Commit ccd63ce4 authored by Marc Gonzalez's avatar Marc Gonzalez Committed by Daniel Lezcano

clocksource/drivers/tango_xtal: Add new timer for Tango SoCs

Sigma Designs Tango platforms provide a 27 MHz crystal oscillator.
Use it for clocksource, sched_clock, and delay_timer.
Signed-off-by: default avatarMarc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: default avatarDaniel Lezcano <daniel.lezcano@linaro.org>
parent f1c08c9b
...@@ -279,6 +279,10 @@ config CLKSRC_MIPS_GIC ...@@ -279,6 +279,10 @@ config CLKSRC_MIPS_GIC
depends on MIPS_GIC depends on MIPS_GIC
select CLKSRC_OF select CLKSRC_OF
config CLKSRC_TANGO_XTAL
bool
select CLKSRC_OF
config CLKSRC_PXA config CLKSRC_PXA
def_bool y if ARCH_PXA || ARCH_SA1100 def_bool y if ARCH_PXA || ARCH_SA1100
select CLKSRC_OF if OF select CLKSRC_OF if OF
......
...@@ -56,6 +56,7 @@ obj-$(CONFIG_ARCH_KEYSTONE) += timer-keystone.o ...@@ -56,6 +56,7 @@ obj-$(CONFIG_ARCH_KEYSTONE) += timer-keystone.o
obj-$(CONFIG_ARCH_INTEGRATOR_AP) += timer-integrator-ap.o obj-$(CONFIG_ARCH_INTEGRATOR_AP) += timer-integrator-ap.o
obj-$(CONFIG_CLKSRC_VERSATILE) += versatile.o obj-$(CONFIG_CLKSRC_VERSATILE) += versatile.o
obj-$(CONFIG_CLKSRC_MIPS_GIC) += mips-gic-timer.o obj-$(CONFIG_CLKSRC_MIPS_GIC) += mips-gic-timer.o
obj-$(CONFIG_CLKSRC_TANGO_XTAL) += tango_xtal.o
obj-$(CONFIG_CLKSRC_IMX_GPT) += timer-imx-gpt.o obj-$(CONFIG_CLKSRC_IMX_GPT) += timer-imx-gpt.o
obj-$(CONFIG_ASM9260_TIMER) += asm9260_timer.o obj-$(CONFIG_ASM9260_TIMER) += asm9260_timer.o
obj-$(CONFIG_H8300) += h8300_timer8.o obj-$(CONFIG_H8300) += h8300_timer8.o
......
#include <linux/clocksource.h>
#include <linux/sched_clock.h>
#include <linux/of_address.h>
#include <linux/printk.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/clk.h>
static void __iomem *xtal_in_cnt;
static struct delay_timer delay_timer;
static unsigned long notrace read_xtal_counter(void)
{
return readl_relaxed(xtal_in_cnt);
}
static u64 notrace read_sched_clock(void)
{
return read_xtal_counter();
}
static cycle_t read_clocksource(struct clocksource *cs)
{
return read_xtal_counter();
}
static struct clocksource tango_xtal = {
.name = "tango-xtal",
.rating = 350,
.read = read_clocksource,
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
static void __init tango_clocksource_init(struct device_node *np)
{
struct clk *clk;
int xtal_freq, ret;
xtal_in_cnt = of_iomap(np, 0);
if (xtal_in_cnt == NULL) {
pr_err("%s: invalid address\n", np->full_name);
return;
}
clk = of_clk_get(np, 0);
if (IS_ERR(clk)) {
pr_err("%s: invalid clock\n", np->full_name);
return;
}
xtal_freq = clk_get_rate(clk);
delay_timer.freq = xtal_freq;
delay_timer.read_current_timer = read_xtal_counter;
ret = clocksource_register_hz(&tango_xtal, xtal_freq);
if (ret != 0) {
pr_err("%s: registration failed\n", np->full_name);
return;
}
sched_clock_register(read_sched_clock, 32, xtal_freq);
register_current_timer_delay(&delay_timer);
}
CLOCKSOURCE_OF_DECLARE(tango, "sigma,tick-counter", tango_clocksource_init);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment