r8169: fix WoL on shutdown if CONFIG_DEBUG_SHIRQ is set

So far phy_disconnect() is called before free_irq(). If CONFIG_DEBUG_SHIRQ
is set and interrupt is shared, then free_irq() creates an "artificial"
interrupt by calling the interrupt handler. The "link change" flag is set
in the interrupt status register, causing phylib to eventually call
phy_suspend(). Because the net_device is detached from the PHY already,
the PHY driver can't recognize that WoL is configured and powers down the
PHY.

Fixes: f1e911d5 ("r8169: add basic phylib support")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/fe732c2c-a473-9088-3974-df83cfbd6efd@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/ethernet/realtek/r8169_main.c

@@ -4704,10 +4704,10 @@ static int rtl8169_close(struct net_device *dev)
 
 	cancel_work_sync(&tp->wk.work);
 
-	phy_disconnect(tp->phydev);
-
 	free_irq(pci_irq_vector(pdev, 0), tp);
 
+	phy_disconnect(tp->phydev);
+
 	dma_free_coherent(&pdev->dev, R8169_RX_RING_BYTES, tp->RxDescArray,
 			  tp->RxPhyAddr);
 	dma_free_coherent(&pdev->dev, R8169_TX_RING_BYTES, tp->TxDescArray,