arm64: dts: qcom: sm8650: remove pcie-1-phy-aux-clk and add pcie1_phy pcie1_phy_aux_clk

The PCIe Gen4x2 PHY found in the SM8650 SoCs have a second clock named
"PHY_AUX_CLK" which is an input of the Global Clock Controller (GCC) which
is muxed & gated then returned to the PHY as an input.

Remove the dummy pcie-1-phy-aux-clk clock and now the pcie1_phy exposes
2 clocks, properly add the pcie1_phy provided clocks to the Global Clock
Controller (GCC) node clocks inputs.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240502-topic-sm8x50-upstream-pcie-1-phy-aux-clk-v5-3-10c650cfeade@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

arch/arm64/boot/dts/qcom/sm8650-mtp.dts

@@ -641,10 +641,6 @@ &mdss_dsi0_phy {
 	status = "okay";
 };
 
-&pcie_1_phy_aux_clk {
-	clock-frequency = <1000>;
-};
-
 &pcie0 {
 	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
 	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;

arch/arm64/boot/dts/qcom/sm8650-qrd.dts

@@ -834,10 +834,6 @@ &mdss_dp0_out {
 	data-lanes = <0 1>;
 };
 
-&pcie_1_phy_aux_clk {
-	clock-frequency = <1000>;
-};
-
 &pcie0 {
 	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
 	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;

arch/arm64/boot/dts/qcom/sm8650.dtsi

@@ -60,11 +60,6 @@ bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk {
 			clock-mult = <1>;
 			clock-div = <2>;
 		};
-
-		pcie_1_phy_aux_clk: pcie-1-phy-aux-clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-		};
 	};
 
 	cpus {
@@ -758,8 +753,8 @@ gcc: clock-controller@100000 {
 				 <&bi_tcxo_ao_div2>,
 				 <&sleep_clk>,
 				 <&pcie0_phy>,
-				 <&pcie1_phy>,
-				 <&pcie_1_phy_aux_clk>,
+				 <&pcie1_phy QMP_PCIE_PIPE_CLK>,
+				 <&pcie1_phy QMP_PCIE_PHY_AUX_CLK>,
 				 <&ufs_mem_phy 0>,
 				 <&ufs_mem_phy 1>,
 				 <&ufs_mem_phy 2>,
@@ -2467,8 +2462,8 @@ pcie1_phy: phy@1c0e000 {
 
 			power-domains = <&gcc PCIE_1_PHY_GDSC>;
 
-			#clock-cells = <0>;
-			clock-output-names = "pcie1_pipe_clk";
+			#clock-cells = <1>;
+			clock-output-names = "pcie1_pipe_clk", "pcie1_phy_aux_clk";
 
 			#phy-cells = <0>;