power: supply: mm8013: fix "not charging" detection

The charge_behaviours property is meant as a control-knob that can be
changed by the user.

Page 23 of [0] which documents the flag CHG_INH as follows:

  CHG_INH : Charge Inhibit      When the current is more than or equal to charge
                                threshold current,
                                charge inhibit temperature (upper/lower limit) ：1
                                charge permission temperature or the current is
                                less than charge threshold current ：0

So this is pure read-only information which is better represented as
POWER_SUPPLY_STATUS_NOT_CHARGING.

[0] https://product.minebeamitsumi.com/en/product/category/ics/battery/fuel_gauge/parts/download/__icsFiles/afieldfile/2023/07/12/1_download_01_12.pdfSigned-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20240303-power_supply-charge_behaviour_prop-v2-1-8ebb0a7c2409@weissschuh.net
Fixes: e39257cd ("power: supply: mm8013: Add more properties")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

drivers/power/supply/mm8013.c

@@ -71,7 +71,6 @@ static int mm8013_checkdevice(struct mm8013_chip *chip)
 
 static enum power_supply_property mm8013_battery_props[] = {
 	POWER_SUPPLY_PROP_CAPACITY,
-	POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR,
 	POWER_SUPPLY_PROP_CHARGE_FULL,
 	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
 	POWER_SUPPLY_PROP_CHARGE_NOW,
@@ -103,16 +102,6 @@ static int mm8013_get_property(struct power_supply *psy,
 
 		val->intval = regval;
 		break;
-	case POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR:
-		ret = regmap_read(chip->regmap, REG_FLAGS, &regval);
-		if (ret < 0)
-			return ret;
-
-		if (regval & MM8013_FLAG_CHG_INH)
-			val->intval = POWER_SUPPLY_CHARGE_BEHAVIOUR_INHIBIT_CHARGE;
-		else
-			val->intval = POWER_SUPPLY_CHARGE_BEHAVIOUR_AUTO;
-		break;
 	case POWER_SUPPLY_PROP_CHARGE_FULL:
 		ret = regmap_read(chip->regmap, REG_FULL_CHARGE_CAPACITY, &regval);
 		if (ret < 0)
@@ -187,6 +176,8 @@ static int mm8013_get_property(struct power_supply *psy,
 
 		if (regval & MM8013_FLAG_DSG)
 			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		else if (regval & MM8013_FLAG_CHG_INH)
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
 		else if (regval & MM8013_FLAG_CHG)
 			val->intval = POWER_SUPPLY_STATUS_CHARGING;
 		else if (regval & MM8013_FLAG_FC)