Commit cf828ecc authored by Arnd Bergmann's avatar Arnd Bergmann

Merge tag 'mvebu-dt-4.14-1' of git://git.infradead.org/linux-mvebu into next/dt

Pull "mvebu dt for 4.14 (part 1)" from Gregory CLEMENT:

Add arm_global_timer node on Armada 38x

Fix PCI bus dtc warnings on mvebu 32 bits device tree files

* tag 'mvebu-dt-4.14-1' of git://git.infradead.org/linux-mvebu:
  ARM: dts: armada-38x: Add arm_global_timer node
  ARM: dts: marvell: fix PCI bus dtc warnings
parents 92a2a8cb 0f015017
......@@ -286,7 +286,7 @@ pcie-controller {
status = "disabled";
};
pcie@10,0 {
pcie@a,0 {
device_type = "pci";
assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
reg = <0x5000 0 0 0 0>;
......
......@@ -72,7 +72,7 @@ bootrom {
reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>;
};
pciec: pcie-controller@82000000 {
pciec: pcie@82000000 {
compatible = "marvell,armada-370-pcie";
status = "disabled";
device_type = "pci";
......@@ -100,6 +100,7 @@ pcie0: pcie@1,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 58>;
marvell,pcie-port = <0>;
......@@ -117,6 +118,7 @@ pcie2: pcie@2,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 62>;
marvell,pcie-port = <1>;
......
......@@ -582,7 +582,7 @@ coredivclk: corediv-clock@e8250 {
};
};
pciec: pcie-controller@82000000 {
pciec: pcie@82000000 {
compatible = "marvell,armada-370-pcie";
status = "disabled";
device_type = "pci";
......@@ -610,6 +610,7 @@ pcie0: pcie@1,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
marvell,pcie-port = <0>;
......@@ -627,6 +628,7 @@ pcie1: pcie@2,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
marvell,pcie-port = <0>;
......
......@@ -71,7 +71,7 @@ pinctrl@18000 {
};
};
pcie-controller {
pcie {
compatible = "marvell,armada-370-pcie";
status = "disabled";
device_type = "pci";
......@@ -104,6 +104,7 @@ pcie@1,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
marvell,pcie-port = <0>;
......@@ -122,6 +123,7 @@ pcie@2,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
marvell,pcie-port = <1>;
......@@ -140,6 +142,7 @@ pcie@3,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
0x81000000 0 0 0x81000000 0x3 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
marvell,pcie-port = <2>;
......
......@@ -209,7 +209,7 @@ bm-bppi {
status = "okay";
};
pcie-controller {
pcie {
status = "okay";
/*
......
......@@ -96,7 +96,7 @@ usb3@f8000 {
};
};
pcie-controller {
pcie {
status = "okay";
pcie@1,0 {
......
......@@ -70,7 +70,7 @@ cpu@1 {
};
soc {
pciec: pcie-controller {
pciec: pcie {
compatible = "marvell,armada-370-pcie";
status = "disabled";
device_type = "pci";
......@@ -109,6 +109,7 @@ pcie1: pcie@1,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
marvell,pcie-port = <0>;
......@@ -127,6 +128,7 @@ pcie2: pcie@2,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
marvell,pcie-port = <1>;
......@@ -145,6 +147,7 @@ pcie3: pcie@3,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
0x81000000 0 0 0x81000000 0x3 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
marvell,pcie-port = <2>;
......@@ -166,6 +169,7 @@ pcie4: pcie@4,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
0x81000000 0 0 0x81000000 0x4 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
marvell,pcie-port = <3>;
......
......@@ -62,7 +62,7 @@ usb3@f0000 {
};
};
pcie-controller {
pcie {
pcie@3,0 {
/* Port 2, Lane 0. CON2, nearest CPU. */
reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>;
......
......@@ -104,7 +104,7 @@ usb3@f8000 {
};
};
pcie-controller {
pcie {
status = "okay";
/*
* The two PCIe units are accessible through
......
......@@ -172,7 +172,7 @@ bm-bppi {
status = "okay";
};
pcie-controller {
pcie {
status = "okay";
/*
* The two PCIe units are accessible through
......
......@@ -240,7 +240,7 @@ bm-bppi {
status = "okay";
};
pcie-controller {
pcie {
status = "okay";
/*
* One PCIe units is accessible through
......
......@@ -117,7 +117,7 @@ usb3@f0000 {
};
};
pcie-controller {
pcie {
status = "okay";
/*
* One PCIe units is accessible through
......
......@@ -154,6 +154,13 @@ scu@c000 {
reg = <0xc000 0x58>;
};
timer@c200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0xc200 0x20>;
interrupts = <GIC_PPI 11 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
clocks = <&coreclk 2>;
};
timer@c600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xc600 0x20>;
......
......@@ -123,7 +123,7 @@ usb3@f8000 {
};
};
pcie-controller {
pcie {
status = "okay";
/* CON30 */
......
......@@ -139,7 +139,7 @@ usb3@f0000 {
};
};
pcie-controller {
pcie {
status = "okay";
/*
......
......@@ -118,7 +118,7 @@ usb3@f8000 {
};
};
pcie-controller {
pcie {
status = "okay";
pcie@1,0 {
......
......@@ -442,7 +442,7 @@ thermal@e8078 {
};
};
pcie-controller {
pcie {
compatible = "marvell,armada-370-pcie";
status = "disabled";
device_type = "pci";
......@@ -481,6 +481,7 @@ pcie@1,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
marvell,pcie-port = <0>;
......@@ -499,6 +500,7 @@ pcie@2,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
marvell,pcie-port = <1>;
......@@ -517,6 +519,7 @@ pcie@3,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
0x81000000 0 0 0x81000000 0x3 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
marvell,pcie-port = <2>;
......@@ -538,6 +541,7 @@ pcie@4,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
0x81000000 0 0 0x81000000 0x4 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
marvell,pcie-port = <3>;
......
......@@ -91,7 +91,7 @@ bootrom {
/*
* 98DX3236 has 1 x1 PCIe unit Gen2.0
*/
pciec: pcie-controller@82000000 {
pciec: pcie@82000000 {
compatible = "marvell,armada-xp-pcie";
status = "disabled";
device_type = "pci";
......@@ -116,6 +116,7 @@ pcie1: pcie@1,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 58>;
marvell,pcie-port = <0>;
......
......@@ -242,7 +242,7 @@ pcie@9,0 {
/* Port 2, Lane 0 */
status = "okay";
};
pcie@10,0 {
pcie@a,0 {
/* Port 3, Lane 0 */
status = "okay";
};
......
......@@ -227,7 +227,7 @@ pcie@9,0 {
/* Port 2, Lane 0 */
status = "okay";
};
pcie@10,0 {
pcie@a,0 {
/* Port 3, Lane 0 */
status = "okay";
};
......
......@@ -86,7 +86,7 @@ soc {
* configured as x4 or quad x1 lanes. One unit is
* x1 only.
*/
pciec: pcie-controller@82000000 {
pciec: pcie@82000000 {
compatible = "marvell,armada-xp-pcie";
status = "disabled";
device_type = "pci";
......@@ -123,6 +123,7 @@ pcie1: pcie@1,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 58>;
marvell,pcie-port = <0>;
......@@ -140,6 +141,7 @@ pcie2: pcie@2,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 59>;
marvell,pcie-port = <0>;
......@@ -157,6 +159,7 @@ pcie3: pcie@3,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
0x81000000 0 0 0x81000000 0x3 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 60>;
marvell,pcie-port = <0>;
......@@ -174,6 +177,7 @@ pcie4: pcie@4,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
0x81000000 0 0 0x81000000 0x4 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 61>;
marvell,pcie-port = <0>;
......@@ -191,6 +195,7 @@ pcie5: pcie@5,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
0x81000000 0 0 0x81000000 0x5 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 62>;
marvell,pcie-port = <1>;
......
......@@ -87,7 +87,7 @@ soc {
* configured as x4 or quad x1 lanes. One unit is
* x4 only.
*/
pciec: pcie-controller@82000000 {
pciec: pcie@82000000 {
compatible = "marvell,armada-xp-pcie";
status = "disabled";
device_type = "pci";
......@@ -138,6 +138,7 @@ pcie1: pcie@1,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 58>;
marvell,pcie-port = <0>;
......@@ -155,6 +156,7 @@ pcie2: pcie@2,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 59>;
marvell,pcie-port = <0>;
......@@ -172,6 +174,7 @@ pcie3: pcie@3,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
0x81000000 0 0 0x81000000 0x3 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 60>;
marvell,pcie-port = <0>;
......@@ -189,6 +192,7 @@ pcie4: pcie@4,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
0x81000000 0 0 0x81000000 0x4 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 61>;
marvell,pcie-port = <0>;
......@@ -206,6 +210,7 @@ pcie5: pcie@5,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
0x81000000 0 0 0x81000000 0x5 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 62>;
marvell,pcie-port = <1>;
......@@ -223,6 +228,7 @@ pcie6: pcie@6,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
0x81000000 0 0 0x81000000 0x6 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 63>;
marvell,pcie-port = <1>;
......@@ -240,6 +246,7 @@ pcie7: pcie@7,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
0x81000000 0 0 0x81000000 0x7 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 64>;
marvell,pcie-port = <1>;
......@@ -257,6 +264,7 @@ pcie8: pcie@8,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
0x81000000 0 0 0x81000000 0x8 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 65>;
marvell,pcie-port = <1>;
......@@ -274,6 +282,7 @@ pcie9: pcie@9,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
0x81000000 0 0 0x81000000 0x9 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 99>;
marvell,pcie-port = <2>;
......
......@@ -104,7 +104,7 @@ soc {
* configured as x4 or quad x1 lanes. Two units are
* x4/x1.
*/
pciec: pcie-controller@82000000 {
pciec: pcie@82000000 {
compatible = "marvell,armada-xp-pcie";
status = "disabled";
device_type = "pci";
......@@ -159,6 +159,7 @@ pcie1: pcie@1,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 58>;
marvell,pcie-port = <0>;
......@@ -176,6 +177,7 @@ pcie2: pcie@2,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 59>;
marvell,pcie-port = <0>;
......@@ -193,6 +195,7 @@ pcie3: pcie@3,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
0x81000000 0 0 0x81000000 0x3 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 60>;
marvell,pcie-port = <0>;
......@@ -210,6 +213,7 @@ pcie4: pcie@4,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
0x81000000 0 0 0x81000000 0x4 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 61>;
marvell,pcie-port = <0>;
......@@ -227,6 +231,7 @@ pcie5: pcie@5,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
0x81000000 0 0 0x81000000 0x5 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 62>;
marvell,pcie-port = <1>;
......@@ -244,6 +249,7 @@ pcie6: pcie@6,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
0x81000000 0 0 0x81000000 0x6 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 63>;
marvell,pcie-port = <1>;
......@@ -261,6 +267,7 @@ pcie7: pcie@7,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
0x81000000 0 0 0x81000000 0x7 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 64>;
marvell,pcie-port = <1>;
......@@ -278,6 +285,7 @@ pcie8: pcie@8,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
0x81000000 0 0 0x81000000 0x8 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 65>;
marvell,pcie-port = <1>;
......@@ -295,6 +303,7 @@ pcie9: pcie@9,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
0x81000000 0 0 0x81000000 0x9 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 99>;
marvell,pcie-port = <2>;
......@@ -303,7 +312,7 @@ pcie9: pcie@9,0 {
status = "disabled";
};
pcie10: pcie@10,0 {
pcie10: pcie@a,0 {
device_type = "pci";
assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
reg = <0x5000 0 0 0 0>;
......@@ -312,6 +321,7 @@ pcie10: pcie@10,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
0x81000000 0 0 0x81000000 0xa 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 103>;
marvell,pcie-port = <3>;
......
......@@ -88,7 +88,7 @@ spi-flash@0 {
&pcie {
status = "okay";
/* Fresco Logic USB3.0 xHCI controller */
pcie-port@0 {
pcie@1 {
status = "okay";
reset-gpios = <&gpio0 26 1>;
reset-delay-us = <20000>;
......@@ -96,7 +96,7 @@ pcie-port@0 {
pinctrl-names = "default";
};
/* Mini-PCIe slot */
pcie-port@1 {
pcie@2 {
status = "okay";
reset-gpios = <&gpio0 25 1>;
};
......
......@@ -89,7 +89,7 @@ MBUS_ID(0x01, 0xfd) 0 0xf8000000 0x8000000 /* BootROM 128M */
MBUS_ID(0x03, 0x01) 0 0xc8000000 0x0100000 /* CESA SRAM 1M */
MBUS_ID(0x0d, 0x00) 0 0xf0000000 0x0100000>; /* PMU SRAM 1M */
pcie: pcie-controller {
pcie: pcie {
compatible = "marvell,dove-pcie";
status = "disabled";
device_type = "pci";
......@@ -106,7 +106,7 @@ pcie: pcie-controller {
0x82000000 0x2 0x0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 Mem */
0x81000000 0x2 0x0 MBUS_ID(0x08, 0xe0) 0 1 0>; /* Port 1.0 I/O */
pcie0: pcie-port@0 {
pcie0: pcie@1 {
device_type = "pci";
status = "disabled";
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
......@@ -118,13 +118,14 @@ pcie0: pcie-port@0 {
#size-cells = <2>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
bus-range = <0x00 0xff>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &intc 16>;
};
pcie1: pcie-port@1 {
pcie1: pcie@2 {
device_type = "pci";
status = "disabled";
assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
......@@ -136,6 +137,7 @@ pcie1: pcie-port@1 {
#size-cells = <2>;
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
bus-range = <0x00 0xff>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
......
/ {
mbus@f1000000 {
pciec: pcie-controller@82000000 {
pciec: pcie@82000000 {
compatible = "marvell,kirkwood-pcie";
status = "disabled";
device_type = "pci";
......@@ -24,6 +24,7 @@ pcie0: pcie@1,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &intc 9>;
marvell,pcie-port = <0>;
......
/ {
mbus@f1000000 {
pciec: pcie-controller@82000000 {
pciec: pcie@82000000 {
compatible = "marvell,kirkwood-pcie";
status = "disabled";
device_type = "pci";
......@@ -24,6 +24,7 @@ pcie0: pcie@1,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &intc 9>;
marvell,pcie-port = <0>;
......
/ {
mbus@f1000000 {
pciec: pcie-controller@82000000 {
pciec: pcie@82000000 {
compatible = "marvell,kirkwood-pcie";
status = "disabled";
device_type = "pci";
......@@ -28,6 +28,7 @@ pcie0: pcie@1,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &intc 9>;
marvell,pcie-port = <0>;
......@@ -45,6 +46,7 @@ pcie1: pcie@2,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &intc 10>;
marvell,pcie-port = <1>;
......
/ {
mbus@f1000000 {
pciec: pcie-controller@82000000 {
pciec: pcie@82000000 {
compatible = "marvell,kirkwood-pcie";
status = "disabled";
device_type = "pci";
......@@ -24,6 +24,7 @@ pcie0: pcie@1,0 {
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &intc 9>;
marvell,pcie-port = <0>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment