Commit cc1049cc authored by Marcin Wojtas's avatar Marcin Wojtas Committed by Jakub Kicinski

net: dsa: mv88e6xxx: fix speed setting for CPU/DSA ports

Commit 3c783b83 ("net: dsa: mv88e6xxx: get rid of SPEED_MAX setting")
stopped relying on SPEED_MAX constant and hardcoded speed settings
for the switch ports and rely on phylink configuration.

It turned out, however, that when the relevant code is called,
the mac_capabilites of CPU/DSA port remain unset.
mv88e6xxx_setup_port() is called via mv88e6xxx_setup() in
dsa_tree_setup_switches(), which precedes setting the caps in
phylink_get_caps down in the chain of dsa_tree_setup_ports().

As a result the mac_capabilites are 0 and the default speed for CPU/DSA
port is 10M at the start. To fix that, execute mv88e6xxx_get_caps()
and obtain the capabilities driectly.

Fixes: 3c783b83 ("net: dsa: mv88e6xxx: get rid of SPEED_MAX setting")
Signed-off-by: default avatarMarcin Wojtas <mw@semihalf.com>
Reviewed-by: default avatarVladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220726230918.2772378-1-mw@semihalf.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
parent 2bb88b2c
......@@ -3293,7 +3293,12 @@ static int mv88e6xxx_setup_port(struct mv88e6xxx_chip *chip, int port)
* port and all DSA ports to their maximum bandwidth and full duplex.
*/
if (dsa_is_cpu_port(ds, port) || dsa_is_dsa_port(ds, port)) {
unsigned long caps = dp->pl_config.mac_capabilities;
struct phylink_config pl_config = {};
unsigned long caps;
mv88e6xxx_get_caps(ds, port, &pl_config);
caps = pl_config.mac_capabilities;
if (chip->info->ops->port_max_speed_mode)
mode = chip->info->ops->port_max_speed_mode(port);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment