Skip to content

L
linux
Commit d05663a2 authored by Tony Lindgren's avatar Tony Lindgren
Browse files
Options

Merge branch 'for_3.10/dts' of... 

Merge branch 'for_3.10/dts' of git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into omap-for-v3.10/dt
parents 07961ac7 1fac4fff
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 2717 additions and 643 deletions
Documentation/devicetree/bindings/arm/omap/l3-noc.txt
View file @ d05663a2
......@@ -6,6 +6,7 @@ provided by Arteris.
Required properties:
- compatible : Should be "ti,omap3-l3-smx" for OMAP3 family
Should be "ti,omap4-l3-noc" for OMAP4 family
- reg: Contains L3 register address range for each noc domain.
- ti,hwmods: "l3_main_1", ... One hwmod for each noc domain.
Examples:
......
Documentation/devicetree/bindings/arm/omap/timer.txt
View file @ d05663a2
OMAP Timer bindings
Required properties:
- compatible: Must be "ti,omap2-timer" for OMAP2+ controllers.
- compatible: Should be set to one of the below. Please note that
OMAP44xx devices have timer instances that are 100%
register compatible with OMAP3xxx devices as well as
newer timers that are not 100% register compatible.
So for OMAP44xx devices timer instances may use
different compatible strings.
ti,omap2420-timer (applicable to OMAP24xx devices)
ti,omap3430-timer (applicable to OMAP3xxx/44xx devices)
ti,omap4430-timer (applicable to OMAP44xx devices)
ti,omap5430-timer (applicable to OMAP543x devices)
ti,am335x-timer (applicable to AM335x devices)
ti,am335x-timer-1ms (applicable to AM335x devices)
- reg: Contains timer register address range (base address and
length).
- interrupts: Contains the interrupt information for the timer. The
......@@ -22,7 +35,7 @@ Optional properties:
Example:
timer12: timer@48304000 {
compatible = "ti,omap2-timer";
compatible = "ti,omap3430-timer";
reg = <0x48304000 0x400>;
interrupts = <95>;
ti,hwmods = "timer12"
......
Documentation/devicetree/bindings/gpio/gpio-omap.txt
View file @ d05663a2
......@@ -5,12 +5,12 @@ Required properties:
- "ti,omap2-gpio" for OMAP2 controllers
- "ti,omap3-gpio" for OMAP3 controllers
- "ti,omap4-gpio" for OMAP4 controllers
- gpio-controller : Marks the device node as a GPIO controller.
- #gpio-cells : Should be two.
- first cell is the pin number
- second cell is used to specify optional parameters (unused)
- gpio-controller : Marks the device node as a GPIO controller.
- interrupt-controller: Mark the device node as an interrupt controller.
- #interrupt-cells : Should be 2.
- interrupt-controller: Mark the device node as an interrupt controller
The first cell is the GPIO number.
The second cell is used to specify flags:
bits[3:0] trigger type and level flags:
......@@ -29,8 +29,8 @@ Example:
gpio4: gpio4 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio4";
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
Documentation/devicetree/bindings/usb/omap-usb.txt
View file @ d05663a2
......@@ -18,6 +18,7 @@ OMAP MUSB GLUE
represents PERIPHERAL.
- power : Should be "50". This signifies the controller can supply upto
100mA when operating in host mode.
- usb-phy : the phandle for the PHY device
Optional properties:
- ctrl-module : phandle of the control module this glue uses to write to
......
arch/arm/boot/dts/Makefile
View file @ d05663a2
......@@ -115,10 +115,14 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
imx28-tx28.dtb
dtb-$(CONFIG_ARCH_NOMADIK) += ste-nomadik-s8815.dtb
dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
omap3430-sdp.dtb \
omap3-beagle.dtb \
omap3-devkit8000.dtb \
omap3-beagle-xm.dtb \
omap3-evm.dtb \
omap3-tobi.dtb \
omap3-igep0020.dtb \
omap3-igep0030.dtb \
omap4-panda.dtb \
omap4-panda-a4.dtb \
omap4-panda-es.dtb \
......
arch/arm/boot/dts/am335x-bone.dts
View file @ d05663a2
......@@ -43,7 +43,7 @@ uart1: serial@44e09000 {
status = "okay";
};
i2c1: i2c@44e0b000 {
i2c0: i2c@44e0b000 {
status = "okay";
clock-frequency = <400000>;
......@@ -59,27 +59,27 @@ leds {
led@2 {
label = "beaglebone:green:heartbeat";
gpios = <&gpio2 21 0>;
gpios = <&gpio1 21 0>;
linux,default-trigger = "heartbeat";
default-state = "off";
};
led@3 {
label = "beaglebone:green:mmc0";
gpios = <&gpio2 22 0>;
gpios = <&gpio1 22 0>;
linux,default-trigger = "mmc0";
default-state = "off";
};
led@4 {
label = "beaglebone:green:usr2";
gpios = <&gpio2 23 0>;
gpios = <&gpio1 23 0>;
default-state = "off";
};
led@5 {
label = "beaglebone:green:usr3";
gpios = <&gpio2 24 0>;
gpios = <&gpio1 24 0>;
default-state = "off";
};
};
......
arch/arm/boot/dts/am335x-evm.dts
View file @ d05663a2
......@@ -51,7 +51,7 @@ uart1: serial@44e09000 {
status = "okay";
};
i2c1: i2c@44e0b000 {
i2c0: i2c@44e0b000 {
status = "okay";
clock-frequency = <400000>;
......@@ -60,7 +60,7 @@ tps: tps@2d {
};
};
i2c2: i2c@4802a000 {
i2c1: i2c@4802a000 {
status = "okay";
clock-frequency = <100000>;
......@@ -123,12 +123,12 @@ matrix_keypad: matrix_keypad@0 {
debounce-delay-ms = <5>;
col-scan-delay-us = <2>;
row-gpios = <&gpio2 25 0 /* Bank1, pin25 */
&gpio2 26 0 /* Bank1, pin26 */
&gpio2 27 0>; /* Bank1, pin27 */
row-gpios = <&gpio1 25 0 /* Bank1, pin25 */
&gpio1 26 0 /* Bank1, pin26 */
&gpio1 27 0>; /* Bank1, pin27 */
col-gpios = <&gpio2 21 0 /* Bank1, pin21 */
&gpio2 22 0>; /* Bank1, pin22 */
col-gpios = <&gpio1 21 0 /* Bank1, pin21 */
&gpio1 22 0>; /* Bank1, pin22 */
linux,keymap = <0x0000008b /* MENU */
0x0100009e /* BACK */
......@@ -147,14 +147,14 @@ gpio_keys: volume_keys@0 {
switch@9 {
label = "volume-up";
linux,code = <115>;
gpios = <&gpio1 2 1>;
gpios = <&gpio0 2 1>;
gpio-key,wakeup;
};
switch@10 {
label = "volume-down";
linux,code = <114>;
gpios = <&gpio1 3 1>;
gpios = <&gpio0 3 1>;
gpio-key,wakeup;
};
};
......
arch/arm/boot/dts/am335x-evmsk.dts
View file @ d05663a2
......@@ -58,7 +58,7 @@ uart1: serial@44e09000 {
status = "okay";
};
i2c1: i2c@44e0b000 {
i2c0: i2c@44e0b000 {
status = "okay";
clock-frequency = <400000>;
......@@ -115,26 +115,26 @@ leds {
led@1 {
label = "evmsk:green:usr0";
gpios = <&gpio2 4 0>;
gpios = <&gpio1 4 0>;
default-state = "off";
};
led@2 {
label = "evmsk:green:usr1";
gpios = <&gpio2 5 0>;
gpios = <&gpio1 5 0>;
default-state = "off";
};
led@3 {
label = "evmsk:green:mmc0";
gpios = <&gpio2 6 0>;
gpios = <&gpio1 6 0>;
linux,default-trigger = "mmc0";
default-state = "off";
};
led@4 {
label = "evmsk:green:heartbeat";
gpios = <&gpio2 7 0>;
gpios = <&gpio1 7 0>;
linux,default-trigger = "heartbeat";
default-state = "off";
};
......@@ -148,26 +148,26 @@ gpio_buttons: gpio_buttons@0 {
switch@1 {
label = "button0";
linux,code = <0x100>;
gpios = <&gpio3 3 0>;
gpios = <&gpio2 3 0>;
};
switch@2 {
label = "button1";
linux,code = <0x101>;
gpios = <&gpio3 2 0>;
gpios = <&gpio2 2 0>;
};
switch@3 {
label = "button2";
linux,code = <0x102>;
gpios = <&gpio1 30 0>;
gpios = <&gpio0 30 0>;
gpio-key,wakeup;
};
switch@4 {
label = "button3";
linux,code = <0x103>;
gpios = <&gpio3 5 0>;
gpios = <&gpio2 5 0>;
};
};
};
......
arch/arm/boot/dts/am33xx.dtsi
View file @ d05663a2
......@@ -21,6 +21,8 @@ aliases {
serial3 = &uart4;
serial4 = &uart5;
serial5 = &uart6;
d_can0 = &dcan0;
d_can1 = &dcan1;
};
cpus {
......@@ -87,7 +89,7 @@ intc: interrupt-controller@48200000 {
reg = <0x48200000 0x1000>;
};
gpio1: gpio@44e07000 {
gpio0: gpio@44e07000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio1";
gpio-controller;
......@@ -98,7 +100,7 @@ gpio1: gpio@44e07000 {
interrupts = <96>;
};
gpio2: gpio@4804c000 {
gpio1: gpio@4804c000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio2";
gpio-controller;
......@@ -109,7 +111,7 @@ gpio2: gpio@4804c000 {
interrupts = <98>;
};
gpio3: gpio@481ac000 {
gpio2: gpio@481ac000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio3";
gpio-controller;
......@@ -120,7 +122,7 @@ gpio3: gpio@481ac000 {
interrupts = <32>;
};
gpio4: gpio@481ae000 {
gpio3: gpio@481ae000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio4";
gpio-controller;
......@@ -185,7 +187,7 @@ uart6: serial@481aa000 {
status = "disabled";
};
i2c1: i2c@44e0b000 {
i2c0: i2c@44e0b000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
......@@ -195,7 +197,7 @@ i2c1: i2c@44e0b000 {
status = "disabled";
};
i2c2: i2c@4802a000 {
i2c1: i2c@4802a000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
......@@ -205,7 +207,7 @@ i2c2: i2c@4802a000 {
status = "disabled";
};
i2c3: i2c@4819c000 {
i2c2: i2c@4819c000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
......@@ -225,7 +227,8 @@ wdt2: wdt@44e35000 {
dcan0: d_can@481cc000 {
compatible = "bosch,d_can";
ti,hwmods = "d_can0";
reg = <0x481cc000 0x2000>;
reg = <0x481cc000 0x2000
0x44e10644 0x4>;
interrupts = <52>;
status = "disabled";
};
......@@ -233,13 +236,14 @@ dcan0: d_can@481cc000 {
dcan1: d_can@481d0000 {
compatible = "bosch,d_can";
ti,hwmods = "d_can1";
reg = <0x481d0000 0x2000>;
reg = <0x481d0000 0x2000
0x44e10644 0x4>;
interrupts = <55>;
status = "disabled";
};
timer1: timer@44e31000 {
compatible = "ti,omap2-timer";
compatible = "ti,am335x-timer-1ms";
reg = <0x44e31000 0x400>;
interrupts = <67>;
ti,hwmods = "timer1";
......@@ -247,21 +251,21 @@ timer1: timer@44e31000 {
};
timer2: timer@48040000 {
compatible = "ti,omap2-timer";
compatible = "ti,am335x-timer";
reg = <0x48040000 0x400>;
interrupts = <68>;
ti,hwmods = "timer2";
};
timer3: timer@48042000 {
compatible = "ti,omap2-timer";
compatible = "ti,am335x-timer";
reg = <0x48042000 0x400>;
interrupts = <69>;
ti,hwmods = "timer3";
};
timer4: timer@48044000 {
compatible = "ti,omap2-timer";
compatible = "ti,am335x-timer";
reg = <0x48044000 0x400>;
interrupts = <92>;
ti,hwmods = "timer4";
......@@ -269,7 +273,7 @@ timer4: timer@48044000 {
};
timer5: timer@48046000 {
compatible = "ti,omap2-timer";
compatible = "ti,am335x-timer";
reg = <0x48046000 0x400>;
interrupts = <93>;
ti,hwmods = "timer5";
......@@ -277,7 +281,7 @@ timer5: timer@48046000 {
};
timer6: timer@48048000 {
compatible = "ti,omap2-timer";
compatible = "ti,am335x-timer";
reg = <0x48048000 0x400>;
interrupts = <94>;
ti,hwmods = "timer6";
......@@ -285,7 +289,7 @@ timer6: timer@48048000 {
};
timer7: timer@4804a000 {
compatible = "ti,omap2-timer";
compatible = "ti,am335x-timer";
reg = <0x4804a000 0x400>;
interrupts = <95>;
ti,hwmods = "timer7";
......@@ -305,7 +309,7 @@ spi0: spi@48030000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x48030000 0x400>;
interrupt = <65>;
interrupts = <65>;
ti,spi-num-cs = <2>;
ti,hwmods = "spi0";
status = "disabled";
......@@ -316,7 +320,7 @@ spi1: spi@481a0000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x481a0000 0x400>;
interrupt = <125>;
interrupts = <125>;
ti,spi-num-cs = <2>;
ti,hwmods = "spi1";
status = "disabled";
......
arch/arm/boot/dts/am3517-evm.dts
View file @ d05663a2
......@@ -7,7 +7,7 @@
*/
/dts-v1/;
/include/ "omap3.dtsi"
/include/ "omap34xx.dtsi"
/ {
model = "TI AM3517 EVM (AM3517/05)";
......
arch/arm/boot/dts/am3517_mt_ventoux.dts
View file @ d05663a2
......@@ -7,7 +7,7 @@
*/
/dts-v1/;
/include/ "omap3.dtsi"
/include/ "omap34xx.dtsi"
/ {
model = "TeeJet Mt.Ventoux";
......
