Commit d0347f98 authored by Dave Stevenson's avatar Dave Stevenson Committed by Mauro Carvalho Chehab

media: i2c: imx290: Use CSI timings as per datasheet

Commit "98e0500e media: i2c: imx290: Add configurable link frequency
and pixel rate" added support for the increased link frequencies
on 2 data lanes, but didn't update the CSI timing registers in
accordance with the datasheet.

Use the specified settings.
Signed-off-by: default avatarDave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: default avatarAlexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: default avatarLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: default avatarSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@kernel.org>
parent de395577
...@@ -193,6 +193,18 @@ struct imx290_mode { ...@@ -193,6 +193,18 @@ struct imx290_mode {
u32 data_size; u32 data_size;
}; };
struct imx290_csi_cfg {
u16 repetition;
u16 tclkpost;
u16 thszero;
u16 thsprepare;
u16 tclktrail;
u16 thstrail;
u16 tclkzero;
u16 tclkprepare;
u16 tlpx;
};
struct imx290 { struct imx290 {
struct device *dev; struct device *dev;
struct clk *xclk; struct clk *xclk;
...@@ -292,16 +304,6 @@ static const struct imx290_regval imx290_1080p_settings[] = { ...@@ -292,16 +304,6 @@ static const struct imx290_regval imx290_1080p_settings[] = {
{ IMX290_INCKSEL4, 0x01 }, { IMX290_INCKSEL4, 0x01 },
{ IMX290_INCKSEL5, 0x1a }, { IMX290_INCKSEL5, 0x1a },
{ IMX290_INCKSEL6, 0x1a }, { IMX290_INCKSEL6, 0x1a },
/* data rate settings */
{ IMX290_REPETITION, 0x10 },
{ IMX290_TCLKPOST, 87 },
{ IMX290_THSZERO, 55 },
{ IMX290_THSPREPARE, 31 },
{ IMX290_TCLKTRAIL, 31 },
{ IMX290_THSTRAIL, 31 },
{ IMX290_TCLKZERO, 119 },
{ IMX290_TCLKPREPARE, 31 },
{ IMX290_TLPX, 23 },
}; };
static const struct imx290_regval imx290_720p_settings[] = { static const struct imx290_regval imx290_720p_settings[] = {
...@@ -317,16 +319,6 @@ static const struct imx290_regval imx290_720p_settings[] = { ...@@ -317,16 +319,6 @@ static const struct imx290_regval imx290_720p_settings[] = {
{ IMX290_INCKSEL4, 0x01 }, { IMX290_INCKSEL4, 0x01 },
{ IMX290_INCKSEL5, 0x1a }, { IMX290_INCKSEL5, 0x1a },
{ IMX290_INCKSEL6, 0x1a }, { IMX290_INCKSEL6, 0x1a },
/* data rate settings */
{ IMX290_REPETITION, 0x10 },
{ IMX290_TCLKPOST, 79 },
{ IMX290_THSZERO, 47 },
{ IMX290_THSPREPARE, 23 },
{ IMX290_TCLKTRAIL, 23 },
{ IMX290_THSTRAIL, 23 },
{ IMX290_TCLKZERO, 87 },
{ IMX290_TCLKPREPARE, 23 },
{ IMX290_TLPX, 23 },
}; };
static const struct imx290_regval imx290_10bit_settings[] = { static const struct imx290_regval imx290_10bit_settings[] = {
...@@ -347,6 +339,58 @@ static const struct imx290_regval imx290_12bit_settings[] = { ...@@ -347,6 +339,58 @@ static const struct imx290_regval imx290_12bit_settings[] = {
{ IMX290_CSI_DT_FMT, IMX290_CSI_DT_FMT_RAW12 }, { IMX290_CSI_DT_FMT, IMX290_CSI_DT_FMT_RAW12 },
}; };
static const struct imx290_csi_cfg imx290_csi_222_75mhz = {
/* 222.75MHz or 445.5Mbit/s per lane */
.repetition = 0x10,
.tclkpost = 87,
.thszero = 55,
.thsprepare = 31,
.tclktrail = 31,
.thstrail = 31,
.tclkzero = 119,
.tclkprepare = 31,
.tlpx = 23,
};
static const struct imx290_csi_cfg imx290_csi_445_5mhz = {
/* 445.5MHz or 891Mbit/s per lane */
.repetition = 0x00,
.tclkpost = 119,
.thszero = 103,
.thsprepare = 71,
.tclktrail = 55,
.thstrail = 63,
.tclkzero = 255,
.tclkprepare = 63,
.tlpx = 55,
};
static const struct imx290_csi_cfg imx290_csi_148_5mhz = {
/* 148.5MHz or 297Mbit/s per lane */
.repetition = 0x10,
.tclkpost = 79,
.thszero = 47,
.thsprepare = 23,
.tclktrail = 23,
.thstrail = 23,
.tclkzero = 87,
.tclkprepare = 23,
.tlpx = 23,
};
static const struct imx290_csi_cfg imx290_csi_297mhz = {
/* 297MHz or 594Mbit/s per lane */
.repetition = 0x00,
.tclkpost = 103,
.thszero = 87,
.thsprepare = 47,
.tclktrail = 39,
.thstrail = 47,
.tclkzero = 191,
.tclkprepare = 47,
.tlpx = 39,
};
/* supported link frequencies */ /* supported link frequencies */
#define FREQ_INDEX_1080P 0 #define FREQ_INDEX_1080P 0
#define FREQ_INDEX_720P 1 #define FREQ_INDEX_720P 1
...@@ -562,6 +606,42 @@ static int imx290_set_black_level(struct imx290 *imx290, ...@@ -562,6 +606,42 @@ static int imx290_set_black_level(struct imx290 *imx290,
black_level >> (16 - bpp), err); black_level >> (16 - bpp), err);
} }
static int imx290_set_csi_config(struct imx290 *imx290)
{
const s64 *link_freqs = imx290_link_freqs_ptr(imx290);
const struct imx290_csi_cfg *csi_cfg;
int ret = 0;
switch (link_freqs[imx290->current_mode->link_freq_index]) {
case 445500000:
csi_cfg = &imx290_csi_445_5mhz;
break;
case 297000000:
csi_cfg = &imx290_csi_297mhz;
break;
case 222750000:
csi_cfg = &imx290_csi_222_75mhz;
break;
case 148500000:
csi_cfg = &imx290_csi_148_5mhz;
break;
default:
return -EINVAL;
}
imx290_write(imx290, IMX290_REPETITION, csi_cfg->repetition, &ret);
imx290_write(imx290, IMX290_TCLKPOST, csi_cfg->tclkpost, &ret);
imx290_write(imx290, IMX290_THSZERO, csi_cfg->thszero, &ret);
imx290_write(imx290, IMX290_THSPREPARE, csi_cfg->thsprepare, &ret);
imx290_write(imx290, IMX290_TCLKTRAIL, csi_cfg->tclktrail, &ret);
imx290_write(imx290, IMX290_THSTRAIL, csi_cfg->thstrail, &ret);
imx290_write(imx290, IMX290_TCLKZERO, csi_cfg->tclkzero, &ret);
imx290_write(imx290, IMX290_TCLKPREPARE, csi_cfg->tclkprepare, &ret);
imx290_write(imx290, IMX290_TLPX, csi_cfg->tlpx, &ret);
return ret;
}
static int imx290_setup_format(struct imx290 *imx290, static int imx290_setup_format(struct imx290 *imx290,
const struct v4l2_mbus_framefmt *format) const struct v4l2_mbus_framefmt *format)
{ {
...@@ -774,6 +854,12 @@ static int imx290_start_streaming(struct imx290 *imx290, ...@@ -774,6 +854,12 @@ static int imx290_start_streaming(struct imx290 *imx290,
return ret; return ret;
} }
ret = imx290_set_csi_config(imx290);
if (ret < 0) {
dev_err(imx290->dev, "Could not set csi cfg\n");
return ret;
}
/* Apply the register values related to current frame format */ /* Apply the register values related to current frame format */
format = v4l2_subdev_get_pad_format(&imx290->sd, state, 0); format = v4l2_subdev_get_pad_format(&imx290->sd, state, 0);
ret = imx290_setup_format(imx290, format); ret = imx290_setup_format(imx290, format);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment