Commit cd1faefa authored by Guenter Roeck's avatar Guenter Roeck

hwmon: (nct6775) Add support for NCT6793D

NCT6793D is register compatible with NCT6792D.

Also move nct6775_sio_names[] closer to enum kinds to simplify
adding new chips.
Tested-by: default avatarGrazvydas Ignotas <notasas@gmail.com>
Reviewed-by: default avatarJean Delvare <jdelvare@suse.de>
Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
parent 728d2940
......@@ -32,6 +32,10 @@ Supported chips:
Prefix: 'nct6792'
Addresses scanned: ISA address retrieved from Super I/O registers
Datasheet: Available from Nuvoton upon request
* Nuvoton NCT6793D
Prefix: 'nct6793'
Addresses scanned: ISA address retrieved from Super I/O registers
Datasheet: Available from Nuvoton upon request
Authors:
Guenter Roeck <linux@roeck-us.net>
......
......@@ -1140,8 +1140,8 @@ config SENSORS_NCT6775
help
If you say yes here you get support for the hardware monitoring
functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D,
NCT6791D, NCT6792D and compatible Super-I/O chips. This driver
replaces the w83627ehf driver for NCT6775F and NCT6776F.
NCT6791D, NCT6792D, NCT6793D, and compatible Super-I/O chips. This
driver replaces the w83627ehf driver for NCT6775F and NCT6776F.
This driver can also be built as a module. If so, the module
will be called nct6775.
......
......@@ -39,6 +39,7 @@
* nct6779d 15 5 5 2+6 0xc560 0xc1 0x5ca3
* nct6791d 15 6 6 2+6 0xc800 0xc1 0x5ca3
* nct6792d 15 6 6 2+6 0xc910 0xc1 0x5ca3
* nct6793d 15 6 6 2+6 0xd120 0xc1 0x5ca3
*
* #temp lists the number of monitored temperature sources (first value) plus
* the number of directly connectable temperature sensors (second value).
......@@ -63,7 +64,7 @@
#define USE_ALTERNATE
enum kinds { nct6106, nct6775, nct6776, nct6779, nct6791, nct6792 };
enum kinds { nct6106, nct6775, nct6776, nct6779, nct6791, nct6792, nct6793 };
/* used to set data->name = nct6775_device_names[data->sio_kind] */
static const char * const nct6775_device_names[] = {
......@@ -73,6 +74,17 @@ static const char * const nct6775_device_names[] = {
"nct6779",
"nct6791",
"nct6792",
"nct6793",
};
static const char * const nct6775_sio_names[] __initconst = {
"NCT6106D",
"NCT6775F",
"NCT6776D/F",
"NCT6779D",
"NCT6791D",
"NCT6792D",
"NCT6793D",
};
static unsigned short force_id;
......@@ -104,6 +116,7 @@ MODULE_PARM_DESC(fan_debounce, "Enable debouncing for fan RPM signal");
#define SIO_NCT6779_ID 0xc560
#define SIO_NCT6791_ID 0xc800
#define SIO_NCT6792_ID 0xc910
#define SIO_NCT6793_ID 0xd120
#define SIO_ID_MASK 0xFFF0
enum pwm_enable { off, manual, thermal_cruise, speed_cruise, sf3, sf4 };
......@@ -537,7 +550,7 @@ static const s8 NCT6791_ALARM_BITS[] = {
4, 5, 13, -1, -1, -1, /* temp1..temp6 */
12, 9 }; /* intrusion0, intrusion1 */
/* NCT6792 specific data */
/* NCT6792/NCT6793 specific data */
static const u16 NCT6792_REG_TEMP_MON[] = {
0x73, 0x75, 0x77, 0x79, 0x7b, 0x7d };
......@@ -1060,6 +1073,7 @@ static bool is_word_sized(struct nct6775_data *data, u16 reg)
case nct6779:
case nct6791:
case nct6792:
case nct6793:
return reg == 0x150 || reg == 0x153 || reg == 0x155 ||
((reg & 0xfff0) == 0x4b0 && (reg & 0x000f) < 0x0b) ||
reg == 0x402 ||
......@@ -1411,6 +1425,7 @@ static void nct6775_update_pwm_limits(struct device *dev)
case nct6779:
case nct6791:
case nct6792:
case nct6793:
reg = nct6775_read_value(data,
data->REG_CRITICAL_PWM_ENABLE[i]);
if (reg & data->CRITICAL_PWM_ENABLE_MASK)
......@@ -2826,6 +2841,7 @@ store_auto_pwm(struct device *dev, struct device_attribute *attr,
case nct6779:
case nct6791:
case nct6792:
case nct6793:
nct6775_write_value(data, data->REG_CRITICAL_PWM[nr],
val);
reg = nct6775_read_value(data,
......@@ -3260,7 +3276,7 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
pwm4pin = false;
pwm5pin = false;
pwm6pin = false;
} else { /* NCT6779D, NCT6791D, or NCT6792D */
} else { /* NCT6779D, NCT6791D, NCT6792D, or NCT6793D */
regval = superio_inb(sioreg, 0x1c);
fan3pin = !(regval & (1 << 5));
......@@ -3273,7 +3289,8 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
fan4min = fan4pin;
if (data->kind == nct6791 || data->kind == nct6792) {
if (data->kind == nct6791 || data->kind == nct6792 ||
data->kind == nct6793) {
regval = superio_inb(sioreg, 0x2d);
fan6pin = (regval & (1 << 1));
pwm6pin = (regval & (1 << 0));
......@@ -3647,6 +3664,7 @@ static int nct6775_probe(struct platform_device *pdev)
break;
case nct6791:
case nct6792:
case nct6793:
data->in_num = 15;
data->pwm_num = 6;
data->auto_pwm_num = 4;
......@@ -3922,6 +3940,7 @@ static int nct6775_probe(struct platform_device *pdev)
case nct6779:
case nct6791:
case nct6792:
case nct6793:
break;
}
......@@ -3954,6 +3973,7 @@ static int nct6775_probe(struct platform_device *pdev)
break;
case nct6791:
case nct6792:
case nct6793:
tmp |= 0x7e;
break;
}
......@@ -4051,7 +4071,8 @@ static int __maybe_unused nct6775_resume(struct device *dev)
if (reg != data->sio_reg_enable)
superio_outb(sioreg, SIO_REG_ENABLE, data->sio_reg_enable);
if (data->kind == nct6791 || data->kind == nct6792)
if (data->kind == nct6791 || data->kind == nct6792 ||
data->kind == nct6793)
nct6791_enable_io_mapping(sioreg);
superio_exit(sioreg);
......@@ -4110,15 +4131,6 @@ static struct platform_driver nct6775_driver = {
.probe = nct6775_probe,
};
static const char * const nct6775_sio_names[] __initconst = {
"NCT6106D",
"NCT6775F",
"NCT6776D/F",
"NCT6779D",
"NCT6791D",
"NCT6792D",
};
/* nct6775_find() looks for a '627 in the Super-I/O config space */
static int __init nct6775_find(int sioaddr, struct nct6775_sio_data *sio_data)
{
......@@ -4154,6 +4166,9 @@ static int __init nct6775_find(int sioaddr, struct nct6775_sio_data *sio_data)
case SIO_NCT6792_ID:
sio_data->kind = nct6792;
break;
case SIO_NCT6793_ID:
sio_data->kind = nct6793;
break;
default:
if (val != 0xffff)
pr_debug("unsupported chip ID: 0x%04x\n", val);
......@@ -4179,7 +4194,8 @@ static int __init nct6775_find(int sioaddr, struct nct6775_sio_data *sio_data)
superio_outb(sioaddr, SIO_REG_ENABLE, val | 0x01);
}
if (sio_data->kind == nct6791 || sio_data->kind == nct6792)
if (sio_data->kind == nct6791 || sio_data->kind == nct6792 ||
sio_data->kind == nct6793)
nct6791_enable_io_mapping(sioaddr);
superio_exit(sioaddr);
......@@ -4289,7 +4305,7 @@ static void __exit sensors_nct6775_exit(void)
}
MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
MODULE_DESCRIPTION("NCT6106D/NCT6775F/NCT6776F/NCT6779D/NCT6791D/NCT6792D driver");
MODULE_DESCRIPTION("Driver for NCT6775F and compatible chips");
MODULE_LICENSE("GPL");
module_init(sensors_nct6775_init);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment