Merge tag 'topic/phy-compliance-2020-04-08' of...

Merge tag 'topic/phy-compliance-2020-04-08' of git://anongit.freedesktop.org/drm/drm-misc into drm-intel-next-queued

Topic pull request for topic/phy-compliance:
- Standardize DP_PHY_TEST_PATTERN name.
- Add support for setting/getting test pattern from sink.
- Implement DP PHY compliance to i915.

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/efb3d0d9-2cf7-046b-3a9b-2548d086258e@linux.intel.comSigned-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c

@@ -2530,7 +2530,7 @@ static void dp_test_send_phy_test_pattern(struct dc_link *link)
 	/* get phy test pattern and pattern parameters from DP receiver */
 	core_link_read_dpcd(
 			link,
-			DP_TEST_PHY_PATTERN,
+			DP_PHY_TEST_PATTERN,
 			&dpcd_test_pattern.raw,
 			sizeof(dpcd_test_pattern));
 	core_link_read_dpcd(

drivers/gpu/drm/drm_dp_helper.c

@@ -1535,3 +1535,97 @@ int drm_dp_dsc_sink_supported_input_bpcs(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_S
 	return num_bpc;
 }
 EXPORT_SYMBOL(drm_dp_dsc_sink_supported_input_bpcs);
+
+/**
+ * drm_dp_get_phy_test_pattern() - get the requested pattern from the sink.
+ * @aux: DisplayPort AUX channel
+ * @data: DP phy compliance test parameters.
+ *
+ * Returns 0 on success or a negative error code on failure.
+ */
+int drm_dp_get_phy_test_pattern(struct drm_dp_aux *aux,
+				struct drm_dp_phy_test_params *data)
+{
+	int err;
+	u8 rate, lanes;
+
+	err = drm_dp_dpcd_readb(aux, DP_TEST_LINK_RATE, &rate);
+	if (err < 0)
+		return err;
+	data->link_rate = drm_dp_bw_code_to_link_rate(rate);
+
+	err = drm_dp_dpcd_readb(aux, DP_TEST_LANE_COUNT, &lanes);
+	if (err < 0)
+		return err;
+	data->num_lanes = lanes & DP_MAX_LANE_COUNT_MASK;
+
+	if (lanes & DP_ENHANCED_FRAME_CAP)
+		data->enhanced_frame_cap = true;
+
+	err = drm_dp_dpcd_readb(aux, DP_PHY_TEST_PATTERN, &data->phy_pattern);
+	if (err < 0)
+		return err;
+
+	switch (data->phy_pattern) {
+	case DP_PHY_TEST_PATTERN_80BIT_CUSTOM:
+		err = drm_dp_dpcd_read(aux, DP_TEST_80BIT_CUSTOM_PATTERN_7_0,
+				       &data->custom80, sizeof(data->custom80));
+		if (err < 0)
+			return err;
+
+		break;
+	case DP_PHY_TEST_PATTERN_CP2520:
+		err = drm_dp_dpcd_read(aux, DP_TEST_HBR2_SCRAMBLER_RESET,
+				       &data->hbr2_reset,
+				       sizeof(data->hbr2_reset));
+		if (err < 0)
+			return err;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_dp_get_phy_test_pattern);
+
+/**
+ * drm_dp_set_phy_test_pattern() - set the pattern to the sink.
+ * @aux: DisplayPort AUX channel
+ * @data: DP phy compliance test parameters.
+ *
+ * Returns 0 on success or a negative error code on failure.
+ */
+int drm_dp_set_phy_test_pattern(struct drm_dp_aux *aux,
+				struct drm_dp_phy_test_params *data, u8 dp_rev)
+{
+	int err, i;
+	u8 link_config[2];
+	u8 test_pattern;
+
+	link_config[0] = drm_dp_link_rate_to_bw_code(data->link_rate);
+	link_config[1] = data->num_lanes;
+	if (data->enhanced_frame_cap)
+		link_config[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
+	err = drm_dp_dpcd_write(aux, DP_LINK_BW_SET, link_config, 2);
+	if (err < 0)
+		return err;
+
+	test_pattern = data->phy_pattern;
+	if (dp_rev < 0x12) {
+		test_pattern = (test_pattern << 2) &
+			       DP_LINK_QUAL_PATTERN_11_MASK;
+		err = drm_dp_dpcd_writeb(aux, DP_TRAINING_PATTERN_SET,
+					 test_pattern);
+		if (err < 0)
+			return err;
+	} else {
+		for (i = 0; i < data->num_lanes; i++) {
+			err = drm_dp_dpcd_writeb(aux,
+						 DP_LINK_QUAL_LANE0_SET + i,
+						 test_pattern);
+			if (err < 0)
+				return err;
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_dp_set_phy_test_pattern);

drivers/gpu/drm/i915/display/intel_display_debugfs.c

@@ -1326,6 +1326,16 @@ static int i915_displayport_test_data_show(struct seq_file *m, void *data)
 					   intel_dp->compliance.test_data.vdisplay);
 				seq_printf(m, "bpc: %u\n",
 					   intel_dp->compliance.test_data.bpc);
+			} else if (intel_dp->compliance.test_type ==
+				   DP_TEST_LINK_PHY_TEST_PATTERN) {
+				seq_printf(m, "pattern: %d\n",
+					   intel_dp->compliance.test_data.phytest.phy_pattern);
+				seq_printf(m, "Number of lanes: %d\n",
+					   intel_dp->compliance.test_data.phytest.num_lanes);
+				seq_printf(m, "Link Rate: %d\n",
+					   intel_dp->compliance.test_data.phytest.link_rate);
+				seq_printf(m, "level: %02x\n",
+					   intel_dp->train_set[0]);
 			}
 		} else
 			seq_puts(m, "0");
@@ -1358,7 +1368,7 @@ static int i915_displayport_test_type_show(struct seq_file *m, void *data)
 
 		if (encoder && connector->status == connector_status_connected) {
 			intel_dp = enc_to_intel_dp(encoder);
-			seq_printf(m, "%02lx", intel_dp->compliance.test_type);
+			seq_printf(m, "%02lx\n", intel_dp->compliance.test_type);
 		} else
 			seq_puts(m, "0");
 	}

drivers/gpu/drm/i915/display/intel_display_types.h

@@ -1258,6 +1258,7 @@ struct intel_dp_compliance_data {
 	u8 video_pattern;
 	u16 hdisplay, vdisplay;
 	u8 bpc;
+	struct drm_dp_phy_test_params phytest;
 };
 
 struct intel_dp_compliance {

drivers/gpu/drm/i915/display/intel_dp.c

@@ -5401,9 +5401,180 @@ static u8 intel_dp_autotest_edid(struct intel_dp *intel_dp)
 	return test_result;
 }
 
+static u8 intel_dp_prepare_phytest(struct intel_dp *intel_dp)
+{
+	struct drm_dp_phy_test_params *data =
+		&intel_dp->compliance.test_data.phytest;
+
+	if (drm_dp_get_phy_test_pattern(&intel_dp->aux, data)) {
+		DRM_DEBUG_KMS("DP Phy Test pattern AUX read failure\n");
+		return DP_TEST_NAK;
+	}
+
+	/*
+	 * link_mst is set to false to avoid executing mst related code
+	 * during compliance testing.
+	 */
+	intel_dp->link_mst = false;
+
+	return DP_TEST_ACK;
+}
+
+static void intel_dp_phy_pattern_update(struct intel_dp *intel_dp)
+{
+	struct drm_i915_private *dev_priv =
+			to_i915(dp_to_dig_port(intel_dp)->base.base.dev);
+	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+	struct drm_dp_phy_test_params *data =
+			&intel_dp->compliance.test_data.phytest;
+	struct intel_crtc *crtc = to_intel_crtc(intel_dig_port->base.base.crtc);
+	enum pipe pipe = crtc->pipe;
+	u32 pattern_val;
+
+	switch (data->phy_pattern) {
+	case DP_PHY_TEST_PATTERN_NONE:
+		DRM_DEBUG_KMS("Disable Phy Test Pattern\n");
+		intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe), 0x0);
+		break;
+	case DP_PHY_TEST_PATTERN_D10_2:
+		DRM_DEBUG_KMS("Set D10.2 Phy Test Pattern\n");
+		intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe),
+			       DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_D10_2);
+		break;
+	case DP_PHY_TEST_PATTERN_ERROR_COUNT:
+		DRM_DEBUG_KMS("Set Error Count Phy Test Pattern\n");
+		intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe),
+			       DDI_DP_COMP_CTL_ENABLE |
+			       DDI_DP_COMP_CTL_SCRAMBLED_0);
+		break;
+	case DP_PHY_TEST_PATTERN_PRBS7:
+		DRM_DEBUG_KMS("Set PRBS7 Phy Test Pattern\n");
+		intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe),
+			       DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_PRBS7);
+		break;
+	case DP_PHY_TEST_PATTERN_80BIT_CUSTOM:
+		/*
+		 * FIXME: Ideally pattern should come from DPCD 0x250. As
+		 * current firmware of DPR-100 could not set it, so hardcoding
+		 * now for complaince test.
+		 */
+		DRM_DEBUG_KMS("Set 80Bit Custom Phy Test Pattern 0x3e0f83e0 0x0f83e0f8 0x0000f83e\n");
+		pattern_val = 0x3e0f83e0;
+		intel_de_write(dev_priv, DDI_DP_COMP_PAT(pipe, 0), pattern_val);
+		pattern_val = 0x0f83e0f8;
+		intel_de_write(dev_priv, DDI_DP_COMP_PAT(pipe, 1), pattern_val);
+		pattern_val = 0x0000f83e;
+		intel_de_write(dev_priv, DDI_DP_COMP_PAT(pipe, 2), pattern_val);
+		intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe),
+			       DDI_DP_COMP_CTL_ENABLE |
+			       DDI_DP_COMP_CTL_CUSTOM80);
+		break;
+	case DP_PHY_TEST_PATTERN_CP2520:
+		/*
+		 * FIXME: Ideally pattern should come from DPCD 0x24A. As
+		 * current firmware of DPR-100 could not set it, so hardcoding
+		 * now for complaince test.
+		 */
+		DRM_DEBUG_KMS("Set HBR2 compliance Phy Test Pattern\n");
+		pattern_val = 0xFB;
+		intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe),
+			       DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_HBR2 |
+			       pattern_val);
+		break;
+	default:
+		WARN(1, "Invalid Phy Test Pattern\n");
+	}
+}
+
+static void
+intel_dp_autotest_phy_ddi_disable(struct intel_dp *intel_dp)
+{
+	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+	struct drm_device *dev = intel_dig_port->base.base.dev;
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	struct intel_crtc *crtc = to_intel_crtc(intel_dig_port->base.base.crtc);
+	enum pipe pipe = crtc->pipe;
+	u32 trans_ddi_func_ctl_value, trans_conf_value, dp_tp_ctl_value;
+
+	trans_ddi_func_ctl_value = intel_de_read(dev_priv,
+						 TRANS_DDI_FUNC_CTL(pipe));
+	trans_conf_value = intel_de_read(dev_priv, PIPECONF(pipe));
+	dp_tp_ctl_value = intel_de_read(dev_priv, TGL_DP_TP_CTL(pipe));
+
+	trans_ddi_func_ctl_value &= ~(TRANS_DDI_FUNC_ENABLE |
+				      TGL_TRANS_DDI_PORT_MASK);
+	trans_conf_value &= ~PIPECONF_ENABLE;
+	dp_tp_ctl_value &= ~DP_TP_CTL_ENABLE;
+
+	intel_de_write(dev_priv, PIPECONF(pipe), trans_conf_value);
+	intel_de_write(dev_priv, TRANS_DDI_FUNC_CTL(pipe),
+		       trans_ddi_func_ctl_value);
+	intel_de_write(dev_priv, TGL_DP_TP_CTL(pipe), dp_tp_ctl_value);
+}
+
+static void
+intel_dp_autotest_phy_ddi_enable(struct intel_dp *intel_dp, uint8_t lane_cnt)
+{
+	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+	struct drm_device *dev = intel_dig_port->base.base.dev;
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	enum port port = intel_dig_port->base.port;
+	struct intel_crtc *crtc = to_intel_crtc(intel_dig_port->base.base.crtc);
+	enum pipe pipe = crtc->pipe;
+	u32 trans_ddi_func_ctl_value, trans_conf_value, dp_tp_ctl_value;
+
+	trans_ddi_func_ctl_value = intel_de_read(dev_priv,
+						 TRANS_DDI_FUNC_CTL(pipe));
+	trans_conf_value = intel_de_read(dev_priv, PIPECONF(pipe));
+	dp_tp_ctl_value = intel_de_read(dev_priv, TGL_DP_TP_CTL(pipe));
+
+	trans_ddi_func_ctl_value |= TRANS_DDI_FUNC_ENABLE |
+				    TGL_TRANS_DDI_SELECT_PORT(port);
+	trans_conf_value |= PIPECONF_ENABLE;
+	dp_tp_ctl_value |= DP_TP_CTL_ENABLE;
+
+	intel_de_write(dev_priv, PIPECONF(pipe), trans_conf_value);
+	intel_de_write(dev_priv, TGL_DP_TP_CTL(pipe), dp_tp_ctl_value);
+	intel_de_write(dev_priv, TRANS_DDI_FUNC_CTL(pipe),
+		       trans_ddi_func_ctl_value);
+}
+
+void intel_dp_process_phy_request(struct intel_dp *intel_dp)
+{
+	struct drm_dp_phy_test_params *data =
+		&intel_dp->compliance.test_data.phytest;
+	u8 link_status[DP_LINK_STATUS_SIZE];
+
+	if (!intel_dp_get_link_status(intel_dp, link_status)) {
+		DRM_DEBUG_KMS("failed to get link status\n");
+		return;
+	}
+
+	/* retrieve vswing & pre-emphasis setting */
+	intel_dp_get_adjust_train(intel_dp, link_status);
+
+	intel_dp_autotest_phy_ddi_disable(intel_dp);
+
+	intel_dp_set_signal_levels(intel_dp);
+
+	intel_dp_phy_pattern_update(intel_dp);
+
+	intel_dp_autotest_phy_ddi_enable(intel_dp, data->num_lanes);
+
+	drm_dp_set_phy_test_pattern(&intel_dp->aux, data,
+				    link_status[DP_DPCD_REV]);
+}
+
 static u8 intel_dp_autotest_phy_pattern(struct intel_dp *intel_dp)
 {
 	u8 test_result = DP_TEST_NAK;
+
+	test_result = intel_dp_prepare_phytest(intel_dp);
+	if (test_result != DP_TEST_ACK)
+		DRM_ERROR("Phy test preparation failed\n");
+
+	intel_dp_process_phy_request(intel_dp);
+
 	return test_result;
 }
 

drivers/gpu/drm/i915/display/intel_dp.h

@@ -118,6 +118,7 @@ void intel_dp_set_infoframes(struct intel_encoder *encoder, bool enable,
 			     const struct intel_crtc_state *crtc_state,
 			     const struct drm_connector_state *conn_state);
 bool intel_digital_port_connected(struct intel_encoder *encoder);
+void intel_dp_process_phy_request(struct intel_dp *intel_dp);
 
 static inline unsigned int intel_dp_unused_lane_mask(int lane_count)
 {

drivers/gpu/drm/i915/display/intel_dp_link_training.c

@@ -34,9 +34,8 @@ intel_dp_dump_link_status(const u8 link_status[DP_LINK_STATUS_SIZE])
 		      link_status[3], link_status[4], link_status[5]);
 }
 
-static void
-intel_get_adjust_train(struct intel_dp *intel_dp,
-		       const u8 link_status[DP_LINK_STATUS_SIZE])
+void intel_dp_get_adjust_train(struct intel_dp *intel_dp,
+			       const u8 link_status[DP_LINK_STATUS_SIZE])
 {
 	u8 v = 0;
 	u8 p = 0;
@@ -219,7 +218,7 @@ intel_dp_link_training_clock_recovery(struct intel_dp *intel_dp)
 		voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
 
 		/* Update training set as requested by target */
-		intel_get_adjust_train(intel_dp, link_status);
+		intel_dp_get_adjust_train(intel_dp, link_status);
 		if (!intel_dp_update_link_train(intel_dp)) {
 			drm_err(&i915->drm,
 				"failed to update link training\n");
@@ -338,7 +337,7 @@ intel_dp_link_training_channel_equalization(struct intel_dp *intel_dp)
 		}
 
 		/* Update training set as requested by target */
-		intel_get_adjust_train(intel_dp, link_status);
+		intel_dp_get_adjust_train(intel_dp, link_status);
 		if (!intel_dp_update_link_train(intel_dp)) {
 			drm_err(&i915->drm,
 				"failed to update link training\n");

drivers/gpu/drm/i915/display/intel_dp_link_training.h

@@ -6,8 +6,12 @@
 #ifndef __INTEL_DP_LINK_TRAINING_H__
 #define __INTEL_DP_LINK_TRAINING_H__
 
+#include <drm/drm_dp_helper.h>
+
 struct intel_dp;
 
+void intel_dp_get_adjust_train(struct intel_dp *intel_dp,
+			       const u8 link_status[DP_LINK_STATUS_SIZE]);
 void intel_dp_start_link_train(struct intel_dp *intel_dp);
 void intel_dp_stop_link_train(struct intel_dp *intel_dp);
 

drivers/gpu/drm/i915/i915_reg.h

@@ -9886,6 +9886,24 @@ enum skl_power_gate {
 #define  DDI_BUF_BALANCE_LEG_ENABLE	(1 << 31)
 #define DDI_BUF_TRANS_HI(port, i)	_MMIO(_PORT(port, _DDI_BUF_TRANS_A, _DDI_BUF_TRANS_B) + (i) * 8 + 4)
 
+/* DDI DP Compliance Control */
+#define _DDI_DP_COMP_CTL_A			0x605F0
+#define _DDI_DP_COMP_CTL_B			0x615F0
+#define DDI_DP_COMP_CTL(pipe)			_MMIO_PIPE(pipe, _DDI_DP_COMP_CTL_A, _DDI_DP_COMP_CTL_B)
+#define   DDI_DP_COMP_CTL_ENABLE		(1 << 31)
+#define   DDI_DP_COMP_CTL_D10_2			(0 << 28)
+#define   DDI_DP_COMP_CTL_SCRAMBLED_0		(1 << 28)
+#define   DDI_DP_COMP_CTL_PRBS7			(2 << 28)
+#define   DDI_DP_COMP_CTL_CUSTOM80		(3 << 28)
+#define   DDI_DP_COMP_CTL_HBR2			(4 << 28)
+#define   DDI_DP_COMP_CTL_SCRAMBLED_1		(5 << 28)
+#define   DDI_DP_COMP_CTL_HBR2_RESET		(0xFC << 0)
+
+/* DDI DP Compliance Pattern */
+#define _DDI_DP_COMP_PAT_A			0x605F4
+#define _DDI_DP_COMP_PAT_B			0x615F4
+#define DDI_DP_COMP_PAT(pipe, i)		_MMIO(_PIPE(pipe, _DDI_DP_COMP_PAT_A, _DDI_DP_COMP_PAT_B) + (i) * 4)
+
 /* Sideband Interface (SBI) is programmed indirectly, via
  * SBI_ADDR, which contains the register offset; and SBI_DATA,
  * which contains the payload */

include/drm/drm_dp_helper.h

@@ -701,7 +701,16 @@
 # define DP_TEST_CRC_SUPPORTED		    (1 << 5)
 # define DP_TEST_COUNT_MASK		    0xf
 
-#define DP_TEST_PHY_PATTERN                 0x248
+#define DP_PHY_TEST_PATTERN                 0x248
+# define DP_PHY_TEST_PATTERN_SEL_MASK       0x7
+# define DP_PHY_TEST_PATTERN_NONE           0x0
+# define DP_PHY_TEST_PATTERN_D10_2          0x1
+# define DP_PHY_TEST_PATTERN_ERROR_COUNT    0x2
+# define DP_PHY_TEST_PATTERN_PRBS7          0x3
+# define DP_PHY_TEST_PATTERN_80BIT_CUSTOM   0x4
+# define DP_PHY_TEST_PATTERN_CP2520         0x5
+
+#define DP_TEST_HBR2_SCRAMBLER_RESET        0x24A
 #define DP_TEST_80BIT_CUSTOM_PATTERN_7_0    0x250
 #define	DP_TEST_80BIT_CUSTOM_PATTERN_15_8   0x251
 #define	DP_TEST_80BIT_CUSTOM_PATTERN_23_16  0x252
@@ -1735,4 +1744,26 @@ static inline void drm_dp_cec_unset_edid(struct drm_dp_aux *aux)
 
 #endif
 
+/**
+ * struct drm_dp_phy_test_params - DP Phy Compliance parameters
+ * @link_rate: Requested Link rate from DPCD 0x219
+ * @num_lanes: Number of lanes requested by sing through DPCD 0x220
+ * @phy_pattern: DP Phy test pattern from DPCD 0x248
+ * @hb2_reset: DP HBR2_COMPLIANCE_SCRAMBLER_RESET from DCPD 0x24A and 0x24B
+ * @custom80: DP Test_80BIT_CUSTOM_PATTERN from DPCDs 0x250 through 0x259
+ * @enhanced_frame_cap: flag for enhanced frame capability.
+ */
+struct drm_dp_phy_test_params {
+	int link_rate;
+	u8 num_lanes;
+	u8 phy_pattern;
+	u8 hbr2_reset[2];
+	u8 custom80[10];
+	bool enhanced_frame_cap;
+};
+
+int drm_dp_get_phy_test_pattern(struct drm_dp_aux *aux,
+				struct drm_dp_phy_test_params *data);
+int drm_dp_set_phy_test_pattern(struct drm_dp_aux *aux,
+				struct drm_dp_phy_test_params *data, u8 dp_rev);
 #endif /* _DRM_DP_HELPER_H_ */