Commit cd9f59ca authored by Lee Jones's avatar Lee Jones Committed by Maxime Coquelin

ARM: STi: STiH407: Move PWM nodes STiH407 => STiH407-family

This also incorporates the STiH410.
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
Signed-off-by: default avatarMaxime Coquelin <maxime.coquelin@st.com>
parent 5eb26c60
...@@ -543,6 +543,7 @@ sata1: sata@9b28000 { ...@@ -543,6 +543,7 @@ sata1: sata@9b28000 {
status = "disabled"; status = "disabled";
}; };
st_dwc3: dwc3@8f94000 { st_dwc3: dwc3@8f94000 {
compatible = "st,stih407-dwc3"; compatible = "st,stih407-dwc3";
reg = <0x08f94000 0x1000>, <0x110 0x4>; reg = <0x08f94000 0x1000>, <0x110 0x4>;
...@@ -569,5 +570,34 @@ dwc3: dwc3@9900000 { ...@@ -569,5 +570,34 @@ dwc3: dwc3@9900000 {
<&phy_port2 PHY_TYPE_USB3>; <&phy_port2 PHY_TYPE_USB3>;
}; };
}; };
/* COMMS PWM Module */
pwm0: pwm@9810000 {
compatible = "st,sti-pwm";
status = "okay";
#pwm-cells = <2>;
reg = <0x9810000 0x68>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm0_chan0_default>;
clock-names = "pwm";
clocks = <&clk_sysin>;
st,pwm-num-chan = <1>;
};
/* SBC PWM Module */
pwm1: pwm@9510000 {
compatible = "st,sti-pwm";
status = "okay";
#pwm-cells = <2>;
reg = <0x9510000 0x68>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1_chan0_default
&pinctrl_pwm1_chan1_default
&pinctrl_pwm1_chan2_default
&pinctrl_pwm1_chan3_default>;
clock-names = "pwm";
clocks = <&clk_sysin>;
st,pwm-num-chan = <4>;
};
}; };
}; };
...@@ -147,33 +147,5 @@ sti-hda@8d02000 { ...@@ -147,33 +147,5 @@ sti-hda@8d02000 {
}; };
}; };
}; };
/* COMMS PWM Module */
pwm0: pwm@9810000 {
compatible = "st,sti-pwm";
status = "disabled";
#pwm-cells = <2>;
reg = <0x9810000 0x68>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm0_chan0_default>;
clock-names = "pwm";
clocks = <&clk_sysin>;
};
/* SBC PWM Module */
pwm1: pwm@9510000 {
compatible = "st,sti-pwm";
status = "disabled";
#pwm-cells = <2>;
reg = <0x9510000 0x68>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1_chan0_default
&pinctrl_pwm1_chan1_default
&pinctrl_pwm1_chan2_default
&pinctrl_pwm1_chan3_default>;
clock-names = "pwm";
clocks = <&clk_sysin>;
st,pwm-num-chan = <4>;
};
}; };
}; };
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment