Commit cc2080b0 authored by Lv Zheng's avatar Lv Zheng Committed by Rafael J. Wysocki

ACPICA: Utilities: Cleanup to convert physical address printing formats.

ACPICA commit 7f06739db43a85083a70371c14141008f20b2198

For physical addresses, since the address may exceed 32-bit address range
after calculation, we should use %8.8X%8.8X (see ACPI_FORMAT_UINT64()) to
convert the %p formats.

This is a preparation to switch acpi_physical_address to 64-bit on 32-bit
kernel builds.

Link: https://github.com/acpica/acpica/commit/7f06739dSigned-off-by: default avatarLv Zheng <lv.zheng@intel.com>
Signed-off-by: default avatarBob Moore <robert.moore@intel.com>
Signed-off-by: default avatarRafael J. Wysocki <rafael.j.wysocki@intel.com>
parent 6d3fd3cc
......@@ -263,17 +263,15 @@ acpi_ex_access_region(union acpi_operand_object *obj_desc,
}
ACPI_DEBUG_PRINT_RAW((ACPI_DB_BFIELD,
" Region [%s:%X], Width %X, ByteBase %X, Offset %X at %p\n",
" Region [%s:%X], Width %X, ByteBase %X, Offset %X at %8.8X%8.8X\n",
acpi_ut_get_region_name(rgn_desc->region.
space_id),
rgn_desc->region.space_id,
obj_desc->common_field.access_byte_width,
obj_desc->common_field.base_byte_offset,
field_datum_byte_offset, ACPI_CAST_PTR(void,
(rgn_desc->
region.
address +
region_offset))));
field_datum_byte_offset,
ACPI_FORMAT_UINT64(rgn_desc->region.address +
region_offset)));
/* Invoke the appropriate address_space/op_region handler */
......
......@@ -142,17 +142,17 @@ acpi_hw_validate_io_request(acpi_io_address address, u32 bit_width)
byte_width = ACPI_DIV_8(bit_width);
last_address = address + byte_width - 1;
ACPI_DEBUG_PRINT((ACPI_DB_IO, "Address %p LastAddress %p Length %X",
ACPI_CAST_PTR(void, address), ACPI_CAST_PTR(void,
last_address),
byte_width));
ACPI_DEBUG_PRINT((ACPI_DB_IO,
"Address %8.8X%8.8X LastAddress %8.8X%8.8X Length %X",
ACPI_FORMAT_UINT64(address),
ACPI_FORMAT_UINT64(last_address), byte_width));
/* Maximum 16-bit address in I/O space */
if (last_address > ACPI_UINT16_MAX) {
ACPI_ERROR((AE_INFO,
"Illegal I/O port address/length above 64K: %p/0x%X",
ACPI_CAST_PTR(void, address), byte_width));
"Illegal I/O port address/length above 64K: %8.8X%8.8X/0x%X",
ACPI_FORMAT_UINT64(address), byte_width));
return_ACPI_STATUS(AE_LIMIT);
}
......@@ -181,8 +181,8 @@ acpi_hw_validate_io_request(acpi_io_address address, u32 bit_width)
if (acpi_gbl_osi_data >= port_info->osi_dependency) {
ACPI_DEBUG_PRINT((ACPI_DB_IO,
"Denied AML access to port 0x%p/%X (%s 0x%.4X-0x%.4X)",
ACPI_CAST_PTR(void, address),
"Denied AML access to port 0x%8.8X%8.8X/%X (%s 0x%.4X-0x%.4X)",
ACPI_FORMAT_UINT64(address),
byte_width, port_info->name,
port_info->start,
port_info->end));
......
......@@ -271,12 +271,11 @@ acpi_ns_dump_one_object(acpi_handle obj_handle,
switch (type) {
case ACPI_TYPE_PROCESSOR:
acpi_os_printf("ID %02X Len %02X Addr %p\n",
acpi_os_printf("ID %02X Len %02X Addr %8.8X%8.8X\n",
obj_desc->processor.proc_id,
obj_desc->processor.length,
ACPI_CAST_PTR(void,
obj_desc->processor.
address));
ACPI_FORMAT_UINT64(obj_desc->processor.
address));
break;
case ACPI_TYPE_DEVICE:
......
......@@ -187,8 +187,9 @@ acpi_tb_install_fixed_table(acpi_physical_address address,
status = acpi_tb_acquire_temp_table(&new_table_desc, address,
ACPI_TABLE_ORIGIN_INTERNAL_PHYSICAL);
if (ACPI_FAILURE(status)) {
ACPI_ERROR((AE_INFO, "Could not acquire table length at %p",
ACPI_PHYSADDR_TO_PTR(address)));
ACPI_ERROR((AE_INFO,
"Could not acquire table length at %8.8X%8.8X",
ACPI_FORMAT_UINT64(address)));
return_ACPI_STATUS(status);
}
......@@ -246,8 +247,9 @@ acpi_tb_install_standard_table(acpi_physical_address address,
status = acpi_tb_acquire_temp_table(&new_table_desc, address, flags);
if (ACPI_FAILURE(status)) {
ACPI_ERROR((AE_INFO, "Could not acquire table length at %p",
ACPI_PHYSADDR_TO_PTR(address)));
ACPI_ERROR((AE_INFO,
"Could not acquire table length at %8.8X%8.8X",
ACPI_FORMAT_UINT64(address)));
return_ACPI_STATUS(status);
}
......@@ -258,9 +260,10 @@ acpi_tb_install_standard_table(acpi_physical_address address,
if (!reload &&
acpi_gbl_disable_ssdt_table_install &&
ACPI_COMPARE_NAME(&new_table_desc.signature, ACPI_SIG_SSDT)) {
ACPI_INFO((AE_INFO, "Ignoring installation of %4.4s at %p",
ACPI_INFO((AE_INFO,
"Ignoring installation of %4.4s at %8.8X%8.8X",
new_table_desc.signature.ascii,
ACPI_PHYSADDR_TO_PTR(address)));
ACPI_FORMAT_UINT64(address)));
goto release_and_exit;
}
......
......@@ -107,10 +107,10 @@ acpi_ut_add_address_range(acpi_adr_space_type space_id,
acpi_gbl_address_range_list[space_id] = range_info;
ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
"\nAdded [%4.4s] address range: 0x%p-0x%p\n",
"\nAdded [%4.4s] address range: 0x%8.8X%8.8X-0x%8.8X%8.8X\n",
acpi_ut_get_node_name(range_info->region_node),
ACPI_CAST_PTR(void, address),
ACPI_CAST_PTR(void, range_info->end_address)));
ACPI_FORMAT_UINT64(address),
ACPI_FORMAT_UINT64(range_info->end_address)));
(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
return_ACPI_STATUS(AE_OK);
......@@ -160,15 +160,13 @@ acpi_ut_remove_address_range(acpi_adr_space_type space_id,
}
ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
"\nRemoved [%4.4s] address range: 0x%p-0x%p\n",
"\nRemoved [%4.4s] address range: 0x%8.8X%8.8X-0x%8.8X%8.8X\n",
acpi_ut_get_node_name(range_info->
region_node),
ACPI_CAST_PTR(void,
range_info->
start_address),
ACPI_CAST_PTR(void,
range_info->
end_address)));
ACPI_FORMAT_UINT64(range_info->
start_address),
ACPI_FORMAT_UINT64(range_info->
end_address)));
ACPI_FREE(range_info);
return_VOID;
......@@ -245,16 +243,14 @@ acpi_ut_check_address_range(acpi_adr_space_type space_id,
region_node);
ACPI_WARNING((AE_INFO,
"%s range 0x%p-0x%p conflicts with OpRegion 0x%p-0x%p (%s)",
"%s range 0x%8.8X%8.8X-0x%8.8X%8.8X conflicts with OpRegion 0x%8.8X%8.8X-0x%8.8X%8.8X (%s)",
acpi_ut_get_region_name(space_id),
ACPI_CAST_PTR(void, address),
ACPI_CAST_PTR(void, end_address),
ACPI_CAST_PTR(void,
range_info->
start_address),
ACPI_CAST_PTR(void,
range_info->
end_address),
ACPI_FORMAT_UINT64(address),
ACPI_FORMAT_UINT64(end_address),
ACPI_FORMAT_UINT64(range_info->
start_address),
ACPI_FORMAT_UINT64(range_info->
end_address),
pathname));
ACPI_FREE(pathname);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment