Staging: sources for Init manager module

Kernel Space Init-Manager works along with User-Mode
Init Manager daemon running to maintain the UART state.

Communication between user-space daemon and this module can be
	1. Via the pid written onto sysfs entry
	2. Via the rfkill subsystem

It also is a platform driver with a relevant platform device
in the board-*.c along with the list of BT/FM/GPS chip enable
gpio configuration
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/ti-st/st_kim.h

+/*
+ *  Shared Transport Line discipline driver Core
+ *	Init Manager Module header file
+ *  Copyright (C) 2009 Texas Instruments
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef ST_KIM_H
+#define ST_KIM_H
+
+#include <linux/types.h>
+#include "st.h"
+#include "st_core.h"
+#include "st_ll.h"
+#include <linux/rfkill.h>
+
+/* time in msec to wait for
+ * line discipline to be installed
+ */
+#define LDISC_TIME	500
+#define CMD_RESP_TIME	500
+#define MAKEWORD(a, b)  ((unsigned short)(((unsigned char)(a)) \
+	| ((unsigned short)((unsigned char)(b))) << 8))
+
+#define GPIO_HIGH 1
+#define GPIO_LOW  0
+
+/* the Power-On-Reset logic, requires to attempt
+ * to download firmware onto chip more than once
+ * since the self-test for chip takes a while
+ */
+#define POR_RETRY_COUNT 5
+/*
+ * legacy rfkill support where-in 3 rfkill
+ * devices are created for the 3 gpios
+ * that ST has requested
+ */
+#define LEGACY_RFKILL_SUPPORT
+/*
+ * header file for ST provided by KIM
+ */
+struct kim_data_s {
+	long uim_pid;
+	struct platform_device *kim_pdev;
+	struct completion kim_rcvd, ldisc_installed;
+	/* MAX len of the .bts firmware script name */
+	char resp_buffer[30];
+	const struct firmware *fw_entry;
+	long gpios[ST_MAX];
+	struct kobject *kim_kobj;
+/* used by kim_int_recv to validate fw response */
+	unsigned long rx_state;
+	unsigned long rx_count;
+	struct sk_buff *rx_skb;
+#ifdef LEGACY_RFKILL_SUPPORT
+	struct rfkill *rfkill[ST_MAX];
+	enum proto_type rf_protos[ST_MAX];
+#endif
+	struct st_data_s *core_data;
+};
+
+long st_kim_start(void);
+long st_kim_stop(void);
+/*
+ * called from st_tty_receive to authenticate fw_download
+ */
+void st_kim_recv(void *, const unsigned char *, long count);
+
+void st_kim_chip_toggle(enum proto_type, enum kim_gpio_state);
+
+void st_kim_complete(void);
+
+/* function called from ST KIM to ST Core, to
+ * list out the protocols registered
+ */
+void kim_st_list_protocols(struct st_data_s *, char *);
+
+/*
+ * BTS headers
+ */
+#define ACTION_SEND_COMMAND     1
+#define ACTION_WAIT_EVENT       2
+#define ACTION_SERIAL           3
+#define ACTION_DELAY            4
+#define ACTION_RUN_SCRIPT       5
+#define ACTION_REMARKS          6
+
+/*
+ *  * BRF Firmware header
+ *   */
+struct bts_header {
+	uint32_t magic;
+	uint32_t version;
+	uint8_t future[24];
+	uint8_t actions[0];
+} __attribute__ ((packed));
+
+/*
+ *  * BRF Actions structure
+ *   */
+struct bts_action {
+	uint16_t type;
+	uint16_t size;
+	uint8_t data[0];
+} __attribute__ ((packed));
+
+struct bts_action_send {
+	uint8_t data[0];
+} __attribute__ ((packed));
+
+struct bts_action_wait {
+	uint32_t msec;
+	uint32_t size;
+	uint8_t data[0];
+} __attribute__ ((packed));
+
+struct bts_action_delay {
+	uint32_t msec;
+} __attribute__ ((packed));
+
+struct bts_action_serial {
+	uint32_t baud;
+	uint32_t flow_control;
+} __attribute__ ((packed));
+
+/* for identifying the change speed HCI VS
+ * command
+ */
+struct hci_command {
+	uint8_t prefix;
+	uint16_t opcode;
+	uint8_t plen;
+	uint32_t speed;
+} __attribute__ ((packed));
+
+
+#endif /* ST_KIM_H */