Commit cea8f46c authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm

Pull ARM updates from Russell King:
 "First ARM push of this merge window, post me coming back from holiday.
  This is what has been in linux-next for the last few weeks.  Not much
  to say which isn't described by the commit summaries."

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (32 commits)
  ARM: 7463/1: topology: Update cpu_power according to DT information
  ARM: 7462/1: topology: factorize the update of sibling masks
  ARM: 7461/1: topology: Add arch_scale_freq_power function
  ARM: 7456/1: ptrace: provide separate functions for tracing syscall {entry,exit}
  ARM: 7455/1: audit: move syscall auditing until after ptrace SIGTRAP handling
  ARM: 7454/1: entry: don't bother with syscall tracing on ret_from_fork path
  ARM: 7453/1: audit: only allow syscall auditing for pure EABI userspace
  ARM: 7452/1: delay: allow timer-based delay implementation to be selected
  ARM: 7451/1: arch timer: implement read_current_timer and get_cycles
  ARM: 7450/1: dcache: select DCACHE_WORD_ACCESS for little-endian ARMv6+ CPUs
  ARM: 7449/1: use generic strnlen_user and strncpy_from_user functions
  ARM: 7448/1: perf: remove arm_perf_pmu_ids global enumeration
  ARM: 7447/1: rwlocks: remove unused branch labels from trylock routines
  ARM: 7446/1: spinlock: use ticket algorithm for ARMv6+ locking implementation
  ARM: 7445/1: mm: update CONTEXTIDR register to contain PID of current process
  ARM: 7444/1: kernel: add arch-timer C3STOP feature
  ARM: 7460/1: remove asm/locks.h
  ARM: 7439/1: head.S: simplify initial page table mapping
  ARM: 7437/1: zImage: Allow DTB command line concatenation with ATAG_CMDLINE
  ARM: 7436/1: Do not map the vectors page as write-through on UP systems
  ...
parents c1e7179a 91b006de
......@@ -45,6 +45,9 @@ config ARM
select GENERIC_SMP_IDLE_THREAD
select KTIME_SCALAR
select GENERIC_CLOCKEVENTS_BROADCAST if SMP
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN
help
The ARM series is a line of low-power-consumption RISC chip designs
licensed by ARM Ltd and targeted at embedded applications and
......@@ -2004,6 +2007,25 @@ config ARM_ATAG_DTB_COMPAT
bootloaders, this option allows zImage to extract the information
from the ATAG list and store it at run time into the appended DTB.
choice
prompt "Kernel command line type" if ARM_ATAG_DTB_COMPAT
default ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER
config ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER
bool "Use bootloader kernel arguments if available"
help
Uses the command-line options passed by the boot loader instead of
the device tree bootargs property. If the boot loader doesn't provide
any, the device tree bootargs property will be used.
config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND
bool "Extend with bootloader kernel arguments"
help
The command-line arguments provided by the boot loader will be
appended to the the device tree bootargs property.
endchoice
config CMDLINE
string "Default kernel command string"
default ""
......
......@@ -395,4 +395,13 @@ config ARM_KPROBES_TEST
help
Perform tests of kprobes API and instruction set simulation.
config PID_IN_CONTEXTIDR
bool "Write the current PID to the CONTEXTIDR register"
depends on CPU_COPY_V6
help
Enabling this option causes the kernel to write the current PID to
the PROCID field of the CONTEXTIDR register, at the expense of some
additional instructions during context switch. Say Y here only if you
are planning to use hardware trace tools with this kernel.
endmenu
......@@ -10,6 +10,9 @@
#
# Copyright (C) 1995-2001 by Russell King
# Ensure linker flags are correct
LDFLAGS :=
LDFLAGS_vmlinux :=-p --no-undefined -X
ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
LDFLAGS_vmlinux += --be8
......
#include <asm/setup.h>
#include <libfdt.h>
#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND)
#define do_extend_cmdline 1
#else
#define do_extend_cmdline 0
#endif
static int node_offset(void *fdt, const char *node_path)
{
int offset = fdt_path_offset(fdt, node_path);
......@@ -36,6 +42,48 @@ static int setprop_cell(void *fdt, const char *node_path,
return fdt_setprop_cell(fdt, offset, property, val);
}
static const void *getprop(const void *fdt, const char *node_path,
const char *property, int *len)
{
int offset = fdt_path_offset(fdt, node_path);
if (offset == -FDT_ERR_NOTFOUND)
return NULL;
return fdt_getprop(fdt, offset, property, len);
}
static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
{
char cmdline[COMMAND_LINE_SIZE];
const char *fdt_bootargs;
char *ptr = cmdline;
int len = 0;
/* copy the fdt command line into the buffer */
fdt_bootargs = getprop(fdt, "/chosen", "bootargs", &len);
if (fdt_bootargs)
if (len < COMMAND_LINE_SIZE) {
memcpy(ptr, fdt_bootargs, len);
/* len is the length of the string
* including the NULL terminator */
ptr += len - 1;
}
/* and append the ATAG_CMDLINE */
if (fdt_cmdline) {
len = strlen(fdt_cmdline);
if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) {
*ptr++ = ' ';
memcpy(ptr, fdt_cmdline, len);
ptr += len;
}
}
*ptr = '\0';
setprop_string(fdt, "/chosen", "bootargs", cmdline);
}
/*
* Convert and fold provided ATAGs into the provided FDT.
*
......@@ -72,8 +120,18 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space)
for_each_tag(atag, atag_list) {
if (atag->hdr.tag == ATAG_CMDLINE) {
setprop_string(fdt, "/chosen", "bootargs",
atag->u.cmdline.cmdline);
/* Append the ATAGS command line to the device tree
* command line.
* NB: This means that if the same parameter is set in
* the device tree and in the tags, the one from the
* tags will be chosen.
*/
if (do_extend_cmdline)
merge_fdt_bootargs(fdt,
atag->u.cmdline.cmdline);
else
setprop_string(fdt, "/chosen", "bootargs",
atag->u.cmdline.cmdline);
} else if (atag->hdr.tag == ATAG_MEM) {
if (memcount >= sizeof(mem_reg_property)/4)
continue;
......
#ifndef __ASMARM_ARCH_TIMER_H
#define __ASMARM_ARCH_TIMER_H
#include <asm/errno.h>
#ifdef CONFIG_ARM_ARCH_TIMER
#define ARCH_HAS_READ_CURRENT_TIMER
int arch_timer_of_register(void);
int arch_timer_sched_clock_init(void);
#else
......
......@@ -6,9 +6,22 @@
#ifndef __ASM_ARM_DELAY_H
#define __ASM_ARM_DELAY_H
#include <asm/memory.h>
#include <asm/param.h> /* HZ */
extern void __delay(int loops);
#define MAX_UDELAY_MS 2
#define UDELAY_MULT ((UL(2199023) * HZ) >> 11)
#define UDELAY_SHIFT 30
#ifndef __ASSEMBLY__
extern struct arm_delay_ops {
void (*delay)(unsigned long);
void (*const_udelay)(unsigned long);
void (*udelay)(unsigned long);
} arm_delay_ops;
#define __delay(n) arm_delay_ops.delay(n)
/*
* This function intentionally does not exist; if you see references to
......@@ -23,22 +36,27 @@ extern void __bad_udelay(void);
* division by multiplication: you don't have to worry about
* loss of precision.
*
* Use only for very small delays ( < 1 msec). Should probably use a
* Use only for very small delays ( < 2 msec). Should probably use a
* lookup table, really, as the multiplications take much too long with
* short delays. This is a "reasonable" implementation, though (and the
* first constant multiplications gets optimized away if the delay is
* a constant)
*/
extern void __udelay(unsigned long usecs);
extern void __const_udelay(unsigned long);
#define MAX_UDELAY_MS 2
#define __udelay(n) arm_delay_ops.udelay(n)
#define __const_udelay(n) arm_delay_ops.const_udelay(n)
#define udelay(n) \
(__builtin_constant_p(n) ? \
((n) > (MAX_UDELAY_MS * 1000) ? __bad_udelay() : \
__const_udelay((n) * ((2199023U*HZ)>>11))) : \
__const_udelay((n) * UDELAY_MULT)) : \
__udelay(n))
/* Loop-based definitions for assembly code. */
extern void __loop_delay(unsigned long loops);
extern void __loop_udelay(unsigned long usecs);
extern void __loop_const_udelay(unsigned long);
#endif /* __ASSEMBLY__ */
#endif /* defined(_ARM_DELAY_H) */
/*
* arch/arm/include/asm/locks.h
*
* Copyright (C) 2000 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Interrupt safe locking assembler.
*/
#ifndef __ASM_PROC_LOCKS_H
#define __ASM_PROC_LOCKS_H
#if __LINUX_ARM_ARCH__ >= 6
#define __down_op(ptr,fail) \
({ \
__asm__ __volatile__( \
"@ down_op\n" \
"1: ldrex lr, [%0]\n" \
" sub lr, lr, %1\n" \
" strex ip, lr, [%0]\n" \
" teq ip, #0\n" \
" bne 1b\n" \
" teq lr, #0\n" \
" movmi ip, %0\n" \
" blmi " #fail \
: \
: "r" (ptr), "I" (1) \
: "ip", "lr", "cc"); \
smp_mb(); \
})
#define __down_op_ret(ptr,fail) \
({ \
unsigned int ret; \
__asm__ __volatile__( \
"@ down_op_ret\n" \
"1: ldrex lr, [%1]\n" \
" sub lr, lr, %2\n" \
" strex ip, lr, [%1]\n" \
" teq ip, #0\n" \
" bne 1b\n" \
" teq lr, #0\n" \
" movmi ip, %1\n" \
" movpl ip, #0\n" \
" blmi " #fail "\n" \
" mov %0, ip" \
: "=&r" (ret) \
: "r" (ptr), "I" (1) \
: "ip", "lr", "cc"); \
smp_mb(); \
ret; \
})
#define __up_op(ptr,wake) \
({ \
smp_mb(); \
__asm__ __volatile__( \
"@ up_op\n" \
"1: ldrex lr, [%0]\n" \
" add lr, lr, %1\n" \
" strex ip, lr, [%0]\n" \
" teq ip, #0\n" \
" bne 1b\n" \
" cmp lr, #0\n" \
" movle ip, %0\n" \
" blle " #wake \
: \
: "r" (ptr), "I" (1) \
: "ip", "lr", "cc"); \
})
/*
* The value 0x01000000 supports up to 128 processors and
* lots of processes. BIAS must be chosen such that sub'ing
* BIAS once per CPU will result in the long remaining
* negative.
*/
#define RW_LOCK_BIAS 0x01000000
#define RW_LOCK_BIAS_STR "0x01000000"
#define __down_op_write(ptr,fail) \
({ \
__asm__ __volatile__( \
"@ down_op_write\n" \
"1: ldrex lr, [%0]\n" \
" sub lr, lr, %1\n" \
" strex ip, lr, [%0]\n" \
" teq ip, #0\n" \
" bne 1b\n" \
" teq lr, #0\n" \
" movne ip, %0\n" \
" blne " #fail \
: \
: "r" (ptr), "I" (RW_LOCK_BIAS) \
: "ip", "lr", "cc"); \
smp_mb(); \
})
#define __up_op_write(ptr,wake) \
({ \
smp_mb(); \
__asm__ __volatile__( \
"@ up_op_write\n" \
"1: ldrex lr, [%0]\n" \
" adds lr, lr, %1\n" \
" strex ip, lr, [%0]\n" \
" teq ip, #0\n" \
" bne 1b\n" \
" movcs ip, %0\n" \
" blcs " #wake \
: \
: "r" (ptr), "I" (RW_LOCK_BIAS) \
: "ip", "lr", "cc"); \
})
#define __down_op_read(ptr,fail) \
__down_op(ptr, fail)
#define __up_op_read(ptr,wake) \
({ \
smp_mb(); \
__asm__ __volatile__( \
"@ up_op_read\n" \
"1: ldrex lr, [%0]\n" \
" add lr, lr, %1\n" \
" strex ip, lr, [%0]\n" \
" teq ip, #0\n" \
" bne 1b\n" \
" teq lr, #0\n" \
" moveq ip, %0\n" \
" bleq " #wake \
: \
: "r" (ptr), "I" (1) \
: "ip", "lr", "cc"); \
})
#else
#define __down_op(ptr,fail) \
({ \
__asm__ __volatile__( \
"@ down_op\n" \
" mrs ip, cpsr\n" \
" orr lr, ip, #128\n" \
" msr cpsr_c, lr\n" \
" ldr lr, [%0]\n" \
" subs lr, lr, %1\n" \
" str lr, [%0]\n" \
" msr cpsr_c, ip\n" \
" movmi ip, %0\n" \
" blmi " #fail \
: \
: "r" (ptr), "I" (1) \
: "ip", "lr", "cc"); \
smp_mb(); \
})
#define __down_op_ret(ptr,fail) \
({ \
unsigned int ret; \
__asm__ __volatile__( \
"@ down_op_ret\n" \
" mrs ip, cpsr\n" \
" orr lr, ip, #128\n" \
" msr cpsr_c, lr\n" \
" ldr lr, [%1]\n" \
" subs lr, lr, %2\n" \
" str lr, [%1]\n" \
" msr cpsr_c, ip\n" \
" movmi ip, %1\n" \
" movpl ip, #0\n" \
" blmi " #fail "\n" \
" mov %0, ip" \
: "=&r" (ret) \
: "r" (ptr), "I" (1) \
: "ip", "lr", "cc"); \
smp_mb(); \
ret; \
})
#define __up_op(ptr,wake) \
({ \
smp_mb(); \
__asm__ __volatile__( \
"@ up_op\n" \
" mrs ip, cpsr\n" \
" orr lr, ip, #128\n" \
" msr cpsr_c, lr\n" \
" ldr lr, [%0]\n" \
" adds lr, lr, %1\n" \
" str lr, [%0]\n" \
" msr cpsr_c, ip\n" \
" movle ip, %0\n" \
" blle " #wake \
: \
: "r" (ptr), "I" (1) \
: "ip", "lr", "cc"); \
})
/*
* The value 0x01000000 supports up to 128 processors and
* lots of processes. BIAS must be chosen such that sub'ing
* BIAS once per CPU will result in the long remaining
* negative.
*/
#define RW_LOCK_BIAS 0x01000000
#define RW_LOCK_BIAS_STR "0x01000000"
#define __down_op_write(ptr,fail) \
({ \
__asm__ __volatile__( \
"@ down_op_write\n" \
" mrs ip, cpsr\n" \
" orr lr, ip, #128\n" \
" msr cpsr_c, lr\n" \
" ldr lr, [%0]\n" \
" subs lr, lr, %1\n" \
" str lr, [%0]\n" \
" msr cpsr_c, ip\n" \
" movne ip, %0\n" \
" blne " #fail \
: \
: "r" (ptr), "I" (RW_LOCK_BIAS) \
: "ip", "lr", "cc"); \
smp_mb(); \
})
#define __up_op_write(ptr,wake) \
({ \
__asm__ __volatile__( \
"@ up_op_write\n" \
" mrs ip, cpsr\n" \
" orr lr, ip, #128\n" \
" msr cpsr_c, lr\n" \
" ldr lr, [%0]\n" \
" adds lr, lr, %1\n" \
" str lr, [%0]\n" \
" msr cpsr_c, ip\n" \
" movcs ip, %0\n" \
" blcs " #wake \
: \
: "r" (ptr), "I" (RW_LOCK_BIAS) \
: "ip", "lr", "cc"); \
smp_mb(); \
})
#define __down_op_read(ptr,fail) \
__down_op(ptr, fail)
#define __up_op_read(ptr,wake) \
({ \
smp_mb(); \
__asm__ __volatile__( \
"@ up_op_read\n" \
" mrs ip, cpsr\n" \
" orr lr, ip, #128\n" \
" msr cpsr_c, lr\n" \
" ldr lr, [%0]\n" \
" adds lr, lr, %1\n" \
" str lr, [%0]\n" \
" msr cpsr_c, ip\n" \
" moveq ip, %0\n" \
" bleq " #wake \
: \
: "r" (ptr), "I" (1) \
: "ip", "lr", "cc"); \
})
#endif
#endif
......@@ -16,7 +16,7 @@
#include <linux/compiler.h>
#include <linux/const.h>
#include <linux/types.h>
#include <asm/sizes.h>
#include <linux/sizes.h>
#ifdef CONFIG_NEED_MACH_MEMORY_H
#include <mach/memory.h>
......
......@@ -12,21 +12,6 @@
#ifndef __ARM_PERF_EVENT_H__
#define __ARM_PERF_EVENT_H__
/* ARM perf PMU IDs for use by internal perf clients. */
enum arm_perf_pmu_ids {
ARM_PERF_PMU_ID_XSCALE1 = 0,
ARM_PERF_PMU_ID_XSCALE2,
ARM_PERF_PMU_ID_V6,
ARM_PERF_PMU_ID_V6MP,
ARM_PERF_PMU_ID_CA8,
ARM_PERF_PMU_ID_CA9,
ARM_PERF_PMU_ID_CA5,
ARM_PERF_PMU_ID_CA15,
ARM_PERF_PMU_ID_CA7,
ARM_NUM_PMU_IDS,
};
extern enum arm_perf_pmu_ids
armpmu_get_pmu_id(void);
/* Nothing to see here... */
#endif /* __ARM_PERF_EVENT_H__ */
......@@ -103,10 +103,9 @@ struct pmu_hw_events {
struct arm_pmu {
struct pmu pmu;
enum arm_perf_pmu_ids id;
enum arm_pmu_type type;
cpumask_t active_irqs;
const char *name;
char *name;
irqreturn_t (*handle_irq)(int irq_num, void *dev);
void (*enable)(struct hw_perf_event *evt, int idx);
void (*disable)(struct hw_perf_event *evt, int idx);
......
......@@ -59,18 +59,13 @@ static inline void dsb_sev(void)
}
/*
* ARMv6 Spin-locking.
* ARMv6 ticket-based spin-locking.
*
* We exclusively read the old value. If it is zero, we may have
* won the lock, so we try exclusively storing it. A memory barrier
* is required after we get a lock, and before we release it, because
* V6 CPUs are assumed to have weakly ordered memory.
*
* Unlocked value: 0
* Locked value: 1
* A memory barrier is required after we get a lock, and before we
* release it, because V6 CPUs are assumed to have weakly ordered
* memory.
*/
#define arch_spin_is_locked(x) ((x)->lock != 0)
#define arch_spin_unlock_wait(lock) \
do { while (arch_spin_is_locked(lock)) cpu_relax(); } while (0)
......@@ -79,31 +74,39 @@ static inline void dsb_sev(void)
static inline void arch_spin_lock(arch_spinlock_t *lock)
{
unsigned long tmp;
u32 newval;
arch_spinlock_t lockval;
__asm__ __volatile__(
"1: ldrex %0, [%1]\n"
" teq %0, #0\n"
WFE("ne")
" strexeq %0, %2, [%1]\n"
" teqeq %0, #0\n"
"1: ldrex %0, [%3]\n"
" add %1, %0, %4\n"
" strex %2, %1, [%3]\n"
" teq %2, #0\n"
" bne 1b"
: "=&r" (tmp)
: "r" (&lock->lock), "r" (1)
: "=&r" (lockval), "=&r" (newval), "=&r" (tmp)
: "r" (&lock->slock), "I" (1 << TICKET_SHIFT)
: "cc");
while (lockval.tickets.next != lockval.tickets.owner) {
wfe();
lockval.tickets.owner = ACCESS_ONCE(lock->tickets.owner);
}
smp_mb();
}
static inline int arch_spin_trylock(arch_spinlock_t *lock)
{
unsigned long tmp;
u32 slock;
__asm__ __volatile__(
" ldrex %0, [%1]\n"
" teq %0, #0\n"
" strexeq %0, %2, [%1]"
: "=&r" (tmp)
: "r" (&lock->lock), "r" (1)
" ldrex %0, [%2]\n"
" subs %1, %0, %0, ror #16\n"
" addeq %0, %0, %3\n"
" strexeq %1, %0, [%2]"
: "=&r" (slock), "=&r" (tmp)
: "r" (&lock->slock), "I" (1 << TICKET_SHIFT)
: "cc");
if (tmp == 0) {
......@@ -116,17 +119,38 @@ static inline int arch_spin_trylock(arch_spinlock_t *lock)
static inline void arch_spin_unlock(arch_spinlock_t *lock)
{
unsigned long tmp;
u32 slock;
smp_mb();
__asm__ __volatile__(
" str %1, [%0]\n"
:
: "r" (&lock->lock), "r" (0)
" mov %1, #1\n"
"1: ldrex %0, [%2]\n"
" uadd16 %0, %0, %1\n"
" strex %1, %0, [%2]\n"
" teq %1, #0\n"
" bne 1b"
: "=&r" (slock), "=&r" (tmp)
: "r" (&lock->slock)
: "cc");
dsb_sev();
}
static inline int arch_spin_is_locked(arch_spinlock_t *lock)
{
struct __raw_tickets tickets = ACCESS_ONCE(lock->tickets);
return tickets.owner != tickets.next;
}
static inline int arch_spin_is_contended(arch_spinlock_t *lock)
{
struct __raw_tickets tickets = ACCESS_ONCE(lock->tickets);
return (tickets.next - tickets.owner) > 1;
}
#define arch_spin_is_contended arch_spin_is_contended
/*
* RWLOCKS
*
......@@ -158,7 +182,7 @@ static inline int arch_write_trylock(arch_rwlock_t *rw)
unsigned long tmp;
__asm__ __volatile__(
"1: ldrex %0, [%1]\n"
" ldrex %0, [%1]\n"
" teq %0, #0\n"
" strexeq %0, %2, [%1]"
: "=&r" (tmp)
......@@ -244,7 +268,7 @@ static inline int arch_read_trylock(arch_rwlock_t *rw)
unsigned long tmp, tmp2 = 1;
__asm__ __volatile__(
"1: ldrex %0, [%2]\n"
" ldrex %0, [%2]\n"
" adds %0, %0, #1\n"
" strexpl %1, %0, [%2]\n"
: "=&r" (tmp), "+r" (tmp2)
......
......@@ -5,11 +5,24 @@
# error "please don't include this file directly"
#endif
#define TICKET_SHIFT 16
typedef struct {
volatile unsigned int lock;
union {
u32 slock;
struct __raw_tickets {
#ifdef __ARMEB__
u16 next;
u16 owner;
#else
u16 owner;
u16 next;
#endif
} tickets;
};
} arch_spinlock_t;
#define __ARCH_SPIN_LOCK_UNLOCKED { 0 }
#define __ARCH_SPIN_LOCK_UNLOCKED { { 0 } }
typedef struct {
volatile unsigned int lock;
......
......@@ -12,13 +12,15 @@
#ifndef _ASMARM_TIMEX_H
#define _ASMARM_TIMEX_H
#include <asm/arch_timer.h>
#include <mach/timex.h>
typedef unsigned long cycles_t;
static inline cycles_t get_cycles (void)
{
return 0;
}
#ifdef ARCH_HAS_READ_CURRENT_TIMER
#define get_cycles() ({ cycles_t c; read_current_timer(&c) ? 0 : c; })
#else
#define get_cycles() (0)
#endif
#endif
......@@ -189,6 +189,9 @@ static inline void set_fs(mm_segment_t fs)
#define access_ok(type,addr,size) (__range_ok(addr,size) == 0)
#define user_addr_max() \
(segment_eq(get_fs(), USER_DS) ? TASK_SIZE : ~0UL)
/*
* The "__xxx" versions of the user access functions do not verify the
* address space - it must have been done previously with a separate
......@@ -398,9 +401,6 @@ extern unsigned long __must_check __clear_user_std(void __user *addr, unsigned l
#define __clear_user(addr,n) (memset((void __force *)addr, 0, n), 0)
#endif
extern unsigned long __must_check __strncpy_from_user(char *to, const char __user *from, unsigned long count);
extern unsigned long __must_check __strnlen_user(const char __user *s, long n);
static inline unsigned long __must_check copy_from_user(void *to, const void __user *from, unsigned long n)
{
if (access_ok(VERIFY_READ, from, n))
......@@ -427,24 +427,9 @@ static inline unsigned long __must_check clear_user(void __user *to, unsigned lo
return n;
}
static inline long __must_check strncpy_from_user(char *dst, const char __user *src, long count)
{
long res = -EFAULT;
if (access_ok(VERIFY_READ, src, 1))
res = __strncpy_from_user(dst, src, count);
return res;
}
#define strlen_user(s) strnlen_user(s, ~0UL >> 1)
extern long strncpy_from_user(char *dest, const char __user *src, long count);
static inline long __must_check strnlen_user(const char __user *s, long n)
{
unsigned long res = 0;
if (__addr_ok(s))
res = __strnlen_user(s, n);
return res;
}
extern __must_check long strlen_user(const char __user *str);
extern __must_check long strnlen_user(const char __user *str, long n);
#endif /* _ASMARM_UACCESS_H */
#ifndef __ASM_ARM_WORD_AT_A_TIME_H
#define __ASM_ARM_WORD_AT_A_TIME_H
#ifndef __ARMEB__
/*
* Little-endian word-at-a-time zero byte handling.
* Heavily based on the x86 algorithm.
*/
#include <linux/kernel.h>
struct word_at_a_time {
const unsigned long one_bits, high_bits;
};
#define WORD_AT_A_TIME_CONSTANTS { REPEAT_BYTE(0x01), REPEAT_BYTE(0x80) }
static inline unsigned long has_zero(unsigned long a, unsigned long *bits,
const struct word_at_a_time *c)
{
unsigned long mask = ((a - c->one_bits) & ~a) & c->high_bits;
*bits = mask;
return mask;
}
#define prep_zero_mask(a, bits, c) (bits)
static inline unsigned long create_zero_mask(unsigned long bits)
{
bits = (bits - 1) & ~bits;
return bits >> 7;
}
static inline unsigned long find_zero(unsigned long mask)
{
unsigned long ret;
#if __LINUX_ARM_ARCH__ >= 5
/* We have clz available. */
ret = fls(mask) >> 3;
#else
/* (000000 0000ff 00ffff ffffff) -> ( 1 1 2 3 ) */
ret = (0x0ff0001 + mask) >> 23;
/* Fix the 1 for 00 case */
ret &= mask;
#endif
return ret;
}
#ifdef CONFIG_DCACHE_WORD_ACCESS
#define zero_bytemask(mask) (mask)
/*
* Load an unaligned word from kernel space.
*
* In the (very unlikely) case of the word being a page-crosser
* and the next page not being mapped, take the exception and
* return zeroes in the non-existing part.
*/
static inline unsigned long load_unaligned_zeropad(const void *addr)
{
unsigned long ret, offset;
/* Load word from unaligned pointer addr */
asm(
"1: ldr %0, [%2]\n"
"2:\n"
" .pushsection .fixup,\"ax\"\n"
" .align 2\n"
"3: and %1, %2, #0x3\n"
" bic %2, %2, #0x3\n"
" ldr %0, [%2]\n"
" lsl %1, %1, #0x3\n"
" lsr %0, %0, %1\n"
" b 2b\n"
" .popsection\n"
" .pushsection __ex_table,\"a\"\n"
" .align 3\n"
" .long 1b, 3b\n"
" .popsection"
: "=&r" (ret), "=&r" (offset)
: "r" (addr), "Qo" (*(unsigned long *)addr));
return ret;
}
#endif /* DCACHE_WORD_ACCESS */
#else /* __ARMEB__ */
#include <asm-generic/word-at-a-time.h>
#endif
#endif /* __ASM_ARM_WORD_AT_A_TIME_H */
......@@ -32,6 +32,8 @@ static int arch_timer_ppi2;
static struct clock_event_device __percpu **arch_timer_evt;
extern void init_current_timer_delay(unsigned long freq);
/*
* Architected system timer support.
*/
......@@ -137,7 +139,7 @@ static int __cpuinit arch_timer_setup(struct clock_event_device *clk)
/* Be safe... */
arch_timer_disable();
clk->features = CLOCK_EVT_FEAT_ONESHOT;
clk->features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_C3STOP;
clk->name = "arch_sys_timer";
clk->rating = 450;
clk->set_mode = arch_timer_set_mode;
......@@ -223,6 +225,14 @@ static cycle_t arch_counter_read(struct clocksource *cs)
return arch_counter_get_cntpct();
}
int read_current_timer(unsigned long *timer_val)
{
if (!arch_timer_rate)
return -ENXIO;
*timer_val = arch_counter_get_cntpct();
return 0;
}
static struct clocksource clocksource_counter = {
.name = "arch_sys_counter",
.rating = 400,
......@@ -296,6 +306,7 @@ static int __init arch_timer_register(void)
if (err)
goto out_free_irq;
init_current_timer_delay(arch_timer_rate);
return 0;
out_free_irq:
......
......@@ -49,8 +49,7 @@ extern void __aeabi_ulcmp(void);
extern void fpundefinstr(void);
/* platform dependent support */
EXPORT_SYMBOL(__udelay);
EXPORT_SYMBOL(__const_udelay);
EXPORT_SYMBOL(arm_delay_ops);
/* networking */
EXPORT_SYMBOL(csum_partial);
......@@ -87,10 +86,6 @@ EXPORT_SYMBOL(memmove);
EXPORT_SYMBOL(memchr);
EXPORT_SYMBOL(__memzero);
/* user mem (segment) */
EXPORT_SYMBOL(__strnlen_user);
EXPORT_SYMBOL(__strncpy_from_user);
#ifdef CONFIG_MMU
EXPORT_SYMBOL(copy_page);
......
......@@ -95,13 +95,7 @@ ENDPROC(ret_to_user)
ENTRY(ret_from_fork)
bl schedule_tail
get_thread_info tsk
ldr r1, [tsk, #TI_FLAGS] @ check for syscall tracing
mov why, #1
tst r1, #_TIF_SYSCALL_WORK @ are we tracing syscalls?
beq ret_slow_syscall
mov r1, sp
mov r0, #1 @ trace exit [IP = 1]
bl syscall_trace
b ret_slow_syscall
ENDPROC(ret_from_fork)
......@@ -448,10 +442,9 @@ ENDPROC(vector_swi)
* context switches, and waiting for our parent to respond.
*/
__sys_trace:
mov r2, scno
add r1, sp, #S_OFF
mov r0, #0 @ trace entry [IP = 0]
bl syscall_trace
mov r1, scno
add r0, sp, #S_OFF
bl syscall_trace_enter
adr lr, BSYM(__sys_trace_return) @ return address
mov scno, r0 @ syscall number (possibly new)
......@@ -463,10 +456,9 @@ __sys_trace:
__sys_trace_return:
str r0, [sp, #S_R0 + S_OFF]! @ save returned r0
mov r2, scno
mov r1, sp
mov r0, #1 @ trace exit [IP = 1]
bl syscall_trace
mov r1, scno
mov r0, sp
bl syscall_trace_exit
b ret_slow_syscall
.align 5
......
......@@ -55,14 +55,6 @@
add \rd, \phys, #TEXT_OFFSET - PG_DIR_SIZE
.endm
#ifdef CONFIG_XIP_KERNEL
#define KERNEL_START XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
#define KERNEL_END _edata_loc
#else
#define KERNEL_START KERNEL_RAM_VADDR
#define KERNEL_END _end
#endif
/*
* Kernel startup entry point.
* ---------------------------
......@@ -218,51 +210,46 @@ __create_page_tables:
blo 1b
/*
* Now setup the pagetables for our kernel direct
* mapped region.
* Map our RAM from the start to the end of the kernel .bss section.
*/
mov r3, pc
mov r3, r3, lsr #SECTION_SHIFT
orr r3, r7, r3, lsl #SECTION_SHIFT
add r0, r4, #(KERNEL_START & 0xff000000) >> (SECTION_SHIFT - PMD_ORDER)
str r3, [r0, #((KERNEL_START & 0x00f00000) >> SECTION_SHIFT) << PMD_ORDER]!
ldr r6, =(KERNEL_END - 1)
add r0, r0, #1 << PMD_ORDER
add r0, r4, #PAGE_OFFSET >> (SECTION_SHIFT - PMD_ORDER)
ldr r6, =(_end - 1)
orr r3, r8, r7
add r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER)
1: cmp r0, r6
1: str r3, [r0], #1 << PMD_ORDER
add r3, r3, #1 << SECTION_SHIFT
strls r3, [r0], #1 << PMD_ORDER
cmp r0, r6
bls 1b
#ifdef CONFIG_XIP_KERNEL
/*
* Map some ram to cover our .data and .bss areas.
* Map the kernel image separately as it is not located in RAM.
*/
add r3, r8, #TEXT_OFFSET
orr r3, r3, r7
add r0, r4, #(KERNEL_RAM_VADDR & 0xff000000) >> (SECTION_SHIFT - PMD_ORDER)
str r3, [r0, #(KERNEL_RAM_VADDR & 0x00f00000) >> (SECTION_SHIFT - PMD_ORDER)]!
ldr r6, =(_end - 1)
add r0, r0, #4
#define XIP_START XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
mov r3, pc
mov r3, r3, lsr #SECTION_SHIFT
orr r3, r7, r3, lsl #SECTION_SHIFT
add r0, r4, #(XIP_START & 0xff000000) >> (SECTION_SHIFT - PMD_ORDER)
str r3, [r0, #((XIP_START & 0x00f00000) >> SECTION_SHIFT) << PMD_ORDER]!
ldr r6, =(_edata_loc - 1)
add r0, r0, #1 << PMD_ORDER
add r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER)
1: cmp r0, r6
add r3, r3, #1 << 20
strls r3, [r0], #4
add r3, r3, #1 << SECTION_SHIFT
strls r3, [r0], #1 << PMD_ORDER
bls 1b
#endif
/*
* Then map boot params address in r2 or the first 1MB (2MB with LPAE)
* of ram if boot params address is not specified.
* Then map boot params address in r2 if specified.
*/
mov r0, r2, lsr #SECTION_SHIFT
movs r0, r0, lsl #SECTION_SHIFT
moveq r0, r8
sub r3, r0, r8
add r3, r3, #PAGE_OFFSET
add r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER)
orr r6, r7, r0
str r6, [r3]
subne r3, r0, r8
addne r3, r3, #PAGE_OFFSET
addne r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER)
orrne r6, r7, r0
strne r6, [r3]
#ifdef CONFIG_DEBUG_LL
#if !defined(CONFIG_DEBUG_ICEDCC) && !defined(CONFIG_DEBUG_SEMIHOSTING)
......
......@@ -47,17 +47,14 @@ static DEFINE_PER_CPU(struct pmu_hw_events, cpu_hw_events);
/* Set at runtime when we know what CPU type we are. */
static struct arm_pmu *cpu_pmu;
enum arm_perf_pmu_ids
armpmu_get_pmu_id(void)
const char *perf_pmu_name(void)
{
int id = -ENODEV;
if (cpu_pmu != NULL)
id = cpu_pmu->id;
if (!cpu_pmu)
return NULL;
return id;
return cpu_pmu->pmu.name;
}
EXPORT_SYMBOL_GPL(armpmu_get_pmu_id);
EXPORT_SYMBOL_GPL(perf_pmu_name);
int perf_num_counters(void)
{
......@@ -760,7 +757,7 @@ init_hw_perf_events(void)
cpu_pmu->name, cpu_pmu->num_events);
cpu_pmu_init(cpu_pmu);
register_cpu_notifier(&pmu_cpu_notifier);
armpmu_register(cpu_pmu, "cpu", PERF_TYPE_RAW);
armpmu_register(cpu_pmu, cpu_pmu->name, PERF_TYPE_RAW);
} else {
pr_info("no hardware support available\n");
}
......
......@@ -650,7 +650,6 @@ static int armv6_map_event(struct perf_event *event)
}
static struct arm_pmu armv6pmu = {
.id = ARM_PERF_PMU_ID_V6,
.name = "v6",
.handle_irq = armv6pmu_handle_irq,
.enable = armv6pmu_enable_event,
......@@ -685,7 +684,6 @@ static int armv6mpcore_map_event(struct perf_event *event)
}
static struct arm_pmu armv6mpcore_pmu = {
.id = ARM_PERF_PMU_ID_V6MP,
.name = "v6mpcore",
.handle_irq = armv6pmu_handle_irq,
.enable = armv6pmu_enable_event,
......
......@@ -1258,7 +1258,6 @@ static u32 __init armv7_read_num_pmnc_events(void)
static struct arm_pmu *__init armv7_a8_pmu_init(void)
{
armv7pmu.id = ARM_PERF_PMU_ID_CA8;
armv7pmu.name = "ARMv7 Cortex-A8";
armv7pmu.map_event = armv7_a8_map_event;
armv7pmu.num_events = armv7_read_num_pmnc_events();
......@@ -1267,7 +1266,6 @@ static struct arm_pmu *__init armv7_a8_pmu_init(void)
static struct arm_pmu *__init armv7_a9_pmu_init(void)
{
armv7pmu.id = ARM_PERF_PMU_ID_CA9;
armv7pmu.name = "ARMv7 Cortex-A9";
armv7pmu.map_event = armv7_a9_map_event;
armv7pmu.num_events = armv7_read_num_pmnc_events();
......@@ -1276,7 +1274,6 @@ static struct arm_pmu *__init armv7_a9_pmu_init(void)
static struct arm_pmu *__init armv7_a5_pmu_init(void)
{
armv7pmu.id = ARM_PERF_PMU_ID_CA5;
armv7pmu.name = "ARMv7 Cortex-A5";
armv7pmu.map_event = armv7_a5_map_event;
armv7pmu.num_events = armv7_read_num_pmnc_events();
......@@ -1285,7 +1282,6 @@ static struct arm_pmu *__init armv7_a5_pmu_init(void)
static struct arm_pmu *__init armv7_a15_pmu_init(void)
{
armv7pmu.id = ARM_PERF_PMU_ID_CA15;
armv7pmu.name = "ARMv7 Cortex-A15";
armv7pmu.map_event = armv7_a15_map_event;
armv7pmu.num_events = armv7_read_num_pmnc_events();
......@@ -1295,7 +1291,6 @@ static struct arm_pmu *__init armv7_a15_pmu_init(void)
static struct arm_pmu *__init armv7_a7_pmu_init(void)
{
armv7pmu.id = ARM_PERF_PMU_ID_CA7;
armv7pmu.name = "ARMv7 Cortex-A7";
armv7pmu.map_event = armv7_a7_map_event;
armv7pmu.num_events = armv7_read_num_pmnc_events();
......
......@@ -435,7 +435,6 @@ static int xscale_map_event(struct perf_event *event)
}
static struct arm_pmu xscale1pmu = {
.id = ARM_PERF_PMU_ID_XSCALE1,
.name = "xscale1",
.handle_irq = xscale1pmu_handle_irq,
.enable = xscale1pmu_enable_event,
......@@ -803,7 +802,6 @@ xscale2pmu_write_counter(int counter, u32 val)
}
static struct arm_pmu xscale2pmu = {
.id = ARM_PERF_PMU_ID_XSCALE2,
.name = "xscale2",
.handle_irq = xscale2pmu_handle_irq,
.enable = xscale2pmu_enable_event,
......
......@@ -907,16 +907,16 @@ long arch_ptrace(struct task_struct *child, long request,
return ret;
}
asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
enum ptrace_syscall_dir {
PTRACE_SYSCALL_ENTER = 0,
PTRACE_SYSCALL_EXIT,
};
static int ptrace_syscall_trace(struct pt_regs *regs, int scno,
enum ptrace_syscall_dir dir)
{
unsigned long ip;
if (why)
audit_syscall_exit(regs);
else
audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0,
regs->ARM_r1, regs->ARM_r2, regs->ARM_r3);
if (!test_thread_flag(TIF_SYSCALL_TRACE))
return scno;
......@@ -927,14 +927,28 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
* IP = 0 -> entry, =1 -> exit
*/
ip = regs->ARM_ip;
regs->ARM_ip = why;
regs->ARM_ip = dir;
if (why)
if (dir == PTRACE_SYSCALL_EXIT)
tracehook_report_syscall_exit(regs, 0);
else if (tracehook_report_syscall_entry(regs))
current_thread_info()->syscall = -1;
regs->ARM_ip = ip;
return current_thread_info()->syscall;
}
asmlinkage int syscall_trace_enter(struct pt_regs *regs, int scno)
{
int ret = ptrace_syscall_trace(regs, scno, PTRACE_SYSCALL_ENTER);
audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0, regs->ARM_r1,
regs->ARM_r2, regs->ARM_r3);
return ret;
}
asmlinkage int syscall_trace_exit(struct pt_regs *regs, int scno)
{
int ret = ptrace_syscall_trace(regs, scno, PTRACE_SYSCALL_EXIT);
audit_syscall_exit(regs);
return ret;
}
......@@ -179,7 +179,7 @@ void __ref cpu_die(void)
mb();
/* Tell __cpu_die() that this CPU is now safe to dispose of */
complete(&cpu_died);
RCU_NONIDLE(complete(&cpu_died));
/*
* actual CPU shutdown procedure is at least platform (if not
......
......@@ -17,11 +17,190 @@
#include <linux/percpu.h>
#include <linux/node.h>
#include <linux/nodemask.h>
#include <linux/of.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <asm/cputype.h>
#include <asm/topology.h>
/*
* cpu power scale management
*/
/*
* cpu power table
* This per cpu data structure describes the relative capacity of each core.
* On a heteregenous system, cores don't have the same computation capacity
* and we reflect that difference in the cpu_power field so the scheduler can
* take this difference into account during load balance. A per cpu structure
* is preferred because each CPU updates its own cpu_power field during the
* load balance except for idle cores. One idle core is selected to run the
* rebalance_domains for all idle cores and the cpu_power can be updated
* during this sequence.
*/
static DEFINE_PER_CPU(unsigned long, cpu_scale);
unsigned long arch_scale_freq_power(struct sched_domain *sd, int cpu)
{
return per_cpu(cpu_scale, cpu);
}
static void set_power_scale(unsigned int cpu, unsigned long power)
{
per_cpu(cpu_scale, cpu) = power;
}
#ifdef CONFIG_OF
struct cpu_efficiency {
const char *compatible;
unsigned long efficiency;
};
/*
* Table of relative efficiency of each processors
* The efficiency value must fit in 20bit and the final
* cpu_scale value must be in the range
* 0 < cpu_scale < 3*SCHED_POWER_SCALE/2
* in order to return at most 1 when DIV_ROUND_CLOSEST
* is used to compute the capacity of a CPU.
* Processors that are not defined in the table,
* use the default SCHED_POWER_SCALE value for cpu_scale.
*/
struct cpu_efficiency table_efficiency[] = {
{"arm,cortex-a15", 3891},
{"arm,cortex-a7", 2048},
{NULL, },
};
struct cpu_capacity {
unsigned long hwid;
unsigned long capacity;
};
struct cpu_capacity *cpu_capacity;
unsigned long middle_capacity = 1;
/*
* Iterate all CPUs' descriptor in DT and compute the efficiency
* (as per table_efficiency). Also calculate a middle efficiency
* as close as possible to (max{eff_i} - min{eff_i}) / 2
* This is later used to scale the cpu_power field such that an
* 'average' CPU is of middle power. Also see the comments near
* table_efficiency[] and update_cpu_power().
*/
static void __init parse_dt_topology(void)
{
struct cpu_efficiency *cpu_eff;
struct device_node *cn = NULL;
unsigned long min_capacity = (unsigned long)(-1);
unsigned long max_capacity = 0;
unsigned long capacity = 0;
int alloc_size, cpu = 0;
alloc_size = nr_cpu_ids * sizeof(struct cpu_capacity);
cpu_capacity = (struct cpu_capacity *)kzalloc(alloc_size, GFP_NOWAIT);
while ((cn = of_find_node_by_type(cn, "cpu"))) {
const u32 *rate, *reg;
int len;
if (cpu >= num_possible_cpus())
break;
for (cpu_eff = table_efficiency; cpu_eff->compatible; cpu_eff++)
if (of_device_is_compatible(cn, cpu_eff->compatible))
break;
if (cpu_eff->compatible == NULL)
continue;
rate = of_get_property(cn, "clock-frequency", &len);
if (!rate || len != 4) {
pr_err("%s missing clock-frequency property\n",
cn->full_name);
continue;
}
reg = of_get_property(cn, "reg", &len);
if (!reg || len != 4) {
pr_err("%s missing reg property\n", cn->full_name);
continue;
}
capacity = ((be32_to_cpup(rate)) >> 20) * cpu_eff->efficiency;
/* Save min capacity of the system */
if (capacity < min_capacity)
min_capacity = capacity;
/* Save max capacity of the system */
if (capacity > max_capacity)
max_capacity = capacity;
cpu_capacity[cpu].capacity = capacity;
cpu_capacity[cpu++].hwid = be32_to_cpup(reg);
}
if (cpu < num_possible_cpus())
cpu_capacity[cpu].hwid = (unsigned long)(-1);
/* If min and max capacities are equals, we bypass the update of the
* cpu_scale because all CPUs have the same capacity. Otherwise, we
* compute a middle_capacity factor that will ensure that the capacity
* of an 'average' CPU of the system will be as close as possible to
* SCHED_POWER_SCALE, which is the default value, but with the
* constraint explained near table_efficiency[].
*/
if (min_capacity == max_capacity)
cpu_capacity[0].hwid = (unsigned long)(-1);
else if (4*max_capacity < (3*(max_capacity + min_capacity)))
middle_capacity = (min_capacity + max_capacity)
>> (SCHED_POWER_SHIFT+1);
else
middle_capacity = ((max_capacity / 3)
>> (SCHED_POWER_SHIFT-1)) + 1;
}
/*
* Look for a customed capacity of a CPU in the cpu_capacity table during the
* boot. The update of all CPUs is in O(n^2) for heteregeneous system but the
* function returns directly for SMP system.
*/
void update_cpu_power(unsigned int cpu, unsigned long hwid)
{
unsigned int idx = 0;
/* look for the cpu's hwid in the cpu capacity table */
for (idx = 0; idx < num_possible_cpus(); idx++) {
if (cpu_capacity[idx].hwid == hwid)
break;
if (cpu_capacity[idx].hwid == -1)
return;
}
if (idx == num_possible_cpus())
return;
set_power_scale(cpu, cpu_capacity[idx].capacity / middle_capacity);
printk(KERN_INFO "CPU%u: update cpu_power %lu\n",
cpu, arch_scale_freq_power(NULL, cpu));
}
#else
static inline void parse_dt_topology(void) {}
static inline void update_cpu_power(unsigned int cpuid, unsigned int mpidr) {}
#endif
/*
* cpu topology management
*/
#define MPIDR_SMP_BITMASK (0x3 << 30)
#define MPIDR_SMP_VALUE (0x2 << 30)
......@@ -31,6 +210,7 @@
* These masks reflect the current use of the affinity levels.
* The affinity level can be up to 16 bits according to ARM ARM
*/
#define MPIDR_HWID_BITMASK 0xFFFFFF
#define MPIDR_LEVEL0_MASK 0x3
#define MPIDR_LEVEL0_SHIFT 0
......@@ -41,6 +221,9 @@
#define MPIDR_LEVEL2_MASK 0xFF
#define MPIDR_LEVEL2_SHIFT 16
/*
* cpu topology table
*/
struct cputopo_arm cpu_topology[NR_CPUS];
const struct cpumask *cpu_coregroup_mask(int cpu)
......@@ -48,6 +231,32 @@ const struct cpumask *cpu_coregroup_mask(int cpu)
return &cpu_topology[cpu].core_sibling;
}
void update_siblings_masks(unsigned int cpuid)
{
struct cputopo_arm *cpu_topo, *cpuid_topo = &cpu_topology[cpuid];
int cpu;
/* update core and thread sibling masks */
for_each_possible_cpu(cpu) {
cpu_topo = &cpu_topology[cpu];
if (cpuid_topo->socket_id != cpu_topo->socket_id)
continue;
cpumask_set_cpu(cpuid, &cpu_topo->core_sibling);
if (cpu != cpuid)
cpumask_set_cpu(cpu, &cpuid_topo->core_sibling);
if (cpuid_topo->core_id != cpu_topo->core_id)
continue;
cpumask_set_cpu(cpuid, &cpu_topo->thread_sibling);
if (cpu != cpuid)
cpumask_set_cpu(cpu, &cpuid_topo->thread_sibling);
}
smp_wmb();
}
/*
* store_cpu_topology is called at boot when only one cpu is running
* and with the mutex cpu_hotplug.lock locked, when several cpus have booted,
......@@ -57,7 +266,6 @@ void store_cpu_topology(unsigned int cpuid)
{
struct cputopo_arm *cpuid_topo = &cpu_topology[cpuid];
unsigned int mpidr;
unsigned int cpu;
/* If the cpu topology has been already set, just return */
if (cpuid_topo->core_id != -1)
......@@ -99,26 +307,9 @@ void store_cpu_topology(unsigned int cpuid)
cpuid_topo->socket_id = -1;
}
/* update core and thread sibling masks */
for_each_possible_cpu(cpu) {
struct cputopo_arm *cpu_topo = &cpu_topology[cpu];
if (cpuid_topo->socket_id == cpu_topo->socket_id) {
cpumask_set_cpu(cpuid, &cpu_topo->core_sibling);
if (cpu != cpuid)
cpumask_set_cpu(cpu,
&cpuid_topo->core_sibling);
if (cpuid_topo->core_id == cpu_topo->core_id) {
cpumask_set_cpu(cpuid,
&cpu_topo->thread_sibling);
if (cpu != cpuid)
cpumask_set_cpu(cpu,
&cpuid_topo->thread_sibling);
}
}
}
smp_wmb();
update_siblings_masks(cpuid);
update_cpu_power(cpuid, mpidr & MPIDR_HWID_BITMASK);
printk(KERN_INFO "CPU%u: thread %d, cpu %d, socket %d, mpidr %x\n",
cpuid, cpu_topology[cpuid].thread_id,
......@@ -134,7 +325,7 @@ void init_cpu_topology(void)
{
unsigned int cpu;
/* init core mask */
/* init core mask and power*/
for_each_possible_cpu(cpu) {
struct cputopo_arm *cpu_topo = &(cpu_topology[cpu]);
......@@ -143,6 +334,10 @@ void init_cpu_topology(void)
cpu_topo->socket_id = -1;
cpumask_clear(&cpu_topo->core_sibling);
cpumask_clear(&cpu_topo->thread_sibling);
set_power_scale(cpu, SCHED_POWER_SCALE);
}
smp_wmb();
parse_dt_topology();
}
......@@ -233,9 +233,9 @@ void show_stack(struct task_struct *tsk, unsigned long *sp)
#define S_ISA " ARM"
#endif
static int __die(const char *str, int err, struct thread_info *thread, struct pt_regs *regs)
static int __die(const char *str, int err, struct pt_regs *regs)
{
struct task_struct *tsk = thread->task;
struct task_struct *tsk = current;
static int die_counter;
int ret;
......@@ -245,12 +245,12 @@ static int __die(const char *str, int err, struct thread_info *thread, struct pt
/* trap and error numbers are mostly meaningless on ARM */
ret = notify_die(DIE_OOPS, str, regs, err, tsk->thread.trap_no, SIGSEGV);
if (ret == NOTIFY_STOP)
return ret;
return 1;
print_modules();
__show_regs(regs);
printk(KERN_EMERG "Process %.*s (pid: %d, stack limit = 0x%p)\n",
TASK_COMM_LEN, tsk->comm, task_pid_nr(tsk), thread + 1);
TASK_COMM_LEN, tsk->comm, task_pid_nr(tsk), end_of_stack(tsk));
if (!user_mode(regs) || in_interrupt()) {
dump_mem(KERN_EMERG, "Stack: ", regs->ARM_sp,
......@@ -259,45 +259,77 @@ static int __die(const char *str, int err, struct thread_info *thread, struct pt
dump_instr(KERN_EMERG, regs);
}
return ret;
return 0;
}
static DEFINE_RAW_SPINLOCK(die_lock);
static arch_spinlock_t die_lock = __ARCH_SPIN_LOCK_UNLOCKED;
static int die_owner = -1;
static unsigned int die_nest_count;
/*
* This function is protected against re-entrancy.
*/
void die(const char *str, struct pt_regs *regs, int err)
static unsigned long oops_begin(void)
{
struct thread_info *thread = current_thread_info();
int ret;
enum bug_trap_type bug_type = BUG_TRAP_TYPE_NONE;
int cpu;
unsigned long flags;
oops_enter();
raw_spin_lock_irq(&die_lock);
/* racy, but better than risking deadlock. */
raw_local_irq_save(flags);
cpu = smp_processor_id();
if (!arch_spin_trylock(&die_lock)) {
if (cpu == die_owner)
/* nested oops. should stop eventually */;
else
arch_spin_lock(&die_lock);
}
die_nest_count++;
die_owner = cpu;
console_verbose();
bust_spinlocks(1);
if (!user_mode(regs))
bug_type = report_bug(regs->ARM_pc, regs);
if (bug_type != BUG_TRAP_TYPE_NONE)
str = "Oops - BUG";
ret = __die(str, err, thread, regs);
return flags;
}
if (regs && kexec_should_crash(thread->task))
static void oops_end(unsigned long flags, struct pt_regs *regs, int signr)
{
if (regs && kexec_should_crash(current))
crash_kexec(regs);
bust_spinlocks(0);
die_owner = -1;
add_taint(TAINT_DIE);
raw_spin_unlock_irq(&die_lock);
die_nest_count--;
if (!die_nest_count)
/* Nest count reaches zero, release the lock. */
arch_spin_unlock(&die_lock);
raw_local_irq_restore(flags);
oops_exit();
if (in_interrupt())
panic("Fatal exception in interrupt");
if (panic_on_oops)
panic("Fatal exception");
if (ret != NOTIFY_STOP)
do_exit(SIGSEGV);
if (signr)
do_exit(signr);
}
/*
* This function is protected against re-entrancy.
*/
void die(const char *str, struct pt_regs *regs, int err)
{
enum bug_trap_type bug_type = BUG_TRAP_TYPE_NONE;
unsigned long flags = oops_begin();
int sig = SIGSEGV;
if (!user_mode(regs))
bug_type = report_bug(regs->ARM_pc, regs);
if (bug_type != BUG_TRAP_TYPE_NONE)
str = "Oops - BUG";
if (__die(str, err, regs))
sig = 0;
oops_end(flags, regs, sig);
}
void arm_notify_die(const char *str, struct pt_regs *regs,
......
......@@ -6,9 +6,8 @@
lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \
csumpartialcopy.o csumpartialcopyuser.o clearbit.o \
delay.o findbit.o memchr.o memcpy.o \
delay.o delay-loop.o findbit.o memchr.o memcpy.o \
memmove.o memset.o memzero.o setbit.o \
strncpy_from_user.o strnlen_user.o \
strchr.o strrchr.o \
testchangebit.o testclearbit.o testsetbit.o \
ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \
......
......@@ -9,11 +9,11 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/param.h>
#include <asm/delay.h>
.text
.LC0: .word loops_per_jiffy
.LC1: .word (2199023*HZ)>>11
.LC1: .word UDELAY_MULT
/*
* r0 <= 2000
......@@ -21,10 +21,10 @@
* HZ <= 1000
*/
ENTRY(__udelay)
ENTRY(__loop_udelay)
ldr r2, .LC1
mul r0, r2, r0
ENTRY(__const_udelay) @ 0 <= r0 <= 0x7fffff06
ENTRY(__loop_const_udelay) @ 0 <= r0 <= 0x7fffff06
mov r1, #-1
ldr r2, .LC0
ldr r2, [r2] @ max = 0x01ffffff
......@@ -39,12 +39,10 @@ ENTRY(__const_udelay) @ 0 <= r0 <= 0x7fffff06
/*
* loops = r0 * HZ * loops_per_jiffy / 1000000
*
* Oh, if only we had a cycle counter...
*/
@ Delay routine
ENTRY(__delay)
ENTRY(__loop_delay)
subs r0, r0, #1
#if 0
movls pc, lr
......@@ -62,8 +60,8 @@ ENTRY(__delay)
movls pc, lr
subs r0, r0, #1
#endif
bhi __delay
bhi __loop_delay
mov pc, lr
ENDPROC(__udelay)
ENDPROC(__const_udelay)
ENDPROC(__delay)
ENDPROC(__loop_udelay)
ENDPROC(__loop_const_udelay)
ENDPROC(__loop_delay)
/*
* Delay loops based on the OpenRISC implementation.
*
* Copyright (C) 2012 ARM Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* Author: Will Deacon <will.deacon@arm.com>
*/
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/timex.h>
/*
* Default to the loop-based delay implementation.
*/
struct arm_delay_ops arm_delay_ops = {
.delay = __loop_delay,
.const_udelay = __loop_const_udelay,
.udelay = __loop_udelay,
};
#ifdef ARCH_HAS_READ_CURRENT_TIMER
static void __timer_delay(unsigned long cycles)
{
cycles_t start = get_cycles();
while ((get_cycles() - start) < cycles)
cpu_relax();
}
static void __timer_const_udelay(unsigned long xloops)
{
unsigned long long loops = xloops;
loops *= loops_per_jiffy;
__timer_delay(loops >> UDELAY_SHIFT);
}
static void __timer_udelay(unsigned long usecs)
{
__timer_const_udelay(usecs * UDELAY_MULT);
}
void __init init_current_timer_delay(unsigned long freq)
{
pr_info("Switching to timer-based delay loop\n");
lpj_fine = freq / HZ;
arm_delay_ops.delay = __timer_delay;
arm_delay_ops.const_udelay = __timer_const_udelay;
arm_delay_ops.udelay = __timer_udelay;
}
unsigned long __cpuinit calibrate_delay_is_known(void)
{
return lpj_fine;
}
#endif
/*
* linux/arch/arm/lib/strncpy_from_user.S
*
* Copyright (C) 1995-2000 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/errno.h>
.text
.align 5
/*
* Copy a string from user space to kernel space.
* r0 = dst, r1 = src, r2 = byte length
* returns the number of characters copied (strlen of copied string),
* -EFAULT on exception, or "len" if we fill the whole buffer
*/
ENTRY(__strncpy_from_user)
mov ip, r1
1: subs r2, r2, #1
ldrusr r3, r1, 1, pl
bmi 2f
strb r3, [r0], #1
teq r3, #0
bne 1b
sub r1, r1, #1 @ take NUL character out of count
2: sub r0, r1, ip
mov pc, lr
ENDPROC(__strncpy_from_user)
.pushsection .fixup,"ax"
.align 0
9001: mov r3, #0
strb r3, [r0, #0] @ null terminate
mov r0, #-EFAULT
mov pc, lr
.popsection
/*
* linux/arch/arm/lib/strnlen_user.S
*
* Copyright (C) 1995-2000 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/errno.h>
.text
.align 5
/* Prototype: unsigned long __strnlen_user(const char *str, long n)
* Purpose : get length of a string in user memory
* Params : str - address of string in user memory
* Returns : length of string *including terminator*
* or zero on exception, or n + 1 if too long
*/
ENTRY(__strnlen_user)
mov r2, r0
1:
ldrusr r3, r0, 1
teq r3, #0
beq 2f
subs r1, r1, #1
bne 1b
add r0, r0, #1
2: sub r0, r0, r2
mov pc, lr
ENDPROC(__strnlen_user)
.pushsection .fixup,"ax"
.align 0
9001: mov r0, #0
mov pc, lr
.popsection
......@@ -127,7 +127,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
* the boot monitor to read the system wide flags register,
* and branch to the address found there.
*/
gic_raise_softirq(cpumask_of(cpu), 1);
gic_raise_softirq(cpumask_of(cpu), 0);
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {
......
......@@ -125,7 +125,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
booted = true;
}
gic_raise_softirq(cpumask_of(cpu), 1);
gic_raise_softirq(cpumask_of(cpu), 0);
/*
* Now the secondary core is starting up let it run its
......
......@@ -7,17 +7,17 @@
* OS Timer & Match Registers
*/
#define OSMR0 __REG(0x40A00000) /* */
#define OSMR1 __REG(0x40A00004) /* */
#define OSMR2 __REG(0x40A00008) /* */
#define OSMR3 __REG(0x40A0000C) /* */
#define OSMR4 __REG(0x40A00080) /* */
#define OSCR __REG(0x40A00010) /* OS Timer Counter Register */
#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */
#define OMCR4 __REG(0x40A000C0) /* */
#define OSSR __REG(0x40A00014) /* OS Timer Status Register */
#define OWER __REG(0x40A00018) /* OS Timer Watchdog Enable Register */
#define OIER __REG(0x40A0001C) /* OS Timer Interrupt Enable Register */
#define OSMR0 io_p2v(0x40A00000) /* */
#define OSMR1 io_p2v(0x40A00004) /* */
#define OSMR2 io_p2v(0x40A00008) /* */
#define OSMR3 io_p2v(0x40A0000C) /* */
#define OSMR4 io_p2v(0x40A00080) /* */
#define OSCR io_p2v(0x40A00010) /* OS Timer Counter Register */
#define OSCR4 io_p2v(0x40A00040) /* OS Timer Counter Register */
#define OMCR4 io_p2v(0x40A000C0) /* */
#define OSSR io_p2v(0x40A00014) /* OS Timer Status Register */
#define OWER io_p2v(0x40A00018) /* OS Timer Watchdog Enable Register */
#define OIER io_p2v(0x40A0001C) /* OS Timer Interrupt Enable Register */
#define OSSR_M3 (1 << 3) /* Match status channel 3 */
#define OSSR_M2 (1 << 2) /* Match status channel 2 */
......
......@@ -77,9 +77,10 @@ static void do_gpio_reset(void)
static void do_hw_reset(void)
{
/* Initialize the watchdog and let it fire */
OWER = OWER_WME;
OSSR = OSSR_M3;
OSMR3 = OSCR + 368640; /* ... in 100 ms */
writel_relaxed(OWER_WME, OWER);
writel_relaxed(OSSR_M3, OSSR);
/* ... in 100 ms */
writel_relaxed(readl_relaxed(OSCR) + 368640, OSMR3);
}
void pxa_restart(char mode, const char *cmd)
......
......@@ -35,7 +35,7 @@
static u32 notrace pxa_read_sched_clock(void)
{
return OSCR;
return readl_relaxed(OSCR);
}
......@@ -47,8 +47,8 @@ pxa_ost0_interrupt(int irq, void *dev_id)
struct clock_event_device *c = dev_id;
/* Disarm the compare/match, signal the event. */
OIER &= ~OIER_E0;
OSSR = OSSR_M0;
writel_relaxed(readl_relaxed(OIER) & ~OIER_E0, OIER);
writel_relaxed(OSSR_M0, OSSR);
c->event_handler(c);
return IRQ_HANDLED;
......@@ -59,10 +59,10 @@ pxa_osmr0_set_next_event(unsigned long delta, struct clock_event_device *dev)
{
unsigned long next, oscr;
OIER |= OIER_E0;
next = OSCR + delta;
OSMR0 = next;
oscr = OSCR;
writel_relaxed(readl_relaxed(OIER) | OIER_E0, OIER);
next = readl_relaxed(OSCR) + delta;
writel_relaxed(next, OSMR0);
oscr = readl_relaxed(OSCR);
return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0;
}
......@@ -72,15 +72,15 @@ pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev)
{
switch (mode) {
case CLOCK_EVT_MODE_ONESHOT:
OIER &= ~OIER_E0;
OSSR = OSSR_M0;
writel_relaxed(readl_relaxed(OIER) & ~OIER_E0, OIER);
writel_relaxed(OSSR_M0, OSSR);
break;
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_SHUTDOWN:
/* initializing, released, or preparing for suspend */
OIER &= ~OIER_E0;
OSSR = OSSR_M0;
writel_relaxed(readl_relaxed(OIER) & ~OIER_E0, OIER);
writel_relaxed(OSSR_M0, OSSR);
break;
case CLOCK_EVT_MODE_RESUME:
......@@ -108,8 +108,8 @@ static void __init pxa_timer_init(void)
{
unsigned long clock_tick_rate = get_clock_tick_rate();
OIER = 0;
OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3;
writel_relaxed(0, OIER);
writel_relaxed(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR);
setup_sched_clock(pxa_read_sched_clock, 32, clock_tick_rate);
......@@ -122,7 +122,7 @@ static void __init pxa_timer_init(void)
setup_irq(IRQ_OST0, &pxa_ost0_irq);
clocksource_mmio_init(&OSCR, "oscr0", clock_tick_rate, 200, 32,
clocksource_mmio_init(OSCR, "oscr0", clock_tick_rate, 200, 32,
clocksource_mmio_readl_up);
clockevents_register_device(&ckevt_pxa_osmr0);
}
......@@ -132,12 +132,12 @@ static unsigned long osmr[4], oier, oscr;
static void pxa_timer_suspend(void)
{
osmr[0] = OSMR0;
osmr[1] = OSMR1;
osmr[2] = OSMR2;
osmr[3] = OSMR3;
oier = OIER;
oscr = OSCR;
osmr[0] = readl_relaxed(OSMR0);
osmr[1] = readl_relaxed(OSMR1);
osmr[2] = readl_relaxed(OSMR2);
osmr[3] = readl_relaxed(OSMR3);
oier = readl_relaxed(OIER);
oscr = readl_relaxed(OSCR);
}
static void pxa_timer_resume(void)
......@@ -151,12 +151,12 @@ static void pxa_timer_resume(void)
if (osmr[0] - oscr < MIN_OSCR_DELTA)
osmr[0] += MIN_OSCR_DELTA;
OSMR0 = osmr[0];
OSMR1 = osmr[1];
OSMR2 = osmr[2];
OSMR3 = osmr[3];
OIER = oier;
OSCR = oscr;
writel_relaxed(osmr[0], OSMR0);
writel_relaxed(osmr[1], OSMR1);
writel_relaxed(osmr[2], OSMR2);
writel_relaxed(osmr[3], OSMR3);
writel_relaxed(oier, OIER);
writel_relaxed(oscr, OSCR);
}
#else
#define pxa_timer_suspend NULL
......
......@@ -362,7 +362,7 @@ static void __init assabet_init(void)
static void __init map_sa1100_gpio_regs( void )
{
unsigned long phys = __PREG(GPLR) & PMD_MASK;
unsigned long virt = io_p2v(phys);
unsigned long virt = (unsigned long)io_p2v(phys);
int prot = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_DOMAIN(DOMAIN_IO);
pmd_t *pmd;
......
......@@ -87,6 +87,7 @@
#include <linux/types.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
#include <linux/io.h>
#include <asm/cputype.h>
......
......@@ -19,6 +19,7 @@
#include <linux/cpufreq.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/moduleparam.h>
#include <linux/types.h>
......
......@@ -830,14 +830,14 @@
* (read/write).
*/
#define OSMR0 __REG(0x90000000) /* OS timer Match Reg. 0 */
#define OSMR1 __REG(0x90000004) /* OS timer Match Reg. 1 */
#define OSMR2 __REG(0x90000008) /* OS timer Match Reg. 2 */
#define OSMR3 __REG(0x9000000c) /* OS timer Match Reg. 3 */
#define OSCR __REG(0x90000010) /* OS timer Counter Reg. */
#define OSSR __REG(0x90000014 ) /* OS timer Status Reg. */
#define OWER __REG(0x90000018 ) /* OS timer Watch-dog Enable Reg. */
#define OIER __REG(0x9000001C ) /* OS timer Interrupt Enable Reg. */
#define OSMR0 io_p2v(0x90000000) /* OS timer Match Reg. 0 */
#define OSMR1 io_p2v(0x90000004) /* OS timer Match Reg. 1 */
#define OSMR2 io_p2v(0x90000008) /* OS timer Match Reg. 2 */
#define OSMR3 io_p2v(0x9000000c) /* OS timer Match Reg. 3 */
#define OSCR io_p2v(0x90000010) /* OS timer Counter Reg. */
#define OSSR io_p2v(0x90000014) /* OS timer Status Reg. */
#define OWER io_p2v(0x90000018) /* OS timer Watch-dog Enable Reg. */
#define OIER io_p2v(0x9000001C) /* OS timer Interrupt Enable Reg. */
#define OSSR_M(Nb) /* Match detected [0..3] */ \
(0x00000001 << (Nb))
......
......@@ -24,6 +24,7 @@
#ifndef __ASM_ARCH_SA1100_GPIO_H
#define __ASM_ARCH_SA1100_GPIO_H
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm-generic/gpio.h>
......
......@@ -32,7 +32,7 @@
#define PIO_START 0x80000000 /* physical start of IO space */
#define io_p2v( x ) \
( (((x)&0x00ffffff) | (((x)&0x30000000)>>VIO_SHIFT)) + VIO_BASE )
IOMEM( (((x)&0x00ffffff) | (((x)&0x30000000)>>VIO_SHIFT)) + VIO_BASE )
#define io_v2p( x ) \
( (((x)&0x00ffffff) | (((x)&(0x30000000>>VIO_SHIFT))<<VIO_SHIFT)) + PIO_START )
......@@ -47,6 +47,8 @@
#define CPU_SA1110_ID (0x6901b110)
#define CPU_SA1110_MASK (0xfffffff0)
#define __MREG(x) IOMEM(io_p2v(x))
#ifndef __ASSEMBLY__
#include <asm/cputype.h>
......@@ -56,7 +58,7 @@
#define cpu_is_sa1100() ((read_cpuid_id() & CPU_SA1100_MASK) == CPU_SA1100_ID)
#define cpu_is_sa1110() ((read_cpuid_id() & CPU_SA1110_MASK) == CPU_SA1110_ID)
# define __REG(x) (*((volatile unsigned long *)io_p2v(x)))
# define __REG(x) (*((volatile unsigned long __iomem *)io_p2v(x)))
# define __PREG(x) (io_v2p((unsigned long)&(x)))
static inline unsigned long get_clock_tick_rate(void)
......
......@@ -8,6 +8,8 @@
#include "hardware.h"
#define IOMEM(x) (x)
/*
* The following code assumes the serial port has already been
* initialized by the bootloader. We search for the first enabled
......
......@@ -12,6 +12,7 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/ioport.h>
#include <linux/syscore_ops.h>
......
......@@ -18,6 +18,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/jornada720.h>
......
......@@ -4,6 +4,7 @@
* Author: ???
*/
#include <linux/init.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/leds.h>
......
......@@ -10,6 +10,7 @@
* pace of the LED.
*/
#include <linux/init.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/leds.h>
......
......@@ -23,6 +23,7 @@
* Storage is local on the stack now.
*/
#include <linux/init.h>
#include <linux/io.h>
#include <linux/suspend.h>
#include <linux/errno.h>
#include <linux/time.h>
......
......@@ -38,9 +38,9 @@ ENTRY(sa1100_finish_suspend)
orr r4, r4, #MDREFR_K1DB2
ldr r5, =PPCR
@ Pre-load __udelay into the I-cache
@ Pre-load __loop_udelay into the I-cache
mov r0, #1
bl __udelay
bl __loop_udelay
mov r0, r0
@ The following must all exist in a single cache line to
......@@ -53,11 +53,11 @@ ENTRY(sa1100_finish_suspend)
@ delay 90us and set CPU PLL to lowest speed
@ fixes resume problem on high speed SA1110
mov r0, #90
bl __udelay
bl __loop_udelay
mov r1, #0
str r1, [r5]
mov r0, #90
bl __udelay
bl __loop_udelay
/*
* SA1110 SDRAM controller workaround. register values:
......
......@@ -22,7 +22,7 @@
static u32 notrace sa1100_read_sched_clock(void)
{
return OSCR;
return readl_relaxed(OSCR);
}
#define MIN_OSCR_DELTA 2
......@@ -32,8 +32,8 @@ static irqreturn_t sa1100_ost0_interrupt(int irq, void *dev_id)
struct clock_event_device *c = dev_id;
/* Disarm the compare/match, signal the event. */
OIER &= ~OIER_E0;
OSSR = OSSR_M0;
writel_relaxed(readl_relaxed(OIER) & ~OIER_E0, OIER);
writel_relaxed(OSSR_M0, OSSR);
c->event_handler(c);
return IRQ_HANDLED;
......@@ -44,10 +44,10 @@ sa1100_osmr0_set_next_event(unsigned long delta, struct clock_event_device *c)
{
unsigned long next, oscr;
OIER |= OIER_E0;
next = OSCR + delta;
OSMR0 = next;
oscr = OSCR;
writel_relaxed(readl_relaxed(OIER) | OIER_E0, OIER);
next = readl_relaxed(OSCR) + delta;
writel_relaxed(next, OSMR0);
oscr = readl_relaxed(OSCR);
return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0;
}
......@@ -59,8 +59,8 @@ sa1100_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *c)
case CLOCK_EVT_MODE_ONESHOT:
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_SHUTDOWN:
OIER &= ~OIER_E0;
OSSR = OSSR_M0;
writel_relaxed(readl_relaxed(OIER) & ~OIER_E0, OIER);
writel_relaxed(OSSR_M0, OSSR);
break;
case CLOCK_EVT_MODE_RESUME:
......@@ -86,8 +86,8 @@ static struct irqaction sa1100_timer_irq = {
static void __init sa1100_timer_init(void)
{
OIER = 0;
OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3;
writel_relaxed(0, OIER);
writel_relaxed(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR);
setup_sched_clock(sa1100_read_sched_clock, 32, 3686400);
......@@ -100,7 +100,7 @@ static void __init sa1100_timer_init(void)
setup_irq(IRQ_OST0, &sa1100_timer_irq);
clocksource_mmio_init(&OSCR, "oscr", CLOCK_TICK_RATE, 200, 32,
clocksource_mmio_init(OSCR, "oscr", CLOCK_TICK_RATE, 200, 32,
clocksource_mmio_readl_up);
clockevents_register_device(&ckevt_sa1100_osmr0);
}
......@@ -110,26 +110,26 @@ unsigned long osmr[4], oier;
static void sa1100_timer_suspend(void)
{
osmr[0] = OSMR0;
osmr[1] = OSMR1;
osmr[2] = OSMR2;
osmr[3] = OSMR3;
oier = OIER;
osmr[0] = readl_relaxed(OSMR0);
osmr[1] = readl_relaxed(OSMR1);
osmr[2] = readl_relaxed(OSMR2);
osmr[3] = readl_relaxed(OSMR3);
oier = readl_relaxed(OIER);
}
static void sa1100_timer_resume(void)
{
OSSR = 0x0f;
OSMR0 = osmr[0];
OSMR1 = osmr[1];
OSMR2 = osmr[2];
OSMR3 = osmr[3];
OIER = oier;
writel_relaxed(0x0f, OSSR);
writel_relaxed(osmr[0], OSMR0);
writel_relaxed(osmr[1], OSMR1);
writel_relaxed(osmr[2], OSMR2);
writel_relaxed(osmr[3], OSMR3);
writel_relaxed(oier, OIER);
/*
* OSMR0 is the system timer: make sure OSCR is sufficiently behind
*/
OSCR = OSMR0 - LATCH;
writel_relaxed(OSMR0 - LATCH, OSCR);
}
#else
#define sa1100_timer_suspend NULL
......
......@@ -14,6 +14,7 @@
#include <linux/percpu.h>
#include <asm/mmu_context.h>
#include <asm/thread_notify.h>
#include <asm/tlbflush.h>
static DEFINE_RAW_SPINLOCK(cpu_asid_lock);
......@@ -48,6 +49,40 @@ void cpu_set_reserved_ttbr0(void)
}
#endif
#ifdef CONFIG_PID_IN_CONTEXTIDR
static int contextidr_notifier(struct notifier_block *unused, unsigned long cmd,
void *t)
{
u32 contextidr;
pid_t pid;
struct thread_info *thread = t;
if (cmd != THREAD_NOTIFY_SWITCH)
return NOTIFY_DONE;
pid = task_pid_nr(thread->task) << ASID_BITS;
asm volatile(
" mrc p15, 0, %0, c13, c0, 1\n"
" bfi %1, %0, #0, %2\n"
" mcr p15, 0, %1, c13, c0, 1\n"
: "=r" (contextidr), "+r" (pid)
: "I" (ASID_BITS));
isb();
return NOTIFY_OK;
}
static struct notifier_block contextidr_notifier_block = {
.notifier_call = contextidr_notifier,
};
static int __init contextidr_notifier_init(void)
{
return thread_register_notifier(&contextidr_notifier_block);
}
arch_initcall(contextidr_notifier_init);
#endif
/*
* We fork()ed a process, and we need a new context for the child
* to run in.
......
......@@ -23,12 +23,12 @@
#include <linux/slab.h>
#include <linux/iommu.h>
#include <linux/vmalloc.h>
#include <linux/sizes.h>
#include <asm/memory.h>
#include <asm/highmem.h>
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
#include <asm/sizes.h>
#include <asm/mach/arch.h>
#include <asm/dma-iommu.h>
#include <asm/mach/map.h>
......
......@@ -21,13 +21,13 @@
#include <linux/gfp.h>
#include <linux/memblock.h>
#include <linux/dma-contiguous.h>
#include <linux/sizes.h>
#include <asm/mach-types.h>
#include <asm/memblock.h>
#include <asm/prom.h>
#include <asm/sections.h>
#include <asm/setup.h>
#include <asm/sizes.h>
#include <asm/tlb.h>
#include <asm/fixmap.h>
......
......@@ -25,6 +25,7 @@
#include <linux/mm.h>
#include <linux/vmalloc.h>
#include <linux/io.h>
#include <linux/sizes.h>
#include <asm/cp15.h>
#include <asm/cputype.h>
......@@ -32,7 +33,6 @@
#include <asm/mmu_context.h>
#include <asm/pgalloc.h>
#include <asm/tlbflush.h>
#include <asm/sizes.h>
#include <asm/system_info.h>
#include <asm/mach/map.h>
......
......@@ -16,13 +16,13 @@
#include <linux/memblock.h>
#include <linux/fs.h>
#include <linux/vmalloc.h>
#include <linux/sizes.h>
#include <asm/cp15.h>
#include <asm/cputype.h>
#include <asm/sections.h>
#include <asm/cachetype.h>
#include <asm/setup.h>
#include <asm/sizes.h>
#include <asm/smp_plat.h>
#include <asm/tlb.h>
#include <asm/highmem.h>
......@@ -421,12 +421,6 @@ static void __init build_mem_type_table(void)
cp = &cache_policies[cachepolicy];
vecs_pgprot = kern_pgprot = user_pgprot = cp->pte;
/*
* Only use write-through for non-SMP systems
*/
if (!is_smp() && cpu_arch >= CPU_ARCH_ARMv5 && cachepolicy > CPOLICY_WRITETHROUGH)
vecs_pgprot = cache_policies[CPOLICY_WRITETHROUGH].pte;
/*
* Enable CPU-specific coherency if supported.
* (Only available on XSC3 at the moment.)
......
......@@ -107,6 +107,12 @@ ENTRY(cpu_v6_switch_mm)
mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
mcr p15, 0, r2, c7, c10, 4 @ drain write buffer
mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
#ifdef CONFIG_PID_IN_CONTEXTIDR
mrc p15, 0, r2, c13, c0, 1 @ read current context ID
bic r2, r2, #0xff @ extract the PID
and r1, r1, #0xff
orr r1, r1, r2 @ insert into new context ID
#endif
mcr p15, 0, r1, c13, c0, 1 @ set context ID
#endif
mov pc, lr
......
......@@ -46,6 +46,11 @@ ENTRY(cpu_v7_switch_mm)
#ifdef CONFIG_ARM_ERRATA_430973
mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
#endif
#ifdef CONFIG_PID_IN_CONTEXTIDR
mrc p15, 0, r2, c13, c0, 1 @ read current context ID
lsr r2, r2, #8 @ extract the PID
bfi r1, r2, #8, #24 @ insert into new context ID
#endif
#ifdef CONFIG_ARM_ERRATA_754322
dsb
#endif
......
......@@ -23,26 +23,37 @@
#include <asm/ptrace.h>
#ifdef CONFIG_HW_PERF_EVENTS
/*
* OProfile has a curious naming scheme for the ARM PMUs, but they are
* part of the user ABI so we need to map from the perf PMU name for
* supported PMUs.
*/
static struct op_perf_name {
char *perf_name;
char *op_name;
} op_perf_name_map[] = {
{ "xscale1", "arm/xscale1" },
{ "xscale1", "arm/xscale2" },
{ "v6", "arm/armv6" },
{ "v6mpcore", "arm/mpcore" },
{ "ARMv7 Cortex-A8", "arm/armv7" },
{ "ARMv7 Cortex-A9", "arm/armv7-ca9" },
};
char *op_name_from_perf_id(void)
{
enum arm_perf_pmu_ids id = armpmu_get_pmu_id();
switch (id) {
case ARM_PERF_PMU_ID_XSCALE1:
return "arm/xscale1";
case ARM_PERF_PMU_ID_XSCALE2:
return "arm/xscale2";
case ARM_PERF_PMU_ID_V6:
return "arm/armv6";
case ARM_PERF_PMU_ID_V6MP:
return "arm/mpcore";
case ARM_PERF_PMU_ID_CA8:
return "arm/armv7";
case ARM_PERF_PMU_ID_CA9:
return "arm/armv7-ca9";
default:
return NULL;
int i;
struct op_perf_name names;
const char *perf_name = perf_pmu_name();
for (i = 0; i < ARRAY_SIZE(op_perf_name_map); ++i) {
names = op_perf_name_map[i];
if (!strcmp(names.perf_name, perf_name))
return names.op_name;
}
return NULL;
}
#endif
......
......@@ -85,7 +85,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
* the boot monitor to read the system wide flags register,
* and branch to the address found there.
*/
gic_raise_softirq(cpumask_of(cpu), 1);
gic_raise_softirq(cpumask_of(cpu), 0);
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {
......
......@@ -16,9 +16,9 @@
#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include <linux/amba/bus.h>
#include <linux/sizes.h>
#include <asm/irq.h>
#include <asm/sizes.h>
#define to_amba_driver(d) container_of(d, struct amba_driver, drv)
......
......@@ -19,6 +19,7 @@
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/jornada720.h>
......
......@@ -289,7 +289,7 @@ static irqreturn_t pxa_irda_sir_irq(int irq, void *dev_id)
}
lsr = STLSR;
}
si->last_oscr = OSCR;
si->last_oscr = readl_relaxed(OSCR);
break;
case 0x04: /* Received Data Available */
......@@ -300,7 +300,7 @@ static irqreturn_t pxa_irda_sir_irq(int irq, void *dev_id)
dev->stats.rx_bytes++;
async_unwrap_char(dev, &dev->stats, &si->rx_buff, STRBR);
} while (STLSR & LSR_DR);
si->last_oscr = OSCR;
si->last_oscr = readl_relaxed(OSCR);
break;
case 0x02: /* Transmit FIFO Data Request */
......@@ -316,7 +316,7 @@ static irqreturn_t pxa_irda_sir_irq(int irq, void *dev_id)
/* We need to ensure that the transmitter has finished. */
while ((STLSR & LSR_TEMT) == 0)
cpu_relax();
si->last_oscr = OSCR;
si->last_oscr = readl_relaxed(OSCR);
/*
* Ok, we've finished transmitting. Now enable
......@@ -370,7 +370,7 @@ static void pxa_irda_fir_dma_tx_irq(int channel, void *data)
while (ICSR1 & ICSR1_TBY)
cpu_relax();
si->last_oscr = OSCR;
si->last_oscr = readl_relaxed(OSCR);
/*
* HACK: It looks like the TBY bit is dropped too soon.
......@@ -470,7 +470,7 @@ static irqreturn_t pxa_irda_fir_irq(int irq, void *dev_id)
/* stop RX DMA */
DCSR(si->rxdma) &= ~DCSR_RUN;
si->last_oscr = OSCR;
si->last_oscr = readl_relaxed(OSCR);
icsr0 = ICSR0;
if (icsr0 & (ICSR0_FRE | ICSR0_RAB)) {
......@@ -546,7 +546,7 @@ static int pxa_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev)
skb_copy_from_linear_data(skb, si->dma_tx_buff, skb->len);
if (mtt)
while ((unsigned)(OSCR - si->last_oscr)/4 < mtt)
while ((unsigned)(readl_relaxed(OSCR) - si->last_oscr)/4 < mtt)
cpu_relax();
/* stop RX DMA, disable FICP */
......
......@@ -8,6 +8,7 @@
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/init.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
......
......@@ -53,9 +53,9 @@
#include <linux/delay.h>
#include <linux/types.h>
#include <linux/pinctrl/consumer.h>
#include <linux/sizes.h>
#include <asm/io.h>
#include <asm/sizes.h>
#define UART_NR 14
......
......@@ -54,10 +54,10 @@ static int sa1100dog_open(struct inode *inode, struct file *file)
return -EBUSY;
/* Activate SA1100 Watchdog timer */
OSMR3 = OSCR + pre_margin;
OSSR = OSSR_M3;
OWER = OWER_WME;
OIER |= OIER_E3;
writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3);
writel_relaxed(OSSR_M3, OSSR);
writel_relaxed(OWER_WME, OWER);
writel_relaxed(readl_relaxed(OIER) | OIER_E3, OIER);
return nonseekable_open(inode, file);
}
......@@ -80,7 +80,7 @@ static ssize_t sa1100dog_write(struct file *file, const char __user *data,
{
if (len)
/* Refresh OSMR3 timer. */
OSMR3 = OSCR + pre_margin;
writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3);
return len;
}
......@@ -114,7 +114,7 @@ static long sa1100dog_ioctl(struct file *file, unsigned int cmd,
break;
case WDIOC_KEEPALIVE:
OSMR3 = OSCR + pre_margin;
writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3);
ret = 0;
break;
......@@ -129,7 +129,7 @@ static long sa1100dog_ioctl(struct file *file, unsigned int cmd,
}
pre_margin = oscr_freq * time;
OSMR3 = OSCR + pre_margin;
writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3);
/*fall through*/
case WDIOC_GETTIMEOUT:
......
/*
* linux/include/asm-generic/sizes.h
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_GENERIC_SIZES_H__
#define __ASM_GENERIC_SIZES_H__
#define SZ_1 0x00000001
#define SZ_2 0x00000002
#define SZ_4 0x00000004
#define SZ_8 0x00000008
#define SZ_16 0x00000010
#define SZ_32 0x00000020
#define SZ_64 0x00000040
#define SZ_128 0x00000080
#define SZ_256 0x00000100
#define SZ_512 0x00000200
#define SZ_1K 0x00000400
#define SZ_2K 0x00000800
#define SZ_4K 0x00001000
#define SZ_8K 0x00002000
#define SZ_16K 0x00004000
#define SZ_32K 0x00008000
#define SZ_64K 0x00010000
#define SZ_128K 0x00020000
#define SZ_256K 0x00040000
#define SZ_512K 0x00080000
#define SZ_1M 0x00100000
#define SZ_2M 0x00200000
#define SZ_4M 0x00400000
#define SZ_8M 0x00800000
#define SZ_16M 0x01000000
#define SZ_32M 0x02000000
#define SZ_64M 0x04000000
#define SZ_128M 0x08000000
#define SZ_256M 0x10000000
#define SZ_512M 0x20000000
#define SZ_1G 0x40000000
#define SZ_2G 0x80000000
#endif /* __ASM_GENERIC_SIZES_H__ */
/* This is a placeholder, to be removed over time */
#include <linux/sizes.h>
/*
* include/linux/sizes.h
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __LINUX_SIZES_H__
#define __LINUX_SIZES_H__
#define SZ_1 0x00000001
#define SZ_2 0x00000002
#define SZ_4 0x00000004
#define SZ_8 0x00000008
#define SZ_16 0x00000010
#define SZ_32 0x00000020
#define SZ_64 0x00000040
#define SZ_128 0x00000080
#define SZ_256 0x00000100
#define SZ_512 0x00000200
#define SZ_1K 0x00000400
#define SZ_2K 0x00000800
#define SZ_4K 0x00001000
#define SZ_8K 0x00002000
#define SZ_16K 0x00004000
#define SZ_32K 0x00008000
#define SZ_64K 0x00010000
#define SZ_128K 0x00020000
#define SZ_256K 0x00040000
#define SZ_512K 0x00080000
#define SZ_1M 0x00100000
#define SZ_2M 0x00200000
#define SZ_4M 0x00400000
#define SZ_8M 0x00800000
#define SZ_16M 0x01000000
#define SZ_32M 0x02000000
#define SZ_64M 0x04000000
#define SZ_128M 0x08000000
#define SZ_256M 0x10000000
#define SZ_512M 0x20000000
#define SZ_1G 0x40000000
#define SZ_2G 0x80000000
#endif /* __LINUX_SIZES_H__ */
......@@ -357,7 +357,7 @@ config AUDIT
config AUDITSYSCALL
bool "Enable system-call auditing support"
depends on AUDIT && (X86 || PPC || S390 || IA64 || UML || SPARC64 || SUPERH || ARM)
depends on AUDIT && (X86 || PPC || S390 || IA64 || UML || SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT))
default y if SECURITY_SELINUX
help
Enable low-overhead system-call auditing infrastructure that
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment