Merge tag 'timers-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer updates from Thomas Gleixner:
 "Time, timekeeping and related device driver updates:

  Core:

   - A set of fixes, cleanups and enhancements to the posix timer code:

       - Prevent another possible live lock scenario in the exit() path,
         which affects POSIX_CPU_TIMERS_TASK_WORK enabled architectures.

       - Fix a loop termination issue which was reported syzcaller/KSAN
         in the posix timer ID allocation code.

         That triggered a deeper look into the posix-timer code which
         unearthed more small issues.

       - Add missing READ/WRITE_ONCE() annotations

       - Fix or remove completely outdated comments

       - Document places which are subtle and completely undocumented.

   - Add missing hrtimer modes to the trace event decoder

   - Small cleanups and enhancements all over the place

  Drivers:

   - Rework the Hyper-V clocksource and sched clock setup code

   - Remove a deprecated clocksource driver

   - Small fixes and enhancements all over the place"

* tag 'timers-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
  clocksource/drivers/cadence-ttc: Fix memory leak in ttc_timer_probe
  dt-bindings: timers: Add Ralink SoCs timer
  clocksource/drivers/hyper-v: Rework clocksource and sched clock setup
  dt-bindings: timer: brcm,kona-timer: convert to YAML
  clocksource/drivers/imx-gpt: Fold <soc/imx/timer.h> into its only user
  clk: imx: Drop inclusion of unused header <soc/imx/timer.h>
  hrtimer: Add missing sparse annotations to hrtimer locking
  clocksource/drivers/imx-gpt: Use only a single name for functions
  clocksource/drivers/loongson1: Move PWM timer to clocksource framework
  dt-bindings: timer: Add Loongson-1 clocksource
  MIPS: Loongson32: Remove deprecated PWM timer clocksource
  clocksource/drivers/ingenic-timer: Use pm_sleep_ptr() macro
  tracing/timer: Add missing hrtimer modes to decode_hrtimer_mode().
  posix-timers: Add sys_ni_posix_timers() prototype
  tick/rcu: Fix bogus ratelimit condition
  alarmtimer: Remove unnecessary (void *) cast
  alarmtimer: Remove unnecessary initialization of variable 'ret'
  posix-timers: Refer properly to CONFIG_HIGH_RES_TIMERS
  posix-timers: Polish coding style in a few places
  posix-timers: Remove pointless comments
  ...

Documentation/devicetree/bindings/timer/brcm,kona-timer.txt

-Broadcom Kona Family timer
------------------------------------------------------
-This timer is used in the following Broadcom SoCs:
- BCM11130, BCM11140, BCM11351, BCM28145, BCM28155
-
-Required properties:
-- compatible : "brcm,kona-timer"
-- DEPRECATED: compatible : "bcm,kona-timer"
-- reg : Register range for the timer
-- interrupts : interrupt for the timer
-- clocks: phandle + clock specifier pair of the external clock
-- clock-frequency: frequency that the clock operates
-
-Only one of clocks or clock-frequency should be specified.
-
-Refer to clocks/clock-bindings.txt for generic clock consumer properties.
-
-Example:
-	timer@35006000 {
-		compatible = "brcm,kona-timer";
-		reg = <0x35006000 0x1000>;
-		interrupts = <0x0 7 0x4>;
-		clocks = <&hub_timer_clk>;
-	};
-

Documentation/devicetree/bindings/timer/brcm,kona-timer.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/brcm,kona-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Kona family timer
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    const: brcm,kona-timer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency: true
+
+oneOf:
+  - required:
+      - clocks
+  - required:
+      - clock-frequency
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/bcm281xx.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    timer@35006000 {
+        compatible = "brcm,kona-timer";
+        reg = <0x35006000 0x1000>;
+        interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&aon_ccu BCM281XX_AON_CCU_HUB_TIMER>;
+    };
+...

Documentation/devicetree/bindings/timer/loongson,ls1x-pwmtimer.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/loongson,ls1x-pwmtimer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-1 PWM timer
+
+maintainers:
+  - Keguang Zhang <keguang.zhang@gmail.com>
+
+description:
+  Loongson-1 PWM timer can be used for system clock source
+  and clock event timers.
+
+properties:
+  compatible:
+    const: loongson,ls1b-pwmtimer
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/loongson,ls1x-clk.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    clocksource: timer@1fe5c030 {
+        compatible = "loongson,ls1b-pwmtimer";
+        reg = <0x1fe5c030 0x10>;
+
+        clocks = <&clkc LS1X_CLKID_APB>;
+        interrupt-parent = <&intc0>;
+        interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+    };

Documentation/devicetree/bindings/timer/ralink,rt2880-timer.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/ralink,rt2880-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Timer present in Ralink family SoCs
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+properties:
+  compatible:
+    const: ralink,rt2880-timer
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    timer@100 {
+        compatible = "ralink,rt2880-timer";
+        reg = <0x100 0x20>;
+
+        clocks = <&sysc 3>;
+
+        interrupt-parent = <&intc>;
+        interrupts = <1>;
+    };
+...

arch/alpha/kernel/osf_sys.c

@@ -1014,8 +1014,6 @@ SYSCALL_DEFINE2(osf_settimeofday, struct timeval32 __user *, tv,
 	return do_sys_settimeofday64(tv ? &kts : NULL, tz ? &ktz : NULL);
 }
 
-asmlinkage long sys_ni_posix_timers(void);
-
 SYSCALL_DEFINE2(osf_utimes, const char __user *, filename,
 		struct timeval32 __user *, tvs)
 {

arch/mips/include/asm/mach-loongson32/loongson1.h

@@ -47,7 +47,6 @@
 
 #include <regs-clk.h>
 #include <regs-mux.h>
-#include <regs-pwm.h>
 #include <regs-rtc.h>
 #include <regs-wdt.h>
 

arch/mips/include/asm/mach-loongson32/regs-pwm.h

-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (c) 2014 Zhang, Keguang <keguang.zhang@gmail.com>
- *
- * Loongson 1 PWM Register Definitions.
- */
-
-#ifndef __ASM_MACH_LOONGSON32_REGS_PWM_H
-#define __ASM_MACH_LOONGSON32_REGS_PWM_H
-
-/* Loongson 1 PWM Timer Register Definitions */
-#define PWM_CNT			0x0
-#define PWM_HRC			0x4
-#define PWM_LRC			0x8
-#define PWM_CTRL		0xc
-
-/* PWM Control Register Bits */
-#define CNT_RST			BIT(7)
-#define INT_SR			BIT(6)
-#define INT_EN			BIT(5)
-#define PWM_SINGLE		BIT(4)
-#define PWM_OE			BIT(3)
-#define CNT_EN			BIT(0)
-
-#endif /* __ASM_MACH_LOONGSON32_REGS_PWM_H */

arch/mips/loongson32/Kconfig

@@ -35,41 +35,4 @@ config LOONGSON1_LS1C
 	select COMMON_CLK
 endchoice
 
-menuconfig CEVT_CSRC_LS1X
-	bool "Use PWM Timer for clockevent/clocksource"
-	select MIPS_EXTERNAL_TIMER
-	depends on CPU_LOONGSON32
-	help
-	  This option changes the default clockevent/clocksource to PWM Timer,
-	  and is required by Loongson1 CPUFreq support.
-
-	  If unsure, say N.
-
-choice
-	prompt "Select clockevent/clocksource"
-	depends on CEVT_CSRC_LS1X
-	default TIMER_USE_PWM0
-
-config TIMER_USE_PWM0
-	bool "Use PWM Timer 0"
-	help
-	  Use PWM Timer 0 as the default clockevent/clocksourcer.
-
-config TIMER_USE_PWM1
-	bool "Use PWM Timer 1"
-	help
-	  Use PWM Timer 1 as the default clockevent/clocksourcer.
-
-config TIMER_USE_PWM2
-	bool "Use PWM Timer 2"
-	help
-	  Use PWM Timer 2 as the default clockevent/clocksourcer.
-
-config TIMER_USE_PWM3
-	bool "Use PWM Timer 3"
-	help
-	  Use PWM Timer 3 as the default clockevent/clocksourcer.
-
-endchoice
-
 endif # MACH_LOONGSON32

arch/mips/loongson32/common/time.c

@@ -5,208 +5,8 @@
 
 #include <linux/clk.h>
 #include <linux/of_clk.h>
-#include <linux/interrupt.h>
-#include <linux/sizes.h>
 #include <asm/time.h>
 
-#include <loongson1.h>
-#include <platform.h>
-
-#ifdef CONFIG_CEVT_CSRC_LS1X
-
-#if defined(CONFIG_TIMER_USE_PWM1)
-#define LS1X_TIMER_BASE	LS1X_PWM1_BASE
-#define LS1X_TIMER_IRQ	LS1X_PWM1_IRQ
-
-#elif defined(CONFIG_TIMER_USE_PWM2)
-#define LS1X_TIMER_BASE	LS1X_PWM2_BASE
-#define LS1X_TIMER_IRQ	LS1X_PWM2_IRQ
-
-#elif defined(CONFIG_TIMER_USE_PWM3)
-#define LS1X_TIMER_BASE	LS1X_PWM3_BASE
-#define LS1X_TIMER_IRQ	LS1X_PWM3_IRQ
-
-#else
-#define LS1X_TIMER_BASE	LS1X_PWM0_BASE
-#define LS1X_TIMER_IRQ	LS1X_PWM0_IRQ
-#endif
-
-DEFINE_RAW_SPINLOCK(ls1x_timer_lock);
-
-static void __iomem *timer_reg_base;
-static uint32_t ls1x_jiffies_per_tick;
-
-static inline void ls1x_pwmtimer_set_period(uint32_t period)
-{
-	__raw_writel(period, timer_reg_base + PWM_HRC);
-	__raw_writel(period, timer_reg_base + PWM_LRC);
-}
-
-static inline void ls1x_pwmtimer_restart(void)
-{
-	__raw_writel(0x0, timer_reg_base + PWM_CNT);
-	__raw_writel(INT_EN | CNT_EN, timer_reg_base + PWM_CTRL);
-}
-
-void __init ls1x_pwmtimer_init(void)
-{
-	timer_reg_base = ioremap(LS1X_TIMER_BASE, SZ_16);
-	if (!timer_reg_base)
-		panic("Failed to remap timer registers");
-
-	ls1x_jiffies_per_tick = DIV_ROUND_CLOSEST(mips_hpt_frequency, HZ);
-
-	ls1x_pwmtimer_set_period(ls1x_jiffies_per_tick);
-	ls1x_pwmtimer_restart();
-}
-
-static u64 ls1x_clocksource_read(struct clocksource *cs)
-{
-	unsigned long flags;
-	int count;
-	u32 jifs;
-	static int old_count;
-	static u32 old_jifs;
-
-	raw_spin_lock_irqsave(&ls1x_timer_lock, flags);
-	/*
-	 * Although our caller may have the read side of xtime_lock,
-	 * this is now a seqlock, and we are cheating in this routine
-	 * by having side effects on state that we cannot undo if
-	 * there is a collision on the seqlock and our caller has to
-	 * retry.  (Namely, old_jifs and old_count.)  So we must treat
-	 * jiffies as volatile despite the lock.  We read jiffies
-	 * before latching the timer count to guarantee that although
-	 * the jiffies value might be older than the count (that is,
-	 * the counter may underflow between the last point where
-	 * jiffies was incremented and the point where we latch the
-	 * count), it cannot be newer.
-	 */
-	jifs = jiffies;
-	/* read the count */
-	count = __raw_readl(timer_reg_base + PWM_CNT);
-
-	/*
-	 * It's possible for count to appear to go the wrong way for this
-	 * reason:
-	 *
-	 *  The timer counter underflows, but we haven't handled the resulting
-	 *  interrupt and incremented jiffies yet.
-	 *
-	 * Previous attempts to handle these cases intelligently were buggy, so
-	 * we just do the simple thing now.
-	 */
-	if (count < old_count && jifs == old_jifs)
-		count = old_count;
-
-	old_count = count;
-	old_jifs = jifs;
-
-	raw_spin_unlock_irqrestore(&ls1x_timer_lock, flags);
-
-	return (u64) (jifs * ls1x_jiffies_per_tick) + count;
-}
-
-static struct clocksource ls1x_clocksource = {
-	.name		= "ls1x-pwmtimer",
-	.read		= ls1x_clocksource_read,
-	.mask		= CLOCKSOURCE_MASK(24),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static irqreturn_t ls1x_clockevent_isr(int irq, void *devid)
-{
-	struct clock_event_device *cd = devid;
-
-	ls1x_pwmtimer_restart();
-	cd->event_handler(cd);
-
-	return IRQ_HANDLED;
-}
-
-static int ls1x_clockevent_set_state_periodic(struct clock_event_device *cd)
-{
-	raw_spin_lock(&ls1x_timer_lock);
-	ls1x_pwmtimer_set_period(ls1x_jiffies_per_tick);
-	ls1x_pwmtimer_restart();
-	__raw_writel(INT_EN | CNT_EN, timer_reg_base + PWM_CTRL);
-	raw_spin_unlock(&ls1x_timer_lock);
-
-	return 0;
-}
-
-static int ls1x_clockevent_tick_resume(struct clock_event_device *cd)
-{
-	raw_spin_lock(&ls1x_timer_lock);
-	__raw_writel(INT_EN | CNT_EN, timer_reg_base + PWM_CTRL);
-	raw_spin_unlock(&ls1x_timer_lock);
-
-	return 0;
-}
-
-static int ls1x_clockevent_set_state_shutdown(struct clock_event_device *cd)
-{
-	raw_spin_lock(&ls1x_timer_lock);
-	__raw_writel(__raw_readl(timer_reg_base + PWM_CTRL) & ~CNT_EN,
-		     timer_reg_base + PWM_CTRL);
-	raw_spin_unlock(&ls1x_timer_lock);
-
-	return 0;
-}
-
-static int ls1x_clockevent_set_next(unsigned long evt,
-				    struct clock_event_device *cd)
-{
-	raw_spin_lock(&ls1x_timer_lock);
-	ls1x_pwmtimer_set_period(evt);
-	ls1x_pwmtimer_restart();
-	raw_spin_unlock(&ls1x_timer_lock);
-
-	return 0;
-}
-
-static struct clock_event_device ls1x_clockevent = {
-	.name			= "ls1x-pwmtimer",
-	.features		= CLOCK_EVT_FEAT_PERIODIC,
-	.rating			= 300,
-	.irq			= LS1X_TIMER_IRQ,
-	.set_next_event		= ls1x_clockevent_set_next,
-	.set_state_shutdown	= ls1x_clockevent_set_state_shutdown,
-	.set_state_periodic	= ls1x_clockevent_set_state_periodic,
-	.set_state_oneshot	= ls1x_clockevent_set_state_shutdown,
-	.tick_resume		= ls1x_clockevent_tick_resume,
-};
-
-static void __init ls1x_time_init(void)
-{
-	struct clock_event_device *cd = &ls1x_clockevent;
-	int ret;
-
-	if (!mips_hpt_frequency)
-		panic("Invalid timer clock rate");
-
-	ls1x_pwmtimer_init();
-
-	clockevent_set_clock(cd, mips_hpt_frequency);
-	cd->max_delta_ns = clockevent_delta2ns(0xffffff, cd);
-	cd->max_delta_ticks = 0xffffff;
-	cd->min_delta_ns = clockevent_delta2ns(0x000300, cd);
-	cd->min_delta_ticks = 0x000300;
-	cd->cpumask = cpumask_of(smp_processor_id());
-	clockevents_register_device(cd);
-
-	ls1x_clocksource.rating = 200 + mips_hpt_frequency / 10000000;
-	ret = clocksource_register_hz(&ls1x_clocksource, mips_hpt_frequency);
-	if (ret)
-		panic(KERN_ERR "Failed to register clocksource: %d\n", ret);
-
-	if (request_irq(LS1X_TIMER_IRQ, ls1x_clockevent_isr,
-			IRQF_PERCPU | IRQF_TIMER, "ls1x-pwmtimer",
-			&ls1x_clockevent))
-		pr_err("Failed to register ls1x-pwmtimer interrupt\n");
-}
-#endif /* CONFIG_CEVT_CSRC_LS1X */
-
 void __init plat_time_init(void)
 {
 	struct clk *clk = NULL;
@@ -214,20 +14,10 @@ void __init plat_time_init(void)
 	/* initialize LS1X clocks */
 	of_clk_init(NULL);
 
-#ifdef CONFIG_CEVT_CSRC_LS1X
-	/* setup LS1X PWM timer */
-	clk = clk_get(NULL, "ls1x-pwmtimer");
-	if (IS_ERR(clk))
-		panic("unable to get timer clock, err=%ld", PTR_ERR(clk));
-
-	mips_hpt_frequency = clk_get_rate(clk);
-	ls1x_time_init();
-#else
 	/* setup mips r4k timer */
 	clk = clk_get(NULL, "cpu_clk");
 	if (IS_ERR(clk))
 		panic("unable to get cpu clock, err=%ld", PTR_ERR(clk));
 
 	mips_hpt_frequency = clk_get_rate(clk) / 2;
-#endif /* CONFIG_CEVT_CSRC_LS1X */
 }

drivers/clk/imx/clk-imx1.c

@@ -10,7 +10,6 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <dt-bindings/clock/imx1-clock.h>
-#include <soc/imx/timer.h>
 #include <asm/irq.h>
 
