Commit cd9a0433 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'staging-4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and IIO driver fixes from Greg KH:
 "Here are some small IIO and staging driver fixes for 4.20-rc5.

  Nothing major, the IIO fix ended up touching the HID drivers at the
  same time, but the HID maintainer acked it. The staging fixes are all
  minor patches for reported issues and regressions, full details are in
  the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers
  staging: vchiq_arm: fix compat VCHIQ_IOC_AWAIT_COMPLETION
  staging: mt7621-pinctrl: fix uninitialized variable ngroups
  staging: rtl8723bs: Add missing return for cfg80211_rtw_get_station
  staging: most: use format specifier "%s" in snprintf
  staging: rtl8723bs: Fix incorrect sense of ether_addr_equal
  staging: mt7621-dma: fix potentially dereferencing uninitialized 'tx_desc'
  staging: comedi: clarify/unify macros for NI macro-defined terminals
  drivers: staging: cedrus: find ctx before dereferencing it ctx
  staging: rtl8723bs: Fix the return value in case of error in 'rtw_wx_read32()'
  staging: comedi: ni_mio_common: scale ao INSN_CONFIG_GET_CMD_TIMING_CONSTRAINTS
  iio:st_magn: Fix enable device after trigger
parents 40ebba2a c648284f
......@@ -358,7 +358,7 @@ static ssize_t show_value(struct device *dev, struct device_attribute *attr,
sensor_inst->hsdev,
sensor_inst->hsdev->usage,
usage, report_id,
SENSOR_HUB_SYNC);
SENSOR_HUB_SYNC, false);
} else if (!strncmp(name, "units", strlen("units")))
value = sensor_inst->fields[field_index].attribute.units;
else if (!strncmp(name, "unit-expo", strlen("unit-expo")))
......
......@@ -299,7 +299,8 @@ EXPORT_SYMBOL_GPL(sensor_hub_get_feature);
int sensor_hub_input_attr_get_raw_value(struct hid_sensor_hub_device *hsdev,
u32 usage_id,
u32 attr_usage_id, u32 report_id,
enum sensor_hub_read_flags flag)
enum sensor_hub_read_flags flag,
bool is_signed)
{
struct sensor_hub_data *data = hid_get_drvdata(hsdev->hdev);
unsigned long flags;
......@@ -331,10 +332,16 @@ int sensor_hub_input_attr_get_raw_value(struct hid_sensor_hub_device *hsdev,
&hsdev->pending.ready, HZ*5);
switch (hsdev->pending.raw_size) {
case 1:
ret_val = *(u8 *)hsdev->pending.raw_data;
if (is_signed)
ret_val = *(s8 *)hsdev->pending.raw_data;
else
ret_val = *(u8 *)hsdev->pending.raw_data;
break;
case 2:
ret_val = *(u16 *)hsdev->pending.raw_data;
if (is_signed)
ret_val = *(s16 *)hsdev->pending.raw_data;
else
ret_val = *(u16 *)hsdev->pending.raw_data;
break;
case 4:
ret_val = *(u32 *)hsdev->pending.raw_data;
......
......@@ -149,6 +149,7 @@ static int accel_3d_read_raw(struct iio_dev *indio_dev,
int report_id = -1;
u32 address;
int ret_type;
s32 min;
struct hid_sensor_hub_device *hsdev =
accel_state->common_attributes.hsdev;
......@@ -158,12 +159,14 @@ static int accel_3d_read_raw(struct iio_dev *indio_dev,
case IIO_CHAN_INFO_RAW:
hid_sensor_power_state(&accel_state->common_attributes, true);
report_id = accel_state->accel[chan->scan_index].report_id;
min = accel_state->accel[chan->scan_index].logical_minimum;
address = accel_3d_addresses[chan->scan_index];
if (report_id >= 0)
*val = sensor_hub_input_attr_get_raw_value(
accel_state->common_attributes.hsdev,
hsdev->usage, address, report_id,
SENSOR_HUB_SYNC);
SENSOR_HUB_SYNC,
min < 0);
else {
*val = 0;
hid_sensor_power_state(&accel_state->common_attributes,
......
