Commit ce8ebe0d authored by Kevin Hilman's avatar Kevin Hilman

OMAP3+: voltage domain: move PMIC struct from vdd_info into struct voltagedomain

Move structure containing PMIC configurable settings into struct
voltagedomain.  In the process, rename from omap_volt_pmic_info to
omap_voltdm_pmic (_info suffix is not helpful.)

No functional changes.
Signed-off-by: default avatarKevin Hilman <khilman@ti.com>
parent 24d3194a
......@@ -143,7 +143,7 @@ static u8 twl6030_uv_to_vsel(unsigned long uv)
return DIV_ROUND_UP(uv - 600000, 12500) + 1;
}
static struct omap_volt_pmic_info omap3_mpu_volt_info = {
static struct omap_voltdm_pmic omap3_mpu_pmic = {
.slew_rate = 4000,
.step_size = 12500,
.on_volt = 1200000,
......@@ -163,7 +163,7 @@ static struct omap_volt_pmic_info omap3_mpu_volt_info = {
.uv_to_vsel = twl4030_uv_to_vsel,
};
static struct omap_volt_pmic_info omap3_core_volt_info = {
static struct omap_voltdm_pmic omap3_core_pmic = {
.slew_rate = 4000,
.step_size = 12500,
.on_volt = 1200000,
......@@ -183,7 +183,7 @@ static struct omap_volt_pmic_info omap3_core_volt_info = {
.uv_to_vsel = twl4030_uv_to_vsel,
};
static struct omap_volt_pmic_info omap4_mpu_volt_info = {
static struct omap_voltdm_pmic omap4_mpu_pmic = {
.slew_rate = 4000,
.step_size = 12500,
.on_volt = 1350000,
......@@ -203,7 +203,7 @@ static struct omap_volt_pmic_info omap4_mpu_volt_info = {
.uv_to_vsel = twl6030_uv_to_vsel,
};
static struct omap_volt_pmic_info omap4_iva_volt_info = {
static struct omap_voltdm_pmic omap4_iva_pmic = {
.slew_rate = 4000,
.step_size = 12500,
.on_volt = 1100000,
......@@ -223,7 +223,7 @@ static struct omap_volt_pmic_info omap4_iva_volt_info = {
.uv_to_vsel = twl6030_uv_to_vsel,
};
static struct omap_volt_pmic_info omap4_core_volt_info = {
static struct omap_voltdm_pmic omap4_core_pmic = {
.slew_rate = 4000,
.step_size = 12500,
.on_volt = 1100000,
......@@ -251,13 +251,13 @@ int __init omap4_twl_init(void)
return -ENODEV;
voltdm = voltdm_lookup("mpu");
omap_voltage_register_pmic(voltdm, &omap4_mpu_volt_info);
omap_voltage_register_pmic(voltdm, &omap4_mpu_pmic);
voltdm = voltdm_lookup("iva");
omap_voltage_register_pmic(voltdm, &omap4_iva_volt_info);
omap_voltage_register_pmic(voltdm, &omap4_iva_pmic);
voltdm = voltdm_lookup("core");
omap_voltage_register_pmic(voltdm, &omap4_core_volt_info);
omap_voltage_register_pmic(voltdm, &omap4_core_pmic);
return 0;
}
......@@ -270,10 +270,10 @@ int __init omap3_twl_init(void)
return -ENODEV;
if (cpu_is_omap3630()) {
omap3_mpu_volt_info.vp_vddmin = OMAP3630_VP1_VLIMITTO_VDDMIN;
omap3_mpu_volt_info.vp_vddmax = OMAP3630_VP1_VLIMITTO_VDDMAX;
omap3_core_volt_info.vp_vddmin = OMAP3630_VP2_VLIMITTO_VDDMIN;
omap3_core_volt_info.vp_vddmax = OMAP3630_VP2_VLIMITTO_VDDMAX;
omap3_mpu_pmic.vp_vddmin = OMAP3630_VP1_VLIMITTO_VDDMIN;
omap3_mpu_pmic.vp_vddmax = OMAP3630_VP1_VLIMITTO_VDDMAX;
omap3_core_pmic.vp_vddmin = OMAP3630_VP2_VLIMITTO_VDDMIN;
omap3_core_pmic.vp_vddmax = OMAP3630_VP2_VLIMITTO_VDDMAX;
}
/*
......@@ -289,10 +289,10 @@ int __init omap3_twl_init(void)
omap3_twl_set_sr_bit(true);
voltdm = voltdm_lookup("mpu_iva");
omap_voltage_register_pmic(voltdm, &omap3_mpu_volt_info);
omap_voltage_register_pmic(voltdm, &omap3_mpu_pmic);
voltdm = voltdm_lookup("core");
omap_voltage_register_pmic(voltdm, &omap3_core_volt_info);
omap_voltage_register_pmic(voltdm, &omap3_core_pmic);
return 0;
}
......
......@@ -79,13 +79,13 @@ int omap_vc_pre_scale(struct voltagedomain *voltdm,
vp_common = vdd->vp_data->vp_common;
/* Check if sufficient pmic info is available for this vdd */
if (!vdd->pmic_info) {
if (!voltdm->pmic) {
pr_err("%s: Insufficient pmic info to scale the vdd_%s\n",
__func__, voltdm->name);
return -EINVAL;
}
if (!vdd->pmic_info->uv_to_vsel) {
if (!voltdm->pmic->uv_to_vsel) {
pr_err("%s: PMIC function to convert voltage in uV to"
"vsel not registered. Hence unable to scale voltage"
"for vdd_%s\n", __func__, voltdm->name);
......@@ -103,7 +103,7 @@ int omap_vc_pre_scale(struct voltagedomain *voltdm,
if (IS_ERR(volt_data))
volt_data = NULL;
*target_vsel = vdd->pmic_info->uv_to_vsel(target_volt);
*target_vsel = voltdm->pmic->uv_to_vsel(target_volt);
*current_vsel = voltdm->read(vdd->vp_data->voltage);
/* Setting the ON voltage to the new target voltage */
......@@ -134,8 +134,8 @@ void omap_vc_post_scale(struct voltagedomain *voltdm,
smps_steps = abs(target_vsel - current_vsel);
/* SMPS slew rate / step size. 2us added as buffer. */
smps_delay = ((smps_steps * vdd->pmic_info->step_size) /
vdd->pmic_info->slew_rate) + 2;
smps_delay = ((smps_steps * voltdm->pmic->step_size) /
voltdm->pmic->slew_rate) + 2;
udelay(smps_delay);
vdd->curr_volt = target_volt;
......@@ -240,11 +240,10 @@ static void __init omap4_vc_init_channel(struct voltagedomain *voltdm)
void __init omap_vc_init_channel(struct voltagedomain *voltdm)
{
struct omap_vc_channel *vc = voltdm->vc;
struct omap_vdd_info *vdd = voltdm->vdd;
u8 on_vsel, onlp_vsel, ret_vsel, off_vsel;
u32 val;
if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) {
if (!voltdm->pmic || !voltdm->pmic->uv_to_vsel) {
pr_err("%s: PMIC info requried to configure vc for"
"vdd_%s not populated.Hence cannot initialize vc\n",
__func__, voltdm->name);
......@@ -260,10 +259,10 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm)
vc->cfg_channel = 0;
/* get PMIC/board specific settings */
vc->i2c_slave_addr = vdd->pmic_info->i2c_slave_addr;
vc->volt_reg_addr = vdd->pmic_info->volt_reg_addr;
vc->cmd_reg_addr = vdd->pmic_info->cmd_reg_addr;
vc->setup_time = vdd->pmic_info->volt_setup_time;
vc->i2c_slave_addr = voltdm->pmic->i2c_slave_addr;
vc->volt_reg_addr = voltdm->pmic->volt_reg_addr;
vc->cmd_reg_addr = voltdm->pmic->cmd_reg_addr;
vc->setup_time = voltdm->pmic->volt_setup_time;
/* Configure the i2c slave address for this VC */
voltdm->rmw(vc->smps_sa_mask,
......@@ -287,10 +286,10 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm)
}
/* Set up the on, inactive, retention and off voltage */
on_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->on_volt);
onlp_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->onlp_volt);
ret_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->ret_volt);
off_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->off_volt);
on_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->on_volt);
onlp_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->onlp_volt);
ret_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->ret_volt);
off_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->off_volt);
val = ((on_vsel << vc->common->cmd_on_shift) |
(onlp_vsel << vc->common->cmd_onlp_shift) |
(ret_vsel << vc->common->cmd_ret_shift) |
......
......@@ -36,6 +36,7 @@ struct voltagedomain;
* @cmd_onlp_shift: ONLP field shift in PRM_VC_CMD_VAL_* register
* @cmd_ret_shift: RET field shift in PRM_VC_CMD_VAL_* register
* @cmd_off_shift: OFF field shift in PRM_VC_CMD_VAL_* register
* @cfg_channel_reg: VC channel configuration register
*
* XXX One of cmd_on_mask and cmd_on_shift are not needed
* XXX VALID should probably be a shift, not a mask
......@@ -66,11 +67,14 @@ struct omap_vc_common {
* @volt_reg_addr: voltage configuration register address
* @cmd_reg_addr: command configuration register address
* @setup_time: setup time (in sys_clk cycles) of regulator for this channel
* @cfg_channel: current value of VC channel configuration register
*
* @common: pointer to VC common data for this platform
* @smps_sa_mask: i2c slave address bitmask in the PRM_VC_SMPS_SA register
* @smps_volra_mask: VOLRA* bitmask in the PRM_VC_VOL_RA register
* @smps_cmdra_mask: CMDRA* bitmask in the PRM_VC_CMD_RA register
* @cmdval_reg: register for on/ret/off voltage level values for this channel
* @cfg_channel_sa_shift: bit shift for slave address cfg_channel register
* @flags: VC channel-specific flags (optional)
*/
struct omap_vc_channel {
......
......@@ -84,20 +84,20 @@ static int __init _config_common_vdd_data(struct voltagedomain *voltdm)
vdd->vp_enabled = false;
vdd->vp_rt_data.vpconfig_erroroffset =
(vdd->pmic_info->vp_erroroffset <<
(voltdm->pmic->vp_erroroffset <<
vdd->vp_data->vp_common->vpconfig_erroroffset_shift);
timeout_val = (sys_clk_speed * vdd->pmic_info->vp_timeout_us) / 1000;
timeout_val = (sys_clk_speed * voltdm->pmic->vp_timeout_us) / 1000;
vdd->vp_rt_data.vlimitto_timeout = timeout_val;
vdd->vp_rt_data.vlimitto_vddmin = vdd->pmic_info->vp_vddmin;
vdd->vp_rt_data.vlimitto_vddmax = vdd->pmic_info->vp_vddmax;
vdd->vp_rt_data.vlimitto_vddmin = voltdm->pmic->vp_vddmin;
vdd->vp_rt_data.vlimitto_vddmax = voltdm->pmic->vp_vddmax;
waittime = ((vdd->pmic_info->step_size / vdd->pmic_info->slew_rate) *
waittime = ((voltdm->pmic->step_size / voltdm->pmic->slew_rate) *
sys_clk_speed) / 1000;
vdd->vp_rt_data.vstepmin_smpswaittimemin = waittime;
vdd->vp_rt_data.vstepmax_smpswaittimemax = waittime;
vdd->vp_rt_data.vstepmin_stepmin = vdd->pmic_info->vp_vstepmin;
vdd->vp_rt_data.vstepmax_stepmax = vdd->pmic_info->vp_vstepmax;
vdd->vp_rt_data.vstepmin_stepmin = voltdm->pmic->vp_vstepmin;
vdd->vp_rt_data.vstepmax_stepmax = voltdm->pmic->vp_vstepmax;
return 0;
}
......@@ -149,10 +149,9 @@ static void __init vdd_debugfs_init(struct voltagedomain *voltdm)
static int __init omap_vdd_data_configure(struct voltagedomain *voltdm)
{
struct omap_vdd_info *vdd = voltdm->vdd;
int ret = -EINVAL;
if (!vdd->pmic_info) {
if (!voltdm->pmic) {
pr_err("%s: PMIC info requried to configure vdd_%s not"
"populated.Hence cannot initialize vdd_%s\n",
__func__, voltdm->name, voltdm->name);
......@@ -324,24 +323,20 @@ struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
* omap_voltage_register_pmic() - API to register PMIC specific data
* @voltdm: pointer to the VDD for which the PMIC specific data is
* to be registered
* @pmic_info: the structure containing pmic info
* @pmic: the structure containing pmic info
*
* This API is to be called by the SOC/PMIC file to specify the
* pmic specific info as present in omap_volt_pmic_info structure.
* pmic specific info as present in omap_voltdm_pmic structure.
*/
int omap_voltage_register_pmic(struct voltagedomain *voltdm,
struct omap_volt_pmic_info *pmic_info)
struct omap_voltdm_pmic *pmic)
{
struct omap_vdd_info *vdd;
if (!voltdm || IS_ERR(voltdm)) {
pr_warning("%s: VDD specified does not exist!\n", __func__);
return -EINVAL;
}
vdd = voltdm->vdd;
vdd->pmic_info = pmic_info;
voltdm->pmic = pmic;
return 0;
}
......
......@@ -67,6 +67,7 @@ struct voltagedomain {
struct list_head pwrdm_list;
struct omap_vc_channel *vc;
const struct omap_vfsm_instance *vfsm;
struct omap_voltdm_pmic *pmic;
/* VC/VP register access functions: SoC specific */
u32 (*read) (u8 offset);
......@@ -96,7 +97,7 @@ struct omap_volt_data {
};
/**
* struct omap_volt_pmic_info - PMIC specific data required by voltage driver.
* struct omap_voltdm_pmic - PMIC specific data required by voltage driver.
* @slew_rate: PMIC slew rate (in uv/us)
* @step_size: PMIC voltage step size (in uv)
* @i2c_slave_addr: I2C slave address of PMIC
......@@ -105,7 +106,7 @@ struct omap_volt_data {
* @vsel_to_uv: PMIC API to convert vsel value to actual voltage in uV.
* @uv_to_vsel: PMIC API to convert voltage in uV to vsel value.
*/
struct omap_volt_pmic_info {
struct omap_voltdm_pmic {
int slew_rate;
int step_size;
u32 on_volt;
......@@ -131,8 +132,6 @@ struct omap_volt_pmic_info {
*
* @volt_data : voltage table having the distinct voltages supported
* by the domain and other associated per voltage data.
* @pmic_info : pmic specific parameters which should be populted by
* the pmic drivers.
* @vp_data : the register values, shifts, masks for various
* vp registers
* @vp_rt_data : VP data derived at runtime, not predefined
......@@ -143,7 +142,6 @@ struct omap_volt_pmic_info {
*/
struct omap_vdd_info {
struct omap_volt_data *volt_data;
struct omap_volt_pmic_info *pmic_info;
struct omap_vp_instance_data *vp_data;
struct omap_vp_runtime_data vp_rt_data;
struct dentry *debug_dir;
......@@ -165,13 +163,13 @@ unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm);
struct dentry *omap_voltage_get_dbgdir(struct voltagedomain *voltdm);
#ifdef CONFIG_PM
int omap_voltage_register_pmic(struct voltagedomain *voltdm,
struct omap_volt_pmic_info *pmic_info);
struct omap_voltdm_pmic *pmic);
void omap_change_voltscale_method(struct voltagedomain *voltdm,
int voltscale_method);
int omap_voltage_late_init(void);
#else
static inline int omap_voltage_register_pmic(struct voltagedomain *voltdm,
struct omap_volt_pmic_info *pmic_info)
struct omap_voltdm_pmic *pmic)
{
return -EINVAL;
}
......
......@@ -18,7 +18,6 @@ static void vp_latch_vsel(struct voltagedomain *voltdm)
u32 vpconfig;
unsigned long uvdc;
char vsel;
struct omap_vdd_info *vdd = voltdm->vdd;
uvdc = omap_voltage_get_nom_volt(voltdm);
if (!uvdc) {
......@@ -27,13 +26,13 @@ static void vp_latch_vsel(struct voltagedomain *voltdm)
return;
}
if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) {
if (!voltdm->pmic || !voltdm->pmic->uv_to_vsel) {
pr_warning("%s: PMIC function to convert voltage in uV to"
" vsel not registered\n", __func__);
return;
}
vsel = vdd->pmic_info->uv_to_vsel(uvdc);
vsel = voltdm->pmic->uv_to_vsel(uvdc);
vpconfig = voltdm->read(vp->vpconfig);
vpconfig &= ~(vp->vp_common->vpconfig_initvoltage_mask |
......@@ -206,13 +205,13 @@ unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm)
curr_vsel = voltdm->read(vp->voltage);
if (!vdd->pmic_info || !vdd->pmic_info->vsel_to_uv) {
if (!voltdm->pmic || !voltdm->pmic->vsel_to_uv) {
pr_warning("%s: PMIC function to convert vsel to voltage"
"in uV not registerd\n", __func__);
return 0;
}
return vdd->pmic_info->vsel_to_uv(curr_vsel);
return voltdm->pmic->vsel_to_uv(curr_vsel);
}
/**
......@@ -323,13 +322,13 @@ static int vp_volt_debug_get(void *data, u64 *val)
vsel = voltdm->read(vp->voltage);
if (!vdd->pmic_info->vsel_to_uv) {
if (!voltdm->pmic->vsel_to_uv) {
pr_warning("PMIC function to convert vsel to voltage"
"in uV not registerd\n");
return -EINVAL;
}
*val = vdd->pmic_info->vsel_to_uv(vsel);
*val = voltdm->pmic->vsel_to_uv(vsel);
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment