Merge branch 'mlxsw'

Jiri Pirko says:

====================
Introduce Mellanox Technologies Switch ASICs switchdev drivers

This patchset introduces Mellanox Technologies Switch driver infrastructure
and support for SwitchX-2 ASIC.

The driver is divided into 3 logical parts:
1) Bus - implements switch bus interface. Currently only PCI bus is
   implemented, but more buses will be added in the future. Namely I2C
   and SGMII.
   (patch #2)
2) Driver - implemements of ASIC-specific functions.
   Currently SwitchX-2 ASIC is supported, but a plan exists to introduce
   support for Spectrum ASIC in the near future.
   (patch #4)
3) Core - infrastructure that glues buses and drivers together.
   It implements register access logic (EMADs) and takes care of RX traps
   and events.
   (patch #1 and #3)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS

@@ -6645,6 +6645,15 @@ W:	http://www.mellanox.com
 Q:	http://patchwork.ozlabs.org/project/netdev/list/
 F:	drivers/net/ethernet/mellanox/mlx4/en_*
 
+MELLANOX ETHERNET SWITCH DRIVERS
+M:	Jiri Pirko <jiri@mellanox.com>
+M:	Ido Schimmel <idosch@mellanox.com>
+L:	netdev@vger.kernel.org
+S:	Supported
+W:	http://www.mellanox.com
+Q:	http://patchwork.ozlabs.org/project/netdev/list/
+F:	drivers/net/ethernet/mellanox/mlxsw/
+
 MEMORY MANAGEMENT
 L:	linux-mm@kvack.org
 W:	http://www.linux-mm.org

drivers/net/ethernet/mellanox/Kconfig

@@ -18,5 +18,6 @@ if NET_VENDOR_MELLANOX
 
 source "drivers/net/ethernet/mellanox/mlx4/Kconfig"
 source "drivers/net/ethernet/mellanox/mlx5/core/Kconfig"
+source "drivers/net/ethernet/mellanox/mlxsw/Kconfig"
 
 endif # NET_VENDOR_MELLANOX

drivers/net/ethernet/mellanox/Makefile

@@ -4,3 +4,4 @@
 
 obj-$(CONFIG_MLX4_CORE) += mlx4/
 obj-$(CONFIG_MLX5_CORE) += mlx5/core/
+obj-$(CONFIG_MLXSW_CORE) += mlxsw/

drivers/net/ethernet/mellanox/mlxsw/Kconfig

+#
+# Mellanox switch drivers configuration
+#
+
+config MLXSW_CORE
+	tristate "Mellanox Technologies Switch ASICs support"
+	---help---
+	  This driver supports Mellanox Technologies Switch ASICs family.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mlxsw_core.
+
+config MLXSW_PCI
+	tristate "PCI bus implementation for Mellanox Technologies Switch ASICs"
+	depends on PCI && MLXSW_CORE
+	default m
+	---help---
+	  This is PCI bus implementation for Mellanox Technologies Switch ASICs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mlxsw_pci.
+
+config MLXSW_SWITCHX2
+	tristate "Mellanox Technologies SwitchX-2 support"
+	depends on MLXSW_CORE && NET_SWITCHDEV
+	default m
+	---help---
+	  This driver supports Mellanox Technologies SwitchX-2 Ethernet
+	  Switch ASICs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mlxsw_switchx2.

drivers/net/ethernet/mellanox/mlxsw/Makefile

+obj-$(CONFIG_MLXSW_CORE)	+= mlxsw_core.o
+mlxsw_core-objs			:= core.o
+obj-$(CONFIG_MLXSW_PCI)		+= mlxsw_pci.o
+mlxsw_pci-objs			:= pci.o
+obj-$(CONFIG_MLXSW_SWITCHX2)	+= mlxsw_switchx2.o
+mlxsw_switchx2-objs		:= switchx2.o

drivers/net/ethernet/mellanox/mlxsw/core.h

+/*
+ * drivers/net/ethernet/mellanox/mlxsw/core.h
+ * Copyright (c) 2015 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2015 Jiri Pirko <jiri@mellanox.com>
+ * Copyright (c) 2015 Ido Schimmel <idosch@mellanox.com>
+ * Copyright (c) 2015 Elad Raz <eladr@mellanox.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the names of the copyright holders nor the names of its
+ *    contributors may be used to endorse or promote products derived from
+ *    this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _MLXSW_CORE_H
+#define _MLXSW_CORE_H
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/gfp.h>
+#include <linux/types.h>
+#include <linux/skbuff.h>
+
+#include "trap.h"
+#include "reg.h"
+
+#include "cmd.h"
+
+#define MLXSW_MODULE_ALIAS_PREFIX "mlxsw-driver-"
+#define MODULE_MLXSW_DRIVER_ALIAS(kind)	\
+	MODULE_ALIAS(MLXSW_MODULE_ALIAS_PREFIX kind)
+
+#define MLXSW_DEVICE_KIND_SWITCHX2 "switchx2"
+
+struct mlxsw_core;
+struct mlxsw_driver;
+struct mlxsw_bus;
+struct mlxsw_bus_info;
+
+int mlxsw_core_driver_register(struct mlxsw_driver *mlxsw_driver);
+void mlxsw_core_driver_unregister(struct mlxsw_driver *mlxsw_driver);
+
+int mlxsw_core_bus_device_register(const struct mlxsw_bus_info *mlxsw_bus_info,
+				   const struct mlxsw_bus *mlxsw_bus,
+				   void *bus_priv);
+void mlxsw_core_bus_device_unregister(struct mlxsw_core *mlxsw_core);
+
+struct mlxsw_tx_info {
+	u8 local_port;
+	bool is_emad;
+};
+
+int mlxsw_core_skb_transmit(void *driver_priv, struct sk_buff *skb,
+			    const struct mlxsw_tx_info *tx_info);
+
+struct mlxsw_rx_listener {
+	void (*func)(struct sk_buff *skb, u8 local_port, void *priv);
+	u8 local_port;
+	u16 trap_id;
+};
+
+struct mlxsw_event_listener {
+	void (*func)(const struct mlxsw_reg_info *reg,
+		     char *payload, void *priv);
+	enum mlxsw_event_trap_id trap_id;
+};
+
+int mlxsw_core_rx_listener_register(struct mlxsw_core *mlxsw_core,
+				    const struct mlxsw_rx_listener *rxl,
+				    void *priv);
+void mlxsw_core_rx_listener_unregister(struct mlxsw_core *mlxsw_core,
+				       const struct mlxsw_rx_listener *rxl,
+				       void *priv);
+
+int mlxsw_core_event_listener_register(struct mlxsw_core *mlxsw_core,
+				       const struct mlxsw_event_listener *el,
+				       void *priv);
+void mlxsw_core_event_listener_unregister(struct mlxsw_core *mlxsw_core,
+					  const struct mlxsw_event_listener *el,
+					  void *priv);
+
+int mlxsw_reg_query(struct mlxsw_core *mlxsw_core,
+		    const struct mlxsw_reg_info *reg, char *payload);
+int mlxsw_reg_write(struct mlxsw_core *mlxsw_core,
+		    const struct mlxsw_reg_info *reg, char *payload);
+
+struct mlxsw_rx_info {
+	u16 sys_port;
+	int trap_id;
+};
+
+void mlxsw_core_skb_receive(struct mlxsw_core *mlxsw_core, struct sk_buff *skb,
+			    struct mlxsw_rx_info *rx_info);
+
+#define MLXSW_CONFIG_PROFILE_SWID_COUNT 8
+
+struct mlxsw_swid_config {
+	u8	used_type:1,
+		used_properties:1;
+	u8	type;
+	u8	properties;
+};
+
+struct mlxsw_config_profile {
+	u16	used_max_vepa_channels:1,
+		used_max_lag:1,
+		used_max_port_per_lag:1,
+		used_max_mid:1,
+		used_max_pgt:1,
+		used_max_system_port:1,
+		used_max_vlan_groups:1,
+		used_max_regions:1,
+		used_flood_tables:1,
+		used_flood_mode:1,
+		used_max_ib_mc:1,
+		used_max_pkey:1,
+		used_ar_sec:1,
+		used_adaptive_routing_group_cap:1;
+	u8	max_vepa_channels;
+	u16	max_lag;
+	u16	max_port_per_lag;
+	u16	max_mid;
+	u16	max_pgt;
+	u16	max_system_port;
+	u16	max_vlan_groups;
+	u16	max_regions;
+	u8	max_flood_tables;
+	u8	max_vid_flood_tables;
+	u8	flood_mode;
+	u16	max_ib_mc;
+	u16	max_pkey;
+	u8	ar_sec;
+	u16	adaptive_routing_group_cap;
+	u8	arn;
+	struct mlxsw_swid_config swid_config[MLXSW_CONFIG_PROFILE_SWID_COUNT];
+};
+
+struct mlxsw_driver {
+	struct list_head list;
+	const char *kind;
+	struct module *owner;
+	size_t priv_size;
+	int (*init)(void *driver_priv, struct mlxsw_core *mlxsw_core,
+		    const struct mlxsw_bus_info *mlxsw_bus_info);
+	void (*fini)(void *driver_priv);
+	void (*txhdr_construct)(struct sk_buff *skb,
+				const struct mlxsw_tx_info *tx_info);
+	u8 txhdr_len;
+	const struct mlxsw_config_profile *profile;
+};
+
+struct mlxsw_bus {
+	const char *kind;
+	int (*init)(void *bus_priv, struct mlxsw_core *mlxsw_core,
+		    const struct mlxsw_config_profile *profile);
+	void (*fini)(void *bus_priv);
+	int (*skb_transmit)(void *bus_priv, struct sk_buff *skb,
+			    const struct mlxsw_tx_info *tx_info);
+	int (*cmd_exec)(void *bus_priv, u16 opcode, u8 opcode_mod,
+			u32 in_mod, bool out_mbox_direct,
+			char *in_mbox, size_t in_mbox_size,
+			char *out_mbox, size_t out_mbox_size,
+			u8 *p_status);
+};
+
+struct mlxsw_bus_info {
+	const char *device_kind;
+	const char *device_name;
+	struct device *dev;
+	struct {
+		u16 major;
+		u16 minor;
+		u16 subminor;
+	} fw_rev;
+	u8 vsd[MLXSW_CMD_BOARDINFO_VSD_LEN];
+	u8 psid[MLXSW_CMD_BOARDINFO_PSID_LEN];
+};
+
+#endif

drivers/net/ethernet/mellanox/mlxsw/emad.h

+/*
+ * drivers/net/ethernet/mellanox/mlxsw/emad.h
+ * Copyright (c) 2015 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2015 Ido Schimmel <idosch@mellanox.com>
+ * Copyright (c) 2015 Jiri Pirko <jiri@mellanox.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the names of the copyright holders nor the names of its
+ *    contributors may be used to endorse or promote products derived from
+ *    this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _MLXSW_EMAD_H
+#define _MLXSW_EMAD_H
+
+#define MLXSW_EMAD_MAX_FRAME_LEN 1518	/* Length in u8 */
+#define MLXSW_EMAD_MAX_RETRY 5
+
+/* EMAD Ethernet header */
+#define MLXSW_EMAD_ETH_HDR_LEN 0x10	/* Length in u8 */
+#define MLXSW_EMAD_EH_DMAC "\x01\x02\xc9\x00\x00\x01"
+#define MLXSW_EMAD_EH_SMAC "\x00\x02\xc9\x01\x02\x03"
+#define MLXSW_EMAD_EH_ETHERTYPE 0x8932
+#define MLXSW_EMAD_EH_MLX_PROTO 0
+#define MLXSW_EMAD_EH_PROTO_VERSION 0
+
+/* EMAD TLV Types */
+enum {
+	MLXSW_EMAD_TLV_TYPE_END,
+	MLXSW_EMAD_TLV_TYPE_OP,
+	MLXSW_EMAD_TLV_TYPE_DR,
+	MLXSW_EMAD_TLV_TYPE_REG,
+	MLXSW_EMAD_TLV_TYPE_USERDATA,
+	MLXSW_EMAD_TLV_TYPE_OOBETH,
+};
+
+/* OP TLV */
+#define MLXSW_EMAD_OP_TLV_LEN 4		/* Length in u32 */
+
+enum {
+	MLXSW_EMAD_OP_TLV_CLASS_REG_ACCESS = 1,
+	MLXSW_EMAD_OP_TLV_CLASS_IPC = 2,
+};
+
+enum mlxsw_emad_op_tlv_status {
+	MLXSW_EMAD_OP_TLV_STATUS_SUCCESS,
+	MLXSW_EMAD_OP_TLV_STATUS_BUSY,
+	MLXSW_EMAD_OP_TLV_STATUS_VERSION_NOT_SUPPORTED,
+	MLXSW_EMAD_OP_TLV_STATUS_UNKNOWN_TLV,
+	MLXSW_EMAD_OP_TLV_STATUS_REGISTER_NOT_SUPPORTED,
+	MLXSW_EMAD_OP_TLV_STATUS_CLASS_NOT_SUPPORTED,
+	MLXSW_EMAD_OP_TLV_STATUS_METHOD_NOT_SUPPORTED,
+	MLXSW_EMAD_OP_TLV_STATUS_BAD_PARAMETER,
+	MLXSW_EMAD_OP_TLV_STATUS_RESOURCE_NOT_AVAILABLE,
+	MLXSW_EMAD_OP_TLV_STATUS_MESSAGE_RECEIPT_ACK,
+	MLXSW_EMAD_OP_TLV_STATUS_INTERNAL_ERROR = 0x70,
+};
+
+static inline char *mlxsw_emad_op_tlv_status_str(u8 status)
+{
+	switch (status) {
+	case MLXSW_EMAD_OP_TLV_STATUS_SUCCESS:
+		return "operation performed";
+	case MLXSW_EMAD_OP_TLV_STATUS_BUSY:
+		return "device is busy";
+	case MLXSW_EMAD_OP_TLV_STATUS_VERSION_NOT_SUPPORTED:
+		return "version not supported";
+	case MLXSW_EMAD_OP_TLV_STATUS_UNKNOWN_TLV:
+		return "unknown TLV";
+	case MLXSW_EMAD_OP_TLV_STATUS_REGISTER_NOT_SUPPORTED:
+		return "register not supported";
+	case MLXSW_EMAD_OP_TLV_STATUS_CLASS_NOT_SUPPORTED:
+		return "class not supported";
+	case MLXSW_EMAD_OP_TLV_STATUS_METHOD_NOT_SUPPORTED:
+		return "method not supported";
+	case MLXSW_EMAD_OP_TLV_STATUS_BAD_PARAMETER:
+		return "bad parameter";
+	case MLXSW_EMAD_OP_TLV_STATUS_RESOURCE_NOT_AVAILABLE:
+		return "resource not available";
+	case MLXSW_EMAD_OP_TLV_STATUS_MESSAGE_RECEIPT_ACK:
+		return "acknowledged. retransmit";
+	case MLXSW_EMAD_OP_TLV_STATUS_INTERNAL_ERROR:
+		return "internal error";
+	default:
+		return "*UNKNOWN*";
+	}
+}
+
+enum {
+	MLXSW_EMAD_OP_TLV_REQUEST,
+	MLXSW_EMAD_OP_TLV_RESPONSE
+};
+
+enum {
+	MLXSW_EMAD_OP_TLV_METHOD_QUERY = 1,
+	MLXSW_EMAD_OP_TLV_METHOD_WRITE = 2,
+	MLXSW_EMAD_OP_TLV_METHOD_SEND = 3,
+	MLXSW_EMAD_OP_TLV_METHOD_EVENT = 5,
+};
+
+/* END TLV */
+#define MLXSW_EMAD_END_TLV_LEN 1	/* Length in u32 */
+
+#endif