net: dsa: actually force the speed on the CPU port
[ Upstream commit 53adc9e8 ] Commit 54d792f2 ("net: dsa: Centralise global and port setup code into mv88e6xxx.") merged in the 4.2 merge window broke the link speed forcing for the CPU port of Marvell DSA switches. The original code was: /* MAC Forcing register: don't force link, speed, duplex * or flow control state to any particular values on physical * ports, but force the CPU port and all DSA ports to 1000 Mb/s * full duplex. */ if (dsa_is_cpu_port(ds, p) || ds->dsa_port_mask & (1 << p)) REG_WRITE(addr, 0x01, 0x003e); else REG_WRITE(addr, 0x01, 0x0003); but the new code does a read-modify-write: reg = _mv88e6xxx_reg_read(ds, REG_PORT(port), PORT_PCS_CTRL); if (dsa_is_cpu_port(ds, port) || ds->dsa_port_mask & (1 << port)) { reg |= PORT_PCS_CTRL_FORCE_LINK | PORT_PCS_CTRL_LINK_UP | PORT_PCS_CTRL_DUPLEX_FULL | PORT_PCS_CTRL_FORCE_DUPLEX; if (mv88e6xxx_6065_family(ds)) reg |= PORT_PCS_CTRL_100; else reg |= PORT_PCS_CTRL_1000; The link speed in the PCS control register is a two bit field. Forcing the link speed in this way doesn't ensure that the bit field is set to the correct value - on the hardware I have here, the speed bitfield remains set to 0x03, resulting in the speed not being forced to gigabit. We must clear both bits before forcing the link speed. Fixes: 54d792f2 ("net: dsa: Centralise global and port setup code into mv88e6xxx.") Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Showing
Please register or sign in to comment