Commit cdf49fff authored by Jakub Kicinski's avatar Jakub Kicinski

Merge branch 'clean-up-ocelot_reset-routine'

Colin Foster says:

====================
clean up ocelot_reset() routine

ocelot_reset() will soon be exported to a common library to be used by
the ocelot_ext system. This will make error values from regmap calls
possible, so they must be checked. Additionally, readx_poll_timeout()
can be substituted for the custom loop, as a simple cleanup.

I don't have hardware to verify this set directly, but there shouldn't
be any functional changes.
====================

Link: https://lore.kernel.org/r/20220917175127.161504-1-colin.foster@in-advantage.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
parents d294ad82 fa1d90b0
......@@ -6,6 +6,7 @@
*/
#include <linux/dsa/ocelot.h>
#include <linux/interrupt.h>
#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/of_net.h>
#include <linux/netdevice.h>
......@@ -25,6 +26,9 @@
#define VSC7514_VCAP_POLICER_BASE 128
#define VSC7514_VCAP_POLICER_MAX 191
#define MEM_INIT_SLEEP_US 1000
#define MEM_INIT_TIMEOUT_US 100000
static const u32 *ocelot_regmap[TARGET_MAX] = {
[ANA] = vsc7514_ana_regmap,
[QS] = vsc7514_qs_regmap,
......@@ -191,27 +195,43 @@ static const struct of_device_id mscc_ocelot_match[] = {
};
MODULE_DEVICE_TABLE(of, mscc_ocelot_match);
static int ocelot_mem_init_status(struct ocelot *ocelot)
{
unsigned int val;
int err;
err = regmap_field_read(ocelot->regfields[SYS_RESET_CFG_MEM_INIT],
&val);
return err ?: val;
}
static int ocelot_reset(struct ocelot *ocelot)
{
int retries = 100;
int err;
u32 val;
regmap_field_write(ocelot->regfields[SYS_RESET_CFG_MEM_INIT], 1);
regmap_field_write(ocelot->regfields[SYS_RESET_CFG_MEM_ENA], 1);
err = regmap_field_write(ocelot->regfields[SYS_RESET_CFG_MEM_INIT], 1);
if (err)
return err;
do {
msleep(1);
regmap_field_read(ocelot->regfields[SYS_RESET_CFG_MEM_INIT],
&val);
} while (val && --retries);
err = regmap_field_write(ocelot->regfields[SYS_RESET_CFG_MEM_ENA], 1);
if (err)
return err;
if (!retries)
return -ETIMEDOUT;
/* MEM_INIT is a self-clearing bit. Wait for it to be cleared (should be
* 100us) before enabling the switch core.
*/
err = readx_poll_timeout(ocelot_mem_init_status, ocelot, val, !val,
MEM_INIT_SLEEP_US, MEM_INIT_TIMEOUT_US);
if (err)
return err;
regmap_field_write(ocelot->regfields[SYS_RESET_CFG_MEM_ENA], 1);
regmap_field_write(ocelot->regfields[SYS_RESET_CFG_CORE_ENA], 1);
err = regmap_field_write(ocelot->regfields[SYS_RESET_CFG_MEM_ENA], 1);
if (err)
return err;
return 0;
return regmap_field_write(ocelot->regfields[SYS_RESET_CFG_CORE_ENA], 1);
}
/* Watermark encode
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment