Merge patch series "can: esd_usb: More preparation before supporting esd CAN-USB/3 (addendum)"

Frank Jungclaus <frank.jungclaus@esd.eu> says:

While trying to again merge my code changes for CAN-USB/3, I came
across some more places where it could make sense to change them
analogous to the previous clean-up patch series [1].

[1] [PATCH v2 0/6] can: esd_usb: More preparation before supporting esd CAN-USB/3
Link: https://lore.kernel.org/all/20230519195600.420644-1-frank.jungclaus@esd.eu

Link: https://lore.kernel.org/r/20230523173105.3175086-1-frank.jungclaus@esd.euSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

drivers/net/can/usb/esd_usb.c

@@ -43,8 +43,7 @@ MODULE_LICENSE("GPL v2");
 #define ESD_USB_CMD_IDADD		6 /* also used for IDADD_REPLY */
 
 /* esd CAN message flags - dlc field */
-#define ESD_RTR	BIT(4)
-
+#define ESD_USB_RTR	BIT(4)
 
 /* esd CAN message flags - id field */
 #define ESD_USB_EXTID	BIT(29)
@@ -52,7 +51,7 @@ MODULE_LICENSE("GPL v2");
 #define ESD_USB_IDMASK	GENMASK(28, 0)
 
 /* esd CAN event ids */
-#define ESD_EV_CAN_ERROR_EXT	2 /* CAN controller specific diagnostic data */
+#define ESD_USB_EV_CAN_ERROR_EXT	2 /* CAN controller specific diagnostic data */
 
 /* baudrate message flags */
 #define ESD_USB_LOM	BIT(30) /* Listen Only Mode */
@@ -67,23 +66,23 @@ MODULE_LICENSE("GPL v2");
 #define ESD_USB_TRIPLE_SAMPLES	BIT(23)
 
 /* esd IDADD message */
-#define ESD_USB_ID_ENABLE	0x80
+#define ESD_USB_ID_ENABLE	BIT(7)
 #define ESD_USB_MAX_ID_SEGMENT	64
 
 /* SJA1000 ECC register (emulated by usb firmware) */
-#define ESD_USB_SJA1000_ECC_SEG		0x1F
-#define ESD_USB_SJA1000_ECC_DIR		0x20
-#define ESD_USB_SJA1000_ECC_ERR		0x06
+#define ESD_USB_SJA1000_ECC_SEG		GENMASK(4, 0)
+#define ESD_USB_SJA1000_ECC_DIR		BIT(5)
+#define ESD_USB_SJA1000_ECC_ERR		BIT(2, 1)
 #define ESD_USB_SJA1000_ECC_BIT		0x00
-#define ESD_USB_SJA1000_ECC_FORM	0x40
-#define ESD_USB_SJA1000_ECC_STUFF	0x80
-#define ESD_USB_SJA1000_ECC_MASK	0xc0
+#define ESD_USB_SJA1000_ECC_FORM	BIT(6)
+#define ESD_USB_SJA1000_ECC_STUFF	BIT(7)
+#define ESD_USB_SJA1000_ECC_MASK	GENMASK(7, 6)
 
 /* esd bus state event codes */
-#define ESD_USB_BUSSTATE_MASK	0xc0
-#define ESD_USB_BUSSTATE_WARN	0x40
-#define ESD_USB_BUSSTATE_ERRPASSIVE	0x80
-#define ESD_USB_BUSSTATE_BUSOFF	0xc0
+#define ESD_USB_BUSSTATE_MASK	GENMASK(7, 6)
+#define ESD_USB_BUSSTATE_WARN	BIT(6)
+#define ESD_USB_BUSSTATE_ERRPASSIVE	BIT(7)
+#define ESD_USB_BUSSTATE_BUSOFF	GENMASK(7, 6)
 
 #define ESD_USB_RX_BUFFER_SIZE		1024
 #define ESD_USB_MAX_RX_URBS		4
@@ -228,7 +227,7 @@ static void esd_usb_rx_event(struct esd_usb_net_priv *priv,
 	struct sk_buff *skb;
 	u32 id = le32_to_cpu(msg->rx.id) & ESD_USB_IDMASK;
 
-	if (id == ESD_EV_CAN_ERROR_EXT) {
+	if (id == ESD_USB_EV_CAN_ERROR_EXT) {
 		u8 state = msg->rx.ev_can_err_ext.status;
 		u8 ecc = msg->rx.ev_can_err_ext.ecc;
 
@@ -341,13 +340,13 @@ static void esd_usb_rx_can_msg(struct esd_usb_net_priv *priv,
 		}
 
 		cf->can_id = id & ESD_USB_IDMASK;
-		can_frame_set_cc_len(cf, msg->rx.dlc & ~ESD_RTR,
+		can_frame_set_cc_len(cf, msg->rx.dlc & ~ESD_USB_RTR,
 				     priv->can.ctrlmode);
 
 		if (id & ESD_USB_EXTID)
 			cf->can_id |= CAN_EFF_FLAG;
 
-		if (msg->rx.dlc & ESD_RTR) {
+		if (msg->rx.dlc & ESD_USB_RTR) {
 			cf->can_id |= CAN_RTR_FLAG;
 		} else {
 			for (i = 0; i < cf->len; i++)
@@ -652,9 +651,9 @@ static int esd_usb_start(struct esd_usb_net_priv *priv)
 	msg->filter.net = priv->index;
 	msg->filter.option = ESD_USB_ID_ENABLE; /* start with segment 0 */
 	for (i = 0; i < ESD_USB_MAX_ID_SEGMENT; i++)
-		msg->filter.mask[i] = cpu_to_le32(0xffffffff);
+		msg->filter.mask[i] = cpu_to_le32(GENMASK(31, 0));
 	/* enable 29bit extended IDs */
-	msg->filter.mask[ESD_USB_MAX_ID_SEGMENT] = cpu_to_le32(0x00000001);
+	msg->filter.mask[ESD_USB_MAX_ID_SEGMENT] = cpu_to_le32(BIT(0));
 
 	err = esd_usb_send_msg(dev, msg);
 	if (err)
@@ -767,7 +766,7 @@ static netdev_tx_t esd_usb_start_xmit(struct sk_buff *skb,
 	msg->tx.id = cpu_to_le32(cf->can_id & CAN_ERR_MASK);
 
 	if (cf->can_id & CAN_RTR_FLAG)
-		msg->tx.dlc |= ESD_RTR;
+		msg->tx.dlc |= ESD_USB_RTR;
 
 	if (cf->can_id & CAN_EFF_FLAG)
 		msg->tx.id |= cpu_to_le32(ESD_USB_EXTID);
@@ -796,7 +795,7 @@ static netdev_tx_t esd_usb_start_xmit(struct sk_buff *skb,
 	context->echo_index = i;
 
 	/* hnd must not be 0 - MSB is stripped in txdone handling */
-	msg->tx.hnd = 0x80000000 | i; /* returned in TX done message */
+	msg->tx.hnd = BIT(31) | i; /* returned in TX done message */
 
 	usb_fill_bulk_urb(urb, dev->udev, usb_sndbulkpipe(dev->udev, 2), buf,
 			  msg->hdr.len * sizeof(u32), /* convert to # of bytes */