ARM: remove u300 platform

The Ericsson U300 platform was one of two ARM929 based SoC platforms for
mobile phones in ST-Ericsson after the merger of Ericsson with ST-NXP
into ST-Ericsson, the other one being the ST Nomadik.

The platform was not widely adopted in Linux based systems and was
replaced with the far superior ST-Ericsson U8500 in 2011, but Linus
Walleij kept maintaining the code for the whole time.

Linus continues to use the Nomadik machine, but decided to drop
u300 from the kernel as part of this year's spring cleaning.
Thanks for having maintained it all these years.

Cc: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/lkml/CACRpkdbJkiHR9FSfJTH_5d_qRU1__dRXHM1TL40iqNRKbGQfrQ@mail.gmail.com/Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/arm/ste-u300.txt

-ST-Ericsson U300 Device Tree Bindings
-
-For various board the "board" node may contain specific properties
-that pertain to this particular board, such as board-specific GPIOs
-or board power regulator supplies.
-
-Required root node property:
-
-compatible="stericsson,u300";
-
-Required node: syscon
-This contains the system controller.
-- compatible: must be "stericsson,u300-syscon".
-- reg: the base address and size of the system controller.
-
-Boards with the U300 SoC include:
-
-S365 "Small Board U365":
-
-Required node: s365
-This contains the board-specific information.
-- compatible: must be "stericsson,s365".
-- vana15-supply: the regulator supplying the 1.5V to drive the
-  board.
-- syscon: a pointer to the syscon node so we can access the
-  syscon registers to set the board as self-powered.
-
-Example:
-
-/ {
-	model = "ST-Ericsson U300";
-	compatible = "stericsson,u300";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	s365 {
-		compatible = "stericsson,s365";
-		vana15-supply = <&ab3100_ldo_d_reg>;
-		syscon = <&syscon>;
-	};
-
-	syscon: syscon@c0011000 {
-		compatible = "stericsson,u300-syscon";
-		reg = <0xc0011000 0x1000>;
-	};
-};

MAINTAINERS

@@ -2136,7 +2136,7 @@ ARM/NEC MOBILEPRO 900/c MACHINE SUPPORT
 M:	Michael Petchkovsky <mkpetch@internode.on.net>
 S:	Maintained
 
-ARM/NOMADIK/U300/Ux500 ARCHITECTURES
+ARM/NOMADIK/Ux500 ARCHITECTURES
 M:	Linus Walleij <linus.walleij@linaro.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
@@ -2145,35 +2145,23 @@ F:	Documentation/devicetree/bindings/arm/ste-*
 F:	Documentation/devicetree/bindings/arm/ux500.yaml
 F:	Documentation/devicetree/bindings/arm/ux500/
 F:	Documentation/devicetree/bindings/i2c/i2c-nomadik.txt
-F:	Documentation/devicetree/bindings/i2c/i2c-stu300.txt
 F:	arch/arm/boot/dts/ste-*
 F:	arch/arm/mach-nomadik/
-F:	arch/arm/mach-u300/
 F:	arch/arm/mach-ux500/
 F:	drivers/clk/clk-nomadik.c
-F:	drivers/clk/clk-u300.c
 F:	drivers/clocksource/clksrc-dbx500-prcmu.c
-F:	drivers/clocksource/timer-u300.c
-F:	drivers/dma/coh901318*
 F:	drivers/dma/ste_dma40*
 F:	drivers/hwspinlock/u8500_hsem.c
 F:	drivers/i2c/busses/i2c-nomadik.c
-F:	drivers/i2c/busses/i2c-stu300.c
 F:	drivers/iio/adc/ab8500-gpadc.c
-F:	drivers/mfd/ab3100*
 F:	drivers/mfd/ab8500*
 F:	drivers/mfd/abx500*
 F:	drivers/mfd/db8500*
 F:	drivers/mfd/dbx500*
 F:	drivers/pinctrl/nomadik/
-F:	drivers/pinctrl/pinctrl-coh901*
-F:	drivers/pinctrl/pinctrl-u300.c
-F:	drivers/rtc/rtc-ab3100.c
 F:	drivers/rtc/rtc-ab8500.c
-F:	drivers/rtc/rtc-coh901331.c
 F:	drivers/rtc/rtc-pl031.c
 F:	drivers/soc/ux500/
-F:	drivers/watchdog/coh901327_wdt.c
 
 ARM/NUVOTON NPCM ARCHITECTURE
 M:	Avi Fishman <avifishman70@gmail.com>

arch/arm/Kconfig

@@ -704,8 +704,6 @@ source "arch/arm/mach-sunxi/Kconfig"
 
 source "arch/arm/mach-tegra/Kconfig"
 
-source "arch/arm/mach-u300/Kconfig"
-
 source "arch/arm/mach-uniphier/Kconfig"
 
 source "arch/arm/mach-ux500/Kconfig"

arch/arm/Kconfig.debug

@@ -1280,14 +1280,6 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on Tegra based platforms.
 
-	config DEBUG_U300_UART
-		bool "Kernel low-level debugging messages via U300 UART0"
-		depends on ARCH_U300
-		select DEBUG_UART_PL01X
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the uart port on U300 devices.
-
 	config DEBUG_UX500_UART
 		depends on ARCH_U8500
 		bool "Use Ux500 UART for low-level debug"
@@ -1650,7 +1642,6 @@ config DEBUG_UART_PHYS
 	default 0x808c0000 if DEBUG_EP93XX || ARCH_EP93XX
 	default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
 	default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX
-	default 0xc0013000 if DEBUG_U300_UART
 	default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
 	default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
 	default 0xd0000000 if DEBUG_SPEAR3XX
@@ -1804,7 +1795,6 @@ config DEBUG_UART_VIRT
 	default 0xfefb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
 	default 0xfefb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
 	default 0xfefb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
-	default 0xff003000 if DEBUG_U300_UART
 	default 0xffd01000 if DEBUG_HIP01_UART
 	default DEBUG_UART_PHYS if !MMU
 	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \

arch/arm/Makefile

@@ -214,7 +214,6 @@ machine-$(CONFIG_ARCH_STI)		+= sti
 machine-$(CONFIG_ARCH_STM32)		+= stm32
 machine-$(CONFIG_ARCH_SUNXI)		+= sunxi
 machine-$(CONFIG_ARCH_TEGRA)		+= tegra
-machine-$(CONFIG_ARCH_U300)		+= u300
 machine-$(CONFIG_ARCH_U8500)		+= ux500
 machine-$(CONFIG_ARCH_VERSATILE)	+= versatile
 machine-$(CONFIG_ARCH_VEXPRESS)		+= vexpress

arch/arm/boot/dts/Makefile

@@ -1255,8 +1255,6 @@ dtb-$(CONFIG_ARCH_TEGRA_124_SOC) += \
 	tegra124-nyan-big.dtb \
 	tegra124-nyan-blaze.dtb \
 	tegra124-venice2.dtb
-dtb-$(CONFIG_ARCH_U300) += \
-	ste-u300.dtb
 dtb-$(CONFIG_ARCH_U8500) += \
 	ste-snowball.dtb \
 	ste-hrefprev60-stuib.dtb \

arch/arm/configs/u300_defconfig

-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-# CONFIG_AIO is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_U300=y
-CONFIG_MACH_U300_SPIDUMMY=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072"
-CONFIG_CPU_IDLE=y
-# CONFIG_SUSPEND is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_FSMC=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_LEGACY_PTY_COUNT=16
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_FB=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_MMC_ARMMMCI=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_COH901331=y
-CONFIG_DMADEVICES=y
-CONFIG_COH901318=y
-# CONFIG_DNOTIFY is not set
-CONFIG_FUSE_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_FS=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_PREEMPT is not set

arch/arm/mach-u300/Kconfig

-# SPDX-License-Identifier: GPL-2.0
-menuconfig ARCH_U300
-	bool "ST-Ericsson U300 Series"
-	depends on ARCH_MULTI_V5 && MMU
-	select ARM_AMBA
-	select ARM_VIC
-	select U300_TIMER
-	select CPU_ARM926T
-	select GPIOLIB
-	select HAVE_TCM
-	select PINCTRL
-	select PINCTRL_COH901
-	select PINCTRL_U300
-	select MFD_SYSCON
-	help
-	  Support for ST-Ericsson U300 series mobile platforms.
-
-if ARCH_U300
-
-config MACH_U300
-	depends on ARCH_U300
-	bool "U300"
-	default y
-
-config U300_DEBUG
-	depends on ARCH_U300
-	bool "Debug support for U300"
-	depends on PM
-	help
-		Debug support for U300 in sysfs, procfs etc.
-
-endif

arch/arm/mach-u300/Makefile

-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for the linux kernel, U300 machine.
-#
-
-obj-y		:= core.o
-
-obj-$(CONFIG_REGULATOR_AB3100)    += regulator.o

arch/arm/mach-u300/regulator.c

-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-u300/regulator.c
- *
- * Copyright (C) 2009 ST-Ericsson AB
- * Handle board-bound regulators and board power not related
- * to any devices.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-#include <linux/device.h>
-#include <linux/signal.h>
-#include <linux/err.h>
-#include <linux/of.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/consumer.h>
-#include <linux/mfd/syscon.h>
-#include <linux/regmap.h>
-
-/* Power Management Control 16bit (R/W) */
-#define U300_SYSCON_PMCR					(0x50)
-#define U300_SYSCON_PMCR_DCON_ENABLE				(0x0002)
-#define U300_SYSCON_PMCR_PWR_MGNT_ENABLE			(0x0001)
-
-/*
- * Regulators that power the board and chip and which are
- * not copuled to specific drivers are hogged in these
- * instances.
- */
-static struct regulator *main_power_15;
-
-/*
- * This function is used from pm.h to shut down the system by
- * resetting all regulators in turn and then disable regulator
- * LDO D (main power).
- */
-void u300_pm_poweroff(void)
-{
-	sigset_t old, all;
-
-	sigfillset(&all);
-	if (!sigprocmask(SIG_BLOCK, &all, &old)) {
-		/* Disable LDO D to shut down the system */
-		if (main_power_15)
-			regulator_disable(main_power_15);
-		else
-			pr_err("regulator not available to shut down system\n");
-		(void) sigprocmask(SIG_SETMASK, &old, NULL);
-	}
-	return;
-}
-
-/*
- * Hog the regulators needed to power up the board.
- */
-static int __init __u300_init_boardpower(struct platform_device *pdev)
-{
-	struct device_node *np = pdev->dev.of_node;
-	struct device_node *syscon_np;
-	struct regmap *regmap;
-	int err;
-
-	pr_info("U300: setting up board power\n");
-
-	syscon_np = of_parse_phandle(np, "syscon", 0);
-	if (!syscon_np) {
-		pr_crit("U300: no syscon node\n");
-		return -ENODEV;
-	}
-	regmap = syscon_node_to_regmap(syscon_np);
-	if (IS_ERR(regmap)) {
-		pr_crit("U300: could not locate syscon regmap\n");
-		return PTR_ERR(regmap);
-	}
-
-	main_power_15 = regulator_get(&pdev->dev, "vana15");
-
-	if (IS_ERR(main_power_15)) {
-		pr_err("could not get vana15");
-		return PTR_ERR(main_power_15);
-	}
-	err = regulator_enable(main_power_15);
-	if (err) {
-		pr_err("could not enable vana15\n");
-		return err;
-	}
-
-	/*
-	 * On U300 a special system controller register pulls up the DC
-	 * until the vana15 (LDO D) regulator comes up. At this point, all
-	 * regulators are set and we do not need power control via
-	 * DC ON anymore. This function will likely be moved whenever
-	 * the rest of the U300 power management is implemented.
-	 */
-	pr_info("U300: disable system controller pull-up\n");
-	regmap_update_bits(regmap, U300_SYSCON_PMCR,
-			   U300_SYSCON_PMCR_DCON_ENABLE, 0);
-
-	/* Register globally exported PM poweroff hook */
-	pm_power_off = u300_pm_poweroff;
-
-	return 0;
-}
-
-static int __init s365_board_probe(struct platform_device *pdev)
-{
-	return __u300_init_boardpower(pdev);
-}
-
-static const struct of_device_id s365_board_match[] = {
-	{ .compatible = "stericsson,s365" },
-	{},
-};
-
-static struct platform_driver s365_board_driver = {
-	.driver		= {
-		.name   = "s365-board",
-		.of_match_table = s365_board_match,
-	},
-};
-
-/*
- * So at module init time we hog the regulator!
- */
-static int __init u300_init_boardpower(void)
-{
-	return platform_driver_probe(&s365_board_driver,
-				     s365_board_probe);
-}
-
-device_initcall(u300_init_boardpower);
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Linus Walleij");

drivers/mtd/nand/raw/Kconfig

@@ -331,8 +331,7 @@ source "drivers/mtd/nand/raw/ingenic/Kconfig"
 config MTD_NAND_FSMC
 	tristate "ST Micros FSMC NAND controller"
 	depends on OF && HAS_IOMEM
-	depends on PLAT_SPEAR || ARCH_NOMADIK || ARCH_U8500 || MACH_U300 || \
-		   COMPILE_TEST
+	depends on PLAT_SPEAR || ARCH_NOMADIK || ARCH_U8500 || COMPILE_TEST
 	help
 	  Enables support for NAND Flash chips on the ST Microelectronics
 	  Flexible Static Memory Controller (FSMC)

drivers/spi/Kconfig

@@ -601,7 +601,6 @@ config SPI_PIC32_SQI
 config SPI_PL022
 	tristate "ARM AMBA PL022 SSP controller"
 	depends on ARM_AMBA
-	default y if MACH_U300
 	default y if ARCH_REALVIEW
 	default y if INTEGRATOR_IMPD1
 	default y if ARCH_VERSATILE