Merge tag 'devicetree-for-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree changes from Rob Herring:

 - DT unittests for I2C probing and overlays from Pantelis Antoniou

 - Remove DT unittest dependency on OF_DYNAMIC from Gaurav Minocha

 - Add Tegra compatible strings missing for newer parts from Paul
   Walmsley

 - Various vendor prefix additions

* tag 'devicetree-for-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of: Add vendor prefix for OmniVision Technologies
  of: Use ovti for Omnivision
  of: Add vendor prefix for Truly Semiconductors Limited
  of: Add vendor prefix for Himax Technologies Inc.
  of/fdt: fix sparse warning
  of: unitest: Add I2C overlay unit tests.
  Documentation: DT: document compatible string existence requirement
  Documentation: DT bindings: add nvidia, tegra132-denver compatible string
  Documentation: DT bindings: add more Tegra chip compatible strings
  of: EXPORT_SYMBOL_GPL of_property_read_u64_array
  of: Fix brace position for struct of_device_id definition
  of/unittest: Remove obsolete code
  dt-bindings: use isil prefix for Intersil in vendor-prefixes.txt
  Add AD Holdings Plc. to vendor-prefixes.
  dt-bindings: Add Silicon Mitus vendor prefix
  Removes OF_UNITTEST dependency on OF_DYNAMIC config symbol
  pinctrl: fix up device tree bindings
  DT: Vendors: Add Everspin
  doc: add bindings document for altera fpga manager
  drivers: of: Export of_reserved_mem_device_{init,release}

Documentation/devicetree/bindings/arm/cpus.txt

@@ -175,6 +175,7 @@ nodes to be present and contain the properties described below.
 			    "marvell,pj4a"
 			    "marvell,pj4b"
 			    "marvell,sheeva-v5"
+			    "nvidia,tegra132-denver"
 			    "qcom,krait"
 			    "qcom,scorpion"
 	- enable-method

Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt

 NVIDIA Tegra AHB
 
 Required properties:
-- compatible : "nvidia,tegra20-ahb" or "nvidia,tegra30-ahb"
+- compatible : For Tegra20, must contain "nvidia,tegra20-ahb".  For
+  Tegra30, must contain "nvidia,tegra30-ahb".  Otherwise, must contain
+  '"nvidia,<chip>-ahb", "nvidia,tegra30-ahb"' where <chip> is tegra124,
+  tegra132, or tegra210.
 - reg : Should contain 1 register ranges(address and length)
 
 Example:

Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt

@@ -6,7 +6,11 @@ modes. It provides power-gating controllers for SoC and CPU power-islands.
 
 Required properties:
 - name : Should be pmc
-- compatible : Should contain "nvidia,tegra<chip>-pmc".
+- compatible : For Tegra20, must contain "nvidia,tegra20-pmc".  For Tegra30,
+  must contain "nvidia,tegra30-pmc".  For Tegra114, must contain
+  "nvidia,tegra114-pmc".  For Tegra124, must contain "nvidia,tegra124-pmc".
+  Otherwise, must contain "nvidia,<chip>-pmc", plus at least one of the
+  above, where <chip> is tegra132.
 - reg : Offset and length of the register set for the device
 - clocks : Must contain an entry for each entry in clock-names.
   See ../clocks/clock-bindings.txt for details.

Documentation/devicetree/bindings/ata/tegra-sata.txt

 Tegra124 SoC SATA AHCI controller
 
 Required properties :
-- compatible : "nvidia,tegra124-ahci".
+- compatible : For Tegra124, must contain "nvidia,tegra124-ahci".  Otherwise,
+  must contain '"nvidia,<chip>-ahci", "nvidia,tegra124-ahci"', where <chip>
+  is tegra132.
 - reg : Should contain 2 entries:
   - AHCI register set (SATA BAR5)
   - SATA register set

Documentation/devicetree/bindings/fpga/altera-socfpga-fpga-mgr.txt

+Altera SOCFPGA FPGA Manager
+
+Required properties:
+- compatible : should contain "altr,socfpga-fpga-mgr"
+- reg        : base address and size for memory mapped io.
+               - The first index is for FPGA manager register access.
+               - The second index is for writing FPGA configuration data.
+- interrupts : interrupt for the FPGA Manager device.
+
+Example:
+
+	hps_0_fpgamgr: fpgamgr@0xff706000 {
+		compatible = "altr,socfpga-fpga-mgr";
+		reg = <0xFF706000 0x1000
+		       0xFFB90000 0x1000>;
+		interrupts = <0 175 4>;
+	};

Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt

 NVIDIA Tegra20/Tegra30/Tegr114/Tegra124 fuse block.
 
 Required properties:
-- compatible : should be:
-	"nvidia,tegra20-efuse"
-	"nvidia,tegra30-efuse"
-	"nvidia,tegra114-efuse"
-	"nvidia,tegra124-efuse"
+- compatible : For Tegra20, must contain "nvidia,tegra20-efuse".  For Tegra30,
+  must contain "nvidia,tegra30-efuse".  For Tegra114, must contain
+  "nvidia,tegra114-efuse".  For Tegra124, must contain "nvidia,tegra124-efuse".
+  Otherwise, must contain "nvidia,<chip>-efuse", plus one of the above, where
+  <chip> is tegra132.
   Details:
   nvidia,tegra20-efuse: Tegra20 requires using APB DMA to read the fuse data
 	due to a hardware bug. Tegra20 also lacks certain information which is

Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt

@@ -197,7 +197,9 @@ of the following host1x client modules:
 - sor: serial output resource
 
   Required properties:
-  - compatible: "nvidia,tegra124-sor"
+  - compatible: For Tegra124, must contain "nvidia,tegra124-sor".  Otherwise,
+    must contain '"nvidia,<chip>-sor", "nvidia,tegra124-sor"', where <chip>
+    is tegra132.
   - reg: Physical base address and length of the controller's registers.
   - interrupts: The interrupt outputs from the controller.
   - clocks: Must contain an entry for each entry in clock-names.
@@ -222,7 +224,9 @@ of the following host1x client modules:
   - nvidia,dpaux: phandle to a DispayPort AUX interface
 
 - dpaux: DisplayPort AUX interface
-  - compatible: "nvidia,tegra124-dpaux"
+  - compatible: For Tegra124, must contain "nvidia,tegra124-dpaux".  Otherwise,
+    must contain '"nvidia,<chip>-dpaux", "nvidia,tegra124-dpaux"', where
+    <chip> is tegra132.
   - reg: Physical base address and length of the controller's registers.
   - interrupts: The interrupt outputs from the controller.
   - clocks: Must contain an entry for each entry in clock-names.

Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt

 NVIDIA Tegra20/Tegra30/Tegra114 I2C controller driver.
 
 Required properties:
-- compatible : should be:
-	"nvidia,tegra114-i2c"
-	"nvidia,tegra30-i2c"
-	"nvidia,tegra20-i2c"
-	"nvidia,tegra20-i2c-dvc"
+- compatible : For Tegra20, must be one of "nvidia,tegra20-i2c-dvc" or
+  "nvidia,tegra20-i2c".  For Tegra30, must be "nvidia,tegra30-i2c".
+  For Tegra114, must be "nvidia,tegra114-i2c".  Otherwise, must be
+  "nvidia,<chip>-i2c", plus at least one of the above, where <chip> is
+  tegra124, tegra132, or tegra210.
   Details of compatible are as follows:
   nvidia,tegra20-i2c-dvc: Tegra20 has specific I2C controller called as DVC I2C
 	controller. This only support master mode of I2C communication. Register

Documentation/devicetree/bindings/media/atmel-isi.txt

@@ -38,7 +38,7 @@ Example:
 
 	i2c1: i2c@f0018000 {
 		ov2640: camera@0x30 {
-			compatible = "omnivision,ov2640";
+			compatible = "ovti,ov2640";
 			reg = <0x30>;
 
 			port {

Documentation/devicetree/bindings/media/video-interfaces.txt

@@ -162,7 +162,7 @@ pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0.
 	i2c0: i2c@0xfff20000 {
 		...
 		ov772x_1: camera@0x21 {
-			compatible = "omnivision,ov772x";
+			compatible = "ovti,ov772x";
 			reg = <0x21>;
 			vddio-supply = <&regulator1>;
 			vddcore-supply = <&regulator2>;

Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt

 NVIDIA Tegra20/Tegra30/Tegr114/Tegra124 apbmisc block
 
 Required properties:
-- compatible : should be:
-       "nvidia,tegra20-apbmisc"
-       "nvidia,tegra30-apbmisc"
-       "nvidia,tegra114-apbmisc"
-       "nvidia,tegra124-apbmisc"
+- compatible : For Tegra20, must be "nvidia,tegra20-apbmisc".  For Tegra30,
+  must be "nvidia,tegra30-apbmisc".  Otherwise, must contain
+  "nvidia,<chip>-apbmisc", plus one of the above, where <chip> is tegra114,
+  tegra124, tegra132.
 - reg: Should contain 2 entries: the first entry gives the physical address
        and length of the registers which contain revision and debug features.
        The second entry gives the physical address and length of the

Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt

@@ -7,7 +7,11 @@ This file documents differences between the core properties described
 by mmc.txt and the properties used by the sdhci-tegra driver.
 
 Required properties:
-- compatible : Should be "nvidia,<chip>-sdhci"
+- compatible : For Tegra20, must contain "nvidia,tegra20-sdhci".
+  For Tegra30, must contain "nvidia,tegra30-sdhci".  For Tegra114,
+  must contain "nvidia,tegra114-sdhci".  For Tegra124, must contain
+  "nvidia,tegra124-sdhci".  Otherwise, must contain "nvidia,<chip>-sdhci",
+  plus one of the above, where <chip> is tegra132 or tegra210.
 - clocks : Must contain one entry, for the module clock.
   See ../clocks/clock-bindings.txt for details.
 - resets : Must contain an entry for each entry in reset-names.

Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt

 NVIDIA Tegra PCIe controller
 
 Required properties:
-- compatible: Must be one of:
-  - "nvidia,tegra20-pcie"
-  - "nvidia,tegra30-pcie"
-  - "nvidia,tegra124-pcie"
+- compatible: For Tegra20, must contain "nvidia,tegra20-pcie".  For Tegra30,
+  "nvidia,tegra30-pcie".  For Tegra124, must contain "nvidia,tegra124-pcie".
+  Otherwise, must contain "nvidia,<chip>-pcie", plus one of the above, where
+  <chip> is tegra132 or tegra210.
 - device_type: Must be "pci"
 - reg: A list of physical base address and length for each set of controller
   registers. Must contain an entry for each entry in the reg-names property.

Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.txt

@@ -6,7 +6,8 @@ nvidia,tegra30-pinmux.txt. In fact, this document assumes that binding as
 a baseline, and only documents the differences between the two bindings.
 
 Required properties:
-- compatible: "nvidia,tegra124-pinmux"
+- compatible: For Tegra124, must contain "nvidia,tegra124-pinmux".  For
+  Tegra132, must contain '"nvidia,tegra132-pinmux", "nvidia-tegra124-pinmux"'.
 - reg: Should contain a list of base address and size pairs for:
     -- first entry - the drive strength and pad control registers.
     -- second entry - the pinmux registers

Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt

@@ -13,7 +13,9 @@ how to describe and reference PHYs in device trees.
 
 Required properties:
 --------------------
-- compatible: should be "nvidia,tegra124-xusb-padctl"
+- compatible: For Tegra124, must contain "nvidia,tegra124-xusb-padctl".
+  Otherwise, must contain '"nvidia,<chip>-xusb-padctl",
+  "nvidia-tegra124-xusb-padctl"', where <chip> is tegra132 or tegra210.
 - reg: Physical base address and length of the controller's registers.
 - resets: Must contain an entry for each entry in reset-names.
   See ../reset/reset.txt for details.

Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt

 Tegra SoC PWFM controller
 
 Required properties:
-- compatible: should be one of:
-  - "nvidia,tegra20-pwm"
-  - "nvidia,tegra30-pwm"
+- compatible: For Tegra20, must contain "nvidia,tegra20-pwm".  For Tegra30,
+  must contain "nvidia,tegra30-pwm".  Otherwise, must contain
+  "nvidia,<chip>-pwm", plus one of the above, where <chip> is tegra114,
+  tegra124, tegra132, or tegra210.
 - reg: physical base address and length of the controller's registers
 - #pwm-cells: should be 2. See pwm.txt in this directory for a description of
   the cells format.

Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt

@@ -6,7 +6,9 @@ state.
 
 Required properties:
 
-- compatible : should be "nvidia,tegra20-rtc".
+- compatible : For Tegra20, must contain "nvidia,tegra20-rtc".  Otherwise,
+  must contain '"nvidia,<chip>-rtc", "nvidia,tegra20-rtc"', where <chip>
+  can be tegra30, tegra114, tegra124, or tegra132.
 - reg : Specifies base physical address and size of the registers.
 - interrupts : A single interrupt specifier.
 - clocks : Must contain one entry, for the module clock.

Documentation/devicetree/bindings/serial/of-serial.txt

@@ -8,7 +8,10 @@ Required properties:
 	- "ns16550"
 	- "ns16750"
 	- "ns16850"
-	- "nvidia,tegra20-uart"
+	- For Tegra20, must contain "nvidia,tegra20-uart"
+	- For other Tegra, must contain '"nvidia,<chip>-uart",
+	  "nvidia,tegra20-uart"' where <chip> is tegra30, tegra114, tegra124,
+	  tegra132, or tegra210.
 	- "nxp,lpc3220-uart"
 	- "ralink,rt2880-uart"
 	- "ibm,qpace-nwp-serial"

Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt

 NVIDIA Tegra30 AHUB (Audio Hub)
 
 Required properties:
-- compatible : "nvidia,tegra30-ahub", "nvidia,tegra114-ahub", etc.
+- compatible : For Tegra30, must contain "nvidia,tegra30-ahub".  For Tegra114,
+  must contain "nvidia,tegra114-ahub".  For Tegra124, must contain
+  "nvidia,tegra124-ahub".  Otherwise, must contain "nvidia,<chip>-ahub",
+  plus at least one of the above, where <chip> is tegra132.
 - reg : Should contain the register physical address and length for each of
   the AHUB's register blocks.
   - Tegra30 requires 2 entries, for the APBIF and AHUB/AUDIO register blocks.

Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt

 NVIDIA Tegra30 HDA controller
 
 Required properties:
-- compatible : "nvidia,tegra30-hda"
+- compatible : For Tegra30, must contain "nvidia,tegra30-hda".  Otherwise,
+  must contain '"nvidia,<chip>-hda", "nvidia,tegra30-hda"', where <chip> is
+  tegra114, tegra124, or tegra132.
 - reg : Should contain the HDA registers location and length.
 - interrupts : The interrupt from the HDA controller.
 - clocks : Must contain an entry for each required entry in clock-names.

Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt

 NVIDIA Tegra30 I2S controller
 
 Required properties:
-- compatible : "nvidia,tegra30-i2s"
+- compatible : For Tegra30, must contain "nvidia,tegra30-i2s".  For Tegra124,
+  must contain "nvidia,tegra124-i2s".  Otherwise, must contain
+  "nvidia,<chip>-i2s" plus at least one of the above, where <chip> is
+  tegra114 or tegra132.
 - reg : Should contain I2S registers location and length
 - clocks : Must contain one entry, for the module clock.
   See ../clocks/clock-bindings.txt for details.

Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt

 NVIDIA Tegra114 SPI controller.
 
 Required properties:
-- compatible : should be "nvidia,tegra114-spi".
+- compatible : For Tegra114, must contain "nvidia,tegra114-spi".
+  Otherwise, must contain '"nvidia,<chip>-spi", "nvidia,tegra114-spi"' where
+  <chip> is tegra124, tegra132, or tegra210.
 - reg: Should contain SPI registers location and length.
 - interrupts: Should contain SPI interrupts.
 - clock-names : Must include the following entries:

Documentation/devicetree/bindings/submitting-patches.txt

@@ -15,6 +15,29 @@ I. For patch submitters
   3) The Documentation/ portion of the patch should come in the series before
      the code implementing the binding.
 
+  4) Any compatible strings used in a chip or board DTS file must be
+     previously documented in the corresponding DT binding text file
+     in Documentation/devicetree/bindings.  This rule applies even if
+     the Linux device driver does not yet match on the compatible
+     string.  [ checkpatch will emit warnings if this step is not
+     followed as of commit bff5da4335256513497cc8c79f9a9d1665e09864
+     ("checkpatch: add DT compatible string documentation checks"). ]
+
+  5) The wildcard "<chip>" may be used in compatible strings, as in
+     the following example:
+
+         - compatible: Must contain '"nvidia,<chip>-pcie",
+           "nvidia,tegra20-pcie"' where <chip> is tegra30, tegra132, ...
+
+     As in the above example, the known values of "<chip>" should be
+     documented if it is used.
+
+  6) If a documented compatible string is not yet matched by the
+     driver, the documentation should also include a compatible
+     string that is matched by the driver (as in the "nvidia,tegra20-pcie"
+     example above).
+
+
 II. For kernel maintainers
 
   1) If you aren't comfortable reviewing a given binding, reply to it and ask

Documentation/devicetree/bindings/thermal/tegra-soctherm.txt

@@ -7,7 +7,9 @@ notifications. It is also used to manage emergency shutdown in an
 overheating situation.
 
 Required properties :
-- compatible : "nvidia,tegra124-soctherm".
+- compatible : For Tegra124, must contain "nvidia,tegra124-soctherm".
+  For Tegra132, must contain "nvidia,tegra132-soctherm".
+  For Tegra210, must contain "nvidia,tegra210-soctherm".
 - reg : Should contain 1 entry:
   - SOCTHERM register set
 - interrupts : Defines the interrupt used by SOCTHERM

Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt

@@ -6,7 +6,9 @@ trigger a legacy watchdog reset.
 
 Required properties:
 
-- compatible : should be "nvidia,tegra30-timer", "nvidia,tegra20-timer".
+- compatible : For Tegra30, must contain "nvidia,tegra30-timer".  Otherwise,
+  must contain '"nvidia,<chip>-timer", "nvidia,tegra30-timer"' where
+  <chip> is tegra124 or tegra132.
 - reg : Specifies base physical address and size of the registers.
 - interrupts : A list of 6 interrupts; one per each of timer channels 1
     through 5, and one for the shared interrupt for the remaining channels.

Documentation/devicetree/bindings/unittest.txt

-* OF selftest platform device
+1) OF selftest platform device
 
 ** selftest
 
@@ -12,3 +12,60 @@ Example:
 		compatible = "selftest";
 		status = "okay";
 	};
+
+2) OF selftest i2c adapter platform device
+
+** platform device unittest adapter
+
+Required properties:
+- compatible: must be selftest-i2c-bus
+
+Children nodes contain selftest i2c devices.
+
+Example:
+	selftest-i2c-bus {
+		compatible = "selftest-i2c-bus";
+		status = "okay";
+	};
+
+3) OF selftest i2c device
+
+** I2C selftest device
+
+Required properties:
+- compatible: must be selftest-i2c-dev
+
+All other properties are optional
+
+Example:
+	selftest-i2c-dev {
+		compatible = "selftest-i2c-dev";
+		status = "okay";
+	};
+
+4) OF selftest i2c mux device
+
+** I2C selftest mux
+
+Required properties:
+- compatible: must be selftest-i2c-mux
+
+Children nodes contain selftest i2c bus nodes per channel.
+
+Example:
+	selftest-i2c-mux {
+		compatible = "selftest-i2c-mux";
+		status = "okay";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		channel-0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			i2c-dev {
+				reg = <8>;
+				compatible = "selftest-i2c-dev";
+				status = "okay";
+			};
+		};
+	};

Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt

@@ -6,7 +6,10 @@ Practice : Universal Serial Bus" with the following modifications
 and additions :
 
 Required properties :
- - compatible : Should be "nvidia,tegra20-ehci".
+ - compatible : For Tegra20, must contain "nvidia,tegra20-ehci".
+   For Tegra30, must contain "nvidia,tegra30-ehci".  Otherwise, must contain
+   "nvidia,<chip>-ehci" plus at least one of the above, where <chip> is
+   tegra114, tegra124, tegra132, or tegra210.
  - nvidia,phy : phandle of the PHY that the controller is connected to.
  - clocks : Must contain one entry, for the module clock.
    See ../clocks/clock-bindings.txt for details.

Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt

@@ -3,7 +3,10 @@ Tegra SOC USB PHY
 The device node for Tegra SOC USB PHY:
 
 Required properties :
- - compatible : Should be "nvidia,tegra<chip>-usb-phy".
+ - compatible : For Tegra20, must contain "nvidia,tegra20-usb-phy".
+   For Tegra30, must contain "nvidia,tegra30-usb-phy".  Otherwise, must contain
+   "nvidia,<chip>-usb-phy" plus at least one of the above, where <chip> is
+   tegra114, tegra124, tegra132, or tegra210.
  - reg : Defines the following set of registers, in the order listed:
    - The PHY's own register set.
      Always present.

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -7,6 +7,7 @@ abilis	Abilis Systems
 active-semi	Active-Semi International Inc
 ad	Avionic Design GmbH
 adapteva	Adapteva, Inc.
+adh	AD Holdings Plc.
 adi	Analog Devices, Inc.
 aeroflexgaisler	Aeroflex Gaisler AB
 allwinner	Allwinner Technology Co., Ltd.
@@ -57,6 +58,7 @@ est	ESTeem Wireless Modems
 ettus	NI Ettus Research
 eukrea  Eukréa Electromatique
 everest	Everest Semiconductor Co. Ltd.
+everspin	Everspin Technologies, Inc.
 excito	Excito
 fcs	Fairchild Semiconductor
 fsl	Freescale Semiconductor
@@ -70,6 +72,7 @@ gumstix	Gumstix, Inc.
 gw	Gateworks Corporation
 hannstar	HannStar Display Corporation
 haoyu	Haoyu Microelectronic Co. Ltd.
+himax	Himax Technologies, Inc.
 hisilicon	Hisilicon Limited.
 hit	Hitachi Ltd.
 honeywell	Honeywell
@@ -83,8 +86,7 @@ innolux	Innolux Corporation
 intel	Intel Corporation
 intercontrol	Inter Control Group
 isee	ISEE 2007 S.L.
-isil    Intersil (deprecated, use isl)
-isl	Intersil
+isil	Intersil
 karo	Ka-Ro electronics GmbH
 keymile	Keymile GmbH
 lacie	LaCie
@@ -119,6 +121,7 @@ nvidia	NVIDIA
 nxp	NXP Semiconductors
 onnn	ON Semiconductor Corp.
 opencores	OpenCores.org
+ovti	OmniVision Technologies
 panasonic	Panasonic Corporation
 pericom	Pericom Technology Inc.
 phytec	PHYTEC Messtechnik GmbH
@@ -146,6 +149,7 @@ seagate	Seagate Technology PLC
 semtech	Semtech Corporation
 sil	Silicon Image
 silabs	Silicon Laboratories
+siliconmitus	Silicon Mitus, Inc.
 simtek
 sii	Seiko Instruments, Inc.
 silergy	Silergy Corp.
@@ -167,6 +171,7 @@ tlm	Trusted Logic Mobility
 toradex	Toradex AG
 toshiba	Toshiba Corporation
 toumaz	Toumaz
+truly	Truly Semiconductors Limited
 usi	Universal Scientific Industrial Co., Ltd.
 v3	V3 Semiconductor
 variscite	Variscite Ltd.

