PM / OPP: Pass struct dev_pm_opp_supply to _set_opp_voltage()

Pass the entire supply structure instead of all of its fields.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dave Gerlach <d-gerlach@ti.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

drivers/base/power/opp/core.c

@@ -542,8 +542,7 @@ static struct clk *_get_opp_clk(struct device *dev)
 }
 
 static int _set_opp_voltage(struct device *dev, struct regulator *reg,
-			    unsigned long u_volt, unsigned long u_volt_min,
-			    unsigned long u_volt_max)
+			    struct dev_pm_opp_supply *supply)
 {
 	int ret;
 
@@ -554,14 +553,15 @@ static int _set_opp_voltage(struct device *dev, struct regulator *reg,
 		return 0;
 	}
 
-	dev_dbg(dev, "%s: voltages (mV): %lu %lu %lu\n", __func__, u_volt_min,
-		u_volt, u_volt_max);
+	dev_dbg(dev, "%s: voltages (mV): %lu %lu %lu\n", __func__,
+		supply->u_volt_min, supply->u_volt, supply->u_volt_max);
 
-	ret = regulator_set_voltage_triplet(reg, u_volt_min, u_volt,
-					    u_volt_max);
+	ret = regulator_set_voltage_triplet(reg, supply->u_volt_min,
+					    supply->u_volt, supply->u_volt_max);
 	if (ret)
 		dev_err(dev, "%s: failed to set voltage (%lu %lu %lu mV): %d\n",
-			__func__, u_volt_min, u_volt, u_volt_max, ret);
+			__func__, supply->u_volt_min, supply->u_volt,
+			supply->u_volt_max, ret);
 
 	return ret;
 }
@@ -583,8 +583,7 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 	struct regulator *reg;
 	struct clk *clk;
 	unsigned long freq, old_freq;
-	unsigned long u_volt, u_volt_min, u_volt_max;
-	unsigned long old_u_volt, old_u_volt_min, old_u_volt_max;
+	struct dev_pm_opp_supply old_supply, new_supply;
 	int ret;
 
 	if (unlikely(!target_freq)) {
@@ -634,17 +633,12 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 		return ret;
 	}
 
-	if (IS_ERR(old_opp)) {
-		old_u_volt = 0;
-	} else {
-		old_u_volt = old_opp->supply.u_volt;
-		old_u_volt_min = old_opp->supply.u_volt_min;
-		old_u_volt_max = old_opp->supply.u_volt_max;
-	}
+	if (IS_ERR(old_opp))
+		old_supply.u_volt = 0;
+	else
+		memcpy(&old_supply, &old_opp->supply, sizeof(old_supply));
 
-	u_volt = opp->supply.u_volt;
-	u_volt_min = opp->supply.u_volt_min;
-	u_volt_max = opp->supply.u_volt_max;
+	memcpy(&new_supply, &opp->supply, sizeof(new_supply));
 
 	reg = opp_table->regulator;
 
@@ -652,8 +646,7 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 
 	/* Scaling up? Scale voltage before frequency */
 	if (freq > old_freq) {
-		ret = _set_opp_voltage(dev, reg, u_volt, u_volt_min,
-				       u_volt_max);
+		ret = _set_opp_voltage(dev, reg, &new_supply);
 		if (ret)
 			goto restore_voltage;
 	}
@@ -672,8 +665,7 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 
 	/* Scaling down? Scale voltage after frequency */
 	if (freq < old_freq) {
-		ret = _set_opp_voltage(dev, reg, u_volt, u_volt_min,
-				       u_volt_max);
+		ret = _set_opp_voltage(dev, reg, &new_supply);
 		if (ret)
 			goto restore_freq;
 	}
@@ -686,10 +678,8 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 			__func__, old_freq);
 restore_voltage:
 	/* This shouldn't harm even if the voltages weren't updated earlier */
-	if (old_u_volt) {
-		_set_opp_voltage(dev, reg, old_u_volt, old_u_volt_min,
-				 old_u_volt_max);
-	}
+	if (old_supply.u_volt)
+		_set_opp_voltage(dev, reg, &old_supply);
 
 	return ret;
 }