Commit cc392c58 authored by Ritesh Harjani's avatar Ritesh Harjani Committed by Ulf Hansson

mmc: sdhci-msm: Add calibration tuning for CDCLP533 circuit

In HS400 mode a new RCLK is introduced on the interface for read data
transfers. The eMMC5.0 device transmits the read data to the host with
respect to rising and falling edges of RCLK. In order to ensure correct
operation of read data transfers in HS400 mode, the incoming RX data
needs to be sampled by delayed version of RCLK.

The CDCLP533 delay circuit shifts the RCLK by T/4. It needs to be
initialized, configured and enabled once during HS400 mode switch and
when operational voltage/clock is changed.
Signed-off-by: default avatarVenkat Gopalakrishnan <venkatg@codeaurora.org>
Signed-off-by: default avatarRitesh Harjani <riteshh@codeaurora.org>
Acked-by: default avatarAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
parent abf270e5
...@@ -20,6 +20,7 @@ ...@@ -20,6 +20,7 @@
#include <linux/mmc/mmc.h> #include <linux/mmc/mmc.h>
#include <linux/pm_runtime.h> #include <linux/pm_runtime.h>
#include <linux/slab.h> #include <linux/slab.h>
#include <linux/iopoll.h>
#include "sdhci-pltfm.h" #include "sdhci-pltfm.h"
...@@ -58,6 +59,7 @@ ...@@ -58,6 +59,7 @@
#define CORE_DLL_PDN BIT(29) #define CORE_DLL_PDN BIT(29)
#define CORE_DLL_RST BIT(30) #define CORE_DLL_RST BIT(30)
#define CORE_DLL_CONFIG 0x100 #define CORE_DLL_CONFIG 0x100
#define CORE_CMD_DAT_TRACK_SEL BIT(0)
#define CORE_DLL_STATUS 0x108 #define CORE_DLL_STATUS 0x108
#define CORE_DLL_CONFIG_2 0x1b4 #define CORE_DLL_CONFIG_2 0x1b4
...@@ -73,6 +75,33 @@ ...@@ -73,6 +75,33 @@
#define CORE_HC_SELECT_IN_HS400 (6 << 19) #define CORE_HC_SELECT_IN_HS400 (6 << 19)
#define CORE_HC_SELECT_IN_MASK (7 << 19) #define CORE_HC_SELECT_IN_MASK (7 << 19)
#define CORE_CSR_CDC_CTLR_CFG0 0x130
#define CORE_SW_TRIG_FULL_CALIB BIT(16)
#define CORE_HW_AUTOCAL_ENA BIT(17)
#define CORE_CSR_CDC_CTLR_CFG1 0x134
#define CORE_CSR_CDC_CAL_TIMER_CFG0 0x138
#define CORE_TIMER_ENA BIT(16)
#define CORE_CSR_CDC_CAL_TIMER_CFG1 0x13C
#define CORE_CSR_CDC_REFCOUNT_CFG 0x140
#define CORE_CSR_CDC_COARSE_CAL_CFG 0x144
#define CORE_CDC_OFFSET_CFG 0x14C
#define CORE_CSR_CDC_DELAY_CFG 0x150
#define CORE_CDC_SLAVE_DDA_CFG 0x160
#define CORE_CSR_CDC_STATUS0 0x164
#define CORE_CALIBRATION_DONE BIT(0)
#define CORE_CDC_ERROR_CODE_MASK 0x7000000
#define CORE_CSR_CDC_GEN_CFG 0x178
#define CORE_CDC_SWITCH_BYPASS_OFF BIT(0)
#define CORE_CDC_SWITCH_RC_EN BIT(1)
#define CORE_DDR_200_CFG 0x184
#define CORE_CDC_T4_DLY_SEL BIT(0)
#define CORE_START_CDC_TRAFFIC BIT(6)
#define CORE_VENDOR_SPEC_CAPABILITIES0 0x11c #define CORE_VENDOR_SPEC_CAPABILITIES0 0x11c
#define INVALID_TUNING_PHASE -1 #define INVALID_TUNING_PHASE -1
...@@ -427,6 +456,119 @@ static int msm_init_cm_dll(struct sdhci_host *host) ...@@ -427,6 +456,119 @@ static int msm_init_cm_dll(struct sdhci_host *host)
return 0; return 0;
} }
static int sdhci_msm_cdclp533_calibration(struct sdhci_host *host)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
u32 config, calib_done;
int ret;
pr_debug("%s: %s: Enter\n", mmc_hostname(host->mmc), __func__);
/*
* Retuning in HS400 (DDR mode) will fail, just reset the
* tuning block and restore the saved tuning phase.
*/
ret = msm_init_cm_dll(host);
if (ret)
goto out;
/* Set the selected phase in delay line hw block */
ret = msm_config_cm_dll_phase(host, msm_host->saved_tuning_phase);
if (ret)
goto out;
config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
config |= CORE_CMD_DAT_TRACK_SEL;
writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
config = readl_relaxed(host->ioaddr + CORE_DDR_200_CFG);
config &= ~CORE_CDC_T4_DLY_SEL;
writel_relaxed(config, host->ioaddr + CORE_DDR_200_CFG);
config = readl_relaxed(host->ioaddr + CORE_CSR_CDC_GEN_CFG);
config &= ~CORE_CDC_SWITCH_BYPASS_OFF;
