Merge tag 'v4.1-rockchip-dts1' of...

Merge tag 'v4.1-rockchip-dts1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Merge "ARM: rockchip: dts changes for 4.1" from Heiko Stuebner:

This adds and enables the usbphy nodes on the rk3288 boards and enables
the gmac on the firefly board. A new board the Popmetal-rk3288 is also
added. And finally the pmic supplies for act8846 based boards are added,
as the act8865/act8846 driver gained supply handling in the regulator tree.

* tag 'v4.1-rockchip-dts1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: complete rk3288-evb pmic supplies
  ARM: dts: rockchip: add input supplies for the act8846 on Radxa Rock
  ARM: dts: add rk3288 PopMetal board
  dt-bindings: add root compatible property for PopMetal board
  ARM: dts: rockchip: enable gmac on rk3288-firefly
  ARM: dts: rockchip: enable usbphy on rk3288-firefly
  ARM: dts: rockchip: Enable usb PHY on rk3288-evb board
  ARM: dts: rockchip: add rk3288 usb PHY
Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/arm/rockchip.txt

@@ -22,3 +22,7 @@ Rockchip platforms device tree bindings
       - compatible = "firefly,firefly-rk3288", "rockchip,rk3288";
     or
       - compatible = "firefly,firefly-rk3288-beta", "rockchip,rk3288";
+
+- ChipSPARK PopMetal-RK3288 board:
+    Required root node properties:
+      - compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";

arch/arm/boot/dts/rk3188-radxarock.dts

@@ -103,6 +103,14 @@ vcc_host: usb-host-regulator {
 		regulator-always-on;
 		regulator-boot-on;
 	};
+
+	vsys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
 };
 
 &emac {
@@ -148,6 +156,14 @@ act8846: act8846@5a {
 		pinctrl-names = "default";
 		pinctrl-0 = <&act8846_dvs0_ctl>;
 
+		vp1-supply = <&vsys>;
+		vp2-supply = <&vsys>;
+		vp3-supply = <&vsys>;
+		vp4-supply = <&vsys>;
+		inl1-supply = <&vcc_io>;
+		inl2-supply = <&vsys>;
+		inl3-supply = <&vsys>;
+
 		regulators {
 			vcc_ddr: REG1 {
 				regulator-name = "VCC_DDR";

arch/arm/boot/dts/rk3288-evb-act8846.dts

@@ -33,6 +33,7 @@ vdd_cpu: syr827@40 {
 		regulator-max-microvolt = <1350000>;
 		regulator-always-on;
 		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
 	};
 
 	vdd_gpu: syr828@41 {
@@ -43,6 +44,7 @@ vdd_gpu: syr828@41 {
 		regulator-min-microvolt = <850000>;
 		regulator-max-microvolt = <1350000>;
 		regulator-always-on;
+		vin-supply = <&vcc_sys>;
 	};
 
 	hym8563@51 {
@@ -64,6 +66,14 @@ act8846: act8846@5a {
 		reg = <0x5a>;
 		status = "okay";
 
+		vp1-supply = <&vcc_sys>;
+		vp2-supply = <&vcc_sys>;
+		vp3-supply = <&vcc_sys>;
+		vp4-supply = <&vcc_sys>;
+		inl1-supply = <&vcc_io>;
+		inl2-supply = <&vcc_sys>;
+		inl3-supply = <&vcc_20>;
+
 		regulators {
 			vcc_ddr: REG1 {
 				regulator-name = "VCC_DDR";

arch/arm/boot/dts/rk3288-evb-rk808.dts

@@ -43,9 +43,16 @@ rk808: pmic@1b {
 		#clock-cells = <1>;
 		clock-output-names = "xin32k", "rk808-clkout2";
 
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
 		vcc8-supply = <&vcc_18>;
 		vcc9-supply = <&vcc_io>;
 		vcc10-supply = <&vcc_io>;
+		vcc11-supply = <&vcc_sys>;
 		vcc12-supply = <&vcc_io>;
 		vddio-supply = <&vccio_pmu>;
 

arch/arm/boot/dts/rk3288-evb.dtsi

@@ -103,6 +103,15 @@ vcc_phy: vcc-phy-regulator {
 		regulator-always-on;
 		regulator-boot-on;
 	};
+
+	vcc_sys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
 };
 
 &emmc {
@@ -238,6 +247,10 @@ eth_phy_pwr: eth-phy-pwr {
 	};
 };
 
+&usbphy {
+	status = "okay";
+};
+
 &usb_host0_ehci {
 	status = "okay";
 };

arch/arm/boot/dts/rk3288-firefly.dtsi

@@ -179,6 +179,22 @@ &emmc {
 	status = "okay";
 };
 
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	clock_in_out = "input";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "ok";
+};
+
 &hdmi {
 	ddc-i2c-bus = <&i2c5>;
 	status = "okay";
@@ -459,6 +475,10 @@ &uart3 {
 	status = "okay";
 };
 
+&usbphy {
+	status = "okay";
+};
+
 &usb_host1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usbhub_rst>;

arch/arm/boot/dts/rk3288.dtsi

@@ -419,6 +419,8 @@ usb_host0_ehci: usb@ff500000 {
 		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_USBHOST0>;
 		clock-names = "usbhost";
+		phys = <&usbphy1>;
+		phy-names = "usb";
 		status = "disabled";
 	};
 
@@ -431,6 +433,8 @@ usb_host1: usb@ff540000 {
 		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_USBHOST1>;
 		clock-names = "otg";
+		phys = <&usbphy2>;
+		phy-names = "usb2-phy";
 		status = "disabled";
 	};
 
@@ -441,6 +445,8 @@ usb_otg: usb@ff580000 {
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_OTG0>;
 		clock-names = "otg";
+		phys = <&usbphy0>;
+		phy-names = "usb2-phy";
 		status = "disabled";
 	};
 
@@ -697,6 +703,35 @@ gic: interrupt-controller@ffc01000 {
 		interrupts = <GIC_PPI 9 0xf04>;
 	};
 
+	usbphy: phy {
+		compatible = "rockchip,rk3288-usb-phy";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		usbphy0: usb-phy0 {
+			#phy-cells = <0>;
+			reg = <0x320>;
+			clocks = <&cru SCLK_OTGPHY0>;
+			clock-names = "phyclk";
+		};
+
+		usbphy1: usb-phy1 {
+			#phy-cells = <0>;
+			reg = <0x334>;
+			clocks = <&cru SCLK_OTGPHY1>;
+			clock-names = "phyclk";
+		};
+
+		usbphy2: usb-phy2 {
+			#phy-cells = <0>;
+			reg = <0x348>;
+			clocks = <&cru SCLK_OTGPHY2>;
+			clock-names = "phyclk";
+		};
+	};
+
 	pinctrl: pinctrl {
 		compatible = "rockchip,rk3288-pinctrl";
 		rockchip,grf = <&grf>;