net: dsa: qca8k: introduce single mii read/write lo/hi

It may be useful to read/write just the lo or hi half of a reg.

This is especially useful for phy poll with the use of mdio master.
The mdio master reg is composed by the first 16 bit related to setup and
the other half with the returned data or data to write.

Refactor the mii function to permit single mii read/write of lo or hi
half of the reg.
Tested-by: Ronald Wahl <ronald.wahl@raritan.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/dsa/qca/qca8k-8xxx.c

@@ -37,42 +37,104 @@ qca8k_split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page)
 }
 
 static int
-qca8k_mii_read32(struct mii_bus *bus, int phy_id, u32 regnum, u32 *val)
+qca8k_mii_write_lo(struct mii_bus *bus, int phy_id, u32 regnum, u32 val)
 {
 	int ret;
+	u16 lo;
 
-	ret = bus->read(bus, phy_id, regnum);
-	if (ret >= 0) {
-		*val = ret;
-		ret = bus->read(bus, phy_id, regnum + 1);
-		*val |= ret << 16;
-	}
+	lo = val & 0xffff;
+	ret = bus->write(bus, phy_id, regnum, lo);
+	if (ret < 0)
+		dev_err_ratelimited(&bus->dev,
+				    "failed to write qca8k 32bit lo register\n");
 
-	if (ret < 0) {
+	return ret;
+}
+
+static int
+qca8k_mii_write_hi(struct mii_bus *bus, int phy_id, u32 regnum, u32 val)
+{
+	int ret;
+	u16 hi;
+
+	hi = (u16)(val >> 16);
+	ret = bus->write(bus, phy_id, regnum, hi);
+	if (ret < 0)
 		dev_err_ratelimited(&bus->dev,
-				    "failed to read qca8k 32bit register\n");
-		*val = 0;
-		return ret;
-	}
+				    "failed to write qca8k 32bit hi register\n");
+
+	return ret;
+}
+
+static int
+qca8k_mii_read_lo(struct mii_bus *bus, int phy_id, u32 regnum, u32 *val)
+{
+	int ret;
+
+	ret = bus->read(bus, phy_id, regnum);
+	if (ret < 0)
+		goto err;
 
+	*val = ret & 0xffff;
 	return 0;
+
+err:
+	dev_err_ratelimited(&bus->dev,
+			    "failed to read qca8k 32bit lo register\n");
+	*val = 0;
+
+	return ret;
 }
 
-static void
-qca8k_mii_write32(struct mii_bus *bus, int phy_id, u32 regnum, u32 val)
+static int
+qca8k_mii_read_hi(struct mii_bus *bus, int phy_id, u32 regnum, u32 *val)
 {
-	u16 lo, hi;
 	int ret;
 
-	lo = val & 0xffff;
-	hi = (u16)(val >> 16);
+	ret = bus->read(bus, phy_id, regnum);
+	if (ret < 0)
+		goto err;
 
-	ret = bus->write(bus, phy_id, regnum, lo);
-	if (ret >= 0)
-		ret = bus->write(bus, phy_id, regnum + 1, hi);
+	*val = ret << 16;
+	return 0;
+
+err:
+	dev_err_ratelimited(&bus->dev,
+			    "failed to read qca8k 32bit hi register\n");
+	*val = 0;
+
+	return ret;
+}
+
+static int
+qca8k_mii_read32(struct mii_bus *bus, int phy_id, u32 regnum, u32 *val)
+{
+	u32 hi, lo;
+	int ret;
+
+	*val = 0;
+
+	ret = qca8k_mii_read_lo(bus, phy_id, regnum, &lo);
 	if (ret < 0)
-		dev_err_ratelimited(&bus->dev,
-				    "failed to write qca8k 32bit register\n");
+		goto err;
+
+	ret = qca8k_mii_read_hi(bus, phy_id, regnum + 1, &hi);
+	if (ret < 0)
+		goto err;
+
+	*val = lo | hi;
+
+err:
+	return ret;
+}
+
+static void
+qca8k_mii_write32(struct mii_bus *bus, int phy_id, u32 regnum, u32 val)
+{
+	if (qca8k_mii_write_lo(bus, phy_id, regnum, val) < 0)
+		return;
+
+	qca8k_mii_write_hi(bus, phy_id, regnum + 1, val);
 }
 
 static int