arm64: dts: imx8qxp: add lpuart baud clock

Add imx8qxp lpuart baud clock.
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm64/boot/dts/freescale/imx8qxp.dtsi

@@ -209,8 +209,9 @@ adma_lpuart0: serial@5a060000 {
 			reg = <0x5a060000 0x1000>;
 			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-parent = <&gic>;
-			clocks = <&adma_lpcg IMX_ADMA_LPCG_UART0_BAUD_CLK>;
-			clock-names = "ipg";
+			clocks = <&adma_lpcg IMX_ADMA_LPCG_UART0_IPG_CLK>,
+				 <&adma_lpcg IMX_ADMA_LPCG_UART0_BAUD_CLK>;
+			clock-names = "ipg", "baud";
 			power-domains = <&pd IMX_SC_R_UART_0>;
 			status = "disabled";
 		};
@@ -220,8 +221,9 @@ adma_lpuart1: serial@5a070000 {
 			reg = <0x5a070000 0x1000>;
 			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-parent = <&gic>;
-			clocks = <&adma_lpcg IMX_ADMA_LPCG_UART1_BAUD_CLK>;
-			clock-names = "ipg";
+			clocks = <&adma_lpcg IMX_ADMA_LPCG_UART1_IPG_CLK>,
+				 <&adma_lpcg IMX_ADMA_LPCG_UART1_BAUD_CLK>;
+			clock-names = "ipg", "baud";
 			power-domains = <&pd IMX_SC_R_UART_1>;
 			status = "disabled";
 		};
@@ -231,8 +233,9 @@ adma_lpuart2: serial@5a080000 {
 			reg = <0x5a080000 0x1000>;
 			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-parent = <&gic>;
-			clocks = <&adma_lpcg IMX_ADMA_LPCG_UART2_BAUD_CLK>;
-			clock-names = "ipg";
+			clocks = <&adma_lpcg IMX_ADMA_LPCG_UART2_IPG_CLK>,
+				 <&adma_lpcg IMX_ADMA_LPCG_UART2_BAUD_CLK>;
+			clock-names = "ipg", "baud";
 			power-domains = <&pd IMX_SC_R_UART_2>;
 			status = "disabled";
 		};
@@ -242,8 +245,9 @@ adma_lpuart3: serial@5a090000 {
 			reg = <0x5a090000 0x1000>;
 			interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-parent = <&gic>;
-			clocks = <&adma_lpcg IMX_ADMA_LPCG_UART3_BAUD_CLK>;
-			clock-names = "ipg";
+			clocks = <&adma_lpcg IMX_ADMA_LPCG_UART3_IPG_CLK>,
+				 <&adma_lpcg IMX_ADMA_LPCG_UART3_BAUD_CLK>;
+			clock-names = "ipg", "baud";
 			power-domains = <&pd IMX_SC_R_UART_3>;
 			status = "disabled";
 		};