drm/i915: Gather the HDMI level shifter logic into one place

The knowledge about the HDMI/DVI DDI translation table was scattered
around.
  - info->hdmi_level_shift was initialized with 6, the index of the 800
    mV, 0dB translation
  - A check on the VBT value was done to ensure it wasn't overflowing
    the translation table (< 0xC)
  - The actual programming was done in intel_ddi.c

As we need to change that knowledge for Broadwell, let's gather
everything into one place.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/i915_drv.h

@@ -1232,6 +1232,12 @@ enum modeset_restore {
 };
 
 struct ddi_vbt_port_info {
+	/*
+	 * This is an index in the HDMI/DVI DDI buffer translation table.
+	 * The special value HDMI_LEVEL_SHIFT_UNKNOWN means the VBT didn't
+	 * populate this field.
+	 */
+#define HDMI_LEVEL_SHIFT_UNKNOWN	0xff
 	uint8_t hdmi_level_shift;
 
 	uint8_t supports_dvi:1;

drivers/gpu/drm/i915/intel_bios.c

@@ -976,12 +976,10 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port,
 	if (bdb->version >= 158) {
 		/* The VBT HDMI level shift values match the table we have. */
 		hdmi_level_shift = child->raw[7] & 0xF;
-		if (hdmi_level_shift < 0xC) {
-			DRM_DEBUG_KMS("VBT HDMI level shift for port %c: %d\n",
-				      port_name(port),
-				      hdmi_level_shift);
-			info->hdmi_level_shift = hdmi_level_shift;
-		}
+		DRM_DEBUG_KMS("VBT HDMI level shift for port %c: %d\n",
+			      port_name(port),
+			      hdmi_level_shift);
+		info->hdmi_level_shift = hdmi_level_shift;
 	}
 }
 
@@ -1114,8 +1112,7 @@ init_vbt_defaults(struct drm_i915_private *dev_priv)
 		struct ddi_vbt_port_info *info =
 			&dev_priv->vbt.ddi_port_info[port];
 
-		/* Recommended BSpec default: 800mV 0dB. */
-		info->hdmi_level_shift = 6;
+		info->hdmi_level_shift = HDMI_LEVEL_SHIFT_UNKNOWN;
 
 		info->supports_dvi = (port != PORT_A && port != PORT_E);
 		info->supports_hdmi = info->supports_dvi;

drivers/gpu/drm/i915/intel_ddi.c

@@ -145,7 +145,7 @@ static void intel_prepare_ddi_buffers(struct drm_device *dev, enum port port)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 reg;
-	int i;
+	int i, n_hdmi_entries, hdmi_800mV_0dB;
 	int hdmi_level = dev_priv->vbt.ddi_port_info[port].hdmi_level_shift;
 	const u32 *ddi_translations_fdi;
 	const u32 *ddi_translations_dp;
@@ -156,15 +156,21 @@ static void intel_prepare_ddi_buffers(struct drm_device *dev, enum port port)
 		ddi_translations_fdi = bdw_ddi_translations_fdi;
 		ddi_translations_dp = bdw_ddi_translations_dp;
 		ddi_translations_edp = bdw_ddi_translations_edp;
+		n_hdmi_entries = ARRAY_SIZE(hsw_ddi_translations_hdmi);
+		hdmi_800mV_0dB = 6;
 	} else if (IS_HASWELL(dev)) {
 		ddi_translations_fdi = hsw_ddi_translations_fdi;
 		ddi_translations_dp = hsw_ddi_translations_dp;
 		ddi_translations_edp = hsw_ddi_translations_dp;
+		n_hdmi_entries = ARRAY_SIZE(hsw_ddi_translations_hdmi);
+		hdmi_800mV_0dB = 6;
 	} else {
 		WARN(1, "ddi translation table missing\n");
 		ddi_translations_edp = bdw_ddi_translations_dp;
 		ddi_translations_fdi = bdw_ddi_translations_fdi;
 		ddi_translations_dp = bdw_ddi_translations_dp;
+		n_hdmi_entries = ARRAY_SIZE(hsw_ddi_translations_hdmi);
+		hdmi_800mV_0dB = 6;
 	}
 
 	switch (port) {
@@ -193,6 +199,12 @@ static void intel_prepare_ddi_buffers(struct drm_device *dev, enum port port)
 		I915_WRITE(reg, ddi_translations[i]);
 		reg += 4;
 	}
+
+	/* Choose a good default if VBT is badly populated */
+	if (hdmi_level == HDMI_LEVEL_SHIFT_UNKNOWN ||
+	    hdmi_level >= n_hdmi_entries)
+		hdmi_level = hdmi_800mV_0dB;
+
 	/* Entry 9 is for HDMI: */
 	for (i = 0; i < 2; i++) {
 		I915_WRITE(reg, hsw_ddi_translations_hdmi[hdmi_level * 2 + i]);