writel_relaxed(config, host->ioaddr + CORE_CSR_CDC_GEN_CFG);
config = readl_relaxed(host->ioaddr + CORE_CSR_CDC_GEN_CFG);
config |= CORE_CDC_SWITCH_RC_EN;
writel_relaxed(config, host->ioaddr + CORE_CSR_CDC_GEN_CFG);
config = readl_relaxed(host->ioaddr + CORE_DDR_200_CFG);
config &= ~CORE_START_CDC_TRAFFIC;
writel_relaxed(config, host->ioaddr + CORE_DDR_200_CFG);
/*
* Perform CDC Register Initialization Sequence
*
* CORE_CSR_CDC_CTLR_CFG0 0x11800EC
* CORE_CSR_CDC_CTLR_CFG1 0x3011111
* CORE_CSR_CDC_CAL_TIMER_CFG0 0x1201000
* CORE_CSR_CDC_CAL_TIMER_CFG1 0x4
* CORE_CSR_CDC_REFCOUNT_CFG 0xCB732020
* CORE_CSR_CDC_COARSE_CAL_CFG 0xB19
* CORE_CSR_CDC_DELAY_CFG 0x3AC
* CORE_CDC_OFFSET_CFG 0x0
* CORE_CDC_SLAVE_DDA_CFG 0x16334
*/
writel_relaxed(0x11800EC, host->ioaddr + CORE_CSR_CDC_CTLR_CFG0);
writel_relaxed(0x3011111, host->ioaddr + CORE_CSR_CDC_CTLR_CFG1);
writel_relaxed(0x1201000, host->ioaddr + CORE_CSR_CDC_CAL_TIMER_CFG0);
writel_relaxed(0x4, host->ioaddr + CORE_CSR_CDC_CAL_TIMER_CFG1);
writel_relaxed(0xCB732020, host->ioaddr + CORE_CSR_CDC_REFCOUNT_CFG);
writel_relaxed(0xB19, host->ioaddr + CORE_CSR_CDC_COARSE_CAL_CFG);
writel_relaxed(0x3AC, host->ioaddr + CORE_CSR_CDC_DELAY_CFG);
writel_relaxed(0x0, host->ioaddr + CORE_CDC_OFFSET_CFG);
writel_relaxed(0x16334, host->ioaddr + CORE_CDC_SLAVE_DDA_CFG);
/* CDC HW Calibration */
config = readl_relaxed(host->ioaddr + CORE_CSR_CDC_CTLR_CFG0);
config |= CORE_SW_TRIG_FULL_CALIB;
writel_relaxed(config, host->ioaddr + CORE_CSR_CDC_CTLR_CFG0);
config = readl_relaxed(host->ioaddr + CORE_CSR_CDC_CTLR_CFG0);
config &= ~CORE_SW_TRIG_FULL_CALIB;
writel_relaxed(config, host->ioaddr + CORE_CSR_CDC_CTLR_CFG0);
config = readl_relaxed(host->ioaddr + CORE_CSR_CDC_CTLR_CFG0);
config |= CORE_HW_AUTOCAL_ENA;
writel_relaxed(config, host->ioaddr + CORE_CSR_CDC_CTLR_CFG0);
config = readl_relaxed(host->ioaddr + CORE_CSR_CDC_CAL_TIMER_CFG0);
config |= CORE_TIMER_ENA;
writel_relaxed(config, host->ioaddr + CORE_CSR_CDC_CAL_TIMER_CFG0);
ret = readl_relaxed_poll_timeout(host->ioaddr + CORE_CSR_CDC_STATUS0,
calib_done,
(calib_done & CORE_CALIBRATION_DONE),
1, 50);
if (ret == -ETIMEDOUT) {
pr_err("%s: %s: CDC calibration was not completed\n",
mmc_hostname(host->mmc), __func__);
goto out;
}
ret = readl_relaxed(host->ioaddr + CORE_CSR_CDC_STATUS0)
& CORE_CDC_ERROR_CODE_MASK;
if (ret) {
pr_err("%s: %s: CDC error code %d\n",
mmc_hostname(host->mmc), __func__, ret);
ret = -EINVAL;
goto out;
}
config = readl_relaxed(host->ioaddr + CORE_DDR_200_CFG);
config |= CORE_START_CDC_TRAFFIC;
writel_relaxed(config, host->ioaddr + CORE_DDR_200_CFG);
out:
pr_debug("%s: %s: Exit, ret %d\n", mmc_hostname(host->mmc),
__func__, ret);
return ret;
}
static int sdhci_msm_execute_tuning(struct sdhci_host *host, u32 opcode) static int sdhci_msm_execute_tuning(struct sdhci_host *host, u32 opcode)
{ {
int tuning_seq_cnt = 3; int tuning_seq_cnt = 3;
...@@ -567,6 +709,15 @@ static void sdhci_msm_set_uhs_signaling(struct sdhci_host *host, ...@@ -567,6 +709,15 @@ static void sdhci_msm_set_uhs_signaling(struct sdhci_host *host,
dev_dbg(mmc_dev(mmc), "%s: clock=%u uhs=%u ctrl_2=0x%x\n", dev_dbg(mmc_dev(mmc), "%s: clock=%u uhs=%u ctrl_2=0x%x\n",
mmc_hostname(host->mmc), host->clock, uhs, ctrl_2); mmc_hostname(host->mmc), host->clock, uhs, ctrl_2);
sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
spin_unlock_irq(&host->lock);
/* CDCLP533 HW calibration is only required for HS400 mode*/
if (host->clock > CORE_FREQ_100MHZ &&
msm_host->tuning_done && !msm_host->calibration_done &&
mmc->ios.timing == MMC_TIMING_MMC_HS400)
if (!sdhci_msm_cdclp533_calibration(host))
msm_host->calibration_done = true;
spin_lock_irq(&host->lock);
} }
static void sdhci_msm_voltage_switch(struct sdhci_host *host) static void sdhci_msm_voltage_switch(struct sdhci_host *host)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment