Merge branch 'spi/next' of git://git.secretlab.ca/git/linux-2.6

* 'spi/next' of git://git.secretlab.ca/git/linux-2.6:
  spi/spi_bfin_sport: new driver for a SPI bus via the Blackfin SPORT peripheral
  spi/tle620x: add missing device_remove_file()

drivers/spi/Kconfig

@@ -80,6 +80,15 @@ config SPI_BFIN
 	help
 	  This is the SPI controller master driver for Blackfin 5xx processor.
 
+config SPI_BFIN_SPORT
+	tristate "SPI bus via Blackfin SPORT"
+	depends on BLACKFIN
+	help
+	  Enable support for a SPI bus via the Blackfin SPORT peripheral.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called spi_bfin_sport.
+
 config SPI_AU1550
 	tristate "Au1550/Au12x0 SPI Controller"
 	depends on (SOC_AU1550 || SOC_AU1200) && EXPERIMENTAL

drivers/spi/Makefile

@@ -13,6 +13,7 @@ obj-$(CONFIG_SPI_ALTERA)		+= spi_altera.o
 obj-$(CONFIG_SPI_ATMEL)			+= atmel_spi.o
 obj-$(CONFIG_SPI_ATH79)			+= ath79_spi.o
 obj-$(CONFIG_SPI_BFIN)			+= spi_bfin5xx.o
+obj-$(CONFIG_SPI_BFIN_SPORT)		+= spi_bfin_sport.o
 obj-$(CONFIG_SPI_BITBANG)		+= spi_bitbang.o
 obj-$(CONFIG_SPI_AU1550)		+= au1550_spi.o
 obj-$(CONFIG_SPI_BUTTERFLY)		+= spi_butterfly.o

drivers/spi/tle62x0.c

@@ -283,7 +283,7 @@ static int __devinit tle62x0_probe(struct spi_device *spi)
 	return 0;
 
  err_gpios:
-	for (; ptr > 0; ptr--)
+	while (--ptr >= 0)
 		device_remove_file(&spi->dev, gpio_attrs[ptr]);
 
 	device_remove_file(&spi->dev, &dev_attr_status_show);
@@ -301,6 +301,7 @@ static int __devexit tle62x0_remove(struct spi_device *spi)
 	for (ptr = 0; ptr < st->nr_gpio; ptr++)
 		device_remove_file(&spi->dev, gpio_attrs[ptr]);
 
+	device_remove_file(&spi->dev, &dev_attr_status_show);
 	kfree(st);
 	return 0;
 }