drivers/of/Kconfig

@@ -10,7 +10,6 @@ menu "Device Tree and Open Firmware support"
 config OF_UNITTEST
 	bool "Device Tree runtime unit tests"
 	depends on OF_IRQ && OF_EARLY_FLATTREE
-	select OF_DYNAMIC
 	select OF_RESOLVE
 	help
 	  This option builds in test cases for the device tree infrastructure

drivers/of/base.c

@@ -1303,6 +1303,7 @@ int of_property_read_u64_array(const struct device_node *np,
 	}
 	return 0;
 }
+EXPORT_SYMBOL_GPL(of_property_read_u64_array);
 
 /**
  * of_property_read_string - Find and read a string from a property

drivers/of/fdt.c

@@ -762,7 +762,7 @@ static inline void early_init_dt_check_for_initrd(unsigned long node)
 #ifdef CONFIG_SERIAL_EARLYCON
 extern struct of_device_id __earlycon_of_table[];
 
-int __init early_init_dt_scan_chosen_serial(void)
+static int __init early_init_dt_scan_chosen_serial(void)
 {
 	int offset;
 	const char *p;

drivers/of/of_reserved_mem.c

@@ -265,6 +265,7 @@ int of_reserved_mem_device_init(struct device *dev)
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(of_reserved_mem_device_init);
 
 /**
  * of_reserved_mem_device_release() - release reserved memory device structures
@@ -289,3 +290,4 @@ void of_reserved_mem_device_release(struct device *dev)
 
 	rmem->ops->device_release(rmem, dev);
 }
+EXPORT_SYMBOL_GPL(of_reserved_mem_device_release);

drivers/of/unittest-data/tests-overlay.dtsi

@@ -68,6 +68,48 @@ selftest8: test-selftest8 {
 					status = "disabled";
 					reg = <8>;
 				};
+
+				i2c-test-bus {
+					compatible = "selftest-i2c-bus";
+					status = "okay";
+					reg = <50>;
+
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					test-selftest12 {
+						reg = <8>;
+						compatible = "selftest-i2c-dev";
+						status = "disabled";
+					};
+
+					test-selftest13 {
+						reg = <9>;
+						compatible = "selftest-i2c-dev";
+						status = "okay";
+					};
+
+					test-selftest14 {
+						reg = <10>;
+						compatible = "selftest-i2c-mux";
+						status = "okay";
+
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						i2c@0 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <0>;
+
+							test-mux-dev {
+								reg = <32>;
+								compatible = "selftest-i2c-dev";
+								status = "okay";
+							};
+						};
+					};
+				};
 			};
 		};
 
@@ -231,5 +273,57 @@ test-selftest111 {
 				};
 			};
 		};
+
+		/* test enable using absolute target path (i2c) */
+		overlay12 {
+			fragment@0 {
+				target-path = "/testcase-data/overlay-node/test-bus/i2c-test-bus/test-selftest12";
+				__overlay__ {
+					status = "okay";
+				};
+			};
+		};
+
+		/* test disable using absolute target path (i2c) */
+		overlay13 {
+			fragment@0 {
+				target-path = "/testcase-data/overlay-node/test-bus/i2c-test-bus/test-selftest13";
+				__overlay__ {
+					status = "disabled";
+				};
+			};
+		};
+
+		/* test mux overlay */
+		overlay15 {
+			fragment@0 {
+				target-path = "/testcase-data/overlay-node/test-bus/i2c-test-bus";
+				__overlay__ {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					test-selftest15 {
+						reg = <11>;
+						compatible = "selftest-i2c-mux";
+						status = "okay";
+
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						i2c@0 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <0>;
+
+							test-mux-dev {
+								reg = <32>;
+								compatible = "selftest-i2c-dev";
+								status = "okay";
+							};
+						};
+					};
+				};
+			};
+		};
+
 	};
 };

include/linux/mod_devicetable.h

@@ -220,8 +220,7 @@ struct serio_device_id {
 /*
  * Struct used for matching a device
  */
-struct of_device_id
-{
+struct of_device_id {
 	char	name[32];
 	char	type[32];
 	char	compatible[128];