Commit cfc3d6c4 authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab

Merge branch 'topic/r820t' into patchwork

* topic/r820t: (31 commits)
  [media] r820t: Don't divide the IF by two
  [media] r820t: disable auto gain/VGA setting
  [media] rtl2832: Fix IF calculus
  [media] r820t: put it into automatic gain mode
  [media] r820t: Fix hp_cor filter mask
  [media] r820t: fix PLL calculus
  [media] r820t: Don't put it in standby if not initialized yet
  [media] r820t: avoid rewrite all regs when not needed
  [media] r820t: Allow disabling IMR callibration
  [media] r820t: add a commented code for GPIO
  [media] r820t: add IMR calibrate code
  [media] r820t: proper initialize the PLL register
  [media] r820t: use usleep_range()
  [media] r820t: fix prefix of the r820t_read() function
  [media] r820t: split the function that read cached regs
  [media] r820t: better report signal strength
  [media] r820t: add support for diplexer
  [media] r820t: Show the read data in the bit-reversed order
  [media] r820t: use the second table for 7MHz
  [media] r820t: Invert bits for read ops
  ...
parents 542b329f 396f3659
......@@ -380,13 +380,41 @@ static int rtl2832_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
return ret;
}
static int rtl2832_init(struct dvb_frontend *fe)
static int rtl2832_set_if(struct dvb_frontend *fe, u32 if_freq)
{
struct rtl2832_priv *priv = fe->demodulator_priv;
int i, ret, len;
u8 en_bbin;
int ret;
u64 pset_iffreq;
u8 en_bbin = (if_freq == 0 ? 0x1 : 0x0);
/*
* PSET_IFFREQ = - floor((IfFreqHz % CrystalFreqHz) * pow(2, 22)
* / CrystalFreqHz)
*/
pset_iffreq = if_freq % priv->cfg.xtal;
pset_iffreq *= 0x400000;
pset_iffreq = div_u64(pset_iffreq, priv->cfg.xtal);
pset_iffreq = -pset_iffreq;
pset_iffreq = pset_iffreq & 0x3fffff;
dev_dbg(&priv->i2c->dev, "%s: if_frequency=%d pset_iffreq=%08x\n",
__func__, if_freq, (unsigned)pset_iffreq);
ret = rtl2832_wr_demod_reg(priv, DVBT_EN_BBIN, en_bbin);
if (ret)
return ret;
ret = rtl2832_wr_demod_reg(priv, DVBT_PSET_IFFREQ, pset_iffreq);
return (ret);
}
static int rtl2832_init(struct dvb_frontend *fe)
{
struct rtl2832_priv *priv = fe->demodulator_priv;
const struct rtl2832_reg_value *init;
int i, ret, len;
/* initialization values for the demodulator registers */
struct rtl2832_reg_value rtl2832_initial_regs[] = {
......@@ -432,22 +460,10 @@ static int rtl2832_init(struct dvb_frontend *fe)
{DVBT_TR_THD_SET2, 0x6},
{DVBT_TRK_KC_I2, 0x5},
{DVBT_CR_THD_SET2, 0x1},
{DVBT_SPEC_INV, 0x0},
};
dev_dbg(&priv->i2c->dev, "%s:\n", __func__);
en_bbin = (priv->cfg.if_dvbt == 0 ? 0x1 : 0x0);
/*
* PSET_IFFREQ = - floor((IfFreqHz % CrystalFreqHz) * pow(2, 22)
* / CrystalFreqHz)
*/
pset_iffreq = priv->cfg.if_dvbt % priv->cfg.xtal;
pset_iffreq *= 0x400000;
pset_iffreq = div_u64(pset_iffreq, priv->cfg.xtal);
pset_iffreq = pset_iffreq & 0x3fffff;
for (i = 0; i < ARRAY_SIZE(rtl2832_initial_regs); i++) {
ret = rtl2832_wr_demod_reg(priv, rtl2832_initial_regs[i].reg,
rtl2832_initial_regs[i].value);
......@@ -472,6 +488,10 @@ static int rtl2832_init(struct dvb_frontend *fe)
len = ARRAY_SIZE(rtl2832_tuner_init_e4000);
init = rtl2832_tuner_init_e4000;
break;
case RTL2832_TUNER_R820T:
len = ARRAY_SIZE(rtl2832_tuner_init_r820t);
init = rtl2832_tuner_init_r820t;
break;
default:
ret = -EINVAL;
goto err;
......@@ -483,14 +503,26 @@ static int rtl2832_init(struct dvb_frontend *fe)
goto err;
}
/* if frequency settings */
ret = rtl2832_wr_demod_reg(priv, DVBT_EN_BBIN, en_bbin);
if (!fe->ops.tuner_ops.get_if_frequency) {
ret = rtl2832_set_if(fe, priv->cfg.if_dvbt);
if (ret)
goto err;
}
ret = rtl2832_wr_demod_reg(priv, DVBT_PSET_IFFREQ, pset_iffreq);
if (ret)
goto err;
/*
* r820t NIM code does a software reset here at the demod -
* may not be needed, as there's already a software reset at set_params()
*/
#if 1
/* soft reset */
ret = rtl2832_wr_demod_reg(priv, DVBT_SOFT_RST, 0x1);
if (ret)
goto err;
ret = rtl2832_wr_demod_reg(priv, DVBT_SOFT_RST, 0x0);
if (ret)
goto err;
#endif
priv->sleeping = false;
......@@ -564,6 +596,19 @@ static int rtl2832_set_frontend(struct dvb_frontend *fe)
if (fe->ops.tuner_ops.set_params)
fe->ops.tuner_ops.set_params(fe);
/* If the frontend has get_if_frequency(), use it */
if (fe->ops.tuner_ops.get_if_frequency) {
u32 if_freq;
ret = fe->ops.tuner_ops.get_if_frequency(fe, &if_freq);
if (ret)
goto err;
ret = rtl2832_set_if(fe, if_freq);
if (ret)
goto err;
}
switch (c->bandwidth_hz) {
case 6000000:
i = 0;
......
......@@ -52,6 +52,7 @@ struct rtl2832_config {
#define RTL2832_TUNER_FC0012 0x26
#define RTL2832_TUNER_E4000 0x27
#define RTL2832_TUNER_FC0013 0x29
#define RTL2832_TUNER_R820T 0x2a
u8 tuner;
};
......
......@@ -267,6 +267,7 @@ static const struct rtl2832_reg_value rtl2832_tuner_init_tua9001[] = {
{DVBT_OPT_ADC_IQ, 0x1},
{DVBT_AD_AVI, 0x0},
{DVBT_AD_AVQ, 0x0},
{DVBT_SPEC_INV, 0x0},
};
static const struct rtl2832_reg_value rtl2832_tuner_init_fc0012[] = {
......@@ -300,6 +301,7 @@ static const struct rtl2832_reg_value rtl2832_tuner_init_fc0012[] = {
{DVBT_GI_PGA_STATE, 0x0},
{DVBT_EN_AGC_PGA, 0x1},
{DVBT_IF_AGC_MAN, 0x0},
{DVBT_SPEC_INV, 0x0},
};
static const struct rtl2832_reg_value rtl2832_tuner_init_e4000[] = {
......@@ -337,6 +339,32 @@ static const struct rtl2832_reg_value rtl2832_tuner_init_e4000[] = {
{DVBT_REG_MONSEL, 0x1},
{DVBT_REG_MON, 0x1},
{DVBT_REG_4MSEL, 0x0},
{DVBT_SPEC_INV, 0x0},
};
static const struct rtl2832_reg_value rtl2832_tuner_init_r820t[] = {
{DVBT_DAGC_TRG_VAL, 0x39},
{DVBT_AGC_TARG_VAL_0, 0x0},
{DVBT_AGC_TARG_VAL_8_1, 0x40},
{DVBT_AAGC_LOOP_GAIN, 0x16},
{DVBT_LOOP_GAIN2_3_0, 0x8},
{DVBT_LOOP_GAIN2_4, 0x1},
{DVBT_LOOP_GAIN3, 0x18},
{DVBT_VTOP1, 0x35},
{DVBT_VTOP2, 0x21},
{DVBT_VTOP3, 0x21},
{DVBT_KRF1, 0x0},
{DVBT_KRF2, 0x40},
{DVBT_KRF3, 0x10},
{DVBT_KRF4, 0x10},
{DVBT_IF_AGC_MIN, 0x80},
{DVBT_IF_AGC_MAX, 0x7f},
{DVBT_RF_AGC_MIN, 0x80},
{DVBT_RF_AGC_MAX, 0x7f},
{DVBT_POLAR_RF_AGC, 0x0},
{DVBT_POLAR_IF_AGC, 0x0},
{DVBT_AD7_SETTING, 0xe9f4},
{DVBT_SPEC_INV, 0x1},
};
#endif /* RTL2832_PRIV_H */
......@@ -248,4 +248,11 @@ config MEDIA_TUNER_IT913X
default m if !MEDIA_SUBDRV_AUTOSELECT
help
ITE Tech IT913x silicon tuner driver.
config MEDIA_TUNER_R820T
tristate "Rafael Micro R820T silicon tuner"
depends on MEDIA_SUPPORT && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
Rafael Micro R820T silicon tuner driver.
endmenu
......@@ -35,6 +35,7 @@ obj-$(CONFIG_MEDIA_TUNER_FC0011) += fc0011.o
obj-$(CONFIG_MEDIA_TUNER_FC0012) += fc0012.o
obj-$(CONFIG_MEDIA_TUNER_FC0013) += fc0013.o
obj-$(CONFIG_MEDIA_TUNER_IT913X) += tuner_it913x.o
obj-$(CONFIG_MEDIA_TUNER_R820T) += r820t.o
ccflags-y += -I$(srctree)/drivers/media/dvb-core
ccflags-y += -I$(srctree)/drivers/media/dvb-frontends
This diff is collapsed.
/*
* Elonics R820T silicon tuner driver
*
* Copyright (C) 2012 Antti Palosaari <crope@iki.fi>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#ifndef R820T_H
#define R820T_H
#include <linux/kconfig.h>
#include "dvb_frontend.h"
enum r820t_chip {
CHIP_R820T,
CHIP_R620D,
CHIP_R828D,
CHIP_R828,
CHIP_R828S,
CHIP_R820C,
};
struct r820t_config {
u8 i2c_addr; /* 0x34 */
u32 xtal;
enum r820t_chip rafael_chip;
unsigned max_i2c_msg_len;
bool use_diplexer;
};
#if IS_ENABLED(CONFIG_MEDIA_TUNER_R820T)
struct dvb_frontend *r820t_attach(struct dvb_frontend *fe,
struct i2c_adapter *i2c,
const struct r820t_config *cfg);
#else
static inline struct dvb_frontend *r820t_attach(struct dvb_frontend *fe,
struct i2c_adapter *i2c,
const struct r820t_config *cfg)
{
pr_warn("%s: driver disabled by Kconfig\n", __func__);
return NULL;
}
#endif
#endif
......@@ -143,6 +143,7 @@ config DVB_USB_RTL28XXU
select MEDIA_TUNER_FC0013 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_E4000 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_FC2580 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_R820T if MEDIA_SUBDRV_AUTOSELECT
help
Say Y here to support the Realtek RTL28xxU DVB USB receiver.
......@@ -33,6 +33,7 @@
#include "e4000.h"
#include "fc2580.h"
#include "tua9001.h"
#include "r820t.h"
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
......@@ -375,6 +376,7 @@ static int rtl2832u_read_config(struct dvb_usb_device *d)
struct rtl28xxu_req req_mxl5007t = {0xd9c0, CMD_I2C_RD, 1, buf};
struct rtl28xxu_req req_e4000 = {0x02c8, CMD_I2C_RD, 1, buf};
struct rtl28xxu_req req_tda18272 = {0x00c0, CMD_I2C_RD, 2, buf};
struct rtl28xxu_req req_r820t = {0x0034, CMD_I2C_RD, 5, buf};
dev_dbg(&d->udev->dev, "%s:\n", __func__);
......@@ -479,6 +481,14 @@ static int rtl2832u_read_config(struct dvb_usb_device *d)
goto found;
}
/* check R820T by reading tuner stats at I2C addr 0x1a */
ret = rtl28xxu_ctrl_msg(d, &req_r820t);
if (ret == 0) {
priv->tuner = TUNER_RTL2832_R820T;
priv->tuner_name = "R820T";
goto found;
}
found:
dev_dbg(&d->udev->dev, "%s: tuner=%s\n", __func__, priv->tuner_name);
......@@ -589,6 +599,12 @@ static struct rtl2832_config rtl28xxu_rtl2832_e4000_config = {
.tuner = TUNER_RTL2832_E4000,
};
static struct rtl2832_config rtl28xxu_rtl2832_r820t_config = {
.i2c_addr = 0x10,
.xtal = 28800000,
.tuner = TUNER_RTL2832_R820T,
};
static int rtl2832u_fc0012_tuner_callback(struct dvb_usb_device *d,
int cmd, int arg)
{
......@@ -728,6 +744,9 @@ static int rtl2832u_frontend_attach(struct dvb_usb_adapter *adap)
case TUNER_RTL2832_E4000:
rtl2832_config = &rtl28xxu_rtl2832_e4000_config;
break;
case TUNER_RTL2832_R820T:
rtl2832_config = &rtl28xxu_rtl2832_r820t_config;
break;
default:
dev_err(&d->udev->dev, "%s: unknown tuner=%s\n",
KBUILD_MODNAME, priv->tuner_name);
......@@ -840,6 +859,13 @@ static const struct fc0012_config rtl2832u_fc0012_config = {
.xtal_freq = FC_XTAL_28_8_MHZ,
};
static const struct r820t_config rtl2832u_r820t_config = {
.i2c_addr = 0x1a,
.xtal = 28800000,
.max_i2c_msg_len = 2,
.rafael_chip = CHIP_R820T,
};
static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap)
{
int ret;
......@@ -889,6 +915,14 @@ static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap)
fe = dvb_attach(tua9001_attach, adap->fe[0], &d->i2c_adap,
&rtl2832u_tua9001_config);
break;
case TUNER_RTL2832_R820T:
fe = dvb_attach(r820t_attach, adap->fe[0], &d->i2c_adap,
&rtl2832u_r820t_config);
/* Use tuner to get the signal strength */
adap->fe[0]->ops.read_signal_strength =
adap->fe[0]->ops.tuner_ops.get_rf_strength;
break;
default:
fe = NULL;
dev_err(&d->udev->dev, "%s: unknown tuner=%d\n", KBUILD_MODNAME,
......
......@@ -82,6 +82,7 @@ enum rtl28xxu_tuner {
TUNER_RTL2832_E4000,
TUNER_RTL2832_TDA18272,
TUNER_RTL2832_FC0013,
TUNER_RTL2832_R820T,
};
struct rtl28xxu_req {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment