPI CSI-2 and parallel interfaces. It can also output on either MIPI CSI-2
+  or parallel. The hardware is capable of transmitting and receiving MIPI
+  interlaved data strams with data types or multiple virtual channel
+  identifiers.
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: thine,thp7312
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: CLKI clock input
+
+  thine,boot-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 1
+    default: 1
+    description:
+      Boot mode of the THP7312, reflecting the value of the BOOT[0] pin strap.
+      0 is for the SPI/2-wire slave boot, 1 is for the SPI master boot (from
+      external flash ROM).
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      Reference to the GPIO connected to the RESET_N pin, if any.
+      Must be released (set high) after all supplies are applied.
+
+  vddcore-supply:
+    description:
+      1.2V supply for core, PLL, MIPI rx and MIPI tx.
+
+  vhtermrx-supply:
+    description:
+      Supply for input (RX). 1.8V for MIPI, or 1.8/2.8/3.3V for parallel.
+
+  vddtx-supply:
+    description:
+      Supply for output (TX). 1.8V for MIPI, or 1.8/2.8/3.3V for parallel.
+
+  vddhost-supply:
+    description:
+      Supply for host interface. 1.8V, 2.8V, or 3.3V.
+
+  vddcmos-supply:
+    description:
+      Supply for sensor interface. 1.8V, 2.8V, or 3.3V.
+
+  vddgpio-0-supply:
+    description:
+      Supply for GPIO_0. 1.8V, 2.8V, or 3.3V.
+
+  vddgpio-1-supply:
+    description:
+      Supply for GPIO_1. 1.8V, 2.8V, or 3.3V.
+
+  orientation: true
+  rotation: true
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          bus-type:
+            const: 4 # CSI-2 D-PHY
+
+          data-lanes:
+            description:
+              This property is for lane reordering between the THP7312 and the
+              SoC. The sensor supports either two-lane, or four-lane operation.
+              If this property is omitted four-lane operation is assumed. For
+              two-lane operation the property must be set to <1 2>.
+            minItems: 2
+            maxItems: 4
+            items:
+              maximum: 4
+
+  sensors:
+    type: object
+    description: List of connected sensors
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^sensor@[01]$":
+        type: object
+        description:
+          Sensors connected to the first and second input, with one node per
+          sensor.
+
+        properties:
+          thine,model:
+            $ref: /schemas/types.yaml#/definitions/string
+            description:
+              Model of the connected sensors. Must be a valid compatible string.
+
+          reg:
+            description: THP7312 input port number
+            items:
+              - maximum: 1
+
+          data-lanes:
+            $ref: /schemas/media/video-interfaces.yaml#/properties/data-lanes
+            items:
+              maxItems: 4
+            description:
+              This property is for lane reordering between the THP7312 and the imaging
+              sensor that it is connected to.
+
+        required:
+          - reg
+          - data-lanes
+
+        additionalProperties: false
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - clocks
+  - vddcore-supply
+  - vhtermrx-supply
+  - vddtx-supply
+  - vddhost-supply
+  - vddcmos-supply
+  - vddgpio-0-supply
+  - vddgpio-1-supply
+  - sensors
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/media/video-interfaces.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera@61 {
+            compatible = "thine,thp7312";
+            reg = <0x61>;
+
+            pinctrl-names = "default";
+            pinctrl-0 = <&cam1_pins_default>;
+
+            reset-gpios = <&pio 119 GPIO_ACTIVE_LOW>;
+            clocks = <&camera61_clk>;
+
+            vddcore-supply = <&vsys_v4p2>;
+            vhtermrx-supply = <&vsys_v4p2>;
+            vddtx-supply = <&vsys_v4p2>;
+            vddhost-supply = <&vsys_v4p2>;
+            vddcmos-supply = <&vsys_v4p2>;
+            vddgpio-0-supply = <&vsys_v4p2>;
+            vddgpio-1-supply = <&vsys_v4p2>;
+
+            orientation = <0>;
+            rotation = <0>;
+
+            sensors {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                sensor@0 {
+                    thine,model = "sony,imx258";
+                    reg = <0>;
+
+                    data-lanes = <4 1 3 2>;
+                };
+            };
+
+            port {
+                thp7312_2_endpoint: endpoint {
+                    remote-endpoint = <&mipi_thp7312_2>;
+                    bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+                    data-lanes = <4 2 1 3>;
+                };
+            };
+        };
+    };
+...

MAINTAINERS

@@ -21663,6 +21663,14 @@ S:	Maintained
 F:	Documentation/ABI/testing/sysfs-class-firmware-attributes
 F:	drivers/platform/x86/think-lmi.?
 
+THP7312 ISP DRIVER
+M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+M:	Paul Elder <paul.elder@ideasonboard.com>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
+F:	Documentation/devicetree/bindings/media/i2c/thine,thp7312.yaml
+
 THUNDERBOLT DMA TRAFFIC TEST DRIVER
 M:	Isaac Hazan <isaac.hazan@intel.com>
 L:	linux-usb@vger.kernel.org