......@@ -111,6 +111,7 @@ static int gyro_3d_read_raw(struct iio_dev *indio_dev,
int report_id = -1;
u32 address;
int ret_type;
s32 min;
*val = 0;
*val2 = 0;
......@@ -118,13 +119,15 @@ static int gyro_3d_read_raw(struct iio_dev *indio_dev,
case IIO_CHAN_INFO_RAW:
hid_sensor_power_state(&gyro_state->common_attributes, true);
report_id = gyro_state->gyro[chan->scan_index].report_id;
min = gyro_state->gyro[chan->scan_index].logical_minimum;
address = gyro_3d_addresses[chan->scan_index];
if (report_id >= 0)
*val = sensor_hub_input_attr_get_raw_value(
gyro_state->common_attributes.hsdev,
HID_USAGE_SENSOR_GYRO_3D, address,
report_id,
SENSOR_HUB_SYNC);
SENSOR_HUB_SYNC,
min < 0);
else {
*val = 0;
hid_sensor_power_state(&gyro_state->common_attributes,
......
......@@ -75,7 +75,8 @@ static int humidity_read_raw(struct iio_dev *indio_dev,
HID_USAGE_SENSOR_HUMIDITY,
HID_USAGE_SENSOR_ATMOSPHERIC_HUMIDITY,
humid_st->humidity_attr.report_id,
SENSOR_HUB_SYNC);
SENSOR_HUB_SYNC,
humid_st->humidity_attr.logical_minimum < 0);
hid_sensor_power_state(&humid_st->common_attributes, false);
return IIO_VAL_INT;
......
......@@ -93,6 +93,7 @@ static int als_read_raw(struct iio_dev *indio_dev,
int report_id = -1;
u32 address;
int ret_type;
s32 min;
*val = 0;
*val2 = 0;
......@@ -102,8 +103,8 @@ static int als_read_raw(struct iio_dev *indio_dev,
case CHANNEL_SCAN_INDEX_INTENSITY:
case CHANNEL_SCAN_INDEX_ILLUM:
report_id = als_state->als_illum.report_id;
address =
HID_USAGE_SENSOR_LIGHT_ILLUM;
min = als_state->als_illum.logical_minimum;
address = HID_USAGE_SENSOR_LIGHT_ILLUM;
break;
default:
report_id = -1;
......@@ -116,7 +117,8 @@ static int als_read_raw(struct iio_dev *indio_dev,
als_state->common_attributes.hsdev,
HID_USAGE_SENSOR_ALS, address,
report_id,
SENSOR_HUB_SYNC);
SENSOR_HUB_SYNC,
min < 0);
hid_sensor_power_state(&als_state->common_attributes,
false);
} else {
......
......@@ -73,6 +73,7 @@ static int prox_read_raw(struct iio_dev *indio_dev,
int report_id = -1;
u32 address;
int ret_type;
s32 min;
*val = 0;
*val2 = 0;
......@@ -81,8 +82,8 @@ static int prox_read_raw(struct iio_dev *indio_dev,
switch (chan->scan_index) {
case CHANNEL_SCAN_INDEX_PRESENCE:
report_id = prox_state->prox_attr.report_id;
address =
HID_USAGE_SENSOR_HUMAN_PRESENCE;
min = prox_state->prox_attr.logical_minimum;
address = HID_USAGE_SENSOR_HUMAN_PRESENCE;
break;
default:
report_id = -1;
......@@ -95,7 +96,8 @@ static int prox_read_raw(struct iio_dev *indio_dev,
prox_state->common_attributes.hsdev,
HID_USAGE_SENSOR_PROX, address,
report_id,
SENSOR_HUB_SYNC);
SENSOR_HUB_SYNC,
min < 0);
hid_sensor_power_state(&prox_state->common_attributes,
false);
} else {
......
......@@ -163,21 +163,23 @@ static int magn_3d_read_raw(struct iio_dev *indio_dev,
int report_id = -1;
u32 address;
int ret_type;
s32 min;
*val = 0;
*val2 = 0;
switch (mask) {
case IIO_CHAN_INFO_RAW:
hid_sensor_power_state(&magn_state->magn_flux_attributes, true);
report_id =
magn_state->magn[chan->address].report_id;
report_id = magn_state->magn[chan->address].report_id;
min = magn_state->magn[chan->address].logical_minimum;
address = magn_3d_addresses[chan->address];
if (report_id >= 0)
*val = sensor_hub_input_attr_get_raw_value(
magn_state->magn_flux_attributes.hsdev,
HID_USAGE_SENSOR_COMPASS_3D, address,
report_id,
SENSOR_HUB_SYNC);
SENSOR_HUB_SYNC,
min < 0);
else {
*val = 0;
hid_sensor_power_state(
......
......@@ -30,11 +30,6 @@ int st_magn_trig_set_state(struct iio_trigger *trig, bool state)
return st_sensors_set_dataready_irq(indio_dev, state);
}
static int st_magn_buffer_preenable(struct iio_dev *indio_dev)
{
return st_sensors_set_enable(indio_dev, true);
}
static int st_magn_buffer_postenable(struct iio_dev *indio_dev)
{
int err;
......@@ -50,7 +45,7 @@ static int st_magn_buffer_postenable(struct iio_dev *indio_dev)
if (err < 0)
goto st_magn_buffer_postenable_error;
return err;
return st_sensors_set_enable(indio_dev, true);
st_magn_buffer_postenable_error:
kfree(mdata->buffer_data);
......@@ -63,11 +58,11 @@ static int st_magn_buffer_predisable(struct iio_dev *indio_dev)
int err;
struct st_sensor_data *mdata = iio_priv(indio_dev);
err = iio_triggered_buffer_predisable(indio_dev);
err = st_sensors_set_enable(indio_dev, false);
if (err < 0)
goto st_magn_buffer_predisable_error;
err = st_sensors_set_enable(indio_dev, false);
err = iio_triggered_buffer_predisable(indio_dev);
st_magn_buffer_predisable_error:
kfree(mdata->buffer_data);
......@@ -75,7 +70,6 @@ static int st_magn_buffer_predisable(struct iio_dev *indio_dev)
}
static const struct iio_buffer_setup_ops st_magn_buffer_setup_ops = {
.preenable = &st_magn_buffer_preenable,
.postenable = &st_magn_buffer_postenable,
.predisable = &st_magn_buffer_predisable,
};
......
......@@ -111,21 +111,23 @@ static int incl_3d_read_raw(struct iio_dev *indio_dev,
int report_id = -1;
u32 address;
int ret_type;
s32 min;
*val = 0;
*val2 = 0;
switch (mask) {
case IIO_CHAN_INFO_RAW:
hid_sensor_power_state(&incl_state->common_attributes, true);
report_id =
incl_state->incl[chan->scan_index].report_id;
report_id = incl_state->incl[chan->scan_index].report_id;
min = incl_state->incl[chan->scan_index].logical_minimum;
address = incl_3d_addresses[chan->scan_index];
if (report_id >= 0)
*val = sensor_hub_input_attr_get_raw_value(
incl_state->common_attributes.hsdev,
HID_USAGE_SENSOR_INCLINOMETER_3D, address,
report_id,
SENSOR_HUB_SYNC);
SENSOR_HUB_SYNC,
min < 0);
else {
hid_sensor_power_state(&incl_state->common_attributes,
false);
......
......@@ -77,6 +77,7 @@ static int press_read_raw(struct iio_dev *indio_dev,
int report_id = -1;
u32 address;
int ret_type;
s32 min;
*val = 0;
*val2 = 0;
......@@ -85,8 +86,8 @@ static int press_read_raw(struct iio_dev *indio_dev,
switch (chan->scan_index) {
case CHANNEL_SCAN_INDEX_PRESSURE:
report_id = press_state->press_attr.report_id;
address =
HID_USAGE_SENSOR_ATMOSPHERIC_PRESSURE;
min = press_state->press_attr.logical_minimum;
address = HID_USAGE_SENSOR_ATMOSPHERIC_PRESSURE;
break;
default:
report_id = -1;
......@@ -99,7 +100,8 @@ static int press_read_raw(struct iio_dev *indio_dev,
press_state->common_attributes.hsdev,
HID_USAGE_SENSOR_PRESSURE, address,
report_id,
SENSOR_HUB_SYNC);
SENSOR_HUB_SYNC,
min < 0);
hid_sensor_power_state(&press_state->common_attributes,
false);
} else {
......
