Merge branch '2016-02-26-st-drm-next' of...

Merge branch '2016-02-26-st-drm-next' of http://git.linaro.org/people/benjamin.gaignard/kernel into drm-next

Here are sti patches for drm-next.
It brings:
  - The support of the atomic_check for the planes and minor fixes for
planes
  - The support of the vendor specific infoframe for HDMI and the
support of 2 HDMI properties related to the connector
  - The support of the DVO solving panel detection issue and timing issue.
  - The support of debugfs for connectors, encoders, crtcs and planes.

* '2016-02-26-st-drm-next' of http://git.linaro.org/people/benjamin.gaignard/kernel: (36 commits)
  drm/sti: use u32 to store DMA addresses
  drm: sti: remove sti_gem_prime_export hack
  drm/sti: add debugfs fps_show/fps_get mechanism for planes
  drm/sti: add debugfs entries for TVOUT encoders
  drm/sti: add debugfs entries for MIXER crtc
  drm/sti: add debugfs entries for VID plane
  drm/sti: add debugfs entries for HQVDP plane
  drm/sti: add debugfs entries for GDP planes
  drm/sti: add debugfs entries for CURSOR plane
  drm/sti: add debugfs entries for HDA connector
  drm/sti: add debugfs entries for DVO connector
  drm/sti: add debugfs entries for HDMI connector
  drm/sti: add hdmi_mode property for HDMI connector
  drm/sti: add colorspace property to the HDMI connector
  drm/sti: add HDMI vendor specific infoframe
  drm/sti: reset infoframe transmission when HDMI is stopped
  drm/sti: HDMI infoframe transmission mode not take into account
  drm/sti: reset HD DACS when HDA connector is created
  drm/sti: fix dvo data_enable signal
  drm/sti: adjust delay for DVO
  ...

drivers/gpu/drm/sti/sti_awg_utils.c

@@ -7,6 +7,7 @@
 #include "sti_awg_utils.h"
 
 #define AWG_OPCODE_OFFSET 10
+#define AWG_MAX_ARG       0x3ff
 
 enum opcode {
 	SET,
@@ -34,6 +35,8 @@ static int awg_generate_instr(enum opcode opcode,
 	/* skip, repeat and replay arg should not exceed 1023.
 	 * If user wants to exceed this value, the instruction should be
 	 * duplicate and arg should be adjust for each duplicated instruction.
+	 *
+	 * mux_sel is used in case of SAV/EAV synchronization.
 	 */
 
 	while (arg_tmp > 0) {
@@ -65,7 +68,7 @@ static int awg_generate_instr(enum opcode opcode,
 
 			mux = 0;
 			data_enable = 0;
-			arg &= (0x3ff);
+			arg &= AWG_MAX_ARG;
 			break;
 		case REPEAT:
 		case REPLAY:
@@ -76,13 +79,13 @@ static int awg_generate_instr(enum opcode opcode,
 
 			mux = 0;
 			data_enable = 0;
-			arg &= (0x3ff);
+			arg &= AWG_MAX_ARG;
 			break;
 		case JUMP:
 			mux = 0;
 			data_enable = 0;
 			arg |= 0x40; /* for jump instruction 7th bit is 1 */
-			arg &= 0x3ff;
+			arg &= AWG_MAX_ARG;
 			break;
 		case STOP:
 			arg = 0;
@@ -110,68 +113,75 @@ static int awg_generate_instr(enum opcode opcode,
 	return 0;
 }
 
-int sti_awg_generate_code_data_enable_mode(
+static int awg_generate_line_signal(
 		struct awg_code_generation_params *fwparams,
 		struct awg_timing *timing)
 {
 	long int val;
-	long int data_en;
 	int ret = 0;
 
-	if (timing->trailing_lines > 0) {
-		/* skip trailing lines */
-		val = timing->blanking_level;
-		data_en = 0;
-		ret |= awg_generate_instr(RPLSET, val, 0, data_en, fwparams);
-
-		val = timing->trailing_lines - 1;
-		data_en = 0;
-		ret |= awg_generate_instr(REPLAY, val, 0, data_en, fwparams);
-	}
-
 	if (timing->trailing_pixels > 0) {
 		/* skip trailing pixel */
 		val = timing->blanking_level;
-		data_en = 0;
-		ret |= awg_generate_instr(RPLSET, val, 0, data_en, fwparams);
+		ret |= awg_generate_instr(RPLSET, val, 0, 0, fwparams);
 
 		val = timing->trailing_pixels - 1;
-		data_en = 0;
-		ret |= awg_generate_instr(SKIP, val, 0, data_en, fwparams);
+		ret |= awg_generate_instr(SKIP, val, 0, 0, fwparams);
 	}
 
 	/* set DE signal high */
 	val = timing->blanking_level;
-	data_en = 1;
 	ret |= awg_generate_instr((timing->trailing_pixels > 0) ? SET : RPLSET,
-			val, 0, data_en, fwparams);
+			val, 0, 1, fwparams);
 
 	if (timing->blanking_pixels > 0) {
 		/* skip the number of active pixel */
 		val = timing->active_pixels - 1;
-		data_en = 1;
-		ret |= awg_generate_instr(SKIP, val, 0, data_en, fwparams);
+		ret |= awg_generate_instr(SKIP, val, 0, 1, fwparams);
 
 		/* set DE signal low */
 		val = timing->blanking_level;
-		data_en = 0;
-		ret |= awg_generate_instr(SET, val, 0, data_en, fwparams);
+		ret |= awg_generate_instr(SET, val, 0, 0, fwparams);
+	}
+
+	return ret;
+}
+
+int sti_awg_generate_code_data_enable_mode(
+		struct awg_code_generation_params *fwparams,
+		struct awg_timing *timing)
+{
+	long int val, tmp_val;
+	int ret = 0;
+
+	if (timing->trailing_lines > 0) {
+		/* skip trailing lines */
+		val = timing->blanking_level;
+		ret |= awg_generate_instr(RPLSET, val, 0, 0, fwparams);
+
+		val = timing->trailing_lines - 1;
+		ret |= awg_generate_instr(REPLAY, val, 0, 0, fwparams);
 	}
 
-	/* replay the sequence as many active lines defined */
-	val = timing->active_lines - 1;
-	data_en = 0;
-	ret |= awg_generate_instr(REPLAY, val, 0, data_en, fwparams);
+	tmp_val = timing->active_lines - 1;
+
+	while (tmp_val > 0) {
+		/* generate DE signal for each line */
+		ret |= awg_generate_line_signal(fwparams, timing);
+		/* replay the sequence as many active lines defined */
+		ret |= awg_generate_instr(REPLAY,
+					  min_t(int, AWG_MAX_ARG, tmp_val),
+					  0, 0, fwparams);
+		tmp_val -= AWG_MAX_ARG;
+	}
 
 	if (timing->blanking_lines > 0) {
 		/* skip blanking lines */
 		val = timing->blanking_level;
-		data_en = 0;
-		ret |= awg_generate_instr(RPLSET, val, 0, data_en, fwparams);
+		ret |= awg_generate_instr(RPLSET, val, 0, 0, fwparams);
 
 		val = timing->blanking_lines - 1;
-		data_en = 0;
-		ret |= awg_generate_instr(REPLAY, val, 0, data_en, fwparams);
+		ret |= awg_generate_instr(REPLAY, val, 0, 0, fwparams);
 	}
 
 	return ret;

drivers/gpu/drm/sti/sti_compositor.c

@@ -75,13 +75,13 @@ static int sti_compositor_bind(struct device *dev,
 		switch (desc[i].type) {
 		case STI_VID_SUBDEV:
 			compo->vid[vid_id++] =
-			    sti_vid_create(compo->dev, desc[i].id,
+			    sti_vid_create(compo->dev, drm_dev, desc[i].id,
 					   compo->regs + desc[i].offset);
 			break;
 		case STI_MIXER_MAIN_SUBDEV:
 		case STI_MIXER_AUX_SUBDEV:
 			compo->mixer[mixer_id++] =
-			    sti_mixer_create(compo->dev, desc[i].id,
+			    sti_mixer_create(compo->dev, drm_dev, desc[i].id,
 					     compo->regs + desc[i].offset);
 			break;
 		case STI_GPD_SUBDEV:

drivers/gpu/drm/sti/sti_crtc.c

@@ -51,6 +51,15 @@ static void sti_crtc_disabling(struct drm_crtc *crtc)
 	mixer->status = STI_MIXER_DISABLING;
 }
 
+static bool sti_crtc_mode_fixup(struct drm_crtc *crtc,
+				const struct drm_display_mode *mode,
+				struct drm_display_mode *adjusted_mode)
+{
+	/* accept the provided drm_display_mode, do not fix it up */
+	drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V);
+	return true;
+}
+
 static int
 sti_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode)
 {

drivers/gpu/drm/sti/sti_cursor.c

@@ -5,12 +5,10 @@
  *          for STMicroelectronics.
  * License terms:  GNU General Public License (GPL), version 2
  */
-#include <drm/drmP.h>
 
-#include <drm/drm_atomic_helper.h>
+#include <drm/drm_atomic.h>
 #include <drm/drm_fb_cma_helper.h>
 #include <drm/drm_gem_cma_helper.h>
-#include <drm/drm_plane_helper.h>
 
 #include "sti_compositor.h"
 #include "sti_cursor.h"
@@ -74,6 +72,82 @@ static const uint32_t cursor_supported_formats[] = {
 
 #define to_sti_cursor(x) container_of(x, struct sti_cursor, plane)
 
+#define DBGFS_DUMP(reg) seq_printf(s, "\n  %-25s 0x%08X", #reg, \
+				   readl(cursor->regs + reg))
+
+static void cursor_dbg_vpo(struct seq_file *s, u32 val)
+{
+	seq_printf(s, "\txdo:%4d\tydo:%4d", val & 0x0FFF, (val >> 16) & 0x0FFF);
+}
+
+static void cursor_dbg_size(struct seq_file *s, u32 val)
+{
+	seq_printf(s, "\t%d x %d", val & 0x07FF, (val >> 16) & 0x07FF);
+}
+
+static void cursor_dbg_pml(struct seq_file *s,
+			   struct sti_cursor *cursor, u32 val)
+{
+	if (cursor->pixmap.paddr == val)
+		seq_printf(s, "\tVirt @: %p", cursor->pixmap.base);
+}
+
+static void cursor_dbg_cml(struct seq_file *s,
+			   struct sti_cursor *cursor, u32 val)
+{
+	if (cursor->clut_paddr == val)
+		seq_printf(s, "\tVirt @: %p", cursor->clut);
+}
+
+static int cursor_dbg_show(struct seq_file *s, void *data)
+{
+	struct drm_info_node *node = s->private;
+	struct sti_cursor *cursor = (struct sti_cursor *)node->info_ent->data;
+	struct drm_device *dev = node->minor->dev;
+	int ret;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	seq_printf(s, "%s: (vaddr = 0x%p)",
+		   sti_plane_to_str(&cursor->plane), cursor->regs);
+
+	DBGFS_DUMP(CUR_CTL);
+	DBGFS_DUMP(CUR_VPO);
+	cursor_dbg_vpo(s, readl(cursor->regs + CUR_VPO));
+	DBGFS_DUMP(CUR_PML);
+	cursor_dbg_pml(s, cursor, readl(cursor->regs + CUR_PML));
+	DBGFS_DUMP(CUR_PMP);
+	DBGFS_DUMP(CUR_SIZE);
+	cursor_dbg_size(s, readl(cursor->regs + CUR_SIZE));
+	DBGFS_DUMP(CUR_CML);
+	cursor_dbg_cml(s, cursor, readl(cursor->regs + CUR_CML));
+	DBGFS_DUMP(CUR_AWS);
+	DBGFS_DUMP(CUR_AWE);
+	seq_puts(s, "\n");
+
+	mutex_unlock(&dev->struct_mutex);
+	return 0;
+}
+
+static struct drm_info_list cursor_debugfs_files[] = {
+	{ "cursor", cursor_dbg_show, 0, NULL },
+};
+
+static int cursor_debugfs_init(struct sti_cursor *cursor,
+			       struct drm_minor *minor)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(cursor_debugfs_files); i++)
+		cursor_debugfs_files[i].data = cursor;
+
+	return drm_debugfs_create_files(cursor_debugfs_files,
+					ARRAY_SIZE(cursor_debugfs_files),
+					minor->debugfs_root, minor);
+}
+
 static void sti_cursor_argb8888_to_clut8(struct sti_cursor *cursor, u32 *src)
 {
 	u8  *dst = cursor->pixmap.base;
@@ -110,35 +184,31 @@ static void sti_cursor_init(struct sti_cursor *cursor)
 						  (b * 5);
 }
 
-static void sti_cursor_atomic_update(struct drm_plane *drm_plane,
-				     struct drm_plane_state *oldstate)
+static int sti_cursor_atomic_check(struct drm_plane *drm_plane,
+				   struct drm_plane_state *state)
 {
-	struct drm_plane_state *state = drm_plane->state;
 	struct sti_plane *plane = to_sti_plane(drm_plane);
 	struct sti_cursor *cursor = to_sti_cursor(plane);
 	struct drm_crtc *crtc = state->crtc;
-	struct sti_mixer *mixer = to_sti_mixer(crtc);
 	struct drm_framebuffer *fb = state->fb;
-	struct drm_display_mode *mode = &crtc->mode;
-	int dst_x = state->crtc_x;
-	int dst_y = state->crtc_y;
-	int dst_w = clamp_val(state->crtc_w, 0, mode->crtc_hdisplay - dst_x);
-	int dst_h = clamp_val(state->crtc_h, 0, mode->crtc_vdisplay - dst_y);
+	struct drm_crtc_state *crtc_state;
+	struct drm_display_mode *mode;
+	int dst_x, dst_y, dst_w, dst_h;
+	int src_w, src_h;
+
+	/* no need for further checks if the plane is being disabled */
+	if (!crtc || !fb)
+		return 0;
+
+	crtc_state = drm_atomic_get_crtc_state(state->state, crtc);
+	mode = &crtc_state->mode;
+	dst_x = state->crtc_x;
+	dst_y = state->crtc_y;
+	dst_w = clamp_val(state->crtc_w, 0, mode->crtc_hdisplay - dst_x);
+	dst_h = clamp_val(state->crtc_h, 0, mode->crtc_vdisplay - dst_y);
 	/* src_x are in 16.16 format */
-	int src_w = state->src_w >> 16;
-	int src_h = state->src_h >> 16;
-	bool first_prepare = plane->status == STI_PLANE_DISABLED ? true : false;
-	struct drm_gem_cma_object *cma_obj;
-	u32 y, x;
-	u32 val;
-
-	DRM_DEBUG_KMS("CRTC:%d (%s) drm plane:%d (%s)\n",
-		      crtc->base.id, sti_mixer_to_str(mixer),
-		      drm_plane->base.id, sti_plane_to_str(plane));
-	DRM_DEBUG_KMS("(%dx%d)@(%d,%d)\n", dst_w, dst_h, dst_x, dst_y);
-
-	dev_dbg(cursor->dev, "%s %s\n", __func__,
-		sti_plane_to_str(plane));
+	src_w = state->src_w >> 16;
+	src_h = state->src_h >> 16;
 
 	if (src_w < STI_CURS_MIN_SIZE ||
 	    src_h < STI_CURS_MIN_SIZE ||
@@ -146,7 +216,7 @@ static void sti_cursor_atomic_update(struct drm_plane *drm_plane,
 	    src_h > STI_CURS_MAX_SIZE) {
 		DRM_ERROR("Invalid cursor size (%dx%d)\n",
 				src_w, src_h);
-		return;
+		return -EINVAL;
 	}
 
 	/* If the cursor size has changed, re-allocated the pixmap */
@@ -170,16 +240,46 @@ static void sti_cursor_atomic_update(struct drm_plane *drm_plane,
 							GFP_KERNEL | GFP_DMA);
 		if (!cursor->pixmap.base) {
 			DRM_ERROR("Failed to allocate memory for pixmap\n");
-			return;
+			return -EINVAL;
 		}
 	}
 
-	cma_obj = drm_fb_cma_get_gem_obj(fb, 0);
-	if (!cma_obj) {
+	if (!drm_fb_cma_get_gem_obj(fb, 0)) {
 		DRM_ERROR("Can't get CMA GEM object for fb\n");
-		return;
+		return -EINVAL;
 	}
 
+	DRM_DEBUG_KMS("CRTC:%d (%s) drm plane:%d (%s)\n",
+		      crtc->base.id, sti_mixer_to_str(to_sti_mixer(crtc)),
+		      drm_plane->base.id, sti_plane_to_str(plane));
+	DRM_DEBUG_KMS("(%dx%d)@(%d,%d)\n", dst_w, dst_h, dst_x, dst_y);
+
+	return 0;
+}
+
+static void sti_cursor_atomic_update(struct drm_plane *drm_plane,
+				     struct drm_plane_state *oldstate)
+{
+	struct drm_plane_state *state = drm_plane->state;
+	struct sti_plane *plane = to_sti_plane(drm_plane);
+	struct sti_cursor *cursor = to_sti_cursor(plane);
+	struct drm_crtc *crtc = state->crtc;
+	struct drm_framebuffer *fb = state->fb;
+	struct drm_display_mode *mode;
+	int dst_x, dst_y;
+	struct drm_gem_cma_object *cma_obj;
+	u32 y, x;
+	u32 val;
+
+	if (!crtc || !fb)
+		return;
+
+	mode = &crtc->mode;
+	dst_x = state->crtc_x;
+	dst_y = state->crtc_y;
+
+	cma_obj = drm_fb_cma_get_gem_obj(fb, 0);
+
 	/* Convert ARGB8888 to CLUT8 */
 	sti_cursor_argb8888_to_clut8(cursor, (u32 *)cma_obj->vaddr);
 
@@ -193,21 +293,21 @@ static void sti_cursor_atomic_update(struct drm_plane *drm_plane,
 	val = y << 16 | x;
 	writel(val, cursor->regs + CUR_AWE);
 
-	if (first_prepare) {
-		/* Set and fetch CLUT */
-		writel(cursor->clut_paddr, cursor->regs + CUR_CML);
-		writel(CUR_CTL_CLUT_UPDATE, cursor->regs + CUR_CTL);
-	}
-
 	/* Set memory location, size, and position */
 	writel(cursor->pixmap.paddr, cursor->regs + CUR_PML);
 	writel(cursor->width, cursor->regs + CUR_PMP);
 	writel(cursor->height << 16 | cursor->width, cursor->regs + CUR_SIZE);
 
 	y = sti_vtg_get_line_number(*mode, dst_y);
-	x = sti_vtg_get_pixel_number(*mode, dst_y);
+	x = sti_vtg_get_pixel_number(*mode, dst_x);
 	writel((y << 16) | x, cursor->regs + CUR_VPO);
 
+	/* Set and fetch CLUT */
+	writel(cursor->clut_paddr, cursor->regs + CUR_CML);
+	writel(CUR_CTL_CLUT_UPDATE, cursor->regs + CUR_CTL);
+
+	sti_plane_update_fps(plane, true, false);
+
 	plane->status = STI_PLANE_UPDATED;
 }
 
@@ -215,7 +315,6 @@ static void sti_cursor_atomic_disable(struct drm_plane *drm_plane,
 				      struct drm_plane_state *oldstate)
 {
 	struct sti_plane *plane = to_sti_plane(drm_plane);
-	struct sti_mixer *mixer = to_sti_mixer(drm_plane->crtc);
 
 	if (!drm_plane->crtc) {
 		DRM_DEBUG_DRIVER("drm plane:%d not enabled\n",
@@ -224,13 +323,15 @@ static void sti_cursor_atomic_disable(struct drm_plane *drm_plane,
 	}
 
 	DRM_DEBUG_DRIVER("CRTC:%d (%s) drm plane:%d (%s)\n",
-			 drm_plane->crtc->base.id, sti_mixer_to_str(mixer),
+			 drm_plane->crtc->base.id,
+			 sti_mixer_to_str(to_sti_mixer(drm_plane->crtc)),
 			 drm_plane->base.id, sti_plane_to_str(plane));
 
 	plane->status = STI_PLANE_DISABLING;
 }
 
 static const struct drm_plane_helper_funcs sti_cursor_helpers_funcs = {
+	.atomic_check = sti_cursor_atomic_check,
 	.atomic_update = sti_cursor_atomic_update,
 	.atomic_disable = sti_cursor_atomic_disable,
 };
@@ -283,6 +384,9 @@ struct drm_plane *sti_cursor_create(struct drm_device *drm_dev,
 
 	sti_plane_init_property(&cursor->plane, DRM_PLANE_TYPE_CURSOR);
 
+	if (cursor_debugfs_init(cursor, drm_dev->primary))
+		DRM_ERROR("CURSOR debugfs setup failed\n");
+
 	return &cursor->plane.drm_plane;
 
 err_plane:

drivers/gpu/drm/sti/sti_drv.c

@@ -20,6 +20,7 @@
 
 #include "sti_crtc.h"
 #include "sti_drv.h"
+#include "sti_plane.h"
 
 #define DRIVER_NAME	"sti"
 #define DRIVER_DESC	"STMicroelectronics SoC DRM"
@@ -30,6 +31,130 @@
 #define STI_MAX_FB_HEIGHT	4096
 #define STI_MAX_FB_WIDTH	4096
 
+static int sti_drm_fps_get(void *data, u64 *val)
+{
+	struct drm_device *drm_dev = data;
+	struct drm_plane *p;
+	unsigned int i = 0;
+
+	*val = 0;
+	list_for_each_entry(p, &drm_dev->mode_config.plane_list, head) {
+		struct sti_plane *plane = to_sti_plane(p);
+
+		*val |= plane->fps_info.output << i;
+		i++;
+	}
+
+	return 0;
+}
+
+static int sti_drm_fps_set(void *data, u64 val)
+{
+	struct drm_device *drm_dev = data;
+	struct drm_plane *p;
+	unsigned int i = 0;
+
+	list_for_each_entry(p, &drm_dev->mode_config.plane_list, head) {
+		struct sti_plane *plane = to_sti_plane(p);
+
+		plane->fps_info.output = (val >> i) & 1;
+		i++;
+	}
+
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(sti_drm_fps_fops,
+			sti_drm_fps_get, sti_drm_fps_set, "%llu\n");
+
+static int sti_drm_fps_dbg_show(struct seq_file *s, void *data)
+{
+	struct drm_info_node *node = s->private;
+	struct drm_device *dev = node->minor->dev;
+	struct drm_plane *p;
+	int ret;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	list_for_each_entry(p, &dev->mode_config.plane_list, head) {
+		struct sti_plane *plane = to_sti_plane(p);
+
+		seq_printf(s, "%s%s\n",
+			   plane->fps_info.fps_str,
+			   plane->fps_info.fips_str);
+	}
+
+	mutex_unlock(&dev->struct_mutex);
+	return 0;
+}
+
+static struct drm_info_list sti_drm_dbg_list[] = {
+	{"fps_get", sti_drm_fps_dbg_show, 0},
+};
+
+static int sti_drm_debugfs_create(struct dentry *root,
+				  struct drm_minor *minor,
+				  const char *name,
+				  const struct file_operations *fops)
+{
+	struct drm_device *dev = minor->dev;
+	struct drm_info_node *node;
+	struct dentry *ent;
+
+	ent = debugfs_create_file(name, S_IRUGO | S_IWUSR, root, dev, fops);
+	if (IS_ERR(ent))
+		return PTR_ERR(ent);
+
+	node = kmalloc(sizeof(*node), GFP_KERNEL);
+	if (!node) {
+		debugfs_remove(ent);
+		return -ENOMEM;
+	}
+
+	node->minor = minor;
+	node->dent = ent;
+	node->info_ent = (void *)fops;
+
+	mutex_lock(&minor->debugfs_lock);
+	list_add(&node->list, &minor->debugfs_list);
+	mutex_unlock(&minor->debugfs_lock);
+
+	return 0;
+}
+
+static int sti_drm_dbg_init(struct drm_minor *minor)
+{
+	int ret;
+
+	ret = drm_debugfs_create_files(sti_drm_dbg_list,
+				       ARRAY_SIZE(sti_drm_dbg_list),
+				       minor->debugfs_root, minor);
+	if (ret)
+		goto err;
+
+	ret = sti_drm_debugfs_create(minor->debugfs_root, minor, "fps_show",
+				     &sti_drm_fps_fops);
+	if (ret)
+		goto err;
+
+	DRM_INFO("%s: debugfs installed\n", DRIVER_NAME);
+	return 0;
+err:
+	DRM_ERROR("%s: cannot install debugfs\n", DRIVER_NAME);
+	return ret;
+}
+
+void sti_drm_dbg_cleanup(struct drm_minor *minor)
+{
+	drm_debugfs_remove_files(sti_drm_dbg_list,
+				 ARRAY_SIZE(sti_drm_dbg_list), minor);
+
+	drm_debugfs_remove_files((struct drm_info_list *)&sti_drm_fps_fops,
+				 1, minor);
+}
+
 static void sti_atomic_schedule(struct sti_private *private,
 				struct drm_atomic_state *state)
 {
@@ -181,18 +306,9 @@ static const struct file_operations sti_driver_fops = {
 	.release = drm_release,
 };
 
-static struct dma_buf *sti_gem_prime_export(struct drm_device *dev,
-					    struct drm_gem_object *obj,
-					    int flags)
-{
-	/* we want to be able to write in mmapped buffer */
-	flags |= O_RDWR;
-	return drm_gem_prime_export(dev, obj, flags);
-}
-
 static struct drm_driver sti_driver = {
 	.driver_features = DRIVER_HAVE_IRQ | DRIVER_MODESET |
-	    DRIVER_GEM | DRIVER_PRIME,
+	    DRIVER_GEM | DRIVER_PRIME | DRIVER_ATOMIC,
 	.load = sti_load,
 	.gem_free_object = drm_gem_cma_free_object,
 	.gem_vm_ops = &drm_gem_cma_vm_ops,
@@ -207,7 +323,7 @@ static struct drm_driver sti_driver = {
 
 	.prime_handle_to_fd = drm_gem_prime_handle_to_fd,
 	.prime_fd_to_handle = drm_gem_prime_fd_to_handle,
-	.gem_prime_export = sti_gem_prime_export,
+	.gem_prime_export = drm_gem_prime_export,
 	.gem_prime_import = drm_gem_prime_import,
 	.gem_prime_get_sg_table = drm_gem_cma_prime_get_sg_table,
 	.gem_prime_import_sg_table = drm_gem_cma_prime_import_sg_table,
@@ -215,6 +331,9 @@ static struct drm_driver sti_driver = {
 	.gem_prime_vunmap = drm_gem_cma_prime_vunmap,
 	.gem_prime_mmap = drm_gem_cma_prime_mmap,
 
+	.debugfs_init = sti_drm_dbg_init,
+	.debugfs_cleanup = sti_drm_dbg_cleanup,
+
 	.name = DRIVER_NAME,
 	.desc = DRIVER_DESC,
 	.date = DRIVER_DATE,

drivers/gpu/drm/sti/sti_dvo.c

@@ -6,6 +6,7 @@
 
 #include <linux/clk.h>
 #include <linux/component.h>
+#include <linux/debugfs.h>
 #include <linux/module.h>
 #include <linux/of_gpio.h>
 #include <linux/platform_device.h>
@@ -156,6 +157,69 @@ static void dvo_awg_configure(struct sti_dvo *dvo, u32 *awg_ram_code, int nb)
 	writel(DVO_AWG_CTRL_EN, dvo->regs + DVO_AWG_DIGSYNC_CTRL);
 }
 
+#define DBGFS_DUMP(reg) seq_printf(s, "\n  %-25s 0x%08X", #reg, \
+				   readl(dvo->regs + reg))
+
+static void dvo_dbg_awg_microcode(struct seq_file *s, void __iomem *reg)
+{
+	unsigned int i;
+
+	seq_puts(s, "\n\n");
+	seq_puts(s, "  DVO AWG microcode:");
+	for (i = 0; i < AWG_MAX_INST; i++) {
+		if (i % 8 == 0)
+			seq_printf(s, "\n  %04X:", i);
+		seq_printf(s, " %04X", readl(reg + i * 4));
+	}
+}
+
+static int dvo_dbg_show(struct seq_file *s, void *data)
+{
+	struct drm_info_node *node = s->private;
+	struct sti_dvo *dvo = (struct sti_dvo *)node->info_ent->data;
+	struct drm_device *dev = node->minor->dev;
+	int ret;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	seq_printf(s, "DVO: (vaddr = 0x%p)", dvo->regs);
+	DBGFS_DUMP(DVO_AWG_DIGSYNC_CTRL);
+	DBGFS_DUMP(DVO_DOF_CFG);
+	DBGFS_DUMP(DVO_LUT_PROG_LOW);
+	DBGFS_DUMP(DVO_LUT_PROG_MID);
+	DBGFS_DUMP(DVO_LUT_PROG_HIGH);
+	dvo_dbg_awg_microcode(s, dvo->regs + DVO_DIGSYNC_INSTR_I);
+	seq_puts(s, "\n");
+
+	mutex_unlock(&dev->struct_mutex);
+	return 0;
+}
+
+static struct drm_info_list dvo_debugfs_files[] = {
+	{ "dvo", dvo_dbg_show, 0, NULL },
+};
+
+static void dvo_debugfs_exit(struct sti_dvo *dvo, struct drm_minor *minor)
+{
+	drm_debugfs_remove_files(dvo_debugfs_files,
+				 ARRAY_SIZE(dvo_debugfs_files),
+				 minor);
+}
+
+static int dvo_debugfs_init(struct sti_dvo *dvo, struct drm_minor *minor)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(dvo_debugfs_files); i++)
+		dvo_debugfs_files[i].data = dvo;
+
+	return drm_debugfs_create_files(dvo_debugfs_files,
+					ARRAY_SIZE(dvo_debugfs_files),
+					minor->debugfs_root, minor);
+}
+
 static void sti_dvo_disable(struct drm_bridge *bridge)
 {
 	struct sti_dvo *dvo = bridge->driver_private;
@@ -345,12 +409,14 @@ sti_dvo_connector_detect(struct drm_connector *connector, bool force)
 
 	DRM_DEBUG_DRIVER("\n");
 
-	if (!dvo->panel)
+	if (!dvo->panel) {
 		dvo->panel = of_drm_find_panel(dvo->panel_node);
+		if (dvo->panel)
+			drm_panel_attach(dvo->panel, connector);
+	}
 
 	if (dvo->panel)
-		if (!drm_panel_attach(dvo->panel, connector))
-			return connector_status_connected;
+		return connector_status_connected;
 
 	return connector_status_disconnected;
 }
@@ -453,6 +519,9 @@ static int sti_dvo_bind(struct device *dev, struct device *master, void *data)
 		goto err_sysfs;
 	}
 
+	if (dvo_debugfs_init(dvo, drm_dev->primary))
+		DRM_ERROR("DVO debugfs setup failed\n");
+
 	return 0;
 
 err_sysfs:
@@ -467,6 +536,9 @@ static void sti_dvo_unbind(struct device *dev,
 			   struct device *master, void *data)
 {
 	struct sti_dvo *dvo = dev_get_drvdata(dev);
+	struct drm_device *drm_dev = data;
+
+	dvo_debugfs_exit(dvo, drm_dev->primary);
 
 	drm_bridge_remove(dvo->bridge);
 }

drivers/gpu/drm/sti/sti_hda.c

@@ -326,6 +326,103 @@ static void hda_enable_hd_dacs(struct sti_hda *hda, bool enable)
 	}
 }
 
+#define DBGFS_DUMP(reg) seq_printf(s, "\n  %-25s 0x%08X", #reg, \
+				   readl(hda->regs + reg))
+
+static void hda_dbg_cfg(struct seq_file *s, int val)
+{
+	seq_puts(s, "\tAWG ");
+	seq_puts(s, val & CFG_AWG_ASYNC_EN ? "enabled" : "disabled");
+}
+
+static void hda_dbg_awg_microcode(struct seq_file *s, void __iomem *reg)
+{
+	unsigned int i;
+
+	seq_puts(s, "\n\n");
+	seq_puts(s, "  HDA AWG microcode:");
+	for (i = 0; i < AWG_MAX_INST; i++) {
+		if (i % 8 == 0)
+			seq_printf(s, "\n  %04X:", i);
+		seq_printf(s, " %04X", readl(reg + i * 4));
+	}
+}
+
+static void hda_dbg_video_dacs_ctrl(struct seq_file *s, void __iomem *reg)
+{
+	u32 val = readl(reg);
+	u32 mask;
+
+	switch ((u32)reg & VIDEO_DACS_CONTROL_MASK) {
+	case VIDEO_DACS_CONTROL_SYSCFG2535:
+		mask = DAC_CFG_HD_OFF_MASK;
+		break;
+	case VIDEO_DACS_CONTROL_SYSCFG5072:
+		mask = DAC_CFG_HD_HZUVW_OFF_MASK;
+		break;
+	default:
+		DRM_DEBUG_DRIVER("Warning: DACS ctrl register not supported!");
+		return;
+	}
+
+	seq_puts(s, "\n");
+	seq_printf(s, "\n  %-25s 0x%08X", "VIDEO_DACS_CONTROL", val);
+	seq_puts(s, "\tHD DACs ");
+	seq_puts(s, val & mask ? "disabled" : "enabled");
+}
+
+static int hda_dbg_show(struct seq_file *s, void *data)
+{
+	struct drm_info_node *node = s->private;
+	struct sti_hda *hda = (struct sti_hda *)node->info_ent->data;
+	struct drm_device *dev = node->minor->dev;
+	int ret;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	seq_printf(s, "HD Analog: (vaddr = 0x%p)", hda->regs);
+	DBGFS_DUMP(HDA_ANA_CFG);
+	hda_dbg_cfg(s, readl(hda->regs + HDA_ANA_CFG));
+	DBGFS_DUMP(HDA_ANA_SCALE_CTRL_Y);
+	DBGFS_DUMP(HDA_ANA_SCALE_CTRL_CB);
+	DBGFS_DUMP(HDA_ANA_SCALE_CTRL_CR);
+	DBGFS_DUMP(HDA_ANA_ANC_CTRL);
+	DBGFS_DUMP(HDA_ANA_SRC_Y_CFG);
+	DBGFS_DUMP(HDA_ANA_SRC_C_CFG);
+	hda_dbg_awg_microcode(s, hda->regs + HDA_SYNC_AWGI);
+	if (hda->video_dacs_ctrl)
+		hda_dbg_video_dacs_ctrl(s, hda->video_dacs_ctrl);
+	seq_puts(s, "\n");
+
+	mutex_unlock(&dev->struct_mutex);
+	return 0;
+}
+
+static struct drm_info_list hda_debugfs_files[] = {
+	{ "hda", hda_dbg_show, 0, NULL },
+};
+
+static void hda_debugfs_exit(struct sti_hda *hda, struct drm_minor *minor)
+{
+	drm_debugfs_remove_files(hda_debugfs_files,
+				 ARRAY_SIZE(hda_debugfs_files),
+				 minor);
+}
+
+static int hda_debugfs_init(struct sti_hda *hda, struct drm_minor *minor)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(hda_debugfs_files); i++)
+		hda_debugfs_files[i].data = hda;
+
+	return drm_debugfs_create_files(hda_debugfs_files,
+					ARRAY_SIZE(hda_debugfs_files),
+					minor->debugfs_root, minor);
+}
+
 /**
  * Configure AWG, writing instructions
  *
@@ -685,6 +782,12 @@ static int sti_hda_bind(struct device *dev, struct device *master, void *data)
 		goto err_sysfs;
 	}
 
+	/* force to disable hd dacs at startup */
+	hda_enable_hd_dacs(hda, false);
+
+	if (hda_debugfs_init(hda, drm_dev->primary))
+		DRM_ERROR("HDA debugfs setup failed\n");
+
 	return 0;
 
 err_sysfs:
@@ -697,7 +800,10 @@ static int sti_hda_bind(struct device *dev, struct device *master, void *data)
 static void sti_hda_unbind(struct device *dev,
 		struct device *master, void *data)
 {
-	/* do nothing */
+	struct sti_hda *hda = dev_get_drvdata(dev);
+	struct drm_device *drm_dev = data;
+
+	hda_debugfs_exit(hda, drm_dev->primary);
 }
 
 static const struct component_ops sti_hda_ops = {

drivers/gpu/drm/sti/sti_hdmi.h

@@ -7,15 +7,14 @@
 #ifndef _STI_HDMI_H_
 #define _STI_HDMI_H_
 
+#include <linux/hdmi.h>
 #include <linux/platform_device.h>
 
 #include <drm/drmP.h>
 
 #define HDMI_STA           0x0010
 #define HDMI_STA_DLL_LCK   BIT(5)
-
-#define HDMI_STA_HOT_PLUG_SHIFT 4
-#define HDMI_STA_HOT_PLUG	(1 << HDMI_STA_HOT_PLUG_SHIFT)
+#define HDMI_STA_HOT_PLUG  BIT(4)
 
 struct sti_hdmi;
 
@@ -24,6 +23,27 @@ struct hdmi_phy_ops {
 	void (*stop)(struct sti_hdmi *hdmi);
 };
 
+/* values for the framing mode property */
+enum sti_hdmi_modes {
+	HDMI_MODE_HDMI,
+	HDMI_MODE_DVI,
+};
+
+static const struct drm_prop_enum_list hdmi_mode_names[] = {
+	{ HDMI_MODE_HDMI, "hdmi" },
+	{ HDMI_MODE_DVI, "dvi" },
+};
+
+#define DEFAULT_HDMI_MODE HDMI_MODE_HDMI
+
+static const struct drm_prop_enum_list colorspace_mode_names[] = {
+	{ HDMI_COLORSPACE_RGB, "rgb" },
+	{ HDMI_COLORSPACE_YUV422, "yuv422" },
+	{ HDMI_COLORSPACE_YUV444, "yuv444" },
+};
+
+#define DEFAULT_COLORSPACE_MODE HDMI_COLORSPACE_RGB
+
 /**
  * STI hdmi structure
  *
@@ -44,6 +64,9 @@ struct hdmi_phy_ops {
  * @wait_event: wait event
  * @event_received: wait event status
  * @reset: reset control of the hdmi phy
+ * @ddc_adapt: i2c ddc adapter
+ * @colorspace: current colorspace selected
+ * @hdmi_mode: select framing for HDMI or DVI
  */
 struct sti_hdmi {
 	struct device dev;
@@ -64,6 +87,8 @@ struct sti_hdmi {
 	bool event_received;
 	struct reset_control *reset;
 	struct i2c_adapter *ddc_adapt;
+	enum hdmi_colorspace colorspace;
+	enum sti_hdmi_modes hdmi_mode;
 };
 
 u32 hdmi_read(struct sti_hdmi *hdmi, int offset);

drivers/gpu/drm/sti/sti_mixer.c

@@ -75,6 +75,145 @@ static inline void sti_mixer_reg_write(struct sti_mixer *mixer,
 	writel(val, mixer->regs + reg_id);
 }
 
+#define DBGFS_DUMP(reg) seq_printf(s, "\n  %-25s 0x%08X", #reg, \
+				   sti_mixer_reg_read(mixer, reg))
+
+static void mixer_dbg_ctl(struct seq_file *s, int val)
+{
+	unsigned int i;
+	int count = 0;
+	char *const disp_layer[] = {"BKG", "VID0", "VID1", "GDP0",
+				    "GDP1", "GDP2", "GDP3"};
+
+	seq_puts(s, "\tEnabled: ");
+	for (i = 0; i < 7; i++) {
+		if (val & 1) {
+			seq_printf(s, "%s ", disp_layer[i]);
+			count++;
+		}
+		val = val >> 1;
+	}
+
+	val = val >> 2;
+	if (val & 1) {
+		seq_puts(s, "CURS ");
+		count++;
+	}
+	if (!count)
+		seq_puts(s, "Nothing");
+}
+
+static void mixer_dbg_crb(struct seq_file *s, int val)
+{
+	int i;
+
+	seq_puts(s, "\tDepth: ");
+	for (i = 0; i < GAM_MIXER_NB_DEPTH_LEVEL; i++) {
+		switch (val & GAM_DEPTH_MASK_ID) {
+		case GAM_DEPTH_VID0_ID:
+			seq_puts(s, "VID0");
+			break;
+		case GAM_DEPTH_VID1_ID:
+			seq_puts(s, "VID1");
+			break;
+		case GAM_DEPTH_GDP0_ID:
+			seq_puts(s, "GDP0");
+			break;
+		case GAM_DEPTH_GDP1_ID:
+			seq_puts(s, "GDP1");
+			break;
+		case GAM_DEPTH_GDP2_ID:
+			seq_puts(s, "GDP2");
+			break;
+		case GAM_DEPTH_GDP3_ID:
+			seq_puts(s, "GDP3");
+			break;
+		default:
+			seq_puts(s, "---");
+		}
+
+		if (i < GAM_MIXER_NB_DEPTH_LEVEL - 1)
+			seq_puts(s, " < ");
+		val = val >> 3;
+	}
+}
+
+static void mixer_dbg_mxn(struct seq_file *s, void *addr)
+{
+	int i;
+
+	for (i = 1; i < 8; i++)
+		seq_printf(s, "-0x%08X", (int)readl(addr + i * 4));
+}
+
+static int mixer_dbg_show(struct seq_file *s, void *arg)
+{
+	struct drm_info_node *node = s->private;
+	struct sti_mixer *mixer = (struct sti_mixer *)node->info_ent->data;
+	struct drm_device *dev = node->minor->dev;
+	int ret;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	seq_printf(s, "%s: (vaddr = 0x%p)",
+		   sti_mixer_to_str(mixer), mixer->regs);
+
+	DBGFS_DUMP(GAM_MIXER_CTL);
+	mixer_dbg_ctl(s, sti_mixer_reg_read(mixer, GAM_MIXER_CTL));
+	DBGFS_DUMP(GAM_MIXER_BKC);
+	DBGFS_DUMP(GAM_MIXER_BCO);
+	DBGFS_DUMP(GAM_MIXER_BCS);
+	DBGFS_DUMP(GAM_MIXER_AVO);
+	DBGFS_DUMP(GAM_MIXER_AVS);
+	DBGFS_DUMP(GAM_MIXER_CRB);
+	mixer_dbg_crb(s, sti_mixer_reg_read(mixer, GAM_MIXER_CRB));
+	DBGFS_DUMP(GAM_MIXER_ACT);
+	DBGFS_DUMP(GAM_MIXER_MBP);
+	DBGFS_DUMP(GAM_MIXER_MX0);
+	mixer_dbg_mxn(s, mixer->regs + GAM_MIXER_MX0);
+	seq_puts(s, "\n");
+
+	mutex_unlock(&dev->struct_mutex);
+	return 0;
+}
+
+static struct drm_info_list mixer0_debugfs_files[] = {
+	{ "mixer_main", mixer_dbg_show, 0, NULL },
+};
+
+static struct drm_info_list mixer1_debugfs_files[] = {
+	{ "mixer_aux", mixer_dbg_show, 0, NULL },
+};
+
+static int mixer_debugfs_init(struct sti_mixer *mixer, struct drm_minor *minor)
+{
+	unsigned int i;
+	struct drm_info_list *mixer_debugfs_files;
+	int nb_files;
+
+	switch (mixer->id) {
+	case STI_MIXER_MAIN:
+		mixer_debugfs_files = mixer0_debugfs_files;
+		nb_files = ARRAY_SIZE(mixer0_debugfs_files);
+		break;
+	case STI_MIXER_AUX:
+		mixer_debugfs_files = mixer1_debugfs_files;
+		nb_files = ARRAY_SIZE(mixer1_debugfs_files);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	for (i = 0; i < nb_files; i++)
+		mixer_debugfs_files[i].data = mixer;
+
+	return drm_debugfs_create_files(mixer_debugfs_files,
+					nb_files,
+					minor->debugfs_root, minor);
+}
+
 void sti_mixer_set_background_status(struct sti_mixer *mixer, bool enable)
 {
 	u32 val = sti_mixer_reg_read(mixer, GAM_MIXER_CTL);
@@ -237,7 +376,9 @@ void sti_mixer_set_matrix(struct sti_mixer *mixer)
 				    mixerColorSpaceMatIdentity[i]);
 }
 
-struct sti_mixer *sti_mixer_create(struct device *dev, int id,
+struct sti_mixer *sti_mixer_create(struct device *dev,
+				   struct drm_device *drm_dev,
+				   int id,
 				   void __iomem *baseaddr)
 {
 	struct sti_mixer *mixer = devm_kzalloc(dev, sizeof(*mixer), GFP_KERNEL);
@@ -258,5 +399,8 @@ struct sti_mixer *sti_mixer_create(struct device *dev, int id,
 	DRM_DEBUG_DRIVER("%s created. Regs=%p\n",
 			 sti_mixer_to_str(mixer), mixer->regs);
 
+	if (mixer_debugfs_init(mixer, drm_dev->primary))
+		DRM_ERROR("MIXER debugfs setup failed\n");
+
 	return mixer;
 }

drivers/gpu/drm/sti/sti_mixer.h

@@ -42,7 +42,9 @@ struct sti_mixer {
 
 const char *sti_mixer_to_str(struct sti_mixer *mixer);
 
-struct sti_mixer *sti_mixer_create(struct device *dev, int id,
+struct sti_mixer *sti_mixer_create(struct device *dev,
+				   struct drm_device *drm_dev,
+				   int id,
 				   void __iomem *baseaddr);
 
 int sti_mixer_set_plane_status(struct sti_mixer *mixer,

drivers/gpu/drm/sti/sti_plane.c

@@ -43,6 +43,69 @@ const char *sti_plane_to_str(struct sti_plane *plane)
 	}
 }
 
+#define STI_FPS_INTERVAL_MS     3000
+
+static int sti_plane_timespec_ms_diff(struct timespec lhs, struct timespec rhs)
+{
+	struct timespec tmp_ts = timespec_sub(lhs, rhs);
+	u64 tmp_ns = (u64)timespec_to_ns(&tmp_ts);
+
+	do_div(tmp_ns, NSEC_PER_MSEC);
+
+	return (u32)tmp_ns;
+}
+
+void sti_plane_update_fps(struct sti_plane *plane,
+			  bool new_frame,
+			  bool new_field)
+{
+	struct timespec now;
+	struct sti_fps_info *fps;
+	int fpks, fipks, ms_since_last, num_frames, num_fields;
+
+	getrawmonotonic(&now);
+
+	/* Compute number of frame updates */
+	fps = &plane->fps_info;
+
+	if (new_field)
+		fps->curr_field_counter++;
+
+	/* do not perform fps calcul if new_frame is false */
+	if (!new_frame)
+		return;
+
+	fps->curr_frame_counter++;
+	ms_since_last = sti_plane_timespec_ms_diff(now, fps->last_timestamp);
+	num_frames = fps->curr_frame_counter - fps->last_frame_counter;
+
+	if (num_frames <= 0  || ms_since_last < STI_FPS_INTERVAL_MS)
+		return;
+
+	fps->last_timestamp = now;
+	fps->last_frame_counter = fps->curr_frame_counter;
+	fpks = (num_frames * 1000000) / ms_since_last;
+	snprintf(plane->fps_info.fps_str, FPS_LENGTH, "%-6s @ %d.%.3d fps",
+		 sti_plane_to_str(plane), fpks / 1000, fpks % 1000);
+
+	if (fps->curr_field_counter) {
+		/* Compute number of field updates */
+		num_fields = fps->curr_field_counter - fps->last_field_counter;
+		fps->last_field_counter = fps->curr_field_counter;
+		fipks = (num_fields * 1000000) / ms_since_last;
+		snprintf(plane->fps_info.fips_str,
+			 FPS_LENGTH, " - %d.%.3d field/sec",
+			 fipks / 1000, fipks % 1000);
+	} else {
+		plane->fps_info.fips_str[0] = '\0';
+	}
+
+	if (fps->output)
+		DRM_INFO("%s%s\n",
+			 plane->fps_info.fps_str,
+			 plane->fps_info.fips_str);
+}
+
 static void sti_plane_destroy(struct drm_plane *drm_plane)
 {
 	DRM_DEBUG_DRIVER("\n");

drivers/gpu/drm/sti/sti_plane.h

@@ -50,6 +50,18 @@ enum sti_plane_status {
 	STI_PLANE_DISABLED,
 };
 
+#define FPS_LENGTH 64
+struct sti_fps_info {
+	bool output;
+	unsigned int curr_frame_counter;
+	unsigned int last_frame_counter;
+	unsigned int curr_field_counter;
+	unsigned int last_field_counter;
+	struct timespec last_timestamp;
+	char fps_str[FPS_LENGTH];
+	char fips_str[FPS_LENGTH];
+};
+
 /**
  * STI plane structure
  *
@@ -57,15 +69,20 @@ enum sti_plane_status {
  * @desc:               plane type & id
  * @status:             to know the status of the plane
  * @zorder:             plane z-order
+ * @fps_info:           frame per second info
  */
 struct sti_plane {
 	struct drm_plane drm_plane;
 	enum sti_plane_desc desc;
 	enum sti_plane_status status;
 	int zorder;
+	struct sti_fps_info fps_info;
 };
 
 const char *sti_plane_to_str(struct sti_plane *plane);
+void sti_plane_update_fps(struct sti_plane *plane,
+			  bool new_frame,
+			  bool new_field);
 void sti_plane_init_property(struct sti_plane *plane,
 			     enum drm_plane_type type);
 #endif

drivers/gpu/drm/sti/sti_vid.c

@@ -42,6 +42,104 @@
 #define VID_MPR1_BT709          0x0AC50000
 #define VID_MPR2_BT709          0x07150545
 #define VID_MPR3_BT709          0x00000AE8
+/* YCbCr to RGB BT709:
+ * R = Y+1.3711Cr
+ * G = Y-0.6992Cr-0.3359Cb
+ * B = Y+1.7344Cb
+ */
+#define VID_MPR0_BT601          0x0A800000
+#define VID_MPR1_BT601          0x0AAF0000
+#define VID_MPR2_BT601          0x094E0754
+#define VID_MPR3_BT601          0x00000ADD
+
+#define VID_MIN_HD_HEIGHT       720
+
+#define DBGFS_DUMP(reg) seq_printf(s, "\n  %-25s 0x%08X", #reg, \
+				   readl(vid->regs + reg))
+
+static void vid_dbg_ctl(struct seq_file *s, int val)
+{
+	val = val >> 30;
+	seq_puts(s, "\t");
+
+	if (!(val & 1))
+		seq_puts(s, "NOT ");
+	seq_puts(s, "ignored on main mixer - ");
+
+	if (!(val & 2))
+		seq_puts(s, "NOT ");
+	seq_puts(s, "ignored on aux mixer");
+}
+
+static void vid_dbg_vpo(struct seq_file *s, int val)
+{
+	seq_printf(s, "\txdo:%4d\tydo:%4d", val & 0x0FFF, (val >> 16) & 0x0FFF);
+}
+
+static void vid_dbg_vps(struct seq_file *s, int val)
+{
+	seq_printf(s, "\txds:%4d\tyds:%4d", val & 0x0FFF, (val >> 16) & 0x0FFF);
+}
+
+static void vid_dbg_mst(struct seq_file *s, int val)
+{
+	if (val & 1)
+		seq_puts(s, "\tBUFFER UNDERFLOW!");
+}
+
+static int vid_dbg_show(struct seq_file *s, void *arg)
+{
+	struct drm_info_node *node = s->private;
+	struct sti_vid *vid = (struct sti_vid *)node->info_ent->data;
+	struct drm_device *dev = node->minor->dev;
+	int ret;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	seq_printf(s, "VID: (vaddr= 0x%p)", vid->regs);
+
+	DBGFS_DUMP(VID_CTL);
+	vid_dbg_ctl(s, readl(vid->regs + VID_CTL));
+	DBGFS_DUMP(VID_ALP);
+	DBGFS_DUMP(VID_CLF);
+	DBGFS_DUMP(VID_VPO);
+	vid_dbg_vpo(s, readl(vid->regs + VID_VPO));
+	DBGFS_DUMP(VID_VPS);
+	vid_dbg_vps(s, readl(vid->regs + VID_VPS));
+	DBGFS_DUMP(VID_KEY1);
+	DBGFS_DUMP(VID_KEY2);
+	DBGFS_DUMP(VID_MPR0);
+	DBGFS_DUMP(VID_MPR1);
+	DBGFS_DUMP(VID_MPR2);
+	DBGFS_DUMP(VID_MPR3);
+	DBGFS_DUMP(VID_MST);
+	vid_dbg_mst(s, readl(vid->regs + VID_MST));
+	DBGFS_DUMP(VID_BC);
+	DBGFS_DUMP(VID_TINT);
+	DBGFS_DUMP(VID_CSAT);
+	seq_puts(s, "\n");
+
+	mutex_unlock(&dev->struct_mutex);
+	return 0;
+}
+
+static struct drm_info_list vid_debugfs_files[] = {
+	{ "vid", vid_dbg_show, 0, NULL },
+};
+
+static int vid_debugfs_init(struct sti_vid *vid, struct drm_minor *minor)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(vid_debugfs_files); i++)
+		vid_debugfs_files[i].data = vid;
+
+	return drm_debugfs_create_files(vid_debugfs_files,
+					ARRAY_SIZE(vid_debugfs_files),
+					minor->debugfs_root, minor);
+}
 
 void sti_vid_commit(struct sti_vid *vid,
 		    struct drm_plane_state *state)
@@ -52,6 +150,7 @@ void sti_vid_commit(struct sti_vid *vid,
 	int dst_y = state->crtc_y;
 	int dst_w = clamp_val(state->crtc_w, 0, mode->crtc_hdisplay - dst_x);
 	int dst_h = clamp_val(state->crtc_h, 0, mode->crtc_vdisplay - dst_y);
+	int src_h = state->src_h >> 16;
 	u32 val, ydo, xdo, yds, xds;
 
 	/* Input / output size
@@ -71,6 +170,19 @@ void sti_vid_commit(struct sti_vid *vid,
 
 	writel((ydo << 16) | xdo, vid->regs + VID_VPO);
 	writel((yds << 16) | xds, vid->regs + VID_VPS);
+
+	/* Color conversion parameters */
+	if (src_h >= VID_MIN_HD_HEIGHT) {
+		writel(VID_MPR0_BT709, vid->regs + VID_MPR0);
+		writel(VID_MPR1_BT709, vid->regs + VID_MPR1);
+		writel(VID_MPR2_BT709, vid->regs + VID_MPR2);
+		writel(VID_MPR3_BT709, vid->regs + VID_MPR3);
+	} else {
+		writel(VID_MPR0_BT601, vid->regs + VID_MPR0);
+		writel(VID_MPR1_BT601, vid->regs + VID_MPR1);
+		writel(VID_MPR2_BT601, vid->regs + VID_MPR2);
+		writel(VID_MPR3_BT601, vid->regs + VID_MPR3);
+	}
 }
 
 void sti_vid_disable(struct sti_vid *vid)
@@ -91,20 +203,14 @@ static void sti_vid_init(struct sti_vid *vid)
 	/* Opaque */
 	writel(VID_ALP_OPAQUE, vid->regs + VID_ALP);
 
-	/* Color conversion parameters */
-	writel(VID_MPR0_BT709, vid->regs + VID_MPR0);
-	writel(VID_MPR1_BT709, vid->regs + VID_MPR1);
-	writel(VID_MPR2_BT709, vid->regs + VID_MPR2);
-	writel(VID_MPR3_BT709, vid->regs + VID_MPR3);
-
 	/* Brightness, contrast, tint, saturation */
 	writel(VID_BC_DFLT, vid->regs + VID_BC);
 	writel(VID_TINT_DFLT, vid->regs + VID_TINT);
 	writel(VID_CSAT_DFLT, vid->regs + VID_CSAT);
 }
 
-struct sti_vid *sti_vid_create(struct device *dev, int id,
-			       void __iomem *baseaddr)
+struct sti_vid *sti_vid_create(struct device *dev, struct drm_device *drm_dev,
+			       int id, void __iomem *baseaddr)
 {
 	struct sti_vid *vid;
 
@@ -120,5 +226,8 @@ struct sti_vid *sti_vid_create(struct device *dev, int id,
 
 	sti_vid_init(vid);
 
+	if (vid_debugfs_init(vid, drm_dev->primary))
+		DRM_ERROR("VID debugfs setup failed\n");
+
 	return vid;
 }

drivers/gpu/drm/sti/sti_vid.h

@@ -23,7 +23,7 @@ struct sti_vid {
 void sti_vid_commit(struct sti_vid *vid,
 		    struct drm_plane_state *state);
 void sti_vid_disable(struct sti_vid *vid);
-struct sti_vid *sti_vid_create(struct device *dev, int id,
-			       void __iomem *baseaddr);
+struct sti_vid *sti_vid_create(struct device *dev, struct drm_device *drm_dev,
+			       int id, void __iomem *baseaddr);
 
 #endif

drivers/gpu/drm/sti/sti_vtg.c

@@ -15,8 +15,8 @@
 
 #include "sti_vtg.h"
 
-#define VTG_TYPE_MASTER         0
-#define VTG_TYPE_SLAVE_BY_EXT0  1
+#define VTG_MODE_MASTER         0
+#define VTG_MODE_SLAVE_BY_EXT0  1
 
 /* registers offset */
 #define VTG_MODE            0x0000
@@ -64,6 +64,9 @@
 /* Delay introduced by the HDMI in nb of pixel */
 #define HDMI_DELAY          (5)
 
+/* Delay introduced by the DVO in nb of pixel */
+#define DVO_DELAY           (2)
+
 /* delay introduced by the Arbitrary Waveform Generator in nb of pixels */
 #define AWG_DELAY_HD        (-9)
 #define AWG_DELAY_ED        (-8)
@@ -71,13 +74,61 @@
 
 LIST_HEAD(vtg_lookup);
 
+/*
+ * STI VTG register offset structure
+ *
+ *@h_hd:     stores the VTG_H_HD_x     register offset
+ *@top_v_vd: stores the VTG_TOP_V_VD_x register offset
+ *@bot_v_vd: stores the VTG_BOT_V_VD_x register offset
+ *@top_v_hd: stores the VTG_TOP_V_HD_x register offset
+ *@bot_v_hd: stores the VTG_BOT_V_HD_x register offset
+ */
+struct sti_vtg_regs_offs {
+	u32 h_hd;
+	u32 top_v_vd;
+	u32 bot_v_vd;
+	u32 top_v_hd;
+	u32 bot_v_hd;
+};
+
+#define VTG_MAX_SYNC_OUTPUT 4
+static const struct sti_vtg_regs_offs vtg_regs_offs[VTG_MAX_SYNC_OUTPUT] = {
+	{ VTG_H_HD_1,
+	  VTG_TOP_V_VD_1, VTG_BOT_V_VD_1, VTG_TOP_V_HD_1, VTG_BOT_V_HD_1 },
+	{ VTG_H_HD_2,
+	  VTG_TOP_V_VD_2, VTG_BOT_V_VD_2, VTG_TOP_V_HD_2, VTG_BOT_V_HD_2 },
+	{ VTG_H_HD_3,
+	  VTG_TOP_V_VD_3, VTG_BOT_V_VD_3, VTG_TOP_V_HD_3, VTG_BOT_V_HD_3 },
+	{ VTG_H_HD_4,
+	  VTG_TOP_V_VD_4, VTG_BOT_V_VD_4, VTG_TOP_V_HD_4, VTG_BOT_V_HD_4 }
+};
+
+/*
+ * STI VTG synchronisation parameters structure
+ *
+ *@hsync: sample number falling and rising edge
+ *@vsync_line_top: vertical top field line number falling and rising edge
+ *@vsync_line_bot: vertical bottom field line number falling and rising edge
+ *@vsync_off_top: vertical top field sample number rising and falling edge
+ *@vsync_off_bot: vertical bottom field sample number rising and falling edge
+ */
+struct sti_vtg_sync_params {
+	u32 hsync;
+	u32 vsync_line_top;
+	u32 vsync_line_bot;
+	u32 vsync_off_top;
+	u32 vsync_off_bot;
+};
+
 /**
  * STI VTG structure
  *
  * @dev: pointer to device driver
- * @data: data associated to the device
+ * @np: device node
+ * @regs: register mapping
+ * @sync_params: synchronisation parameters used to generate timings
  * @irq: VTG irq
- * @type: VTG type (main or aux)
+ * @irq_status: store the IRQ status value
  * @notifier_list: notifier callback
  * @crtc: the CRTC for vblank event
  * @slave: slave vtg
@@ -87,6 +138,7 @@ struct sti_vtg {
 	struct device *dev;
 	struct device_node *np;
 	void __iomem *regs;
+	struct sti_vtg_sync_params sync_params[VTG_MAX_SYNC_OUTPUT];
 	int irq;
 	u32 irq_status;
 	struct raw_notifier_head notifier_list;
@@ -146,13 +198,69 @@ static void vtg_set_output_window(void __iomem *regs,
 	writel(video_bottom_field_stop, regs + VTG_VID_BFS);
 }
 
+static void vtg_set_hsync_vsync_pos(struct sti_vtg_sync_params *sync,
+				    int delay,
+				    const struct drm_display_mode *mode)
+{
+	long clocksperline, start, stop;
+	u32 risesync_top, fallsync_top;
+	u32 risesync_offs_top, fallsync_offs_top;
+
+	clocksperline = mode->htotal;
+
+	/* Get the hsync position */
+	start = 0;
+	stop = mode->hsync_end - mode->hsync_start;
+
+	start += delay;
+	stop  += delay;
+
+	if (start < 0)
+		start += clocksperline;
+	else if (start >= clocksperline)
+		start -= clocksperline;
+
+	if (stop < 0)
+		stop += clocksperline;
+	else if (stop >= clocksperline)
+		stop -= clocksperline;
+
+	sync->hsync = (stop << 16) | start;
+
+	/* Get the vsync position */
+	if (delay >= 0) {
+		risesync_top = 1;
+		fallsync_top = risesync_top;
+		fallsync_top += mode->vsync_end - mode->vsync_start;
+
+		fallsync_offs_top = (u32)delay;
+		risesync_offs_top = (u32)delay;
+	} else {
+		risesync_top = mode->vtotal;
+		fallsync_top = mode->vsync_end - mode->vsync_start;
+
+		fallsync_offs_top = clocksperline + delay;
+		risesync_offs_top = clocksperline + delay;
+	}
+
+	sync->vsync_line_top = (fallsync_top << 16) | risesync_top;
+	sync->vsync_off_top = (fallsync_offs_top << 16) | risesync_offs_top;
+
+	/* Only progressive supported for now */
+	sync->vsync_line_bot = sync->vsync_line_top;
+	sync->vsync_off_bot = sync->vsync_off_top;
+}
+
 static void vtg_set_mode(struct sti_vtg *vtg,
-			 int type, const struct drm_display_mode *mode)
+			 int type,
+			 struct sti_vtg_sync_params *sync,
+			 const struct drm_display_mode *mode)
 {
-	u32 tmp;
+	unsigned int i;
 
 	if (vtg->slave)
-		vtg_set_mode(vtg->slave, VTG_TYPE_SLAVE_BY_EXT0, mode);
+		vtg_set_mode(vtg->slave, VTG_MODE_SLAVE_BY_EXT0,
+			     vtg->sync_params, mode);
 
 	/* Set the number of clock cycles per line */
 	writel(mode->htotal, vtg->regs + VTG_CLKLN);
@@ -163,57 +271,31 @@ static void vtg_set_mode(struct sti_vtg *vtg,
 	/* Program output window */
 	vtg_set_output_window(vtg->regs, mode);
 
-	/* prepare VTG set 1 for HDMI */
-	tmp = (mode->hsync_end - mode->hsync_start + HDMI_DELAY) << 16;
-	tmp |= HDMI_DELAY;
-	writel(tmp, vtg->regs + VTG_H_HD_1);
-
-	tmp = (mode->vsync_end - mode->vsync_start + 1) << 16;
-	tmp |= 1;
-	writel(tmp, vtg->regs + VTG_TOP_V_VD_1);
-	writel(tmp, vtg->regs + VTG_BOT_V_VD_1);
-
-	tmp = HDMI_DELAY << 16;
-	tmp |= HDMI_DELAY;
-	writel(tmp, vtg->regs + VTG_TOP_V_HD_1);
-	writel(tmp, vtg->regs + VTG_BOT_V_HD_1);
-
-	/* prepare VTG set 2 for for HD DCS */
-	tmp = (mode->hsync_end - mode->hsync_start) << 16;
-	writel(tmp, vtg->regs + VTG_H_HD_2);
-
-	tmp = (mode->vsync_end - mode->vsync_start + 1) << 16;
-	tmp |= 1;
-	writel(tmp, vtg->regs + VTG_TOP_V_VD_2);
-	writel(tmp, vtg->regs + VTG_BOT_V_VD_2);
-	writel(0, vtg->regs + VTG_TOP_V_HD_2);
-	writel(0, vtg->regs + VTG_BOT_V_HD_2);
-
-	/* prepare VTG set 3 for HD Analog in HD mode */
-	tmp = (mode->hsync_end - mode->hsync_start + AWG_DELAY_HD) << 16;
-	tmp |= mode->htotal + AWG_DELAY_HD;
-	writel(tmp, vtg->regs + VTG_H_HD_3);
-
-	tmp = (mode->vsync_end - mode->vsync_start) << 16;
-	tmp |= mode->vtotal;
-	writel(tmp, vtg->regs + VTG_TOP_V_VD_3);
-	writel(tmp, vtg->regs + VTG_BOT_V_VD_3);
-
-	tmp = (mode->htotal + AWG_DELAY_HD) << 16;
-	tmp |= mode->htotal + AWG_DELAY_HD;
-	writel(tmp, vtg->regs + VTG_TOP_V_HD_3);
-	writel(tmp, vtg->regs + VTG_BOT_V_HD_3);
-
-	/* Prepare VTG set 4 for DVO */
-	tmp = (mode->hsync_end - mode->hsync_start) << 16;
-	writel(tmp, vtg->regs + VTG_H_HD_4);
-
-	tmp = (mode->vsync_end - mode->vsync_start + 1) << 16;
-	tmp |= 1;
-	writel(tmp, vtg->regs + VTG_TOP_V_VD_4);
-	writel(tmp, vtg->regs + VTG_BOT_V_VD_4);
-	writel(0, vtg->regs + VTG_TOP_V_HD_4);
-	writel(0, vtg->regs + VTG_BOT_V_HD_4);
+	/* Set hsync and vsync position for HDMI */
+	vtg_set_hsync_vsync_pos(&sync[VTG_SYNC_ID_HDMI - 1], HDMI_DELAY, mode);
+
+	/* Set hsync and vsync position for HD DCS */
+	vtg_set_hsync_vsync_pos(&sync[VTG_SYNC_ID_HDDCS - 1], 0, mode);
+
+	/* Set hsync and vsync position for HDF */
+	vtg_set_hsync_vsync_pos(&sync[VTG_SYNC_ID_HDF - 1], AWG_DELAY_HD, mode);
+
+	/* Set hsync and vsync position for DVO */
+	vtg_set_hsync_vsync_pos(&sync[VTG_SYNC_ID_DVO - 1], DVO_DELAY, mode);
+
+	/* Progam the syncs outputs */
+	for (i = 0; i < VTG_MAX_SYNC_OUTPUT ; i++) {
+		writel(sync[i].hsync,
+		       vtg->regs + vtg_regs_offs[i].h_hd);
+		writel(sync[i].vsync_line_top,
+		       vtg->regs + vtg_regs_offs[i].top_v_vd);
+		writel(sync[i].vsync_line_bot,
+		       vtg->regs + vtg_regs_offs[i].bot_v_vd);
+		writel(sync[i].vsync_off_top,
+		       vtg->regs + vtg_regs_offs[i].top_v_hd);
+		writel(sync[i].vsync_off_bot,
+		       vtg->regs + vtg_regs_offs[i].bot_v_hd);
+	}
 
 	/* mode */
 	writel(type, vtg->regs + VTG_MODE);
@@ -231,7 +313,7 @@ void sti_vtg_set_config(struct sti_vtg *vtg,
 		const struct drm_display_mode *mode)
 {
 	/* write configuration */
-	vtg_set_mode(vtg, VTG_TYPE_MASTER, mode);
+	vtg_set_mode(vtg, VTG_MODE_MASTER, vtg->sync_params, mode);
 
 	vtg_reset(vtg);
 

drivers/gpu/drm/sti/sti_vtg.h

@@ -10,6 +10,11 @@
 #define VTG_TOP_FIELD_EVENT     1
 #define VTG_BOTTOM_FIELD_EVENT  2
 
+#define VTG_SYNC_ID_HDMI        1
+#define VTG_SYNC_ID_HDDCS       2
+#define VTG_SYNC_ID_HDF         3
+#define VTG_SYNC_ID_DVO         4
+
 struct sti_vtg;
 struct drm_display_mode;
 struct notifier_block;