 #include "clk.h"

drivers/clk/imx/clk-imx27.c

@@ -8,7 +8,6 @@
 #include <linux/of_address.h>
 #include <dt-bindings/clock/imx27-clock.h>
 #include <soc/imx/revision.h>
-#include <soc/imx/timer.h>
 #include <asm/irq.h>
 
 #include "clk.h"

drivers/clk/imx/clk-imx31.c

@@ -11,7 +11,6 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <soc/imx/revision.h>
-#include <soc/imx/timer.h>
 #include <asm/irq.h>
 
 #include "clk.h"

drivers/clk/imx/clk-imx35.c

@@ -10,7 +10,6 @@
 #include <linux/of.h>
 #include <linux/err.h>
 #include <soc/imx/revision.h>
-#include <soc/imx/timer.h>
 #include <asm/irq.h>
 
 #include "clk.h"

drivers/clocksource/Kconfig

@@ -612,6 +612,15 @@ config TIMER_IMX_SYS_CTR
 	  Enable this option to use i.MX system counter timer as a
 	  clockevent.
 
+config CLKSRC_LOONGSON1_PWM
+	bool "Clocksource using Loongson1 PWM"
+	depends on MACH_LOONGSON32 || COMPILE_TEST
+	select MIPS_EXTERNAL_TIMER
+	select TIMER_OF
+	help
+	  Enable this option to use Loongson1 PWM timer as clocksource
+	  instead of the performance counter.
+
 config CLKSRC_ST_LPC
 	bool "Low power clocksource found in the LPC" if COMPILE_TEST
 	select TIMER_OF if OF

drivers/clocksource/Makefile

@@ -89,3 +89,4 @@ obj-$(CONFIG_MICROCHIP_PIT64B)		+= timer-microchip-pit64b.o
 obj-$(CONFIG_MSC313E_TIMER)		+= timer-msc313e.o
 obj-$(CONFIG_GOLDFISH_TIMER)		+= timer-goldfish.o
 obj-$(CONFIG_GXP_TIMER)			+= timer-gxp.o
+obj-$(CONFIG_CLKSRC_LOONGSON1_PWM)	+= timer-loongson1-pwm.o

drivers/clocksource/hyperv_timer.c

@@ -475,15 +475,9 @@ static u64 notrace read_hv_clock_msr_cs(struct clocksource *arg)
 	return read_hv_clock_msr();
 }
 
-static u64 notrace read_hv_sched_clock_msr(void)
-{
-	return (read_hv_clock_msr() - hv_sched_clock_offset) *
-		(NSEC_PER_SEC / HV_CLOCK_HZ);
-}
-
 static struct clocksource hyperv_cs_msr = {
 	.name	= "hyperv_clocksource_msr",
-	.rating	= 500,
+	.rating	= 495,
 	.read	= read_hv_clock_msr_cs,
 	.mask	= CLOCKSOURCE_MASK(64),
 	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
@@ -513,7 +507,7 @@ static __always_inline void hv_setup_sched_clock(void *sched_clock)
 static __always_inline void hv_setup_sched_clock(void *sched_clock) {}
 #endif /* CONFIG_GENERIC_SCHED_CLOCK */
 
-static bool __init hv_init_tsc_clocksource(void)
+static void __init hv_init_tsc_clocksource(void)
 {
 	union hv_reference_tsc_msr tsc_msr;
 
@@ -524,17 +518,14 @@ static bool __init hv_init_tsc_clocksource(void)
 	 * Hyper-V Reference TSC rating, causing the generic TSC to be used.
 	 * TSC_INVARIANT is not offered on ARM64, so the Hyper-V Reference
 	 * TSC will be preferred over the virtualized ARM64 arch counter.
-	 * While the Hyper-V MSR clocksource won't be used since the
-	 * Reference TSC clocksource is present, change its rating as
-	 * well for consistency.
 	 */
 	if (ms_hyperv.features & HV_ACCESS_TSC_INVARIANT) {
 		hyperv_cs_tsc.rating = 250;
-		hyperv_cs_msr.rating = 250;
+		hyperv_cs_msr.rating = 245;
 	}
 
 	if (!(ms_hyperv.features & HV_MSR_REFERENCE_TSC_AVAILABLE))
-		return false;
+		return;
 
 	hv_read_reference_counter = read_hv_clock_tsc;
 
@@ -565,33 +556,34 @@ static bool __init hv_init_tsc_clocksource(void)
 
 	clocksource_register_hz(&hyperv_cs_tsc, NSEC_PER_SEC/100);
 
-	hv_sched_clock_offset = hv_read_reference_counter();
-	hv_setup_sched_clock(read_hv_sched_clock_tsc);
-
-	return true;
+	/*
+	 * If TSC is invariant, then let it stay as the sched clock since it
+	 * will be faster than reading the TSC page. But if not invariant, use
+	 * the TSC page so that live migrations across hosts with different
+	 * frequencies is handled correctly.
+	 */
+	if (!(ms_hyperv.features & HV_ACCESS_TSC_INVARIANT)) {
+		hv_sched_clock_offset = hv_read_reference_counter();
+		hv_setup_sched_clock(read_hv_sched_clock_tsc);
+	}
 }
 
 void __init hv_init_clocksource(void)
 {
 	/*
-	 * Try to set up the TSC page clocksource. If it succeeds, we're
-	 * done. Otherwise, set up the MSR clocksource.  At least one of
-	 * these will always be available except on very old versions of
-	 * Hyper-V on x86.  In that case we won't have a Hyper-V
+	 * Try to set up the TSC page clocksource, then the MSR clocksource.
+	 * At least one of these will always be available except on very old
+	 * versions of Hyper-V on x86.  In that case we won't have a Hyper-V
 	 * clocksource, but Linux will still run with a clocksource based
 	 * on the emulated PIT or LAPIC timer.
+	 *
+	 * Never use the MSR clocksource as sched clock.  It's too slow.
+	 * Better to use the native sched clock as the fallback.
 	 */
-	if (hv_init_tsc_clocksource())
-		return;
-
-	if (!(ms_hyperv.features & HV_MSR_TIME_REF_COUNT_AVAILABLE))
-		return;
-
-	hv_read_reference_counter = read_hv_clock_msr;
-	clocksource_register_hz(&hyperv_cs_msr, NSEC_PER_SEC/100);
+	hv_init_tsc_clocksource();
 
-	hv_sched_clock_offset = hv_read_reference_counter();
-	hv_setup_sched_clock(read_hv_sched_clock_msr);
+	if (ms_hyperv.features & HV_MSR_TIME_REF_COUNT_AVAILABLE)
+		clocksource_register_hz(&hyperv_cs_msr, NSEC_PER_SEC/100);
 }
 
 void __init hv_remap_tsc_clocksource(void)

drivers/clocksource/ingenic-timer.c

@@ -369,7 +369,7 @@ static int __init ingenic_tcu_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int __maybe_unused ingenic_tcu_suspend(struct device *dev)
+static int ingenic_tcu_suspend(struct device *dev)
 {
 	struct ingenic_tcu *tcu = dev_get_drvdata(dev);
 	unsigned int cpu;
@@ -382,7 +382,7 @@ static int __maybe_unused ingenic_tcu_suspend(struct device *dev)
 	return 0;
 }
 
-static int __maybe_unused ingenic_tcu_resume(struct device *dev)
+static int ingenic_tcu_resume(struct device *dev)
 {
 	struct ingenic_tcu *tcu = dev_get_drvdata(dev);
 	unsigned int cpu;
@@ -406,7 +406,7 @@ static int __maybe_unused ingenic_tcu_resume(struct device *dev)
 	return ret;
 }
 
-static const struct dev_pm_ops __maybe_unused ingenic_tcu_pm_ops = {
+static const struct dev_pm_ops ingenic_tcu_pm_ops = {
 	/* _noirq: We want the TCU clocks to be gated last / ungated first */
 	.suspend_noirq = ingenic_tcu_suspend,
 	.resume_noirq  = ingenic_tcu_resume,
@@ -415,9 +415,7 @@ static const struct dev_pm_ops __maybe_unused ingenic_tcu_pm_ops = {
 static struct platform_driver ingenic_tcu_driver = {
 	.driver = {
 		.name	= "ingenic-tcu-timer",
-#ifdef CONFIG_PM_SLEEP
-		.pm	= &ingenic_tcu_pm_ops,
-#endif
+		.pm	= pm_sleep_ptr(&ingenic_tcu_pm_ops),
 		.of_match_table = ingenic_tcu_of_match,
 	},
 };

drivers/clocksource/timer-cadence-ttc.c

@@ -486,10 +486,10 @@ static int __init ttc_timer_probe(struct platform_device *pdev)
 	 * and use it. Note that the event timer uses the interrupt and it's the
 	 * 2nd TTC hence the irq_of_parse_and_map(,1)
 	 */
-	timer_baseaddr = of_iomap(timer, 0);
-	if (!timer_baseaddr) {
+	timer_baseaddr = devm_of_iomap(&pdev->dev, timer, 0, NULL);
+	if (IS_ERR(timer_baseaddr)) {
 		pr_err("ERROR: invalid timer base address\n");
-		return -ENXIO;
+		return PTR_ERR(timer_baseaddr);
 	}
 
 	irq = irq_of_parse_and_map(timer, 1);
@@ -513,20 +513,27 @@ static int __init ttc_timer_probe(struct platform_device *pdev)
 	clk_ce = of_clk_get(timer, clksel);
 	if (IS_ERR(clk_ce)) {
 		pr_err("ERROR: timer input clock not found\n");
-		return PTR_ERR(clk_ce);
+		ret = PTR_ERR(clk_ce);
+		goto put_clk_cs;
 	}
 
 	ret = ttc_setup_clocksource(clk_cs, timer_baseaddr, timer_width);
 	if (ret)
-		return ret;
+		goto put_clk_ce;
 
 	ret = ttc_setup_clockevent(clk_ce, timer_baseaddr + 4, irq);
 	if (ret)
-		return ret;
+		goto put_clk_ce;
 
 	pr_info("%pOFn #0 at %p, irq=%d\n", timer, timer_baseaddr, irq);
 
 	return 0;
+
+put_clk_ce:
+	clk_put(clk_ce);
+put_clk_cs:
+	clk_put(clk_cs);
+	return ret;
 }
 
 static const struct of_device_id ttc_timer_of_match[] = {

drivers/clocksource/timer-imx-gpt.c

@@ -16,7 +16,6 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
-#include <soc/imx/timer.h>
 
 /*
  * There are 4 versions of the timer hardware on Freescale MXC hardware.
@@ -25,6 +24,12 @@
  *  - MX25, MX31, MX35, MX37, MX51, MX6Q(rev1.0)
  *  - MX6DL, MX6SX, MX6Q(rev1.1+)
  */
+enum imx_gpt_type {
+	GPT_TYPE_IMX1,		/* i.MX1 */
+	GPT_TYPE_IMX21,		/* i.MX21/27 */
+	GPT_TYPE_IMX31,		/* i.MX31/35/25/37/51/6Q */
+	GPT_TYPE_IMX6DL,	/* i.MX6DL/SX/SL */
+};
 
 /* defines common for all i.MX */
 #define MXC_TCTL		0x00
@@ -93,13 +98,11 @@ static void imx1_gpt_irq_disable(struct imx_timer *imxtm)
 	tmp = readl_relaxed(imxtm->base + MXC_TCTL);
 	writel_relaxed(tmp & ~MX1_2_TCTL_IRQEN, imxtm->base + MXC_TCTL);
 }
-#define imx21_gpt_irq_disable imx1_gpt_irq_disable
 
 static void imx31_gpt_irq_disable(struct imx_timer *imxtm)
 {
 	writel_relaxed(0, imxtm->base + V2_IR);
 }
-#define imx6dl_gpt_irq_disable imx31_gpt_irq_disable
 
 static void imx1_gpt_irq_enable(struct imx_timer *imxtm)
 {
@@ -108,13 +111,11 @@ static void imx1_gpt_irq_enable(struct imx_timer *imxtm)
 	tmp = readl_relaxed(imxtm->base + MXC_TCTL);
 	writel_relaxed(tmp | MX1_2_TCTL_IRQEN, imxtm->base + MXC_TCTL);
 }
-#define imx21_gpt_irq_enable imx1_gpt_irq_enable
 
 static void imx31_gpt_irq_enable(struct imx_timer *imxtm)
 {
 	writel_relaxed(1<<0, imxtm->base + V2_IR);
 }
-#define imx6dl_gpt_irq_enable imx31_gpt_irq_enable
 
 static void imx1_gpt_irq_acknowledge(struct imx_timer *imxtm)
 {
@@ -131,7 +132,6 @@ static void imx31_gpt_irq_acknowledge(struct imx_timer *imxtm)
 {
 	writel_relaxed(V2_TSTAT_OF1, imxtm->base + V2_TSTAT);
 }
-#define imx6dl_gpt_irq_acknowledge imx31_gpt_irq_acknowledge
 
 static void __iomem *sched_clock_reg;
 
@@ -296,7 +296,6 @@ static void imx1_gpt_setup_tctl(struct imx_timer *imxtm)
 	tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
 	writel_relaxed(tctl_val, imxtm->base + MXC_TCTL);
 }
-#define imx21_gpt_setup_tctl imx1_gpt_setup_tctl
 
 static void imx31_gpt_setup_tctl(struct imx_timer *imxtm)
 {
@@ -343,10 +342,10 @@ static const struct imx_gpt_data imx21_gpt_data = {
 	.reg_tstat = MX1_2_TSTAT,
 	.reg_tcn = MX1_2_TCN,
 	.reg_tcmp = MX1_2_TCMP,
-	.gpt_irq_enable = imx21_gpt_irq_enable,
-	.gpt_irq_disable = imx21_gpt_irq_disable,
+	.gpt_irq_enable = imx1_gpt_irq_enable,
+	.gpt_irq_disable = imx1_gpt_irq_disable,
 	.gpt_irq_acknowledge = imx21_gpt_irq_acknowledge,
-	.gpt_setup_tctl = imx21_gpt_setup_tctl,
+	.gpt_setup_tctl = imx1_gpt_setup_tctl,
 	.set_next_event = mx1_2_set_next_event,
 };
 
@@ -365,9 +364,9 @@ static const struct imx_gpt_data imx6dl_gpt_data = {
 	.reg_tstat = V2_TSTAT,
 	.reg_tcn = V2_TCN,
 	.reg_tcmp = V2_TCMP,
-	.gpt_irq_enable = imx6dl_gpt_irq_enable,
-	.gpt_irq_disable = imx6dl_gpt_irq_disable,
-	.gpt_irq_acknowledge = imx6dl_gpt_irq_acknowledge,
+	.gpt_irq_enable = imx31_gpt_irq_enable,
+	.gpt_irq_disable = imx31_gpt_irq_disable,
+	.gpt_irq_acknowledge = imx31_gpt_irq_acknowledge,
 	.gpt_setup_tctl = imx6dl_gpt_setup_tctl,
 	.set_next_event = v2_set_next_event,
 };

drivers/clocksource/timer-loongson1-pwm.c

+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Clocksource driver for Loongson-1 SoC
+ *
+ * Copyright (c) 2023 Keguang Zhang <keguang.zhang@gmail.com>
+ */
+
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/sizes.h>
+#include "timer-of.h"
+
+/* Loongson-1 PWM Timer Register Definitions */
+#define PWM_CNTR		0x0
+#define PWM_HRC			0x4
+#define PWM_LRC			0x8
+#define PWM_CTRL		0xc
+
+/* PWM Control Register Bits */
+#define INT_LRC_EN		BIT(11)
+#define INT_HRC_EN		BIT(10)
+#define CNTR_RST		BIT(7)
+#define INT_SR			BIT(6)
+#define INT_EN			BIT(5)
+#define PWM_SINGLE		BIT(4)
+#define PWM_OE			BIT(3)
+#define CNT_EN			BIT(0)
+
+#define CNTR_WIDTH		24
+
+DEFINE_RAW_SPINLOCK(ls1x_timer_lock);
+
+struct ls1x_clocksource {
+	void __iomem *reg_base;
+	unsigned long ticks_per_jiffy;
+	struct clocksource clksrc;
+};
+
+static inline struct ls1x_clocksource *to_ls1x_clksrc(struct clocksource *c)
+{
+	return container_of(c, struct ls1x_clocksource, clksrc);
+}
+
+static inline void ls1x_pwmtimer_set_period(unsigned int period,
+					    struct timer_of *to)
+{
+	writel(period, timer_of_base(to) + PWM_LRC);
+	writel(period, timer_of_base(to) + PWM_HRC);
+}
+
+static inline void ls1x_pwmtimer_clear(struct timer_of *to)
+{
+	writel(0, timer_of_base(to) + PWM_CNTR);
+}
+
+static inline void ls1x_pwmtimer_start(struct timer_of *to)
+{
+	writel((INT_EN | PWM_OE | CNT_EN), timer_of_base(to) + PWM_CTRL);
+}
+
+static inline void ls1x_pwmtimer_stop(struct timer_of *to)
+{
+	writel(0, timer_of_base(to) + PWM_CTRL);
+}
+
+static inline void ls1x_pwmtimer_irq_ack(struct timer_of *to)
+{
+	int val;
+
+	val = readl(timer_of_base(to) + PWM_CTRL);
+	val |= INT_SR;
+	writel(val, timer_of_base(to) + PWM_CTRL);
+}
+
+static irqreturn_t ls1x_clockevent_isr(int irq, void *dev_id)
+{
+	struct clock_event_device *clkevt = dev_id;
+	struct timer_of *to = to_timer_of(clkevt);
+
+	ls1x_pwmtimer_irq_ack(to);
+	ls1x_pwmtimer_clear(to);
+	ls1x_pwmtimer_start(to);
+
+	clkevt->event_handler(clkevt);
+
+	return IRQ_HANDLED;
+}
+
+static int ls1x_clockevent_set_state_periodic(struct clock_event_device *clkevt)
+{
+	struct timer_of *to = to_timer_of(clkevt);
+
+	raw_spin_lock(&ls1x_timer_lock);
+	ls1x_pwmtimer_set_period(timer_of_period(to), to);
+	ls1x_pwmtimer_clear(to);
+	ls1x_pwmtimer_start(to);
+	raw_spin_unlock(&ls1x_timer_lock);
+
+	return 0;
+}
+
+static int ls1x_clockevent_tick_resume(struct clock_event_device *clkevt)
+{
+	raw_spin_lock(&ls1x_timer_lock);
+	ls1x_pwmtimer_start(to_timer_of(clkevt));
+	raw_spin_unlock(&ls1x_timer_lock);
+
+	return 0;
+}
+
+static int ls1x_clockevent_set_state_shutdown(struct clock_event_device *clkevt)
+{
+	raw_spin_lock(&ls1x_timer_lock);
+	ls1x_pwmtimer_stop(to_timer_of(clkevt));
+	raw_spin_unlock(&ls1x_timer_lock);
+
+	return 0;
+}
+
+static int ls1x_clockevent_set_next(unsigned long evt,
+				    struct clock_event_device *clkevt)
+{
+	struct timer_of *to = to_timer_of(clkevt);
+
+	raw_spin_lock(&ls1x_timer_lock);
+	ls1x_pwmtimer_set_period(evt, to);
+	ls1x_pwmtimer_clear(to);
+	ls1x_pwmtimer_start(to);
+	raw_spin_unlock(&ls1x_timer_lock);
+
+	return 0;
+}
+
+static struct timer_of ls1x_to = {
+	.flags = TIMER_OF_IRQ | TIMER_OF_BASE | TIMER_OF_CLOCK,
+	.clkevt = {
+		.name			= "ls1x-pwmtimer",
+		.features		= CLOCK_EVT_FEAT_PERIODIC |
+					  CLOCK_EVT_FEAT_ONESHOT,
+		.rating			= 300,
+		.set_next_event		= ls1x_clockevent_set_next,
+		.set_state_periodic	= ls1x_clockevent_set_state_periodic,
+		.set_state_oneshot	= ls1x_clockevent_set_state_shutdown,
+		.set_state_shutdown	= ls1x_clockevent_set_state_shutdown,
+		.tick_resume		= ls1x_clockevent_tick_resume,
+	},
+	.of_irq = {
+		.handler		= ls1x_clockevent_isr,
+		.flags			= IRQF_TIMER,
+	},
+};
+
+/*
+ * Since the PWM timer overflows every two ticks, its not very useful
+ * to just read by itself. So use jiffies to emulate a free
+ * running counter:
+ */
+static u64 ls1x_clocksource_read(struct clocksource *cs)
+{
+	struct ls1x_clocksource *ls1x_cs = to_ls1x_clksrc(cs);
+	unsigned long flags;
+	int count;
+	u32 jifs;
+	static int old_count;
+	static u32 old_jifs;
+
+	raw_spin_lock_irqsave(&ls1x_timer_lock, flags);
+	/*
+	 * Although our caller may have the read side of xtime_lock,
+	 * this is now a seqlock, and we are cheating in this routine
+	 * by having side effects on state that we cannot undo if
+	 * there is a collision on the seqlock and our caller has to
+	 * retry.  (Namely, old_jifs and old_count.)  So we must treat
+	 * jiffies as volatile despite the lock.  We read jiffies
+	 * before latching the timer count to guarantee that although
+	 * the jiffies value might be older than the count (that is,
+	 * the counter may underflow between the last point where
+	 * jiffies was incremented and the point where we latch the
+	 * count), it cannot be newer.
+	 */
+	jifs = jiffies;
+	/* read the count */
+	count = readl(ls1x_cs->reg_base + PWM_CNTR);
+
+	/*
+	 * It's possible for count to appear to go the wrong way for this
+	 * reason:
+	 *
+	 *  The timer counter underflows, but we haven't handled the resulting
+	 *  interrupt and incremented jiffies yet.
+	 *
+	 * Previous attempts to handle these cases intelligently were buggy, so
+	 * we just do the simple thing now.
+	 */
+	if (count < old_count && jifs == old_jifs)
+		count = old_count;
+
+	old_count = count;
+	old_jifs = jifs;
+
+	raw_spin_unlock_irqrestore(&ls1x_timer_lock, flags);
+
+	return (u64)(jifs * ls1x_cs->ticks_per_jiffy) + count;
+}
+
+static struct ls1x_clocksource ls1x_clocksource = {
+	.clksrc = {
+		.name           = "ls1x-pwmtimer",
+		.rating		= 300,
+		.read           = ls1x_clocksource_read,
+		.mask           = CLOCKSOURCE_MASK(CNTR_WIDTH),
+		.flags          = CLOCK_SOURCE_IS_CONTINUOUS,
+	},
+};
+
+static int __init ls1x_pwm_clocksource_init(struct device_node *np)
+{
+	struct timer_of *to = &ls1x_to;
+	int ret;
+
+	ret = timer_of_init(np, to);
+	if (ret)
+		return ret;
+
+	clockevents_config_and_register(&to->clkevt, timer_of_rate(to),
+					0x1, GENMASK(CNTR_WIDTH - 1, 0));
+
+	ls1x_clocksource.reg_base = timer_of_base(to);
+	ls1x_clocksource.ticks_per_jiffy = timer_of_period(to);
+
+	return clocksource_register_hz(&ls1x_clocksource.clksrc,
+				       timer_of_rate(to));
+}
+
+TIMER_OF_DECLARE(ls1x_pwm_clocksource, "loongson,ls1b-pwmtimer",
+		 ls1x_pwm_clocksource_init);

include/linux/sched/signal.h

@@ -135,7 +135,7 @@ struct signal_struct {
 #ifdef CONFIG_POSIX_TIMERS
 
 	/* POSIX.1b Interval Timers */
-	int			posix_timer_id;
+	unsigned int		next_posix_timer_id;
 	struct list_head	posix_timers;
 
 	/* ITIMER_REAL timer for the process */

include/linux/syscalls.h

@@ -1280,6 +1280,7 @@ asmlinkage long sys_ni_syscall(void);
 
 #endif /* CONFIG_ARCH_HAS_SYSCALL_WRAPPER */
 
+asmlinkage long sys_ni_posix_timers(void);
 
 /*
  * Kernel code should not call syscalls (i.e., sys_xyzyyz()) directly.

include/linux/time_namespace.h

@@ -44,7 +44,6 @@ struct time_namespace *copy_time_ns(unsigned long flags,
 				    struct time_namespace *old_ns);
 void free_time_ns(struct time_namespace *ns);
 void timens_on_fork(struct nsproxy *nsproxy, struct task_struct *tsk);
-struct vdso_data *arch_get_vdso_data(void *vvar_page);
 struct page *find_timens_vvar_page(struct vm_area_struct *vma);
 
 static inline void put_time_ns(struct time_namespace *ns)
@@ -163,4 +162,6 @@ static inline ktime_t timens_ktime_to_host(clockid_t clockid, ktime_t tim)
 }
 #endif
 
+struct vdso_data *arch_get_vdso_data(void *vvar_page);
+
 #endif /* _LINUX_TIMENS_H */

include/soc/imx/timer.h

-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright 2015 Linaro Ltd.
- */
-
-#ifndef __SOC_IMX_TIMER_H__
-#define __SOC_IMX_TIMER_H__
-
-enum imx_gpt_type {
-	GPT_TYPE_IMX1,		/* i.MX1 */
-	GPT_TYPE_IMX21,		/* i.MX21/27 */
-	GPT_TYPE_IMX31,		/* i.MX31/35/25/37/51/6Q */
-	GPT_TYPE_IMX6DL,	/* i.MX6DL/SX/SL */
-};
-
-#endif  /* __SOC_IMX_TIMER_H__ */

include/trace/events/timer.h

@@ -158,7 +158,11 @@ DEFINE_EVENT(timer_class, timer_cancel,
 		{ HRTIMER_MODE_ABS_SOFT,	"ABS|SOFT"	},	\
 		{ HRTIMER_MODE_REL_SOFT,	"REL|SOFT"	},	\
 		{ HRTIMER_MODE_ABS_PINNED_SOFT,	"ABS|PINNED|SOFT" },	\
-		{ HRTIMER_MODE_REL_PINNED_SOFT,	"REL|PINNED|SOFT" })
+		{ HRTIMER_MODE_REL_PINNED_SOFT,	"REL|PINNED|SOFT" },	\
+		{ HRTIMER_MODE_ABS_HARD,	"ABS|HARD" },		\
+		{ HRTIMER_MODE_REL_HARD,	"REL|HARD" },		\
+		{ HRTIMER_MODE_ABS_PINNED_HARD, "ABS|PINNED|HARD" },	\
+		{ HRTIMER_MODE_REL_PINNED_HARD,	"REL|PINNED|HARD" })
 
 /**
  * hrtimer_init - called when the hrtimer is initialized

kernel/time/alarmtimer.c

@@ -751,7 +751,7 @@ static int alarm_timer_create(struct k_itimer *new_timer)
 static enum alarmtimer_restart alarmtimer_nsleep_wakeup(struct alarm *alarm,
 								ktime_t now)
 {
-	struct task_struct *task = (struct task_struct *)alarm->data;
+	struct task_struct *task = alarm->data;
 
 	alarm->data = NULL;
 	if (task)
@@ -847,7 +847,7 @@ static int alarm_timer_nsleep(const clockid_t which_clock, int flags,
 	struct restart_block *restart = &current->restart_block;
 	struct alarm alarm;
 	ktime_t exp;
-	int ret = 0;
+	int ret;
 
 	if (!alarmtimer_get_rtcdev())
 		return -EOPNOTSUPP;

kernel/time/hrtimer.c

@@ -164,6 +164,7 @@ static inline bool is_migration_base(struct hrtimer_clock_base *base)
 static
 struct hrtimer_clock_base *lock_hrtimer_base(const struct hrtimer *timer,
 					     unsigned long *flags)
+	__acquires(&timer->base->lock)
 {
 	struct hrtimer_clock_base *base;
 
@@ -280,6 +281,7 @@ static inline bool is_migration_base(struct hrtimer_clock_base *base)
 
 static inline struct hrtimer_clock_base *
 lock_hrtimer_base(const struct hrtimer *timer, unsigned long *flags)
+	__acquires(&timer->base->cpu_base->lock)
 {
 	struct hrtimer_clock_base *base = timer->base;
 
@@ -1013,6 +1015,7 @@ void hrtimers_resume_local(void)
  */
 static inline
 void unlock_hrtimer_base(const struct hrtimer *timer, unsigned long *flags)
+	__releases(&timer->base->cpu_base->lock)
 {
 	raw_spin_unlock_irqrestore(&timer->base->cpu_base->lock, *flags);
 }

kernel/time/tick-sched.c

@@ -1041,7 +1041,7 @@ static bool report_idle_softirq(void)
 			return false;
 	}
 
-	if (ratelimit < 10)
+	if (ratelimit >= 10)
 		return false;
 
 	/* On RT, softirqs handling may be waiting on some lock */