ARM: dts: lpc32xx: add address and size cell values to SPI controller nodes

All 4 SPI controllers on NXP LPC32xx SoC support SPI slaves discerning them
by one cell address value, set it as default to avoid duplication in board
device tree files.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>

arch/arm/boot/dts/lpc3250-phy3250.dts

@@ -202,8 +202,6 @@ mtd4@604000 {
 };
 
 &ssp0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
 	num-cs = <1>;
 	cs-gpios = <&gpio 3 5 0>;
 	status = "okay";

arch/arm/boot/dts/lpc32xx.dtsi

@@ -187,6 +187,8 @@ ssp0: spi@20084000 {
 				interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk LPC32XX_CLK_SSP0>;
 				clock-names = "apb_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				status = "disabled";
 			};
 
@@ -194,6 +196,8 @@ spi1: spi@20088000 {
 				compatible = "nxp,lpc3220-spi";
 				reg = <0x20088000 0x1000>;
 				clocks = <&clk LPC32XX_CLK_SPI1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				status = "disabled";
 			};
 
@@ -207,6 +211,8 @@ ssp1: spi@2008c000 {
 				interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk LPC32XX_CLK_SSP1>;
 				clock-names = "apb_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				status = "disabled";
 			};
 
@@ -214,6 +220,8 @@ spi2: spi@20090000 {
 				compatible = "nxp,lpc3220-spi";
 				reg = <0x20090000 0x1000>;
 				clocks = <&clk LPC32XX_CLK_SPI2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				status = "disabled";
 			};