Commit cf9a2f63 authored by Masahiro Yamada's avatar Masahiro Yamada Committed by Linus Walleij

pinctrl: uniphier: remove pointless pin-mux settings for PH1-LD11

This SoC has no SD card controller.  Nor does it have USB port3.
These pin-mux settings have no point.

Fixes: 70f2f9c4 ("pinctrl: uniphier: add UniPhier PH1-LD11 pinctrl driver")
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 276993dd
......@@ -485,8 +485,6 @@ static const int i2c4_muxvals[] = {1, 1};
static const unsigned nand_pins[] = {3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14,
15, 16, 17};
static const int nand_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
static const unsigned sd_pins[] = {10, 11, 12, 13, 14, 15, 16, 17};
static const int sd_muxvals[] = {3, 3, 3, 3, 3, 3, 3, 3}; /* No SDVOLC */
static const unsigned system_bus_pins[] = {1, 2, 6, 7, 8, 9, 10, 11, 12, 13,
14, 15, 16, 17};
static const int system_bus_muxvals[] = {0, 0, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
......@@ -507,8 +505,6 @@ static const unsigned usb1_pins[] = {48, 49};
static const int usb1_muxvals[] = {0, 0};
static const unsigned usb2_pins[] = {50, 51};
static const int usb2_muxvals[] = {0, 0};
static const unsigned usb3_pins[] = {52, 53};
static const int usb3_muxvals[] = {0, 0};
static const unsigned port_range_pins[] = {
159, 160, 161, 162, 163, 164, 165, 166, /* PORT0x */
0, 1, 2, 3, 4, 5, 6, 7, /* PORT1x */
......@@ -598,7 +594,6 @@ static const struct uniphier_pinctrl_group uniphier_ld11_groups[] = {
UNIPHIER_PINCTRL_GROUP(i2c3),
UNIPHIER_PINCTRL_GROUP(i2c4),
UNIPHIER_PINCTRL_GROUP(nand),
UNIPHIER_PINCTRL_GROUP(sd),
UNIPHIER_PINCTRL_GROUP(system_bus),
UNIPHIER_PINCTRL_GROUP(system_bus_cs1),
UNIPHIER_PINCTRL_GROUP(uart0),
......@@ -608,7 +603,6 @@ static const struct uniphier_pinctrl_group uniphier_ld11_groups[] = {
UNIPHIER_PINCTRL_GROUP(usb0),
UNIPHIER_PINCTRL_GROUP(usb1),
UNIPHIER_PINCTRL_GROUP(usb2),
UNIPHIER_PINCTRL_GROUP(usb3),
UNIPHIER_PINCTRL_GROUP_GPIO_RANGE_PORT(port_range),
UNIPHIER_PINCTRL_GROUP_GPIO_RANGE_IRQ(xirq),
UNIPHIER_PINCTRL_GROUP_GPIO_RANGE_IRQ(xirq_alternatives),
......@@ -826,7 +820,6 @@ static const char * const i2c1_groups[] = {"i2c1"};
static const char * const i2c3_groups[] = {"i2c3"};
static const char * const i2c4_groups[] = {"i2c4"};
static const char * const nand_groups[] = {"nand"};
static const char * const sd_groups[] = {"sd"};
static const char * const system_bus_groups[] = {"system_bus",
"system_bus_cs1"};
static const char * const uart0_groups[] = {"uart0"};
......@@ -836,7 +829,6 @@ static const char * const uart3_groups[] = {"uart3"};
static const char * const usb0_groups[] = {"usb0"};
static const char * const usb1_groups[] = {"usb1"};
static const char * const usb2_groups[] = {"usb2"};
static const char * const usb3_groups[] = {"usb3"};
static const char * const port_groups[] = {
"port00", "port01", "port02", "port03",
"port04", "port05", "port06", "port07",
......@@ -907,7 +899,6 @@ static const struct uniphier_pinmux_function uniphier_ld11_functions[] = {
UNIPHIER_PINMUX_FUNCTION(i2c3),
UNIPHIER_PINMUX_FUNCTION(i2c4),
UNIPHIER_PINMUX_FUNCTION(nand),
UNIPHIER_PINMUX_FUNCTION(sd),
UNIPHIER_PINMUX_FUNCTION(system_bus),
UNIPHIER_PINMUX_FUNCTION(uart0),
UNIPHIER_PINMUX_FUNCTION(uart1),
......@@ -916,7 +907,6 @@ static const struct uniphier_pinmux_function uniphier_ld11_functions[] = {
UNIPHIER_PINMUX_FUNCTION(usb0),
UNIPHIER_PINMUX_FUNCTION(usb1),
UNIPHIER_PINMUX_FUNCTION(usb2),
UNIPHIER_PINMUX_FUNCTION(usb3),
UNIPHIER_PINMUX_FUNCTION(port),
UNIPHIER_PINMUX_FUNCTION(xirq),
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment