arm64: dts: ti: k3-am642-evm: Enable main_i2c0 and eeprom

Enable AT24CM01 on the base board using the corresponding compatible.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230414073328.381336-7-nm@ti.comSigned-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arch/arm64/boot/dts/ti/k3-am642-evm.dts

@@ -233,6 +233,13 @@ AM64X_IOPAD(0x0218, PIN_INPUT, 0) /* (A14) SPI0_D1 */
 		>;
 	};
 
+	main_i2c0_pins_default: main-i2c0-pins-default {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) /* (A18) I2C0_SCL */
+			AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */
+		>;
+	};
+
 	main_i2c1_pins_default: main-i2c1-pins-default {
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */
@@ -335,6 +342,19 @@ &main_uart1 {
 	status = "reserved";
 };
 
+&main_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	eeprom@50 {
+		/* AT24CM01 */
+		compatible = "atmel,24c1024";
+		reg = <0x50>;
+	};
+};
+
 &main_i2c1 {
 	status = "okay";
 	pinctrl-names = "default";