......@@ -76,7 +76,8 @@ static int temperature_read_raw(struct iio_dev *indio_dev,
HID_USAGE_SENSOR_TEMPERATURE,
HID_USAGE_SENSOR_DATA_ENVIRONMENTAL_TEMPERATURE,
temp_st->temperature_attr.report_id,
SENSOR_HUB_SYNC);
SENSOR_HUB_SYNC,
temp_st->temperature_attr.logical_minimum < 0);
hid_sensor_power_state(
&temp_st->common_attributes,
false);
......
......@@ -213,7 +213,7 @@ static int hid_rtc_read_time(struct device *dev, struct rtc_time *tm)
/* get a report with all values through requesting one value */
sensor_hub_input_attr_get_raw_value(time_state->common_attributes.hsdev,
HID_USAGE_SENSOR_TIME, hid_time_addresses[0],
time_state->info[0].report_id, SENSOR_HUB_SYNC);
time_state->info[0].report_id, SENSOR_HUB_SYNC, false);
/* wait for all values (event) */
ret = wait_for_completion_killable_timeout(
&time_state->comp_last_time, HZ*6);
......
......@@ -1005,35 +1005,38 @@ enum i8254_mode {
* and INSN_DEVICE_CONFIG_GET_ROUTES.
*/
#define NI_NAMES_BASE 0x8000u
#define _TERM_N(base, n, x) ((base) + ((x) & ((n) - 1)))
/*
* not necessarily all allowed 64 PFIs are valid--certainly not for all devices
*/
#define NI_PFI(x) (NI_NAMES_BASE + ((x) & 0x3f))
#define NI_PFI(x) _TERM_N(NI_NAMES_BASE, 64, x)
/* 8 trigger lines by standard, Some devices cannot talk to all eight. */
#define TRIGGER_LINE(x) (NI_PFI(-1) + 1 + ((x) & 0x7))
#define TRIGGER_LINE(x) _TERM_N(NI_PFI(-1) + 1, 8, x)
/* 4 RTSI shared MUXes to route signals to/from TRIGGER_LINES on NI hardware */
#define NI_RTSI_BRD(x) (TRIGGER_LINE(-1) + 1 + ((x) & 0x3))
#define NI_RTSI_BRD(x) _TERM_N(TRIGGER_LINE(-1) + 1, 4, x)
/* *** Counter/timer names : 8 counters max *** */
#define NI_COUNTER_NAMES_BASE (NI_RTSI_BRD(-1) + 1)
#define NI_MAX_COUNTERS 7
#define NI_CtrSource(x) (NI_COUNTER_NAMES_BASE + ((x) & NI_MAX_COUNTERS))
#define NI_MAX_COUNTERS 8
#define NI_COUNTER_NAMES_BASE (NI_RTSI_BRD(-1) + 1)
#define NI_CtrSource(x) _TERM_N(NI_COUNTER_NAMES_BASE, NI_MAX_COUNTERS, x)
/* Gate, Aux, A,B,Z are all treated, at times as gates */
#define NI_GATES_NAMES_BASE (NI_CtrSource(-1) + 1)
#define NI_CtrGate(x) (NI_GATES_NAMES_BASE + ((x) & NI_MAX_COUNTERS))
#define NI_CtrAux(x) (NI_CtrGate(-1) + 1 + ((x) & NI_MAX_COUNTERS))
#define NI_CtrA(x) (NI_CtrAux(-1) + 1 + ((x) & NI_MAX_COUNTERS))
#define NI_CtrB(x) (NI_CtrA(-1) + 1 + ((x) & NI_MAX_COUNTERS))
#define NI_CtrZ(x) (NI_CtrB(-1) + 1 + ((x) & NI_MAX_COUNTERS))
#define NI_GATES_NAMES_MAX NI_CtrZ(-1)
#define NI_CtrArmStartTrigger(x) (NI_CtrZ(-1) + 1 + ((x) & NI_MAX_COUNTERS))
#define NI_GATES_NAMES_BASE (NI_CtrSource(-1) + 1)
#define NI_CtrGate(x) _TERM_N(NI_GATES_NAMES_BASE, NI_MAX_COUNTERS, x)
#define NI_CtrAux(x) _TERM_N(NI_CtrGate(-1) + 1, NI_MAX_COUNTERS, x)
#define NI_CtrA(x) _TERM_N(NI_CtrAux(-1) + 1, NI_MAX_COUNTERS, x)
#define NI_CtrB(x) _TERM_N(NI_CtrA(-1) + 1, NI_MAX_COUNTERS, x)
#define NI_CtrZ(x) _TERM_N(NI_CtrB(-1) + 1, NI_MAX_COUNTERS, x)
#define NI_GATES_NAMES_MAX NI_CtrZ(-1)
#define NI_CtrArmStartTrigger(x) _TERM_N(NI_CtrZ(-1) + 1, NI_MAX_COUNTERS, x)
#define NI_CtrInternalOutput(x) \
(NI_CtrArmStartTrigger(-1) + 1 + ((x) & NI_MAX_COUNTERS))
_TERM_N(NI_CtrArmStartTrigger(-1) + 1, NI_MAX_COUNTERS, x)
/** external pin(s) labeled conveniently as Ctr<i>Out. */
#define NI_CtrOut(x) (NI_CtrInternalOutput(-1) + 1 + ((x) & NI_MAX_COUNTERS))
#define NI_CtrOut(x) _TERM_N(NI_CtrInternalOutput(-1) + 1, NI_MAX_COUNTERS, x)
/** For Buffered sampling of ctr -- x series capability. */
#define NI_CtrSampleClock(x) (NI_CtrOut(-1) + 1 + ((x) & NI_MAX_COUNTERS))
#define NI_COUNTER_NAMES_MAX NI_CtrSampleClock(-1)
#define NI_CtrSampleClock(x) _TERM_N(NI_CtrOut(-1) + 1, NI_MAX_COUNTERS, x)
#define NI_COUNTER_NAMES_MAX NI_CtrSampleClock(-1)
enum ni_common_signal_names {
/* PXI_Star: this is a non-NI-specific signal */
......
......@@ -2843,7 +2843,8 @@ static int ni_ao_insn_config(struct comedi_device *dev,
return ni_ao_arm(dev, s);
case INSN_CONFIG_GET_CMD_TIMING_CONSTRAINTS:
/* we don't care about actual channels */
data[1] = board->ao_speed;
/* data[3] : chanlist_len */
data[1] = board->ao_speed * data[3];
data[2] = 0;
return 0;
default:
......
......@@ -108,17 +108,6 @@ static int cedrus_request_validate(struct media_request *req)
unsigned int count;
unsigned int i;
count = vb2_request_buffer_cnt(req);
if (!count) {
v4l2_info(&ctx->dev->v4l2_dev,
"No buffer was provided with the request\n");
return -ENOENT;
} else if (count > 1) {
v4l2_info(&ctx->dev->v4l2_dev,
"More than one buffer was provided with the request\n");
return -EINVAL;
}
list_for_each_entry(obj, &req->objects, list) {
struct vb2_buffer *vb;
......@@ -133,6 +122,17 @@ static int cedrus_request_validate(struct media_request *req)
if (!ctx)
return -ENOENT;
count = vb2_request_buffer_cnt(req);
if (!count) {
v4l2_info(&ctx->dev->v4l2_dev,
"No buffer was provided with the request\n");
return -ENOENT;
} else if (count > 1) {
v4l2_info(&ctx->dev->v4l2_dev,
"More than one buffer was provided with the request\n");
return -EINVAL;
}
parent_hdl = &ctx->hdl;
hdl = v4l2_ctrl_request_hdl_find(req, parent_hdl);
......
......@@ -351,7 +351,7 @@ static ssize_t set_datatype_show(struct device *dev,
for (i = 0; i < ARRAY_SIZE(ch_data_type); i++) {
if (c->cfg.data_type & ch_data_type[i].most_ch_data_type)
return snprintf(buf, PAGE_SIZE, ch_data_type[i].name);
return snprintf(buf, PAGE_SIZE, "%s", ch_data_type[i].name);
}
return snprintf(buf, PAGE_SIZE, "unconfigured\n");
}
......
......@@ -335,6 +335,8 @@ static int mtk_hsdma_start_transfer(struct mtk_hsdam_engine *hsdma,
/* tx desc */
src = sg->src_addr;
for (i = 0; i < chan->desc->num_sgs; i++) {
tx_desc = &chan->tx_ring[chan->tx_idx];
if (len > HSDMA_MAX_PLEN)
tlen = HSDMA_MAX_PLEN;
else
......@@ -344,7 +346,6 @@ static int mtk_hsdma_start_transfer(struct mtk_hsdam_engine *hsdma,
tx_desc->addr1 = src;
tx_desc->flags |= HSDMA_DESC_PLEN1(tlen);
} else {
tx_desc = &chan->tx_ring[chan->tx_idx];
tx_desc->addr0 = src;
tx_desc->flags = HSDMA_DESC_PLEN0(tlen);
......
......@@ -82,7 +82,7 @@ static int rt2880_pinctrl_dt_node_to_map(struct pinctrl_dev *pctrldev,
struct property *prop;
const char *function_name, *group_name;
int ret;
int ngroups;
int ngroups = 0;
unsigned int reserved_maps = 0;
for_each_node_with_property(np_config, "group")
......
......@@ -109,12 +109,12 @@ static void update_recvframe_phyinfo(union recv_frame *precvframe,
rx_bssid = get_hdr_bssid(wlanhdr);
pkt_info.bssid_match = ((!IsFrameTypeCtrl(wlanhdr)) &&
!pattrib->icv_err && !pattrib->crc_err &&
!ether_addr_equal(rx_bssid, my_bssid));
ether_addr_equal(rx_bssid, my_bssid));
rx_ra = get_ra(wlanhdr);
my_hwaddr = myid(&padapter->eeprompriv);
pkt_info.to_self = pkt_info.bssid_match &&
!ether_addr_equal(rx_ra, my_hwaddr);
ether_addr_equal(rx_ra, my_hwaddr);
pkt_info.is_beacon = pkt_info.bssid_match &&
......
......@@ -1277,7 +1277,7 @@ static int cfg80211_rtw_get_station(struct wiphy *wiphy,
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_PACKETS);
sinfo->tx_packets = psta->sta_stats.tx_pkts;
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_FAILED);
}
/* for Ad-Hoc/AP mode */
......
......@@ -2289,7 +2289,7 @@ static int rtw_wx_read32(struct net_device *dev,
exit:
kfree(ptmp);
return 0;
return ret;
}
static int rtw_wx_write32(struct net_device *dev,
......
......@@ -1795,6 +1795,7 @@ vchiq_compat_ioctl_await_completion(struct file *file,
struct vchiq_await_completion32 args32;
struct vchiq_completion_data32 completion32;
unsigned int *msgbufcount32;
unsigned int msgbufcount_native;
compat_uptr_t msgbuf32;
void *msgbuf;
void **msgbufptr;
......@@ -1906,7 +1907,11 @@ vchiq_compat_ioctl_await_completion(struct file *file,
sizeof(completion32)))
return -EFAULT;
args32.msgbufcount--;
if (get_user(msgbufcount_native, &args->msgbufcount))
return -EFAULT;
if (!msgbufcount_native)
args32.msgbufcount--;
msgbufcount32 =
&((struct vchiq_await_completion32 __user *)arg)->msgbufcount;
......
......@@ -177,6 +177,7 @@ int sensor_hub_input_get_attribute_info(struct hid_sensor_hub_device *hsdev,
* @attr_usage_id: Attribute usage id as per spec
* @report_id: Report id to look for
* @flag: Synchronous or asynchronous read
* @is_signed: If true then fields < 32 bits will be sign-extended
*
* Issues a synchronous or asynchronous read request for an input attribute.
* Returns data upto 32 bits.
......@@ -190,7 +191,8 @@ enum sensor_hub_read_flags {
int sensor_hub_input_attr_get_raw_value(struct hid_sensor_hub_device *hsdev,
u32 usage_id,
u32 attr_usage_id, u32 report_id,
enum sensor_hub_read_flags flag
enum sensor_hub_read_flags flag,
bool is_signed
);
/**
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment