Merge tag 'extcon-next-for-5.2' of...

Merge tag 'extcon-next-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next

Chanwoo writes:

Update extcon for v5.2

Detailed description for this pull request:
1. Add new extcon-intel-mrfld.c extcon provider driver
- On Intel Merrifield the Basin Cove PMIC provides a feature to detect
the USB connection type. This driver utilizes the feature in order
to support the USB dual role detection.

2. Update the extcon provider drivers
- For extcon-intel-cht-wc.c, make charger detection co-existed
  with OTG host mode and enable external charger.
- For intel extcon driver, add common header file (extcon-intel.h)
  in order to remove the duplicate definitions.
- For extcon-arizonal.c, disable microphone detection on driver removal.

3.
- Edit comment of extcon_unregister_notifer() to fix a build warning
- Add CONFIG_ACPI dependency to Kconfig to fix a build error for extcon-axp.c

* tag 'extcon-next-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon:
  extcon: arizona: Disable mic detect if running when driver is removed
  extcon: axp288: Add a depends on ACPI to the Kconfig entry
  extcon: mrfld: Introduce extcon driver for Basin Cove PMIC
  extcon: intel: Split out some definitions to a common header
  extcon: Fix build warning for extcon_unregister_notifier comment
  extcon: intel-cht-wc: Enable external charger
  extcon: intel-cht-wc: Make charger detection co-existed with OTG host mode

drivers/extcon/Kconfig

@@ -30,7 +30,7 @@ config EXTCON_ARIZONA
 
 config EXTCON_AXP288
 	tristate "X-Power AXP288 EXTCON support"
-	depends on MFD_AXP20X && USB_SUPPORT && X86
+	depends on MFD_AXP20X && USB_SUPPORT && X86 && ACPI
 	select USB_ROLE_SWITCH
 	help
 	  Say Y here to enable support for USB peripheral detection
@@ -60,6 +60,13 @@ config EXTCON_INTEL_CHT_WC
 	  Say Y here to enable extcon support for charger detection / control
 	  on the Intel Cherrytrail Whiskey Cove PMIC.
 
+config EXTCON_INTEL_MRFLD
+	tristate "Intel Merrifield Basin Cove PMIC extcon driver"
+	depends on INTEL_SOC_PMIC_MRFLD
+	help
+	  Say Y here to enable extcon support for charger detection / control
+	  on the Intel Merrifield Basin Cove PMIC.
+
 config EXTCON_MAX14577
 	tristate "Maxim MAX14577/77836 EXTCON Support"
 	depends on MFD_MAX14577

drivers/extcon/Makefile

@@ -11,6 +11,7 @@ obj-$(CONFIG_EXTCON_AXP288)	+= extcon-axp288.o
 obj-$(CONFIG_EXTCON_GPIO)	+= extcon-gpio.o
 obj-$(CONFIG_EXTCON_INTEL_INT3496) += extcon-intel-int3496.o
 obj-$(CONFIG_EXTCON_INTEL_CHT_WC) += extcon-intel-cht-wc.o
+obj-$(CONFIG_EXTCON_INTEL_MRFLD) += extcon-intel-mrfld.o
 obj-$(CONFIG_EXTCON_MAX14577)	+= extcon-max14577.o
 obj-$(CONFIG_EXTCON_MAX3355)	+= extcon-max3355.o
 obj-$(CONFIG_EXTCON_MAX77693)	+= extcon-max77693.o

drivers/extcon/devres.c

@@ -205,7 +205,7 @@ EXPORT_SYMBOL(devm_extcon_register_notifier);
 
 /**
  * devm_extcon_unregister_notifier()
-			- Resource-managed extcon_unregister_notifier()
+ *			- Resource-managed extcon_unregister_notifier()
  * @dev:	the device owning the extcon device being created
  * @edev:	the extcon device
  * @id:		the unique id among the extcon enumeration

drivers/extcon/extcon-arizona.c

@@ -1726,6 +1726,16 @@ static int arizona_extcon_remove(struct platform_device *pdev)
 	struct arizona_extcon_info *info = platform_get_drvdata(pdev);
 	struct arizona *arizona = info->arizona;
 	int jack_irq_rise, jack_irq_fall;
+	bool change;
+
+	regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1,
+				 ARIZONA_MICD_ENA, 0,
+				 &change);
+
+	if (change) {
+		regulator_disable(info->micvdd);
+		pm_runtime_put(info->dev);
+	}
 
 	gpiod_put(info->micd_pol_gpio);
 

drivers/extcon/extcon-intel-cht-wc.c

@@ -17,6 +17,8 @@
 #include <linux/regmap.h>
 #include <linux/slab.h>
 
+#include "extcon-intel.h"
+
 #define CHT_WC_PHYCTRL			0x5e07
 
 #define CHT_WC_CHGRCTRL0		0x5e16
@@ -29,7 +31,15 @@
 #define CHT_WC_CHGRCTRL0_DBPOFF		BIT(6)
 #define CHT_WC_CHGRCTRL0_CHR_WDT_NOKICK	BIT(7)
 
-#define CHT_WC_CHGRCTRL1		0x5e17
+#define CHT_WC_CHGRCTRL1			0x5e17
+#define CHT_WC_CHGRCTRL1_FUSB_INLMT_100		BIT(0)
+#define CHT_WC_CHGRCTRL1_FUSB_INLMT_150		BIT(1)
+#define CHT_WC_CHGRCTRL1_FUSB_INLMT_500		BIT(2)
+#define CHT_WC_CHGRCTRL1_FUSB_INLMT_900		BIT(3)
+#define CHT_WC_CHGRCTRL1_FUSB_INLMT_1500	BIT(4)
+#define CHT_WC_CHGRCTRL1_FTEMP_EVENT		BIT(5)
+#define CHT_WC_CHGRCTRL1_OTGMODE		BIT(6)
+#define CHT_WC_CHGRCTRL1_DBPEN			BIT(7)
 
 #define CHT_WC_USBSRC			0x5e29
 #define CHT_WC_USBSRC_STS_MASK		GENMASK(1, 0)
@@ -48,6 +58,13 @@
 #define CHT_WC_USBSRC_TYPE_OTHER	8
 #define CHT_WC_USBSRC_TYPE_DCP_EXTPHY	9
 
+#define CHT_WC_CHGDISCTRL		0x5e2f
+#define CHT_WC_CHGDISCTRL_OUT		BIT(0)
+/* 0 - open drain, 1 - regular push-pull output */
+#define CHT_WC_CHGDISCTRL_DRV		BIT(4)
+/* 0 - pin is controlled by SW, 1 - by HW */
+#define CHT_WC_CHGDISCTRL_FN		BIT(6)
+
 #define CHT_WC_PWRSRC_IRQ		0x6e03
 #define CHT_WC_PWRSRC_IRQ_MASK		0x6e0f
 #define CHT_WC_PWRSRC_STS		0x6e1e
@@ -65,15 +82,6 @@
 #define CHT_WC_VBUS_GPIO_CTLO_DRV_OD	BIT(4)
 #define CHT_WC_VBUS_GPIO_CTLO_DIR_OUT	BIT(5)
 
-enum cht_wc_usb_id {
-	USB_ID_OTG,
-	USB_ID_GND,
-	USB_ID_FLOAT,
-	USB_RID_A,
-	USB_RID_B,
-	USB_RID_C,
-};
-
 enum cht_wc_mux_select {
 	MUX_SEL_PMIC = 0,
 	MUX_SEL_SOC,
@@ -101,9 +109,9 @@ static int cht_wc_extcon_get_id(struct cht_wc_extcon_data *ext, int pwrsrc_sts)
 {
 	switch ((pwrsrc_sts & CHT_WC_PWRSRC_USBID_MASK) >> CHT_WC_PWRSRC_USBID_SHIFT) {
 	case CHT_WC_PWRSRC_RID_GND:
-		return USB_ID_GND;
+		return INTEL_USB_ID_GND;
 	case CHT_WC_PWRSRC_RID_FLOAT:
-		return USB_ID_FLOAT;
+		return INTEL_USB_ID_FLOAT;
 	case CHT_WC_PWRSRC_RID_ACA:
 	default:
 		/*
@@ -111,7 +119,7 @@ static int cht_wc_extcon_get_id(struct cht_wc_extcon_data *ext, int pwrsrc_sts)
 		 * the USBID GPADC channel here and determine ACA role
 		 * based on that.
 		 */
-		return USB_ID_FLOAT;
+		return INTEL_USB_ID_FLOAT;
 	}
 }
 
@@ -198,6 +206,30 @@ static void cht_wc_extcon_set_5v_boost(struct cht_wc_extcon_data *ext,
 		dev_err(ext->dev, "Error writing Vbus GPIO CTLO: %d\n", ret);
 }
 
+static void cht_wc_extcon_set_otgmode(struct cht_wc_extcon_data *ext,
+				      bool enable)
+{
+	unsigned int val = enable ? CHT_WC_CHGRCTRL1_OTGMODE : 0;
+	int ret;
+
+	ret = regmap_update_bits(ext->regmap, CHT_WC_CHGRCTRL1,
+				 CHT_WC_CHGRCTRL1_OTGMODE, val);
+	if (ret)
+		dev_err(ext->dev, "Error updating CHGRCTRL1 reg: %d\n", ret);
+}
+
+static void cht_wc_extcon_enable_charging(struct cht_wc_extcon_data *ext,
+					  bool enable)
+{
+	unsigned int val = enable ? 0 : CHT_WC_CHGDISCTRL_OUT;
+	int ret;
+
+	ret = regmap_update_bits(ext->regmap, CHT_WC_CHGDISCTRL,
+				 CHT_WC_CHGDISCTRL_OUT, val);
+	if (ret)
+		dev_err(ext->dev, "Error updating CHGDISCTRL reg: %d\n", ret);
+}
+
 /* Small helper to sync EXTCON_CHG_USB_SDP and EXTCON_USB state */
 static void cht_wc_extcon_set_state(struct cht_wc_extcon_data *ext,
 				    unsigned int cable, bool state)
@@ -221,11 +253,17 @@ static void cht_wc_extcon_pwrsrc_event(struct cht_wc_extcon_data *ext)
 	}
 
 	id = cht_wc_extcon_get_id(ext, pwrsrc_sts);
-	if (id == USB_ID_GND) {
+	if (id == INTEL_USB_ID_GND) {
+		cht_wc_extcon_enable_charging(ext, false);
+		cht_wc_extcon_set_otgmode(ext, true);
+
 		/* The 5v boost causes a false VBUS / SDP detect, skip */
 		goto charger_det_done;
 	}
 
+	cht_wc_extcon_set_otgmode(ext, false);
+	cht_wc_extcon_enable_charging(ext, true);
+
 	/* Plugged into a host/charger or not connected? */
 	if (!(pwrsrc_sts & CHT_WC_PWRSRC_VBUS)) {
 		/* Route D+ and D- to PMIC for future charger detection */
@@ -248,7 +286,7 @@ static void cht_wc_extcon_pwrsrc_event(struct cht_wc_extcon_data *ext)
 		ext->previous_cable = cable;
 	}
 
-	ext->usb_host = ((id == USB_ID_GND) || (id == USB_RID_A));
+	ext->usb_host = ((id == INTEL_USB_ID_GND) || (id == INTEL_USB_RID_A));
 	extcon_set_state_sync(ext->edev, EXTCON_USB_HOST, ext->usb_host);
 }
 
@@ -278,6 +316,14 @@ static int cht_wc_extcon_sw_control(struct cht_wc_extcon_data *ext, bool enable)
 {
 	int ret, mask, val;
 
+	val = enable ? 0 : CHT_WC_CHGDISCTRL_FN;
+	ret = regmap_update_bits(ext->regmap, CHT_WC_CHGDISCTRL,
+				 CHT_WC_CHGDISCTRL_FN, val);
+	if (ret)
+		dev_err(ext->dev,
+			"Error setting sw control for CHGDIS pin: %d\n",
+			ret);
+
 	mask = CHT_WC_CHGRCTRL0_SWCONTROL | CHT_WC_CHGRCTRL0_CCSM_OFF;
 	val = enable ? mask : 0;
 	ret = regmap_update_bits(ext->regmap, CHT_WC_CHGRCTRL0, mask, val);
@@ -329,7 +375,10 @@ static int cht_wc_extcon_probe(struct platform_device *pdev)
 	/* Enable sw control */
 	ret = cht_wc_extcon_sw_control(ext, true);
 	if (ret)
-		return ret;
+		goto disable_sw_control;
+
+	/* Disable charging by external battery charger */
+	cht_wc_extcon_enable_charging(ext, false);
 
 	/* Register extcon device */
 	ret = devm_extcon_dev_register(ext->dev, ext->edev);

drivers/extcon/extcon-intel-mrfld.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * extcon driver for Basin Cove PMIC
+ *
+ * Copyright (c) 2019, Intel Corporation.
+ * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ */
+
+#include <linux/extcon-provider.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/mfd/intel_soc_pmic_mrfld.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "extcon-intel.h"
+
+#define BCOVE_USBIDCTRL			0x19
+#define BCOVE_USBIDCTRL_ID		BIT(0)
+#define BCOVE_USBIDCTRL_ACA		BIT(1)
+#define BCOVE_USBIDCTRL_ALL	(BCOVE_USBIDCTRL_ID | BCOVE_USBIDCTRL_ACA)
+
+#define BCOVE_USBIDSTS			0x1a
+#define BCOVE_USBIDSTS_GND		BIT(0)
+#define BCOVE_USBIDSTS_RARBRC_MASK	GENMASK(2, 1)
+#define BCOVE_USBIDSTS_RARBRC_SHIFT	1
+#define BCOVE_USBIDSTS_NO_ACA		0
+#define BCOVE_USBIDSTS_R_ID_A		1
+#define BCOVE_USBIDSTS_R_ID_B		2
+#define BCOVE_USBIDSTS_R_ID_C		3
+#define BCOVE_USBIDSTS_FLOAT		BIT(3)
+#define BCOVE_USBIDSTS_SHORT		BIT(4)
+
+#define BCOVE_CHGRIRQ_ALL	(BCOVE_CHGRIRQ_VBUSDET | BCOVE_CHGRIRQ_DCDET | \
+				 BCOVE_CHGRIRQ_BATTDET | BCOVE_CHGRIRQ_USBIDDET)
+
+#define BCOVE_CHGRCTRL0			0x4b
+#define BCOVE_CHGRCTRL0_CHGRRESET	BIT(0)
+#define BCOVE_CHGRCTRL0_EMRGCHREN	BIT(1)
+#define BCOVE_CHGRCTRL0_EXTCHRDIS	BIT(2)
+#define BCOVE_CHGRCTRL0_SWCONTROL	BIT(3)
+#define BCOVE_CHGRCTRL0_TTLCK		BIT(4)
+#define BCOVE_CHGRCTRL0_BIT_5		BIT(5)
+#define BCOVE_CHGRCTRL0_BIT_6		BIT(6)
+#define BCOVE_CHGRCTRL0_CHR_WDT_NOKICK	BIT(7)
+
+struct mrfld_extcon_data {
+	struct device *dev;
+	struct regmap *regmap;
+	struct extcon_dev *edev;
+	unsigned int status;
+	unsigned int id;
+};
+
+static const unsigned int mrfld_extcon_cable[] = {
+	EXTCON_USB,
+	EXTCON_USB_HOST,
+	EXTCON_CHG_USB_SDP,
+	EXTCON_CHG_USB_CDP,
+	EXTCON_CHG_USB_DCP,
+	EXTCON_CHG_USB_ACA,
+	EXTCON_NONE,
+};
+
+static int mrfld_extcon_clear(struct mrfld_extcon_data *data, unsigned int reg,
+			      unsigned int mask)
+{
+	return regmap_update_bits(data->regmap, reg, mask, 0x00);
+}
+
+static int mrfld_extcon_set(struct mrfld_extcon_data *data, unsigned int reg,
+			    unsigned int mask)
+{
+	return regmap_update_bits(data->regmap, reg, mask, 0xff);
+}
+
+static int mrfld_extcon_sw_control(struct mrfld_extcon_data *data, bool enable)
+{
+	unsigned int mask = BCOVE_CHGRCTRL0_SWCONTROL;
+	struct device *dev = data->dev;
+	int ret;
+
+	if (enable)
+		ret = mrfld_extcon_set(data, BCOVE_CHGRCTRL0, mask);
+	else
+		ret = mrfld_extcon_clear(data, BCOVE_CHGRCTRL0, mask);
+	if (ret)
+		dev_err(dev, "can't set SW control: %d\n", ret);
+	return ret;
+}
+
+static int mrfld_extcon_get_id(struct mrfld_extcon_data *data)
+{
+	struct regmap *regmap = data->regmap;
+	unsigned int id;
+	bool ground;
+	int ret;
+
+	ret = regmap_read(regmap, BCOVE_USBIDSTS, &id);
+	if (ret)
+		return ret;
+
+	if (id & BCOVE_USBIDSTS_FLOAT)
+		return INTEL_USB_ID_FLOAT;
+
+	switch ((id & BCOVE_USBIDSTS_RARBRC_MASK) >> BCOVE_USBIDSTS_RARBRC_SHIFT) {
+	case BCOVE_USBIDSTS_R_ID_A:
+		return INTEL_USB_RID_A;
+	case BCOVE_USBIDSTS_R_ID_B:
+		return INTEL_USB_RID_B;
+	case BCOVE_USBIDSTS_R_ID_C:
+		return INTEL_USB_RID_C;
+	}
+
+	/*
+	 * PMIC A0 reports USBIDSTS_GND = 1 for ID_GND,
+	 * but PMIC B0 reports USBIDSTS_GND = 0 for ID_GND.
+	 * Thus we must check this bit at last.
+	 */
+	ground = id & BCOVE_USBIDSTS_GND;
+	switch ('A' + BCOVE_MAJOR(data->id)) {
+	case 'A':
+		return ground ? INTEL_USB_ID_GND : INTEL_USB_ID_FLOAT;
+	case 'B':
+		return ground ? INTEL_USB_ID_FLOAT : INTEL_USB_ID_GND;
+	}
+
+	/* Unknown or unsupported type */
+	return INTEL_USB_ID_FLOAT;
+}
+
+static int mrfld_extcon_role_detect(struct mrfld_extcon_data *data)
+{
+	unsigned int id;
+	bool usb_host;
+	int ret;
+
+	ret = mrfld_extcon_get_id(data);
+	if (ret < 0)
+		return ret;
+
+	id = ret;
+
+	usb_host = (id == INTEL_USB_ID_GND) || (id == INTEL_USB_RID_A);
+	extcon_set_state_sync(data->edev, EXTCON_USB_HOST, usb_host);
+
+	return 0;
+}
+
+static int mrfld_extcon_cable_detect(struct mrfld_extcon_data *data)
+{
+	struct regmap *regmap = data->regmap;
+	unsigned int status, change;
+	int ret;
+
+	/*
+	 * It seems SCU firmware clears the content of BCOVE_CHGRIRQ1
+	 * and makes it useless for OS. Instead we compare a previously
+	 * stored status to the current one, provided by BCOVE_SCHGRIRQ1.
+	 */
+	ret = regmap_read(regmap, BCOVE_SCHGRIRQ1, &status);
+	if (ret)
+		return ret;
+
+	change = status ^ data->status;
+	if (!change)
+		return -ENODATA;
+
+	if (change & BCOVE_CHGRIRQ_USBIDDET) {
+		ret = mrfld_extcon_role_detect(data);
+		if (ret)
+			return ret;
+	}
+
+	data->status = status;
+
+	return 0;
+}
+
+static irqreturn_t mrfld_extcon_interrupt(int irq, void *dev_id)
+{
+	struct mrfld_extcon_data *data = dev_id;
+	int ret;
+
+	ret = mrfld_extcon_cable_detect(data);
+
+	mrfld_extcon_clear(data, BCOVE_MIRQLVL1, BCOVE_LVL1_CHGR);
+
+	return ret ? IRQ_NONE: IRQ_HANDLED;
+}
+
+static int mrfld_extcon_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct intel_soc_pmic *pmic = dev_get_drvdata(dev->parent);
+	struct regmap *regmap = pmic->regmap;
+	struct mrfld_extcon_data *data;
+	unsigned int id;
+	int irq, ret;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->dev = dev;
+	data->regmap = regmap;
+
+	data->edev = devm_extcon_dev_allocate(dev, mrfld_extcon_cable);
+	if (IS_ERR(data->edev))
+		return -ENOMEM;
+
+	ret = devm_extcon_dev_register(dev, data->edev);
+	if (ret < 0) {
+		dev_err(dev, "can't register extcon device: %d\n", ret);
+		return ret;
+	}
+
+	ret = devm_request_threaded_irq(dev, irq, NULL, mrfld_extcon_interrupt,
+					IRQF_ONESHOT | IRQF_SHARED, pdev->name,
+					data);
+	if (ret) {
+		dev_err(dev, "can't register IRQ handler: %d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_read(regmap, BCOVE_ID, &id);
+	if (ret) {
+		dev_err(dev, "can't read PMIC ID: %d\n", ret);
+		return ret;
+	}
+
+	data->id = id;
+
+	ret = mrfld_extcon_sw_control(data, true);
+	if (ret)
+		return ret;
+
+	/* Get initial state */
+	mrfld_extcon_role_detect(data);
+
+	mrfld_extcon_clear(data, BCOVE_MIRQLVL1, BCOVE_LVL1_CHGR);
+	mrfld_extcon_clear(data, BCOVE_MCHGRIRQ1, BCOVE_CHGRIRQ_ALL);
+
+	mrfld_extcon_set(data, BCOVE_USBIDCTRL, BCOVE_USBIDCTRL_ALL);
+
+	platform_set_drvdata(pdev, data);
+
+	return 0;
+}
+
+static int mrfld_extcon_remove(struct platform_device *pdev)
+{
+	struct mrfld_extcon_data *data = platform_get_drvdata(pdev);
+
+	mrfld_extcon_sw_control(data, false);
+
+	return 0;
+}
+
+static const struct platform_device_id mrfld_extcon_id_table[] = {
+	{ .name = "mrfld_bcove_pwrsrc" },
+	{}
+};
+MODULE_DEVICE_TABLE(platform, mrfld_extcon_id_table);
+
+static struct platform_driver mrfld_extcon_driver = {
+	.driver = {
+		.name	= "mrfld_bcove_pwrsrc",
+	},
+	.probe		= mrfld_extcon_probe,
+	.remove		= mrfld_extcon_remove,
+	.id_table	= mrfld_extcon_id_table,
+};
+module_platform_driver(mrfld_extcon_driver);
+
+MODULE_AUTHOR("Andy Shevchenko <andriy.shevchenko@linux.intel.com>");
+MODULE_DESCRIPTION("extcon driver for Intel Merrifield Basin Cove PMIC");
+MODULE_LICENSE("GPL v2");

drivers/extcon/extcon-intel.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Header file for Intel extcon hardware
+ *
+ * Copyright (C) 2019 Intel Corporation. All rights reserved.
+ */
+
+#ifndef __EXTCON_INTEL_H__
+#define __EXTCON_INTEL_H__
+
+enum extcon_intel_usb_id {
+	INTEL_USB_ID_OTG,
+	INTEL_USB_ID_GND,
+	INTEL_USB_ID_FLOAT,
+	INTEL_USB_RID_A,
+	INTEL_USB_RID_B,
+	INTEL_USB_RID_C,
+};
+
+#endif	/* __EXTCON_INTEL_H__ */