arch/arm/boot/dts/omap2.dtsi
View file @ d05663a2
......@@ -26,6 +26,11 @@ cpu@0 {
};
};
pmu {
compatible = "arm,arm1136-pmu";
interrupts = <3>;
};
soc {
compatible = "ti,omap-infra";
mpu {
......@@ -49,6 +54,18 @@ intc: interrupt-controller@1 {
reg = <0x480FE000 0x1000>;
};
sdma: dma-controller@48056000 {
compatible = "ti,omap2430-sdma", "ti,omap2420-sdma";
reg = <0x48056000 0x1000>;
interrupts = <12>,
<13>,
<14>,
<15>;
#dma-cells = <1>;
#dma-channels = <32>;
#dma-requests = <64>;
};
uart1: serial@4806a000 {
compatible = "ti,omap2-uart";
ti,hwmods = "uart1";
......@@ -68,28 +85,28 @@ uart3: serial@4806e000 {
};
timer2: timer@4802a000 {
compatible = "ti,omap2-timer";
compatible = "ti,omap2420-timer";
reg = <0x4802a000 0x400>;
interrupts = <38>;
ti,hwmods = "timer2";
};
timer3: timer@48078000 {
compatible = "ti,omap2-timer";
compatible = "ti,omap2420-timer";
reg = <0x48078000 0x400>;
interrupts = <39>;
ti,hwmods = "timer3";
};
timer4: timer@4807a000 {
compatible = "ti,omap2-timer";
compatible = "ti,omap2420-timer";
reg = <0x4807a000 0x400>;
interrupts = <40>;
ti,hwmods = "timer4";
};
timer5: timer@4807c000 {
compatible = "ti,omap2-timer";
compatible = "ti,omap2420-timer";
reg = <0x4807c000 0x400>;
interrupts = <41>;
ti,hwmods = "timer5";
......@@ -97,7 +114,7 @@ timer5: timer@4807c000 {
};
timer6: timer@4807e000 {
compatible = "ti,omap2-timer";
compatible = "ti,omap2420-timer";
reg = <0x4807e000 0x400>;
interrupts = <42>;
ti,hwmods = "timer6";
......@@ -105,7 +122,7 @@ timer6: timer@4807e000 {
};
timer7: timer@48080000 {
compatible = "ti,omap2-timer";
compatible = "ti,omap2420-timer";
reg = <0x48080000 0x400>;
interrupts = <43>;
ti,hwmods = "timer7";
......@@ -113,7 +130,7 @@ timer7: timer@48080000 {
};
timer8: timer@48082000 {
compatible = "ti,omap2-timer";
compatible = "ti,omap2420-timer";
reg = <0x48082000 0x400>;
interrupts = <44>;
ti,hwmods = "timer8";
......@@ -121,7 +138,7 @@ timer8: timer@48082000 {
};
timer9: timer@48084000 {
compatible = "ti,omap2-timer";
compatible = "ti,omap2420-timer";
reg = <0x48084000 0x400>;
interrupts = <45>;
ti,hwmods = "timer9";
......@@ -129,7 +146,7 @@ timer9: timer@48084000 {
};
timer10: timer@48086000 {
compatible = "ti,omap2-timer";
compatible = "ti,omap2420-timer";
reg = <0x48086000 0x400>;
interrupts = <46>;
ti,hwmods = "timer10";
......@@ -137,7 +154,7 @@ timer10: timer@48086000 {
};
timer11: timer@48088000 {
compatible = "ti,omap2-timer";
compatible = "ti,omap2420-timer";
reg = <0x48088000 0x400>;
interrupts = <47>;
ti,hwmods = "timer11";
......@@ -145,7 +162,7 @@ timer11: timer@48088000 {
};
timer12: timer@4808a000 {
compatible = "ti,omap2-timer";
compatible = "ti,omap2420-timer";
reg = <0x4808a000 0x400>;
interrupts = <48>;
ti,hwmods = "timer12";
......
arch/arm/boot/dts/omap2420-h4.dts
View file @ d05663a2
......@@ -18,3 +18,49 @@ memory {
reg = <0x80000000 0x4000000>; /* 64 MB */
};
};
&gpmc {
ranges = <0 0 0x08000000 0x04000000>;
nor@0,0 {
compatible = "cfi-flash";
linux,mtd-name= "intel,ge28f256l18b85";
#address-cells = <1>;
#size-cells = <1>;
reg = <0 0 0x04000000>;
bank-width = <2>;
gpmc,mux-add-data = <2>;
gpmc,cs-on-ns = <10>;
gpmc,cs-rd-off-ns = <160>;
gpmc,cs-wr-off-ns = <160>;
gpmc,adv-on-ns = <20>;
gpmc,adv-rd-off-ns = <50>;
gpmc,adv-wr-off-ns = <50>;
gpmc,oe-on-ns = <60>;
gpmc,oe-off-ns = <120>;
gpmc,we-on-ns = <60>;
gpmc,we-off-ns = <120>;
gpmc,rd-cycle-ns = <170>;
gpmc,wr-cycle-ns = <170>;
gpmc,access-ns = <150>;
gpmc,page-burst-access-ns = <10>;
partition@0 {
label = "bootloader";
reg = <0 0x20000>;
};
partition@0x20000 {
label = "params";
reg = <0x20000 0x20000>;
};
partition@0x40000 {
label = "kernel";
reg = <0x40000 0x200000>;
};
partition@0x240000 {
label = "file-system";
reg = <0x240000 0x3dc0000>;
};
};
};
arch/arm/boot/dts/omap2420.dtsi
View file @ d05663a2
......@@ -29,6 +29,65 @@ omap2420_pmx: pinmux@48000030 {
pinctrl-single,function-mask = <0x3f>;
};
gpio1: gpio@48018000 {
compatible = "ti,omap2-gpio";
reg = <0x48018000 0x200>;
interrupts = <29>;
ti,hwmods = "gpio1";
ti,gpio-always-on;
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
};
gpio2: gpio@4801a000 {
compatible = "ti,omap2-gpio";
reg = <0x4801a000 0x200>;
interrupts = <30>;
ti,hwmods = "gpio2";
ti,gpio-always-on;
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
};
gpio3: gpio@4801c000 {
compatible = "ti,omap2-gpio";
reg = <0x4801c000 0x200>;
interrupts = <31>;
ti,hwmods = "gpio3";
ti,gpio-always-on;
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
};
gpio4: gpio@4801e000 {
compatible = "ti,omap2-gpio";
reg = <0x4801e000 0x200>;
interrupts = <32>;
ti,hwmods = "gpio4";
ti,gpio-always-on;
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
};
gpmc: gpmc@6800a000 {
compatible = "ti,omap2420-gpmc";
reg = <0x6800a000 0x1000>;
#address-cells = <2>;
#size-cells = <1>;
interrupts = <20>;
gpmc,num-cs = <8>;
gpmc,num-waitpins = <4>;
ti,hwmods = "gpmc";
};
mcbsp1: mcbsp@48074000 {
compatible = "ti,omap2420-mcbsp";
reg = <0x48074000 0xff>;
......@@ -37,6 +96,9 @@ mcbsp1: mcbsp@48074000 {
<60>; /* RX interrupt */
interrupt-names = "tx", "rx";
ti,hwmods = "mcbsp1";
dmas = <&sdma 31>,
<&sdma 32>;
dma-names = "tx", "rx";
};
mcbsp2: mcbsp@48076000 {
......@@ -47,10 +109,13 @@ mcbsp2: mcbsp@48076000 {
<63>; /* RX interrupt */
interrupt-names = "tx", "rx";
ti,hwmods = "mcbsp2";
dmas = <&sdma 33>,
<&sdma 34>;
dma-names = "tx", "rx";
};
timer1: timer@48028000 {
compatible = "ti,omap2-timer";
compatible = "ti,omap2420-timer";
reg = <0x48028000 0x400>;
interrupts = <37>;
ti,hwmods = "timer1";
......
arch/arm/boot/dts/omap2430.dtsi
View file @ d05663a2
......@@ -29,6 +29,76 @@ omap2430_pmx: pinmux@49002030 {
pinctrl-single,function-mask = <0x3f>;
};
gpio1: gpio@4900c000 {
compatible = "ti,omap2-gpio";
reg = <0x4900c000 0x200>;
interrupts = <29>;
ti,hwmods = "gpio1";
ti,gpio-always-on;
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
};
gpio2: gpio@4900e000 {
compatible = "ti,omap2-gpio";
reg = <0x4900e000 0x200>;
interrupts = <30>;
ti,hwmods = "gpio2";
ti,gpio-always-on;
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
};
gpio3: gpio@49010000 {
compatible = "ti,omap2-gpio";
reg = <0x49010000 0x200>;
interrupts = <31>;
ti,hwmods = "gpio3";
ti,gpio-always-on;
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
};
gpio4: gpio@49012000 {
compatible = "ti,omap2-gpio";
reg = <0x49012000 0x200>;
interrupts = <32>;
ti,hwmods = "gpio4";
ti,gpio-always-on;
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
};
gpio5: gpio@480b6000 {
compatible = "ti,omap2-gpio";
reg = <0x480b6000 0x200>;
interrupts = <33>;
ti,hwmods = "gpio5";
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
};
gpmc: gpmc@6e000000 {
compatible = "ti,omap2430-gpmc";
reg = <0x6e000000 0x1000>;
#address-cells = <2>;
#size-cells = <1>;
interrupts = <20>;
gpmc,num-cs = <8>;
gpmc,num-waitpins = <4>;
ti,hwmods = "gpmc";
};
mcbsp1: mcbsp@48074000 {
compatible = "ti,omap2430-mcbsp";
reg = <0x48074000 0xff>;
......@@ -40,6 +110,9 @@ mcbsp1: mcbsp@48074000 {
interrupt-names = "common", "tx", "rx", "rx_overflow";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp1";
dmas = <&sdma 31>,
<&sdma 32>;
dma-names = "tx", "rx";
};
mcbsp2: mcbsp@48076000 {
......@@ -52,6 +125,9 @@ mcbsp2: mcbsp@48076000 {
interrupt-names = "common", "tx", "rx";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp2";
dmas = <&sdma 33>,
<&sdma 34>;
dma-names = "tx", "rx";
};
mcbsp3: mcbsp@4808c000 {
......@@ -64,6 +140,9 @@ mcbsp3: mcbsp@4808c000 {
interrupt-names = "common", "tx", "rx";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp3";
dmas = <&sdma 17>,
<&sdma 18>;
dma-names = "tx", "rx";
};
mcbsp4: mcbsp@4808e000 {
......@@ -76,6 +155,9 @@ mcbsp4: mcbsp@4808e000 {
interrupt-names = "common", "tx", "rx";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp4";
dmas = <&sdma 19>,
<&sdma 20>;
dma-names = "tx", "rx";
};
mcbsp5: mcbsp@48096000 {
......@@ -88,10 +170,13 @@ mcbsp5: mcbsp@48096000 {
interrupt-names = "common", "tx", "rx";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp5";
dmas = <&sdma 21>,
<&sdma 22>;
dma-names = "tx", "rx";
};
timer1: timer@49018000 {
compatible = "ti,omap2-timer";
compatible = "ti,omap2420-timer";
reg = <0x49018000 0x400>;
interrupts = <37>;
ti,hwmods = "timer1";
......
arch/arm/boot/dts/omap3-beagle-xm.dts
View file @ d05663a2
......@@ -13,6 +13,12 @@ / {
model = "TI OMAP3 BeagleBoard xM";
compatible = "ti,omap3-beagle-xm, ti,omap3-beagle", "ti,omap3";
cpus {
cpu@0 {
cpu0-supply = <&vcc>;
};
};
memory {
device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512 MB */
......@@ -20,10 +26,6 @@ memory {
leds {
compatible = "gpio-leds";
pmu_stat {
label = "beagleboard::pmu_stat";
gpios = <&twl_gpio 19 0>; /* LEDB */
};
heartbeat {
label = "beagleboard::usr0";
......@@ -38,6 +40,16 @@ mmc {
};
};
pwmleds {
compatible = "pwm-leds";
pmu_stat {
label = "beagleboard::pmu_stat";
pwms = <&twl_pwmled 1 7812500>;
max-brightness = <127>;
};
};
sound {
compatible = "ti,omap-twl4030";
ti,model = "omap3beagle";
......@@ -107,3 +119,9 @@ &twl_gpio {
*/
ti,pulldowns = <0x03a1c4>;
};
&usb_otg_hs {
interface-type = <0>;
mode = <3>;
power = <50>;
};
arch/arm/boot/dts/omap3-beagle.dts
View file @ d05663a2
......@@ -7,12 +7,18 @@
*/
/dts-v1/;
/include/ "omap3.dtsi"
/include/ "omap34xx.dtsi"
/ {
model = "TI OMAP3 BeagleBoard";
compatible = "ti,omap3-beagle", "ti,omap3";
cpus {
cpu@0 {
cpu0-supply = <&vcc>;
};
};
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
......@@ -38,6 +44,57 @@ mmc {
};
};
/* HS USB Port 2 RESET */
hsusb2_reset: hsusb2_reset_reg {
compatible = "regulator-fixed";
regulator-name = "hsusb2_reset";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio5 19 0>; /* gpio_147 */
startup-delay-us = <70000>;
enable-active-high;
};
/* HS USB Port 2 Power */
hsusb2_power: hsusb2_power_reg {
compatible = "regulator-fixed";
regulator-name = "hsusb2_vbus";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&twl_gpio 18 0>; /* GPIO LEDA */
startup-delay-us = <70000>;
};
/* HS USB Host PHY on PORT 2 */
hsusb2_phy: hsusb2_phy {
compatible = "usb-nop-xceiv";
reset-supply = <&hsusb2_reset>;
vcc-supply = <&hsusb2_power>;
};
};
&omap3_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <
&hsusbb2_pins
>;
hsusbb2_pins: pinmux_hsusbb2_pins {
pinctrl-single,pins = <
0x5c0 0x3 /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_clk OUTPUT */
0x5c2 0x3 /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_stp OUTPUT */
0x5c4 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dir INPUT | PULLDOWN */
0x5c6 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_nxt INPUT | PULLDOWN */
0x5c8 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat0 INPUT | PULLDOWN */
0x5cA 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat1 INPUT | PULLDOWN */
0x1a4 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat2 INPUT | PULLDOWN */
0x1a6 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat3 INPUT | PULLDOWN */
0x1a8 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat4 INPUT | PULLDOWN */
0x1aa 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat5 INPUT | PULLDOWN */
0x1ac 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat6 INPUT | PULLDOWN */
0x1ae 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat7 INPUT | PULLDOWN */
>;
};
};
&i2c1 {
......@@ -65,3 +122,23 @@ &mmc2 {
&mmc3 {
status = "disabled";
};
&usbhshost {
port2-mode = "ehci-phy";
};
&usbhsehci {
phys = <0 &hsusb2_phy>;
};
&twl_gpio {
ti,use-leds;
/* pullups: BIT(1) */
ti,pullups = <0x000002>;
/*
* pulldowns:
* BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
* BIT(15), BIT(16), BIT(17)
*/
ti,pulldowns = <0x03a1c4>;
};
arch/arm/boot/dts/omap3-devkit8000.dts 0 → 100644
View file @ d05663a2
/*
* Author: Anil Kumar <anilk4.v@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
/include/ "omap34xx.dtsi"
/ {
model = "TimLL OMAP3 Devkit8000";
compatible = "timll,omap3-devkit8000", "ti,omap3";
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
leds {
compatible = "gpio-leds";
heartbeat {
label = "devkit8000::led1";
gpios = <&gpio6 26 0>; /* 186 -> LED1 */
default-state = "on";
linux,default-trigger = "heartbeat";
};
mmc {
label = "devkit8000::led2";
gpios = <&gpio6 3 0>; /* 163 -> LED2 */
default-state = "on";
linux,default-trigger = "none";
};
usr {
label = "devkit8000::led3";
gpios = <&gpio6 4 0>; /* 164 -> LED3 */
default-state = "on";
linux,default-trigger = "usr";
};
};
sound {
compatible = "ti,omap-twl4030";
ti,model = "devkit8000";
ti,mcbsp = <&mcbsp2>;
ti,codec = <&twl_audio>;
ti,audio-routing =
"Ext Spk", "PREDRIVEL",
"Ext Spk", "PREDRIVER",
"MAINMIC", "Main Mic",
"Main Mic", "Mic Bias 1";
};
};
&i2c1 {
clock-frequency = <2600000>;
twl: twl@48 {
reg = <0x48>;
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
twl_audio: audio {
compatible = "ti,twl4030-audio";
codec {
};
};
};
};
&i2c2 {
status = "disabled";
};
&i2c3 {
status = "disabled";
};
/include/ "twl4030.dtsi"
&mmc1 {
vmmc-supply = <&vmmc1>;
vmmc_aux-supply = <&vsim>;
bus-width = <8>;
};
&mmc2 {
status = "disabled";
};
&mmc3 {
status = "disabled";
};
&wdt2 {
status = "disabled";
};
&mcbsp1 {
status = "disabled";
};
&mcbsp3 {
status = "disabled";
};
&mcbsp4 {
status = "disabled";
};
&mcbsp5 {
status = "disabled";
};
&gpmc {
ranges = <0 0 0x30000000 0x04>; /* CS0: NAND */
nand@0,0 {
reg = <0 0 0>; /* CS0, offset 0 */
nand-bus-width = <16>;
gpmc,sync-clk = <0>;
gpmc,cs-on = <0>;
gpmc,cs-rd-off = <44>;
gpmc,cs-wr-off = <44>;
gpmc,adv-on = <6>;
gpmc,adv-rd-off = <34>;
gpmc,adv-wr-off = <44>;
gpmc,we-off = <40>;
gpmc,oe-off = <54>;
gpmc,access = <64>;
gpmc,rd-cycle = <82>;
gpmc,wr-cycle = <82>;
gpmc,wr-access = <40>;
gpmc,wr-data-mux-bus = <0>;
#address-cells = <1>;
#size-cells = <1>;
x-loader@0 {
label = "X-Loader";
reg = <0 0x80000>;
};
bootloaders@80000 {
label = "U-Boot";
reg = <0x80000 0x1e0000>;
};
bootloaders_env@260000 {
label = "U-Boot Env";
reg = <0x260000 0x20000>;
};
kernel@280000 {
label = "Kernel";
reg = <0x280000 0x400000>;
};
filesystem@680000 {
label = "File System";
reg = <0x680000 0xf980000>;
};
};
};
arch/arm/boot/dts/omap3-evm.dts
View file @ d05663a2
......@@ -7,12 +7,18 @@
*/
/dts-v1/;
/include/ "omap3.dtsi"
/include/ "omap34xx.dtsi"
/ {
model = "TI OMAP3 EVM (OMAP3530, AM/DM37x)";
compatible = "ti,omap3-evm", "ti,omap3";
cpus {
cpu@0 {
cpu0-supply = <&vcc>;
};
};
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
......@@ -59,3 +65,9 @@ tvp5146@5c {
&twl_gpio {
ti,use-leds;
};
&usb_otg_hs {
interface-type = <0>;
mode = <3>;
power = <50>;
};
arch/arm/boot/dts/omap3-igep.dtsi 0 → 100644
View file @ d05663a2
/*
* Device Tree Source for IGEP Technology devices
*
* Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
* Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
/include/ "omap34xx.dtsi"
/ {
memory {
device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512 MB */
};
sound {
compatible = "ti,omap-twl4030";
ti,model = "igep2";
ti,mcbsp = <&mcbsp2>;
ti,codec = <&twl_audio>;
};
};
&omap3_pmx_core {
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
0x152 0x100 /* uart1_rx.uart1_rx INPUT | MODE0 */
0x14c 0 /* uart1_tx.uart1_tx OUTPUT | MODE0 */
>;
};
uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
0x14a 0x100 /* uart2_rx.uart2_rx INPUT | MODE0 */
0x148 0 /* uart2_tx.uart2_tx OUTPUT | MODE0 */
>;
};
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
0x16e 0x100 /* uart3_rx.uart3_rx INPUT | MODE0 */
0x170 0 /* uart3_tx.uart3_tx OUTPUT | MODE0 */
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
0x114 0x0118 /* sdmmc1_clk.sdmmc1_clk INPUT PULLUP | MODE 0 */
0x116 0x0118 /* sdmmc1_cmd.sdmmc1_cmd INPUT PULLUP | MODE 0 */
0x118 0x0118 /* sdmmc1_dat0.sdmmc1_dat0 INPUT PULLUP | MODE 0 */
0x11a 0x0118 /* sdmmc1_dat1.sdmmc1_dat1 INPUT PULLUP | MODE 0 */
0x11c 0x0118 /* sdmmc1_dat2.sdmmc1_dat2 INPUT PULLUP | MODE 0 */
0x11e 0x0118 /* sdmmc1_dat3.sdmmc1_dat3 INPUT PULLUP | MODE 0 */
0x120 0x0100 /* sdmmc1_dat4.sdmmc1_dat4 INPUT | MODE 0 */
0x122 0x0100 /* sdmmc1_dat5.sdmmc1_dat5 INPUT | MODE 0 */
0x124 0x0100 /* sdmmc1_dat6.sdmmc1_dat6 INPUT | MODE 0 */
0x126 0x0100 /* sdmmc1_dat7.sdmmc1_dat7 INPUT | MODE 0 */
>;
};
};
&i2c1 {
clock-frequency = <2600000>;
twl: twl@48 {
reg = <0x48>;
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
interrupt-parent = <&intc>;
twl_audio: audio {
compatible = "ti,twl4030-audio";
codec {
};
};
};
};
/include/ "twl4030.dtsi"
&i2c2 {
clock-frequency = <400000>;
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&vmmc1>;
vmmc_aux-supply = <&vsim>;
bus-width = <8>;
};
&mmc2 {
status = "disabled";
};
&mmc3 {
status = "disabled";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
};
&twl_gpio {
ti,use-leds;
};
arch/arm/boot/dts/omap3-igep0020.dts 0 → 100644
View file @ d05663a2
/*
* Device Tree Source for IGEPv2 board
*
* Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
* Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/include/ "omap3-igep.dtsi"
/ {
model = "IGEPv2";
compatible = "isee,omap3-igep0020", "ti,omap3";
leds {
compatible = "gpio-leds";
boot {
label = "omap3:green:boot";
gpios = <&gpio1 26 0>;
default-state = "on";
};
user0 {
label = "omap3:red:user0";
gpios = <&gpio1 27 0>;
default-state = "off";
};
user1 {
label = "omap3:red:user1";
gpios = <&gpio1 28 0>;
default-state = "off";
};
user2 {
label = "omap3:green:user1";
gpios = <&twl_gpio 19 1>;
};
};
};
&i2c3 {
clock-frequency = <100000>;
/*
* Display monitor features are burnt in the EEPROM
* as EDID data.
*/
eeprom@50 {
compatible = "ti,eeprom";
reg = <0x50>;
};
};
arch/arm/boot/dts/omap3-igep0030.dts 0 → 100644
View file @ d05663a2
/*
* Device Tree Source for IGEP COM Module
*
* Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
* Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/include/ "omap3-igep.dtsi"
/ {
model = "IGEP COM Module";
compatible = "isee,omap3-igep0030", "ti,omap3";
leds {
compatible = "gpio-leds";
boot {
label = "omap3:green:boot";
gpios = <&twl_gpio 13 1>;
default-state = "on";
};
user0 {
label = "omap3:red:user0";
gpios = <&twl_gpio 18 1>; /* LEDA */
default-state = "off";
};
user1 {
label = "omap3:green:user1";
gpios = <&twl_gpio 19 1>; /* LEDB */
default-state = "off";
};
user2 {
label = "omap3:red:user1";
gpios = <&gpio1 16 1>;
default-state = "off";
};
};
};
arch/arm/boot/dts/omap3-overo.dtsi
View file @ d05663a2
......@@ -11,17 +11,26 @@
*/
/dts-v1/;
/include/ "omap3.dtsi"
/include/ "omap34xx.dtsi"
/ {
leds {
compatible = "gpio-leds";
pwmleds {
compatible = "pwm-leds";
overo {
label = "overo:blue:COM";
gpios = <&twl_gpio 19 0>;
linux,default-trigger = "mmc0";
pwms = <&twl_pwmled 1 7812500>;
max-brightness = <127>;
};
};
sound {
compatible = "ti,omap-twl4030";
ti,model = "overo";
ti,mcbsp = <&mcbsp2>;
ti,codec = <&twl_audio>;
};
};
&i2c1 {
......@@ -31,6 +40,12 @@ twl: twl@48 {
reg = <0x48>;
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
interrupt-parent = <&intc>;
twl_audio: audio {
compatible = "ti,twl4030-audio";
codec {
};
};
};
};
......@@ -55,3 +70,9 @@ &mmc2 {
&twl_gpio {
ti,use-leds;
};
&usb_otg_hs {
interface-type = <0>;
mode = <3>;
power = <50>;
};
arch/arm/boot/dts/omap3.dtsi
View file @ d05663a2
......@@ -26,6 +26,12 @@ cpu@0 {
};
};
pmu {
compatible = "arm,cortex-a8-pmu";
interrupts = <3>;
ti,hwmods = "debugss";
};
/*
* The soc node represents the soc top level view. It is uses for IPs
* that are not memory mapped in the MPU view or for the MPU itself.
......@@ -75,6 +81,18 @@ intc: interrupt-controller@48200000 {
reg = <0x48200000 0x1000>;
};
sdma: dma-controller@48056000 {
compatible = "ti,omap3630-sdma", "ti,omap3430-sdma";
reg = <0x48056000 0x1000>;
interrupts = <12>,
<13>,
<14>,
<15>;
#dma-cells = <1>;
#dma-channels = <32>;
#dma-requests = <96>;
};
omap3_pmx_core: pinmux@48002030 {
compatible = "ti,omap3-padconf", "pinctrl-single";
reg = <0x48002030 0x05cc>;
......@@ -95,56 +113,69 @@ omap3_pmx_wkup: pinmux@0x48002a58 {
gpio1: gpio@48310000 {
compatible = "ti,omap3-gpio";
reg = <0x48310000 0x200>;
interrupts = <29>;
ti,hwmods = "gpio1";
ti,gpio-always-on;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio2: gpio@49050000 {
compatible = "ti,omap3-gpio";
reg = <0x49050000 0x200>;
interrupts = <30>;
ti,hwmods = "gpio2";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio3: gpio@49052000 {
compatible = "ti,omap3-gpio";
reg = <0x49052000 0x200>;
interrupts = <31>;
ti,hwmods = "gpio3";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio4: gpio@49054000 {
compatible = "ti,omap3-gpio";
reg = <0x49054000 0x200>;
interrupts = <32>;
ti,hwmods = "gpio4";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio5: gpio@49056000 {
compatible = "ti,omap3-gpio";
reg = <0x49056000 0x200>;
interrupts = <33>;
ti,hwmods = "gpio5";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio6: gpio@49058000 {
compatible = "ti,omap3-gpio";
reg = <0x49058000 0x200>;
interrupts = <34>;
ti,hwmods = "gpio6";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
uart1: serial@4806a000 {
......@@ -192,6 +223,16 @@ mcspi1: spi@48098000 {
#size-cells = <0>;
ti,hwmods = "mcspi1";
ti,spi-num-cs = <4>;
dmas = <&sdma 35>,
<&sdma 36>,
<&sdma 37>,
<&sdma 38>,
<&sdma 39>,
<&sdma 40>,
<&sdma 41>,
<&sdma 42>;
dma-names = "tx0", "rx0", "tx1", "rx1",
"tx2", "rx2", "tx3", "rx3";
};
mcspi2: spi@4809a000 {
......@@ -200,6 +241,11 @@ mcspi2: spi@4809a000 {
#size-cells = <0>;
ti,hwmods = "mcspi2";
ti,spi-num-cs = <2>;
dmas = <&sdma 43>,
<&sdma 44>,
<&sdma 45>,
<&sdma 46>;
dma-names = "tx0", "rx0", "tx1", "rx1";
};
mcspi3: spi@480b8000 {
......@@ -208,6 +254,11 @@ mcspi3: spi@480b8000 {
#size-cells = <0>;
ti,hwmods = "mcspi3";
ti,spi-num-cs = <2>;
dmas = <&sdma 15>,
<&sdma 16>,
<&sdma 23>,
<&sdma 24>;
dma-names = "tx0", "rx0", "tx1", "rx1";
};
mcspi4: spi@480ba000 {
......@@ -216,22 +267,30 @@ mcspi4: spi@480ba000 {
#size-cells = <0>;
ti,hwmods = "mcspi4";
ti,spi-num-cs = <1>;
dmas = <&sdma 70>, <&sdma 71>;
dma-names = "tx0", "rx0";
};
mmc1: mmc@4809c000 {
compatible = "ti,omap3-hsmmc";
ti,hwmods = "mmc1";
ti,dual-volt;
dmas = <&sdma 61>, <&sdma 62>;
dma-names = "tx", "rx";
};
mmc2: mmc@480b4000 {
compatible = "ti,omap3-hsmmc";
ti,hwmods = "mmc2";
dmas = <&sdma 47>, <&sdma 48>;
dma-names = "tx", "rx";
};
mmc3: mmc@480ad000 {
compatible = "ti,omap3-hsmmc";
ti,hwmods = "mmc3";
dmas = <&sdma 77>, <&sdma 78>;
dma-names = "tx", "rx";
};
wdt2: wdt@48314000 {
......@@ -249,6 +308,9 @@ mcbsp1: mcbsp@48074000 {
interrupt-names = "common", "tx", "rx";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp1";
dmas = <&sdma 31>,
<&sdma 32>;
dma-names = "tx", "rx";
};
mcbsp2: mcbsp@49022000 {
......@@ -263,6 +325,9 @@ mcbsp2: mcbsp@49022000 {
interrupt-names = "common", "tx", "rx", "sidetone";
ti,buffer-size = <1280>;
ti,hwmods = "mcbsp2", "mcbsp2_sidetone";
dmas = <&sdma 33>,
<&sdma 34>;
dma-names = "tx", "rx";
};
mcbsp3: mcbsp@49024000 {
......@@ -277,6 +342,9 @@ mcbsp3: mcbsp@49024000 {
interrupt-names = "common", "tx", "rx", "sidetone";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp3", "mcbsp3_sidetone";
dmas = <&sdma 17>,
<&sdma 18>;
dma-names = "tx", "rx";
};
mcbsp4: mcbsp@49026000 {
......@@ -289,6 +357,9 @@ mcbsp4: mcbsp@49026000 {
interrupt-names = "common", "tx", "rx";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp4";
dmas = <&sdma 19>,
<&sdma 20>;
dma-names = "tx", "rx";
};
mcbsp5: mcbsp@48096000 {
......@@ -301,10 +372,13 @@ mcbsp5: mcbsp@48096000 {
interrupt-names = "common", "tx", "rx";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp5";
dmas = <&sdma 21>,
<&sdma 22>;
dma-names = "tx", "rx";
};
timer1: timer@48318000 {
compatible = "ti,omap2-timer";
compatible = "ti,omap3430-timer";
reg = <0x48318000 0x400>;
interrupts = <37>;
ti,hwmods = "timer1";
......@@ -312,28 +386,28 @@ timer1: timer@48318000 {
};
timer2: timer@49032000 {
compatible = "ti,omap2-timer";
compatible = "ti,omap3430-timer";
reg = <0x49032000 0x400>;
interrupts = <38>;
ti,hwmods = "timer2";
};
timer3: timer@49034000 {
compatible = "ti,omap2-timer";
compatible = "ti,omap3430-timer";
reg = <0x49034000 0x400>;
interrupts = <39>;
ti,hwmods = "timer3";
};
timer4: timer@49036000 {
compatible = "ti,omap2-timer";
compatible = "ti,omap3430-timer";
reg = <0x49036000 0x400>;
interrupts = <40>;
ti,hwmods = "timer4";
};
timer5: timer@49038000 {
compatible = "ti,omap2-timer";
compatible = "ti,omap3430-timer";
reg = <0x49038000 0x400>;
interrupts = <41>;
ti,hwmods = "timer5";
......@@ -341,7 +415,7 @@ timer5: timer@49038000 {
};
timer6: timer@4903a000 {
compatible = "ti,omap2-timer";
compatible = "ti,omap3430-timer";
reg = <0x4903a000 0x400>;
interrupts = <42>;
ti,hwmods = "timer6";
......@@ -349,7 +423,7 @@ timer6: timer@4903a000 {
};
timer7: timer@4903c000 {
compatible = "ti,omap2-timer";
compatible = "ti,omap3430-timer";
reg = <0x4903c000 0x400>;
interrupts = <43>;
ti,hwmods = "timer7";
......@@ -357,7 +431,7 @@ timer7: timer@4903c000 {
};
timer8: timer@4903e000 {
compatible = "ti,omap2-timer";
compatible = "ti,omap3430-timer";
reg = <0x4903e000 0x400>;
interrupts = <44>;
ti,hwmods = "timer8";
......@@ -366,7 +440,7 @@ timer8: timer@4903e000 {
};
timer9: timer@49040000 {
compatible = "ti,omap2-timer";
compatible = "ti,omap3430-timer";
reg = <0x49040000 0x400>;
interrupts = <45>;
ti,hwmods = "timer9";
......@@ -374,7 +448,7 @@ timer9: timer@49040000 {
};
timer10: timer@48086000 {
compatible = "ti,omap2-timer";
compatible = "ti,omap3430-timer";
reg = <0x48086000 0x400>;
interrupts = <46>;
ti,hwmods = "timer10";
......@@ -382,7 +456,7 @@ timer10: timer@48086000 {
};
timer11: timer@48088000 {
compatible = "ti,omap2-timer";
compatible = "ti,omap3430-timer";
reg = <0x48088000 0x400>;
interrupts = <47>;
ti,hwmods = "timer11";
......@@ -390,12 +464,65 @@ timer11: timer@48088000 {
};
timer12: timer@48304000 {
compatible = "ti,omap2-timer";
compatible = "ti,omap3430-timer";
reg = <0x48304000 0x400>;
interrupts = <95>;
ti,hwmods = "timer12";
ti,timer-alwon;
ti,timer-secure;
};
usbhstll: usbhstll@48062000 {
compatible = "ti,usbhs-tll";
reg = <0x48062000 0x1000>;
interrupts = <78>;
ti,hwmods = "usb_tll_hs";
};
usbhshost: usbhshost@48064000 {
compatible = "ti,usbhs-host";
reg = <0x48064000 0x400>;
ti,hwmods = "usb_host_hs";
#address-cells = <1>;
#size-cells = <1>;
ranges;
usbhsohci: ohci@48064400 {
compatible = "ti,ohci-omap3", "usb-ohci";
reg = <0x48064400 0x400>;
interrupt-parent = <&intc>;
interrupts = <76>;
};
usbhsehci: ehci@48064800 {
compatible = "ti,ehci-omap", "usb-ehci";
reg = <0x48064800 0x400>;
interrupt-parent = <&intc>;
interrupts = <77>;
};
};
gpmc: gpmc@6e000000 {
compatible = "ti,omap3430-gpmc";
ti,hwmods = "gpmc";
reg = <0x6e000000 0x02d0>;
interrupts = <20>;
gpmc,num-cs = <8>;
gpmc,num-waitpins = <4>;
#address-cells = <2>;
#size-cells = <1>;
};
usb_otg_hs: usb_otg_hs@480ab000 {
compatible = "ti,omap3-musb";
reg = <0x480ab000 0x1000>;
interrupts = <0 92 0x4>, <0 93 0x4>;
interrupt-names = "mc", "dma";
ti,hwmods = "usb_otg_hs";
usb-phy = <&usb2_phy>;
multipoint = <1>;
num-eps = <16>;
ram-bits = <12>;
};
};
};
arch/arm/boot/dts/omap3430-sdp.dts 0 → 100644
View file @ d05663a2
/*
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
/include/ "omap34xx.dtsi"
/ {
model = "TI OMAP3430 SDP";
compatible = "ti,omap3430-sdp", "ti,omap3";
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
};
&i2c1 {
clock-frequency = <2600000>;
twl: twl@48 {
reg = <0x48>;
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
};
};
/include/ "twl4030.dtsi"
&mmc1 {
vmmc-supply = <&vmmc1>;
vmmc_aux-supply = <&vsim>;
bus-width = <8>;
};
&mmc2 {
status = "disabled";
};
&mmc3 {
status = "disabled";
};
&gpmc {
ranges = <0 0 0x10000000 0x08000000>,
<1 0 0x28000000 0x08000000>,
<2 0 0x20000000 0x10000000>;
nor@0,0 {
compatible = "cfi-flash";
linux,mtd-name= "intel,pf48f6000m0y1be";
#address-cells = <1>;
#size-cells = <1>;
reg = <0 0 0x08000000>;
bank-width = <2>;
gpmc,mux-add-data = <2>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <186>;
gpmc,cs-wr-off-ns = <186>;
gpmc,adv-on-ns = <12>;
gpmc,adv-rd-off-ns = <48>;
gpmc,adv-wr-off-ns = <48>;
gpmc,oe-on-ns = <54>;
gpmc,oe-off-ns = <168>;
gpmc,we-on-ns = <54>;
gpmc,we-off-ns = <168>;
gpmc,rd-cycle-ns = <186>;
gpmc,wr-cycle-ns = <186>;
gpmc,access-ns = <114>;
gpmc,page-burst-access-ns = <6>;
gpmc,bus-turnaround-ns = <12>;
gpmc,cycle2cycle-delay-ns = <18>;
gpmc,wr-data-mux-bus-ns = <90>;
gpmc,wr-access-ns = <186>;
gpmc,cycle2cycle-samecsen;
gpmc,cycle2cycle-diffcsen;
partition@0 {
label = "bootloader-nor";
reg = <0 0x40000>;
};
partition@0x40000 {
label = "params-nor";
reg = <0x40000 0x40000>;
};
partition@0x80000 {
label = "kernel-nor";
reg = <0x80000 0x200000>;
};
partition@0x280000 {
label = "filesystem-nor";
reg = <0x240000 0x7d80000>;
};
};
nand@1,0 {
linux,mtd-name= "micron,mt29f1g08abb";
#address-cells = <1>;
#size-cells = <1>;
reg = <1 0 0x08000000>;
nand-bus-width = <8>;
ti,nand-ecc-opt = "sw";
gpmc,device-nand;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <36>;
gpmc,cs-wr-off-ns = <36>;
gpmc,adv-on-ns = <6>;
gpmc,adv-rd-off-ns = <24>;
gpmc,adv-wr-off-ns = <36>;
gpmc,oe-on-ns = <6>;
gpmc,oe-off-ns = <48>;
gpmc,we-on-ns = <6>;
gpmc,we-off-ns = <30>;
gpmc,rd-cycle-ns = <72>;
gpmc,wr-cycle-ns = <72>;
gpmc,access-ns = <54>;
gpmc,wr-access-ns = <30>;
partition@0 {
label = "xloader-nand";
reg = <0 0x80000>;
};
partition@0x80000 {
label = "bootloader-nand";
reg = <0x80000 0x140000>;
};
partition@0x1c0000 {
label = "params-nand";
reg = <0x1c0000 0xc0000>;
};
partition@0x280000 {
label = "kernel-nand";
reg = <0x280000 0x500000>;
};
partition@0x780000 {
label = "filesystem-nand";
reg = <0x780000 0x7880000>;
};
};
onenand@2,0 {
linux,mtd-name= "samsung,kfm2g16q2m-deb8";
#address-cells = <1>;
#size-cells = <1>;
reg = <2 0 0x10000000>;
gpmc,device-width = <2>;
gpmc,mux-add-data = <2>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <84>;
gpmc,cs-wr-off-ns = <72>;
gpmc,adv-on-ns = <0>;
gpmc,adv-rd-off-ns = <18>;
gpmc,adv-wr-off-ns = <18>;
gpmc,oe-on-ns = <30>;
gpmc,oe-off-ns = <84>;
gpmc,we-on-ns = <0>;
gpmc,we-off-ns = <42>;
gpmc,rd-cycle-ns = <108>;
gpmc,wr-cycle-ns = <96>;
gpmc,access-ns = <78>;
gpmc,wr-data-mux-bus-ns = <30>;
partition@0 {
label = "xloader-onenand";
reg = <0 0x80000>;
};
partition@0x80000 {
label = "bootloader-onenand";
reg = <0x80000 0x40000>;
};
partition@0xc0000 {
label = "params-onenand";
reg = <0xc0000 0x20000>;
};
partition@0xe0000 {
label = "kernel-onenand";
reg = <0xe0000 0x200000>;
};
partition@0x2e0000 {
label = "filesystem-onenand";
reg = <0x2e0000 0xfd20000>;
};
};
};
arch/arm/boot/dts/omap34xx.dtsi 0 → 100644
View file @ d05663a2
/*
* Device Tree Source for OMAP34xx/OMAP35xx SoC
*
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/include/ "omap3.dtsi"
/ {
cpus {
cpu@0 {
/* OMAP343x/OMAP35xx variants OPP1-5 */
operating-points = <
/* kHz uV */
125000 975000
250000 1075000
500000 1200000
550000 1270000
600000 1350000
>;
clock-latency = <300000>; /* From legacy driver */
};
};
};
arch/arm/boot/dts/omap36xx.dtsi
View file @ d05663a2
......@@ -15,6 +15,19 @@ aliases {
serial3 = &uart4;
};
cpus {
/* OMAP3630/OMAP37xx 'standard device' variants OPP50 to OPP130 */
cpu@0 {
operating-points = <
/* kHz uV */
300000 975000
600000 1075000
800000 1200000
>;
clock-latency = <300000>; /* From legacy driver */
};
};
ocp {
uart4: serial@49042000 {
compatible = "ti,omap3-uart";
......
arch/arm/boot/dts/omap4-panda-a4.dts
View file @ d05663a2
......@@ -5,7 +5,10 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/include/ "omap4-panda.dts"
/dts-v1/;
/include/ "omap443x.dtsi"
/include/ "omap4-panda-common.dtsi"
/* Pandaboard Rev A4+ have external pullups on SCL & SDA */
&dss_hdmi_pins {
......
arch/arm/boot/dts/omap4-panda-common.dtsi 0 → 100644
View file @ d05663a2
/*
* Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/include/ "elpida_ecb240abacn.dtsi"
/ {
model = "TI OMAP4 PandaBoard";
compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4";
memory {
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
};
leds {
compatible = "gpio-leds";
heartbeat {
label = "pandaboard::status1";
gpios = <&gpio1 7 0>;
linux,default-trigger = "heartbeat";
};
mmc {
label = "pandaboard::status2";
gpios = <&gpio1 8 0>;
linux,default-trigger = "mmc0";
};
};
sound: sound {
compatible = "ti,abe-twl6040";
ti,model = "PandaBoard";
ti,mclk-freq = <38400000>;
ti,mcpdm = <&mcpdm>;
ti,twl6040 = <&twl6040>;
/* Audio routing */
ti,audio-routing =
"Headset Stereophone", "HSOL",
"Headset Stereophone", "HSOR",
"Ext Spk", "HFL",
"Ext Spk", "HFR",
"Line Out", "AUXL",
"Line Out", "AUXR",
"HSMIC", "Headset Mic",
"Headset Mic", "Headset Mic Bias",
"AFML", "Line In",
"AFMR", "Line In";
};
};
&omap4_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <
&twl6040_pins
&mcpdm_pins
&mcbsp1_pins
&dss_hdmi_pins
&tpd12s015_pins
>;
twl6040_pins: pinmux_twl6040_pins {
pinctrl-single,pins = <
0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */
0x160 0x100 /* sys_nirq2.sys_nirq2 INPUT | MODE0 */
>;
};
mcpdm_pins: pinmux_mcpdm_pins {
pinctrl-single,pins = <
0xc6 0x108 /* abe_pdm_ul_data.abe_pdm_ul_data INPUT PULLDOWN | MODE0 */
0xc8 0x108 /* abe_pdm_dl_data.abe_pdm_dl_data INPUT PULLDOWN | MODE0 */
0xca 0x118 /* abe_pdm_frame.abe_pdm_frame INPUT PULLUP | MODE0 */
0xcc 0x108 /* abe_pdm_lb_clk.abe_pdm_lb_clk INPUT PULLDOWN | MODE0 */
0xce 0x108 /* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */
>;
};
mcbsp1_pins: pinmux_mcbsp1_pins {
pinctrl-single,pins = <
0xbe 0x100 /* abe_mcbsp1_clkx.abe_mcbsp1_clkx INPUT | MODE0 */
0xc0 0x108 /* abe_mcbsp1_dr.abe_mcbsp1_dr INPUT PULLDOWN | MODE0 */
0xc2 0x8 /* abe_mcbsp1_dx.abe_mcbsp1_dx OUTPUT PULLDOWN | MODE0 */
0xc4 0x100 /* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */
>;
};
dss_hdmi_pins: pinmux_dss_hdmi_pins {
pinctrl-single,pins = <
0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
0x5c 0x118 /* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */
0x5e 0x118 /* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */
>;
};
tpd12s015_pins: pinmux_tpd12s015_pins {
pinctrl-single,pins = <
0x22 0x3 /* gpmc_a17.gpio_41 OUTPUT | MODE3 */
0x48 0x3 /* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */
0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
0xe2 0x118 /* i2c1_scl PULLUP | INPUTENABLE | MODE0 */
0xe4 0x118 /* i2c1_sda PULLUP | INPUTENABLE | MODE0 */
>;
};
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
0xe6 0x118 /* i2c2_scl PULLUP | INPUTENABLE | MODE0 */
0xe8 0x118 /* i2c2_sda PULLUP | INPUTENABLE | MODE0 */
>;
};
i2c3_pins: pinmux_i2c3_pins {
pinctrl-single,pins = <
0xea 0x118 /* i2c3_scl PULLUP | INPUTENABLE | MODE0 */
0xec 0x118 /* i2c3_sda PULLUP | INPUTENABLE | MODE0 */
>;
};
i2c4_pins: pinmux_i2c4_pins {
pinctrl-single,pins = <
0xee 0x118 /* i2c4_scl PULLUP | INPUTENABLE | MODE0 */
0xf0 0x118 /* i2c4_sda PULLUP | INPUTENABLE | MODE0 */
>;
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
clock-frequency = <400000>;
twl: twl@48 {
reg = <0x48>;
/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */
interrupt-parent = <&gic>;
};
twl6040: twl@4b {
compatible = "ti,twl6040";
reg = <0x4b>;
/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */
interrupt-parent = <&gic>;
ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */
vio-supply = <&v1v8>;
v2v1-supply = <&v2v1>;
enable-active-high;
};
};
/include/ "twl6030.dtsi"
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
clock-frequency = <400000>;
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&i2c3_pins>;
clock-frequency = <100000>;
/*
* Display monitor features are burnt in their EEPROM as EDID data.
* The EEPROM is connected as I2C slave device.
*/
eeprom@50 {
compatible = "ti,eeprom";
reg = <0x50>;
};
};
&i2c4 {
pinctrl-names = "default";
pinctrl-0 = <&i2c4_pins>;
clock-frequency = <400000>;
};
&mmc1 {
vmmc-supply = <&vmmc>;
bus-width = <8>;
};
&mmc2 {
status = "disabled";
};
&mmc3 {
status = "disabled";
};
&mmc4 {
status = "disabled";
};
&mmc5 {
ti,non-removable;
bus-width = <4>;
};
&emif1 {
cs1-used;
device-handle = <&elpida_ECB240ABACN>;
};
&emif2 {
cs1-used;
device-handle = <&elpida_ECB240ABACN>;
};
&mcbsp2 {
status = "disabled";
};
&mcbsp3 {
status = "disabled";
};
&dmic {
status = "disabled";
};
&twl_usb_comparator {
usb-supply = <&vusb>;
};
&usb_otg_hs {
interface-type = <1>;
mode = <3>;
power = <50>;
};
arch/arm/boot/dts/omap4-panda-es.dts
View file @ d05663a2
......@@ -5,7 +5,10 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/include/ "omap4-panda.dts"
/dts-v1/;
/include/ "omap4460.dtsi"
/include/ "omap4-panda-common.dtsi"
/* Audio routing is differnet between PandaBoard4430 and PandaBoardES */
&sound {
......
arch/arm/boot/dts/omap4-panda.dts
View file @ d05663a2
......@@ -7,202 +7,5 @@
*/
/dts-v1/;
/include/ "omap4.dtsi"
/include/ "elpida_ecb240abacn.dtsi"
/ {
model = "TI OMAP4 PandaBoard";
compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4";
memory {
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
};
leds {
compatible = "gpio-leds";
heartbeat {
label = "pandaboard::status1";
gpios = <&gpio1 7 0>;
linux,default-trigger = "heartbeat";
};
mmc {
label = "pandaboard::status2";
gpios = <&gpio1 8 0>;
linux,default-trigger = "mmc0";
};
};
sound: sound {
compatible = "ti,abe-twl6040";
ti,model = "PandaBoard";
ti,mclk-freq = <38400000>;
ti,mcpdm = <&mcpdm>;
ti,twl6040 = <&twl6040>;
/* Audio routing */
ti,audio-routing =
"Headset Stereophone", "HSOL",
"Headset Stereophone", "HSOR",
"Ext Spk", "HFL",
"Ext Spk", "HFR",
"Line Out", "AUXL",
"Line Out", "AUXR",
"HSMIC", "Headset Mic",
"Headset Mic", "Headset Mic Bias",
"AFML", "Line In",
"AFMR", "Line In";
};
};
&omap4_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <
&twl6040_pins
&mcpdm_pins
&mcbsp1_pins
&dss_hdmi_pins
&tpd12s015_pins
>;
twl6040_pins: pinmux_twl6040_pins {
pinctrl-single,pins = <
0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */
0x160 0x100 /* sys_nirq2.sys_nirq2 INPUT | MODE0 */
>;
};
mcpdm_pins: pinmux_mcpdm_pins {
pinctrl-single,pins = <
0xc6 0x108 /* abe_pdm_ul_data.abe_pdm_ul_data INPUT PULLDOWN | MODE0 */
0xc8 0x108 /* abe_pdm_dl_data.abe_pdm_dl_data INPUT PULLDOWN | MODE0 */
0xca 0x118 /* abe_pdm_frame.abe_pdm_frame INPUT PULLUP | MODE0 */
0xcc 0x108 /* abe_pdm_lb_clk.abe_pdm_lb_clk INPUT PULLDOWN | MODE0 */
0xce 0x108 /* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */
>;
};
mcbsp1_pins: pinmux_mcbsp1_pins {
pinctrl-single,pins = <
0xbe 0x100 /* abe_mcbsp1_clkx.abe_mcbsp1_clkx INPUT | MODE0 */
0xc0 0x108 /* abe_mcbsp1_dr.abe_mcbsp1_dr INPUT PULLDOWN | MODE0 */
0xc2 0x8 /* abe_mcbsp1_dx.abe_mcbsp1_dx OUTPUT PULLDOWN | MODE0 */
0xc4 0x100 /* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */
>;
};
dss_hdmi_pins: pinmux_dss_hdmi_pins {
pinctrl-single,pins = <
0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
0x5c 0x118 /* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */
0x5e 0x118 /* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */
>;
};
tpd12s015_pins: pinmux_tpd12s015_pins {
pinctrl-single,pins = <
0x22 0x3 /* gpmc_a17.gpio_41 OUTPUT | MODE3 */
0x48 0x3 /* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */
0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */
>;
};
};
&i2c1 {
clock-frequency = <400000>;
twl: twl@48 {
reg = <0x48>;
/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */
interrupt-parent = <&gic>;
};
twl6040: twl@4b {
compatible = "ti,twl6040";
reg = <0x4b>;
/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */
interrupt-parent = <&gic>;
ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */
vio-supply = <&v1v8>;
v2v1-supply = <&v2v1>;
enable-active-high;
};
};
/include/ "twl6030.dtsi"
&i2c2 {
clock-frequency = <400000>;
};
&i2c3 {
clock-frequency = <100000>;
/*
* Display monitor features are burnt in their EEPROM as EDID data.
* The EEPROM is connected as I2C slave device.
*/
eeprom@50 {
compatible = "ti,eeprom";
reg = <0x50>;
};
};
&i2c4 {
clock-frequency = <400000>;
};
&mmc1 {
vmmc-supply = <&vmmc>;
bus-width = <8>;
};
&mmc2 {
status = "disabled";
};
&mmc3 {
status = "disabled";
};
&mmc4 {
status = "disabled";
};
&mmc5 {
ti,non-removable;
bus-width = <4>;
};
&emif1 {
cs1-used;
device-handle = <&elpida_ECB240ABACN>;
};
&emif2 {
cs1-used;
device-handle = <&elpida_ECB240ABACN>;
};
&mcbsp2 {
status = "disabled";
};
&mcbsp3 {
status = "disabled";
};
&dmic {
status = "disabled";
};
&twl_usb_comparator {
usb-supply = <&vusb>;
};
/include/ "omap443x.dtsi"
/include/ "omap4-panda-common.dtsi"
arch/arm/boot/dts/omap4-sdp.dts
View file @ d05663a2
......@@ -7,7 +7,7 @@
*/
/dts-v1/;
/include/ "omap4.dtsi"
/include/ "omap443x.dtsi"
/include/ "elpida_ecb240abacn.dtsi"
/ {
......@@ -80,6 +80,32 @@ user3 {
};
};
pwmleds {
compatible = "pwm-leds";
kpad {
label = "omap4::keypad";
pwms = <&twl_pwm 0 7812500>;
max-brightness = <127>;
};
charging {
label = "omap4:green:chrg";
pwms = <&twl_pwmled 0 7812500>;
max-brightness = <255>;
};
};
backlight {
compatible = "pwm-backlight";
pwms = <&twl_pwm 1 7812500>;
brightness-levels = <
0 10 20 30 40
50 60 70 80 90
100 110 120 127
>;
default-brightness-level = <13>;
};
sound {
compatible = "ti,abe-twl6040";
ti,model = "SDP4430";
......@@ -212,9 +238,40 @@ tpd12s015_pins: pinmux_tpd12s015_pins {
0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
0xe2 0x118 /* i2c1_scl PULLUP | INPUTENABLE | MODE0 */
0xe4 0x118 /* i2c1_sda PULLUP | INPUTENABLE | MODE0 */
>;
};
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
0xe6 0x118 /* i2c2_scl PULLUP | INPUTENABLE | MODE0 */
0xe8 0x118 /* i2c2_sda PULLUP | INPUTENABLE | MODE0 */
>;
};
i2c3_pins: pinmux_i2c3_pins {
pinctrl-single,pins = <
0xea 0x118 /* i2c3_scl PULLUP | INPUTENABLE | MODE0 */
0xec 0x118 /* i2c3_sda PULLUP | INPUTENABLE | MODE0 */
>;
};
i2c4_pins: pinmux_i2c4_pins {
pinctrl-single,pins = <
0xee 0x118 /* i2c4_scl PULLUP | INPUTENABLE | MODE0 */
0xf0 0x118 /* i2c4_sda PULLUP | INPUTENABLE | MODE0 */
>;
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
clock-frequency = <400000>;
twl: twl@48 {
......@@ -253,10 +310,16 @@ vibra {
/include/ "twl6030.dtsi"
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
clock-frequency = <400000>;
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&i2c3_pins>;
clock-frequency = <400000>;
/*
......@@ -279,6 +342,9 @@ bh1780@29 {
};
&i2c4 {
pinctrl-names = "default";
pinctrl-0 = <&i2c4_pins>;
clock-frequency = <400000>;
/*
......@@ -428,3 +494,9 @@ &mcbsp3 {
&twl_usb_comparator {
usb-supply = <&vusb>;
};
&usb_otg_hs {
interface-type = <1>;
mode = <3>;
power = <50>;
};
arch/arm/boot/dts/omap4-var-som.dts
View file @ d05663a2
......@@ -7,7 +7,7 @@
*/
/dts-v1/;
/include/ "omap4.dtsi"
/include/ "omap443x.dtsi"
/ {
model = "Variscite OMAP4 SOM";
......
arch/arm/boot/dts/omap4.dtsi
View file @ d05663a2
......@@ -94,6 +94,11 @@ ocp {
#size-cells = <1>;
ranges;
ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
reg = <0x44000000 0x1000>,
<0x44800000 0x2000>,
<0x45000000 0x1000>;
interrupts = <0 9 0x4>,
<0 10 0x4>;
counter32k: counter@4a304000 {
compatible = "ti,omap-counter32k";
......@@ -118,15 +123,28 @@ omap4_pmx_wkup: pinmux@4a31e040 {
pinctrl-single,function-mask = <0x7fff>;
};
sdma: dma-controller@4a056000 {
compatible = "ti,omap4430-sdma";
reg = <0x4a056000 0x1000>;
interrupts = <0 12 0x4>,
<0 13 0x4>,
<0 14 0x4>,
<0 15 0x4>;
#dma-cells = <1>;
#dma-channels = <32>;
#dma-requests = <127>;
};
gpio1: gpio@4a310000 {
compatible = "ti,omap4-gpio";
reg = <0x4a310000 0x200>;
interrupts = <0 29 0x4>;
ti,hwmods = "gpio1";
ti,gpio-always-on;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio2: gpio@48055000 {
......@@ -137,7 +155,7 @@ gpio2: gpio@48055000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio3: gpio@48057000 {
......@@ -148,7 +166,7 @@ gpio3: gpio@48057000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio4: gpio@48059000 {
......@@ -159,7 +177,7 @@ gpio4: gpio@48059000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio5: gpio@4805b000 {
......@@ -170,7 +188,7 @@ gpio5: gpio@4805b000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio6: gpio@4805d000 {
......@@ -181,7 +199,18 @@ gpio6: gpio@4805d000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpmc: gpmc@50000000 {
compatible = "ti,omap4430-gpmc";
reg = <0x50000000 0x1000>;
#address-cells = <2>;
#size-cells = <1>;
interrupts = <0 20 0x4>;
gpmc,num-cs = <8>;
gpmc,num-waitpins = <4>;
ti,hwmods = "gpmc";
};
uart1: serial@4806a000 {
......@@ -260,6 +289,16 @@ mcspi1: spi@48098000 {
#size-cells = <0>;
ti,hwmods = "mcspi1";
ti,spi-num-cs = <4>;
dmas = <&sdma 35>,
<&sdma 36>,
<&sdma 37>,
<&sdma 38>,
<&sdma 39>,
<&sdma 40>,
<&sdma 41>,
<&sdma 42>;
dma-names = "tx0", "rx0", "tx1", "rx1",
"tx2", "rx2", "tx3", "rx3";
};
mcspi2: spi@4809a000 {
......@@ -270,6 +309,11 @@ mcspi2: spi@4809a000 {
#size-cells = <0>;
ti,hwmods = "mcspi2";
ti,spi-num-cs = <2>;
dmas = <&sdma 43>,
<&sdma 44>,
<&sdma 45>,
<&sdma 46>;
dma-names = "tx0", "rx0", "tx1", "rx1";
};
mcspi3: spi@480b8000 {
......@@ -280,6 +324,8 @@ mcspi3: spi@480b8000 {
#size-cells = <0>;
ti,hwmods = "mcspi3";
ti,spi-num-cs = <2>;
dmas = <&sdma 15>, <&sdma 16>;
dma-names = "tx0", "rx0";
};
mcspi4: spi@480ba000 {
......@@ -290,6 +336,8 @@ mcspi4: spi@480ba000 {
#size-cells = <0>;
ti,hwmods = "mcspi4";
ti,spi-num-cs = <1>;
dmas = <&sdma 70>, <&sdma 71>;
dma-names = "tx0", "rx0";
};
mmc1: mmc@4809c000 {
......@@ -299,6 +347,8 @@ mmc1: mmc@4809c000 {
ti,hwmods = "mmc1";
ti,dual-volt;
ti,needs-special-reset;
dmas = <&sdma 61>, <&sdma 62>;
dma-names = "tx", "rx";
};
mmc2: mmc@480b4000 {
......@@ -307,6 +357,8 @@ mmc2: mmc@480b4000 {
interrupts = <0 86 0x4>;
ti,hwmods = "mmc2";
ti,needs-special-reset;
dmas = <&sdma 47>, <&sdma 48>;
dma-names = "tx", "rx";
};
mmc3: mmc@480ad000 {
......@@ -315,6 +367,8 @@ mmc3: mmc@480ad000 {
interrupts = <0 94 0x4>;
ti,hwmods = "mmc3";
ti,needs-special-reset;
dmas = <&sdma 77>, <&sdma 78>;
dma-names = "tx", "rx";
};
mmc4: mmc@480d1000 {
......@@ -323,6 +377,8 @@ mmc4: mmc@480d1000 {
interrupts = <0 96 0x4>;
ti,hwmods = "mmc4";
ti,needs-special-reset;
dmas = <&sdma 57>, <&sdma 58>;
dma-names = "tx", "rx";
};
mmc5: mmc@480d5000 {
......@@ -331,6 +387,8 @@ mmc5: mmc@480d5000 {
interrupts = <0 59 0x4>;
ti,hwmods = "mmc5";
ti,needs-special-reset;
dmas = <&sdma 59>, <&sdma 60>;
dma-names = "tx", "rx";
};
wdt2: wdt@4a314000 {
......@@ -347,6 +405,9 @@ mcpdm: mcpdm@40132000 {
reg-names = "mpu", "dma";
interrupts = <0 112 0x4>;
ti,hwmods = "mcpdm";
dmas = <&sdma 65>,
<&sdma 66>;
dma-names = "up_link", "dn_link";
};
dmic: dmic@4012e000 {
......@@ -356,6 +417,8 @@ dmic: dmic@4012e000 {
reg-names = "mpu", "dma";
interrupts = <0 114 0x4>;
ti,hwmods = "dmic";
dmas = <&sdma 67>;
dma-names = "up_link";
};
mcbsp1: mcbsp@40122000 {
......@@ -367,6 +430,9 @@ mcbsp1: mcbsp@40122000 {
interrupt-names = "common";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp1";
dmas = <&sdma 33>,
<&sdma 34>;
dma-names = "tx", "rx";
};
mcbsp2: mcbsp@40124000 {
......@@ -378,6 +444,9 @@ mcbsp2: mcbsp@40124000 {
interrupt-names = "common";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp2";
dmas = <&sdma 17>,
<&sdma 18>;
dma-names = "tx", "rx";
};
mcbsp3: mcbsp@40126000 {
......@@ -389,6 +458,9 @@ mcbsp3: mcbsp@40126000 {
interrupt-names = "common";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp3";
dmas = <&sdma 19>,
<&sdma 20>;
dma-names = "tx", "rx";
};
mcbsp4: mcbsp@48096000 {
......@@ -399,6 +471,9 @@ mcbsp4: mcbsp@48096000 {
interrupt-names = "common";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp4";
dmas = <&sdma 31>,
<&sdma 32>;
dma-names = "tx", "rx";
};
keypad: keypad@4a31c000 {
......@@ -438,10 +513,15 @@ ocp2scp@4a0ad000 {
#size-cells = <1>;
ranges;
ti,hwmods = "ocp2scp_usb_phy";
usb2_phy: usb2phy@4a0ad080 {
compatible = "ti,omap-usb2";
reg = <0x4a0ad080 0x58>;
ctrl-module = <&omap_control_usb>;
};
};
timer1: timer@4a318000 {
compatible = "ti,omap2-timer";
compatible = "ti,omap3430-timer";
reg = <0x4a318000 0x80>;
interrupts = <0 37 0x4>;
ti,hwmods = "timer1";
......@@ -449,28 +529,28 @@ timer1: timer@4a318000 {
};
timer2: timer@48032000 {
compatible = "ti,omap2-timer";
compatible = "ti,omap3430-timer";
reg = <0x48032000 0x80>;
interrupts = <0 38 0x4>;
ti,hwmods = "timer2";
};
timer3: timer@48034000 {
compatible = "ti,omap2-timer";
compatible = "ti,omap4430-timer";
reg = <0x48034000 0x80>;
interrupts = <0 39 0x4>;
ti,hwmods = "timer3";
};
timer4: timer@48036000 {
compatible = "ti,omap2-timer";
compatible = "ti,omap4430-timer";
reg = <0x48036000 0x80>;
interrupts = <0 40 0x4>;
ti,hwmods = "timer4";
};
timer5: timer@40138000 {
compatible = "ti,omap2-timer";
compatible = "ti,omap4430-timer";
reg = <0x40138000 0x80>,
<0x49038000 0x80>;
interrupts = <0 41 0x4>;
......@@ -479,7 +559,7 @@ timer5: timer@40138000 {
};
timer6: timer@4013a000 {
compatible = "ti,omap2-timer";
compatible = "ti,omap4430-timer";
reg = <0x4013a000 0x80>,
<0x4903a000 0x80>;
interrupts = <0 42 0x4>;
......@@ -488,7 +568,7 @@ timer6: timer@4013a000 {
};
timer7: timer@4013c000 {
compatible = "ti,omap2-timer";
compatible = "ti,omap4430-timer";
reg = <0x4013c000 0x80>,
<0x4903c000 0x80>;
interrupts = <0 43 0x4>;
......@@ -497,7 +577,7 @@ timer7: timer@4013c000 {
};
timer8: timer@4013e000 {
compatible = "ti,omap2-timer";
compatible = "ti,omap4430-timer";
reg = <0x4013e000 0x80>,
<0x4903e000 0x80>;
interrupts = <0 44 0x4>;
......@@ -507,7 +587,7 @@ timer8: timer@4013e000 {
};
timer9: timer@4803e000 {
compatible = "ti,omap2-timer";
compatible = "ti,omap4430-timer";
reg = <0x4803e000 0x80>;
interrupts = <0 45 0x4>;
ti,hwmods = "timer9";
......@@ -515,7 +595,7 @@ timer9: timer@4803e000 {
};
timer10: timer@48086000 {
compatible = "ti,omap2-timer";
compatible = "ti,omap3430-timer";
reg = <0x48086000 0x80>;
interrupts = <0 46 0x4>;
ti,hwmods = "timer10";
......@@ -523,11 +603,62 @@ timer10: timer@48086000 {
};
timer11: timer@48088000 {
compatible = "ti,omap2-timer";
compatible = "ti,omap4430-timer";
reg = <0x48088000 0x80>;
interrupts = <0 47 0x4>;
ti,hwmods = "timer11";
ti,timer-pwm;
};
usbhstll: usbhstll@4a062000 {
compatible = "ti,usbhs-tll";
reg = <0x4a062000 0x1000>;
interrupts = <0 78 0x4>;
ti,hwmods = "usb_tll_hs";
};
usbhshost: usbhshost@4a064000 {
compatible = "ti,usbhs-host";
reg = <0x4a064000 0x800>;
ti,hwmods = "usb_host_hs";
#address-cells = <1>;
#size-cells = <1>;
ranges;
usbhsohci: ohci@4a064800 {
compatible = "ti,ohci-omap3", "usb-ohci";
reg = <0x4a064800 0x400>;
interrupt-parent = <&gic>;
interrupts = <0 76 0x4>;
};
usbhsehci: ehci@4a064c00 {
compatible = "ti,ehci-omap", "usb-ehci";
reg = <0x4a064c00 0x400>;
interrupt-parent = <&gic>;
interrupts = <0 77 0x4>;
};
};
omap_control_usb: omap-control-usb@4a002300 {
compatible = "ti,omap-control-usb";
reg = <0x4a002300 0x4>,
<0x4a00233c 0x4>;
reg-names = "control_dev_conf", "otghs_control";
ti,type = <1>;
};
usb_otg_hs: usb_otg_hs@4a0ab000 {
compatible = "ti,omap4-musb";
reg = <0x4a0ab000 0x7ff>;
interrupts = <0 92 0x4>, <0 93 0x4>;
interrupt-names = "mc", "dma";
ti,hwmods = "usb_otg_hs";
usb-phy = <&usb2_phy>;
multipoint = <1>;
num-eps = <16>;
ram-bits = <12>;
ti,has-mailbox;
};
};
};
arch/arm/boot/dts/omap443x.dtsi 0 → 100644
View file @ d05663a2
/*
* Device Tree Source for OMAP443x SoC
*
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/include/ "omap4.dtsi"
/ {
cpus {
cpu@0 {
/* OMAP443x variants OPP50-OPPNT */
operating-points = <
/* kHz uV */
300000 1025000
600000 1200000
800000 1313000
1008000 1375000
>;
clock-latency = <300000>; /* From legacy driver */
};
};
};
arch/arm/boot/dts/omap4460.dtsi 0 → 100644
View file @ d05663a2
/*
* Device Tree Source for OMAP4460 SoC
*
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/include/ "omap4.dtsi"
/ {
cpus {
/* OMAP446x 'standard device' variants OPP50 to OPPTurbo */
cpu@0 {
operating-points = <
/* kHz uV */
350000 975000
700000 1075000
920000 1200000
>;
clock-latency = <300000>; /* From legacy driver */
};
};
pmu {
compatible = "arm,cortex-a9-pmu";
interrupts = <0 54 0x4>,
<0 55 0x4>;
ti,hwmods = "debugss";
};
};
arch/arm/boot/dts/omap5-evm.dts
View file @ d05663a2
......@@ -16,7 +16,7 @@ / {
memory {
device_type = "memory";
reg = <0x80000000 0x80000000>; /* 2 GB */
reg = <0x80000000 0x7F000000>; /* 2032 MB */
};
vmmcsd_fixed: fixedregulator-mmcsd {
......@@ -80,6 +80,68 @@ mcbsp2_pins: pinmux_mcbsp2_pins {
0x15a 0x100 /* abemcbsp2_clkx.abemcbsp2_clkx INPUT | MODE0 */
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
0x1b2 0x118 /* i2c1_scl PULLUP | INPUTENABLE | MODE0 */
0x1b4 0x118 /* i2c1_sda PULLUP | INPUTENABLE | MODE0 */
>;
};
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
0x178 0x100 /* i2c2_scl INPUTENABLE | MODE0 */
0x17a 0x100 /* i2c2_sda INPUTENABLE | MODE0 */
>;
};
i2c3_pins: pinmux_i2c3_pins {
pinctrl-single,pins = <
0x13a 0x100 /* i2c3_scl INPUTENABLE | MODE0 */
0x13c 0x100 /* i2c3_sda INPUTENABLE | MODE0 */
>;
};
i2c4_pins: pinmux_i2c4_pins {
pinctrl-single,pins = <
0xb8 0x100 /* i2c4_scl INPUTENABLE | MODE0 */
0xba 0x100 /* i2c4_sda INPUTENABLE | MODE0 */
>;
};
i2c5_pins: pinmux_i2c5_pins {
pinctrl-single,pins = <
0x184 0x100 /* i2c5_scl INPUTENABLE | MODE0 */
0x186 0x100 /* i2c5_sda INPUTENABLE | MODE0 */
>;
};
mcspi2_pins: pinmux_mcspi2_pins {
pinctrl-single,pins = <
0xbc 0x100 /* MCSPI2_CLK INPUTENABLE | MODE0 */
0xbe 0x100 /* MCSPI2_SIMO INPUTENABLE | MODE0 */
0xc0 0x118 /* MCSPI2_SOMI PULLUP | INPUTENABLE | MODE0*/
0xc2 0x0 /* MCSPI2_CS MODE0*/
>;
};
mcspi3_pins: pinmux_mcspi3_pins {
pinctrl-single,pins = <
0x78 0x101 /* MCSPI2_SOMI INPUTENABLE | MODE1 */
0x7a 0x101 /* MCSPI2_CS INPUTENABLE | MODE1 */
0x7c 0x101 /* MCSPI2_SIMO INPUTENABLE | MODE1 */
0x7e 0x101 /* MCSPI2_CLK INPUTENABLE | MODE1 */
>;
};
mcspi4_pins: pinmux_mcspi4_pins {
pinctrl-single,pins = <
0x164 0x101 /* MCSPI2_CLK INPUTENABLE | MODE1 */
0x168 0x101 /* MCSPI2_SIMO INPUTENABLE | MODE1 */
0x16a 0x101 /* MCSPI2_SOMI INPUTENABLE | MODE1 */
0x16c 0x101 /* MCSPI2_CS INPUTENABLE | MODE1 */
>;
};
};
&mmc1 {
......@@ -106,7 +168,17 @@ &mmc5 {
status = "disabled";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
clock-frequency = <400000>;
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
clock-frequency = <400000>;
/* Pressure Sensor */
......@@ -116,7 +188,17 @@ bmp085@77 {
};
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&i2c3_pins>;
clock-frequency = <400000>;
};
&i2c4 {
pinctrl-names = "default";
pinctrl-0 = <&i2c4_pins>;
clock-frequency = <400000>;
/* Temperature Sensor */
......@@ -126,6 +208,13 @@ tmp102@48{
};
};
&i2c5 {
pinctrl-names = "default";
pinctrl-0 = <&i2c5_pins>;
clock-frequency = <400000>;
};
&keypad {
keypad,num-rows = <8>;
keypad,num-columns = <8>;
......@@ -151,3 +240,22 @@ &emif2 {
cs1-used;
device-handle = <&samsung_K3PE0E000B>;
};
&mcspi1 {
};
&mcspi2 {
pinctrl-names = "default";
pinctrl-0 = <&mcspi2_pins>;
};
&mcspi3 {
pinctrl-names = "default";
pinctrl-0 = <&mcspi3_pins>;
};
&mcspi4 {
pinctrl-names = "default";
pinctrl-0 = <&mcspi4_pins>;
};
arch/arm/boot/dts/omap5.dtsi
View file @ d05663a2
This diff is collapsed.
arch/arm/boot/dts/twl4030.dtsi
View file @ d05663a2
......@@ -23,6 +23,12 @@ watchdog {
compatible = "ti,twl4030-wdt";
};
vcc: regulator-vdd1 {
compatible = "ti,twl4030-vdd1";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1450000>;
};
vdac: regulator-vdac {
compatible = "ti,twl4030-vdac";
regulator-min-microvolt = <1800000>;
......@@ -67,7 +73,7 @@ twl_gpio: gpio {
#interrupt-cells = <1>;
};
twl4030-usb {
usb2_phy: twl4030-usb {
compatible = "ti,twl4030-usb";
interrupts = <10>, <4>;
usb1v5-supply = <&vusb1v5>;
......@@ -75,4 +81,14 @@ twl4030-usb {
usb3v1-supply = <&vusb3v1>;
usb_mode = <1>;
};
twl_pwm: pwm {
compatible = "ti,twl4030-pwm";
#pwm-cells = <2>;
};
twl_pwmled: pwmled {
compatible = "ti,twl4030-pwmled";
#pwm-cells = <2>;
};
};
arch/arm/boot/dts/twl6030.dtsi
View file @ d05663a2
......@@ -91,4 +91,16 @@ twl_usb_comparator: usb-comparator {
compatible = "ti,twl6030-usb";
interrupts = <4>, <10>;
};
twl_pwm: pwm {
/* provides two PWMs (id 0, 1 for PWM1 and PWM2) */
compatible = "ti,twl6030-pwm";
#pwm-cells = <2>;
};
twl_pwmled: pwmled {
/* provides one PWM (id 0 for Charging indicator LED) */
compatible = "ti,twl6030-pwmled";
#pwm-cells = <2>;
};
};
arch/arm/mach-omap2/board-3430sdp.c
View file @ d05663a2
......@@ -445,16 +445,23 @@ static void enable_board_wakeup_source(void)
OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
}
static struct usbhs_phy_data phy_data[] __initdata = {
{
.port = 1,
.reset_gpio = 57,
.vcc_gpio = -EINVAL,
},
{
.port = 2,
.reset_gpio = 61,
.vcc_gpio = -EINVAL,
},
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
.phy_reset = true,
.reset_gpio_port[0] = 57,
.reset_gpio_port[1] = 61,
.reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
......@@ -606,6 +613,8 @@ static void __init omap_3430sdp_init(void)
board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);
sdp3430_display_init();
enable_board_wakeup_source();
usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
}
......
arch/arm/mach-omap2/board-3630sdp.c
View file @ d05663a2
......@@ -53,16 +53,23 @@ static void enable_board_wakeup_source(void)
OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
}
static struct usbhs_phy_data phy_data[] __initdata = {
{
.port = 1,
.reset_gpio = 126,
.vcc_gpio = -EINVAL,
},
{
.port = 2,
.reset_gpio = 61,
.vcc_gpio = -EINVAL,
},
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
.phy_reset = true,
.reset_gpio_port[0] = 126,
.reset_gpio_port[1] = 61,
.reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
......@@ -199,6 +206,8 @@ static void __init omap_sdp_init(void)
board_smc91x_init();
board_flash_init(sdp_flash_partitions, chip_sel_sdp, NAND_BUSWIDTH_16);
enable_board_wakeup_source();
usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
}
......
arch/arm/mach-omap2/board-am3517crane.c
View file @ d05663a2
......@@ -47,15 +47,17 @@ static struct omap_board_mux board_mux[] __initdata = {
};
#endif
static struct usbhs_phy_data phy_data[] __initdata = {
{
.port = 1,
.reset_gpio = GPIO_USB_NRESET,
.vcc_gpio = GPIO_USB_POWER,
.vcc_polarity = 1,
},
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
.phy_reset = true,
.reset_gpio_port[0] = GPIO_USB_NRESET,
.reset_gpio_port[1] = -EINVAL,
.reset_gpio_port[2] = -EINVAL
};
static struct mtd_partition crane_nand_partitions[] = {
......@@ -131,13 +133,7 @@ static void __init am3517_crane_init(void)
return;
}
ret = gpio_request_one(GPIO_USB_POWER, GPIOF_OUT_INIT_HIGH,
"usb_ehci_enable");
if (ret < 0) {
pr_err("Can not request GPIO %d\n", GPIO_USB_POWER);
return;
}
usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1);
}
......
arch/arm/mach-omap2/board-am3517evm.c
View file @ d05663a2
......@@ -274,6 +274,14 @@ static __init void am3517_evm_mcbsp1_init(void)
omap_ctrl_writel(devconf0, OMAP2_CONTROL_DEVCONF0);
}
static struct usbhs_phy_data phy_data[] __initdata = {
{
.port = 1,
.reset_gpio = 57,
.vcc_gpio = -EINVAL,
},
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
......@@ -282,12 +290,6 @@ static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
#else
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
#endif
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
.phy_reset = true,
.reset_gpio_port[0] = 57,
.reset_gpio_port[1] = -EINVAL,
.reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
......@@ -349,7 +351,6 @@ static struct omap2_hsmmc_info mmc[] = {
{} /* Terminator */
};
static void __init am3517_evm_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
......@@ -361,6 +362,8 @@ static void __init am3517_evm_init(void)
/* Configure GPIO for EHCI port */
omap_mux_init_gpio(57, OMAP_PIN_OUTPUT);
usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
am3517_evm_hecc_init(&am3517_evm_hecc_pdata);
/* DSS */
......
arch/arm/mach-omap2/board-cm-t35.c
View file @ d05663a2
......@@ -419,15 +419,22 @@ static struct omap2_hsmmc_info mmc[] = {
{} /* Terminator */
};
static struct usbhs_phy_data phy_data[] __initdata = {
{
.port = 1,
.reset_gpio = OMAP_MAX_GPIO_LINES + 6,
.vcc_gpio = -EINVAL,
},
{
.port = 2,
.reset_gpio = OMAP_MAX_GPIO_LINES + 7,
.vcc_gpio = -EINVAL,
},
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
.phy_reset = true,
.reset_gpio_port[0] = OMAP_MAX_GPIO_LINES + 6,
.reset_gpio_port[1] = OMAP_MAX_GPIO_LINES + 7,
.reset_gpio_port[2] = -EINVAL
};
static void __init cm_t35_init_usbh(void)
......@@ -444,6 +451,7 @@ static void __init cm_t35_init_usbh(void)
msleep(1);
}
usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
}
......
arch/arm/mach-omap2/board-cm-t3517.c
View file @ d05663a2
......@@ -188,15 +188,22 @@ static inline void cm_t3517_init_rtc(void) {}
#define HSUSB2_RESET_GPIO (147)
#define USB_HUB_RESET_GPIO (152)
static struct usbhs_phy_data phy_data[] __initdata = {
{
.port = 1,
.reset_gpio = HSUSB1_RESET_GPIO,
.vcc_gpio = -EINVAL,
},
{
.port = 2,
.reset_gpio = HSUSB2_RESET_GPIO,
.vcc_gpio = -EINVAL,
},
};
static struct usbhs_omap_platform_data cm_t3517_ehci_pdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
.phy_reset = true,
.reset_gpio_port[0] = HSUSB1_RESET_GPIO,
.reset_gpio_port[1] = HSUSB2_RESET_GPIO,
.reset_gpio_port[2] = -EINVAL,
};
static int __init cm_t3517_init_usbh(void)
......@@ -213,6 +220,7 @@ static int __init cm_t3517_init_usbh(void)
msleep(1);
}
usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&cm_t3517_ehci_pdata);
return 0;
......
arch/arm/mach-omap2/board-devkit8000.c
View file @ d05663a2
......@@ -437,15 +437,7 @@ static struct platform_device *devkit8000_devices[] __initdata = {
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
.phy_reset = true,
.reset_gpio_port[0] = -EINVAL,
.reset_gpio_port[1] = -EINVAL,
.reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
......
arch/arm/mach-omap2/board-generic.c
View file @ d05663a2
......@@ -110,6 +110,7 @@ MACHINE_END
static const char *omap3_gp_boards_compat[] __initdata = {
"ti,omap3-beagle",
"timll,omap3-devkit8000",
NULL,
};
......
arch/arm/mach-omap2/board-igep0020.c
View file @ d05663a2
......@@ -527,26 +527,28 @@ static void __init igep_i2c_init(void)
omap3_pmic_init("twl4030", &igep_twldata);
}
static struct usbhs_phy_data igep2_phy_data[] __initdata = {
{
.port = 1,
.reset_gpio = IGEP2_GPIO_USBH_NRESET,
.vcc_gpio = -EINVAL,
},
};
static struct usbhs_phy_data igep3_phy_data[] __initdata = {
{
.port = 2,
.reset_gpio = IGEP3_GPIO_USBH_NRESET,
.vcc_gpio = -EINVAL,
},
};
static struct usbhs_omap_platform_data igep2_usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
.phy_reset = true,
.reset_gpio_port[0] = IGEP2_GPIO_USBH_NRESET,
.reset_gpio_port[1] = -EINVAL,
.reset_gpio_port[2] = -EINVAL,
};
static struct usbhs_omap_platform_data igep3_usbhs_bdata __initdata = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
.phy_reset = true,
.reset_gpio_port[0] = -EINVAL,
.reset_gpio_port[1] = IGEP3_GPIO_USBH_NRESET,
.reset_gpio_port[2] = -EINVAL,
};
#ifdef CONFIG_OMAP_MUX
......@@ -642,8 +644,10 @@ static void __init igep_init(void)
if (machine_is_igep0020()) {
omap_display_init(&igep2_dss_data);
igep2_init_smsc911x();
usbhs_init_phys(igep2_phy_data, ARRAY_SIZE(igep2_phy_data));
usbhs_init(&igep2_usbhs_bdata);
} else {
usbhs_init_phys(igep3_phy_data, ARRAY_SIZE(igep3_phy_data));
usbhs_init(&igep3_usbhs_bdata);
}
}
......
arch/arm/mach-omap2/board-omap3beagle.c
View file @ d05663a2
......@@ -33,6 +33,7 @@
#include <linux/mtd/nand.h>
#include <linux/mmc/host.h>
#include <linux/usb/phy.h>
#include <linux/usb/nop-usb-xceiv.h>
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
......@@ -277,6 +278,21 @@ static struct regulator_consumer_supply beagle_vsim_supply[] = {
static struct gpio_led gpio_leds[];
/* PHY's VCC regulator might be added later, so flag that we need it */
static struct nop_usb_xceiv_platform_data hsusb2_phy_data = {
.needs_vcc = true,
};
static struct usbhs_phy_data phy_data[] = {
{
.port = 2,
.reset_gpio = 147,
.vcc_gpio = -1, /* updated in beagle_twl_gpio_setup */
.vcc_polarity = 1, /* updated in beagle_twl_gpio_setup */
.platform_data = &hsusb2_phy_data,
},
};
static int beagle_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
......@@ -318,9 +334,11 @@ static int beagle_twl_gpio_setup(struct device *dev,
}
dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio;
gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level,
"nEN_USB_PWR");
/* TWL4030_GPIO_MAX i.e. LED_GPO controls HS USB Port 2 power */
phy_data[0].vcc_gpio = gpio + TWL4030_GPIO_MAX;
phy_data[0].vcc_polarity = beagle_config.usb_pwr_level;
usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
return 0;
}
......@@ -453,15 +471,7 @@ static struct platform_device *omap3_beagle_devices[] __initdata = {
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
.phy_reset = true,
.reset_gpio_port[0] = -EINVAL,
.reset_gpio_port[1] = 147,
.reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
......@@ -543,7 +553,9 @@ static void __init omap3_beagle_init(void)
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
board_nand_init(omap3beagle_nand_partitions,
ARRAY_SIZE(omap3beagle_nand_partitions), NAND_CS,
NAND_BUSWIDTH_16, NULL);
......
arch/arm/mach-omap2/board-omap3evm.c
View file @ d05663a2
......@@ -496,7 +496,7 @@ struct wl12xx_platform_data omap3evm_wlan_data __initdata = {
static struct regulator_consumer_supply omap3evm_vaux2_supplies[] = {
REGULATOR_SUPPLY("VDD_CSIPHY1", "omap3isp"), /* OMAP ISP */
REGULATOR_SUPPLY("VDD_CSIPHY2", "omap3isp"), /* OMAP ISP */
REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"),
REGULATOR_SUPPLY("vcc", "nop_usb_xceiv.2"), /* hsusb port 2 */
REGULATOR_SUPPLY("vaux2", NULL),
};
......@@ -539,17 +539,16 @@ static int __init omap3_evm_i2c_init(void)
return 0;
}
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
static struct usbhs_phy_data phy_data[] __initdata = {
{
.port = 2,
.reset_gpio = -1, /* set at runtime */
.vcc_gpio = -EINVAL,
},
};
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
.phy_reset = true,
/* PHY reset GPIO will be runtime programmed based on EVM version */
.reset_gpio_port[0] = -EINVAL,
.reset_gpio_port[1] = -EINVAL,
.reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
......@@ -725,7 +724,7 @@ static void __init omap3_evm_init(void)
/* setup EHCI phy reset config */
omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP);
usbhs_bdata.reset_gpio_port[1] = 21;
phy_data[0].reset_gpio = 21;
/* EVM REV >= E can supply 500mA with EXTVBUS programming */
musb_board_data.power = 500;
......@@ -733,10 +732,12 @@ static void __init omap3_evm_init(void)
} else {
/* setup EHCI phy reset on MDC */
omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
usbhs_bdata.reset_gpio_port[1] = 135;
phy_data[0].reset_gpio = 135;
}
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(&musb_board_data);
usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
board_nand_init(omap3evm_nand_partitions,
ARRAY_SIZE(omap3evm_nand_partitions), NAND_CS,
......
arch/arm/mach-omap2/board-omap3pandora.c
View file @ d05663a2
......@@ -346,7 +346,7 @@ static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = {
};
static struct regulator_consumer_supply pandora_usb_phy_supply[] = {
REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"),
REGULATOR_SUPPLY("vcc", "nop_usb_xceiv.2"), /* hsusb port 2 */
};
/* ads7846 on SPI and 2 nub controllers on I2C */
......@@ -561,6 +561,14 @@ static void __init pandora_wl1251_init(void)
printk(KERN_ERR "wl1251 board initialisation failed\n");
}
static struct usbhs_phy_data phy_data[] __initdata = {
{
.port = 2,
.reset_gpio = 16,
.vcc_gpio = -EINVAL,
},
};
static struct platform_device *omap3pandora_devices[] __initdata = {
&pandora_leds_gpio,
&pandora_keys_gpio,
......@@ -569,15 +577,7 @@ static struct platform_device *omap3pandora_devices[] __initdata = {
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
.phy_reset = true,
.reset_gpio_port[0] = -EINVAL,
.reset_gpio_port[1] = 16,
.reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
......@@ -601,7 +601,10 @@ static void __init omap3pandora_init(void)
spi_register_board_info(omap3pandora_spi_board_info,
ARRAY_SIZE(omap3pandora_spi_board_info));
omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL);
usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
gpmc_nand_init(&pandora_nand_data, NULL);
......
arch/arm/mach-omap2/board-omap3stalker.c
View file @ d05663a2
......@@ -358,19 +358,20 @@ static int __init omap3_stalker_i2c_init(void)
#define OMAP3_STALKER_TS_GPIO 175
static struct usbhs_phy_data phy_data[] __initdata = {
{
.port = 2,
.reset_gpio = 21,
.vcc_gpio = -EINVAL,
},
};
static struct platform_device *omap3_stalker_devices[] __initdata = {
&keys_gpio,
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
.phy_reset = true,
.reset_gpio_port[0] = -EINVAL,
.reset_gpio_port[1] = 21,
.reset_gpio_port[2] = -EINVAL,
};
#ifdef CONFIG_OMAP_MUX
......@@ -407,6 +408,8 @@ static void __init omap3_stalker_init(void)
omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL);
......
arch/arm/mach-omap2/board-omap3touchbook.c
View file @ d05663a2
......@@ -305,21 +305,22 @@ static struct omap_board_mux board_mux[] __initdata = {
};
#endif
static struct usbhs_phy_data phy_data[] __initdata = {
{
.port = 2,
.reset_gpio = 147,
.vcc_gpio = -EINVAL,
},
};
static struct platform_device *omap3_touchbook_devices[] __initdata = {
&leds_gpio,
&keys_gpio,
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
.phy_reset = true,
.reset_gpio_port[0] = -EINVAL,
.reset_gpio_port[1] = 147,
.reset_gpio_port[2] = -EINVAL
};
static void omap3_touchbook_poweroff(void)
......@@ -368,6 +369,8 @@ static void __init omap3_touchbook_init(void)
omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata);
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
board_nand_init(omap3touchbook_nand_partitions,
ARRAY_SIZE(omap3touchbook_nand_partitions), NAND_CS,
......
arch/arm/mach-omap2/board-omap4panda.c
View file @ d05663a2
......@@ -31,6 +31,7 @@
#include <linux/ti_wilink_st.h>
#include <linux/usb/musb.h>
#include <linux/usb/phy.h>
#include <linux/usb/nop-usb-xceiv.h>
#include <linux/wl12xx.h>
#include <linux/irqchip/arm-gic.h>
#include <linux/platform_data/omap-abe-twl6040.h>
......@@ -132,6 +133,22 @@ static struct platform_device btwilink_device = {
.id = -1,
};
/* PHY device on HS USB Port 1 i.e. nop_usb_xceiv.1 */
static struct nop_usb_xceiv_platform_data hsusb1_phy_data = {
/* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */
.clk_rate = 19200000,
};
static struct usbhs_phy_data phy_data[] __initdata = {
{
.port = 1,
.reset_gpio = GPIO_HUB_NRESET,
.vcc_gpio = GPIO_HUB_POWER,
.vcc_polarity = 1,
.platform_data = &hsusb1_phy_data,
},
};
static struct platform_device *panda_devices[] __initdata = {
&leds_gpio,
&wl1271_device,
......@@ -142,49 +159,19 @@ static struct platform_device *panda_devices[] __initdata = {
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
.phy_reset = false,
.reset_gpio_port[0] = -EINVAL,
.reset_gpio_port[1] = -EINVAL,
.reset_gpio_port[2] = -EINVAL
};
static struct gpio panda_ehci_gpios[] __initdata = {
{ GPIO_HUB_POWER, GPIOF_OUT_INIT_LOW, "hub_power" },
{ GPIO_HUB_NRESET, GPIOF_OUT_INIT_LOW, "hub_nreset" },
};
static void __init omap4_ehci_init(void)
{
int ret;
struct clk *phy_ref_clk;
/* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */
phy_ref_clk = clk_get(NULL, "auxclk3_ck");
if (IS_ERR(phy_ref_clk)) {
pr_err("Cannot request auxclk3\n");
return;
}
clk_set_rate(phy_ref_clk, 19200000);
clk_prepare_enable(phy_ref_clk);
/* disable the power to the usb hub prior to init and reset phy+hub */
ret = gpio_request_array(panda_ehci_gpios,
ARRAY_SIZE(panda_ehci_gpios));
if (ret) {
pr_err("Unable to initialize EHCI power/reset\n");
return;
}
gpio_export(GPIO_HUB_POWER, 0);
gpio_export(GPIO_HUB_NRESET, 0);
gpio_set_value(GPIO_HUB_NRESET, 1);
ret = clk_add_alias("main_clk", "nop_usb_xceiv.1", "auxclk3_ck", NULL);
if (ret)
pr_err("Failed to add main_clk alias to auxclk3_ck\n");
usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
/* enable power to hub */
gpio_set_value(GPIO_HUB_POWER, 1);
}
static struct omap_musb_board_data musb_board_data = {
......
arch/arm/mach-omap2/board-overo.c
View file @ d05663a2
......@@ -458,14 +458,16 @@ static int __init overo_spi_init(void)
return 0;
}
static struct usbhs_phy_data phy_data[] __initdata = {
{
.port = 2,
.reset_gpio = OVERO_GPIO_USBH_NRESET,
.vcc_gpio = -EINVAL,
},
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
.phy_reset = true,
.reset_gpio_port[0] = -EINVAL,
.reset_gpio_port[1] = OVERO_GPIO_USBH_NRESET,
.reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
......@@ -502,6 +504,8 @@ static void __init overo_init(void)
ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL);
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
overo_spi_init();
overo_init_smsc911x();
......
arch/arm/mach-omap2/board-zoom.c
View file @ d05663a2
......@@ -92,14 +92,16 @@ static struct mtd_partition zoom_nand_partitions[] = {
},
};
static struct usbhs_phy_data phy_data[] __initdata = {
{
.port = 2,
.reset_gpio = ZOOM3_EHCI_RESET_GPIO,
.vcc_gpio = -EINVAL,
},
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
.phy_reset = true,
.reset_gpio_port[0] = -EINVAL,
.reset_gpio_port[1] = ZOOM3_EHCI_RESET_GPIO,
.reset_gpio_port[2] = -EINVAL,
};
static void __init omap_zoom_init(void)
......@@ -109,6 +111,8 @@ static void __init omap_zoom_init(void)
} else if (machine_is_omap_zoom3()) {
omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
omap_mux_init_gpio(ZOOM3_EHCI_RESET_GPIO, OMAP_PIN_OUTPUT);
usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
}
......
arch/arm/mach-omap2/cclock33xx_data.c
View file @ d05663a2
......@@ -958,6 +958,14 @@ int __init am33xx_clk_init(void)
clk_set_parent(&timer3_fck, &sys_clkin_ck);
clk_set_parent(&timer6_fck, &sys_clkin_ck);
/*
* The On-Chip 32K RC Osc clock is not an accurate clock-source as per
* the design/spec, so as a result, for example, timer which supposed
* to get expired @60Sec, but will expire somewhere ~@40Sec, which is
* not expected by any use-case, so change WDT1 clock source to PRCM
* 32KHz clock.
*/
clk_set_parent(&wdt1_fck, &clkdiv32k_ick);
return 0;
}
arch/arm/mach-omap2/dpll3xxx.c
View file @ d05663a2
......@@ -480,20 +480,22 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
if (!dd)
return -EINVAL;
__clk_prepare(dd->clk_bypass);
clk_enable(dd->clk_bypass);
__clk_prepare(dd->clk_ref);
clk_enable(dd->clk_ref);
if (__clk_get_rate(dd->clk_bypass) == rate &&
(dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
pr_debug("%s: %s: set rate: entering bypass.\n",
__func__, __clk_get_name(hw->clk));
__clk_prepare(dd->clk_bypass);
clk_enable(dd->clk_bypass);
ret = _omap3_noncore_dpll_bypass(clk);
if (!ret)
new_parent = dd->clk_bypass;
clk_disable(dd->clk_bypass);
__clk_unprepare(dd->clk_bypass);
} else {
__clk_prepare(dd->clk_ref);
clk_enable(dd->clk_ref);
if (dd->last_rounded_rate != rate)
rate = __clk_round_rate(hw->clk, rate);
......@@ -514,6 +516,8 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
ret = omap3_noncore_dpll_program(clk, freqsel);
if (!ret)
new_parent = dd->clk_ref;
clk_disable(dd->clk_ref);
__clk_unprepare(dd->clk_ref);
}
/*
* FIXME - this is all wrong. common code handles reparenting and
......@@ -525,11 +529,6 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
if (!ret)
__clk_reparent(hw->clk, new_parent);
clk_disable(dd->clk_ref);
__clk_unprepare(dd->clk_ref);
clk_disable(dd->clk_bypass);
__clk_unprepare(dd->clk_bypass);
return 0;
}
......
arch/arm/mach-omap2/omap_hwmod.c
View file @ d05663a2
......@@ -138,6 +138,8 @@
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/bootmem.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <asm/system_misc.h>
......@@ -610,8 +612,6 @@ static int _enable_wakeup(struct omap_hwmod *oh, u32 *v)
/* XXX test pwrdm_get_wken for this hwmod's subsystem */
oh->_int_flags |= _HWMOD_WAKEUP_ENABLED;
return 0;
}
......@@ -645,8 +645,6 @@ static int _disable_wakeup(struct omap_hwmod *oh, u32 *v)
/* XXX test pwrdm_get_wken for this hwmod's subsystem */
oh->_int_flags &= ~_HWMOD_WAKEUP_ENABLED;
return 0;
}
......@@ -2349,6 +2347,34 @@ static int _shutdown(struct omap_hwmod *oh)
return 0;
}
/**
* of_dev_hwmod_lookup - look up needed hwmod from dt blob
* @np: struct device_node *
* @oh: struct omap_hwmod *
*
* Parse the dt blob and find out needed hwmod. Recursive function is
* implemented to take care hierarchical dt blob parsing.
* Return: The device node on success or NULL on failure.
*/
static struct device_node *of_dev_hwmod_lookup(struct device_node *np,
struct omap_hwmod *oh)
{
struct device_node *np0 = NULL, *np1 = NULL;
const char *p;
for_each_child_of_node(np, np0) {
if (of_find_property(np0, "ti,hwmods", NULL)) {
p = of_get_property(np0, "ti,hwmods", NULL);
if (!strcmp(p, oh->name))
return np0;
np1 = of_dev_hwmod_lookup(np0, oh);
if (np1)
return np1;
}
}
return NULL;
}
/**
* _init_mpu_rt_base - populate the virtual address for a hwmod
* @oh: struct omap_hwmod * to locate the virtual address
......@@ -2361,7 +2387,8 @@ static int _shutdown(struct omap_hwmod *oh)
static void __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data)
{
struct omap_hwmod_addr_space *mem;
void __iomem *va_start;
void __iomem *va_start = NULL;
struct device_node *np;
if (!oh)
return;
......@@ -2375,10 +2402,18 @@ static void __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data)
if (!mem) {
pr_debug("omap_hwmod: %s: no MPU register target found\n",
oh->name);
return;
/* Extract the IO space from device tree blob */
if (!of_have_populated_dt())
return;
np = of_dev_hwmod_lookup(of_find_node_by_name(NULL, "ocp"), oh);
if (np)
va_start = of_iomap(np, 0);
} else {
va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start);
}
va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start);
if (!va_start) {
pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name);
return;
......@@ -2410,7 +2445,8 @@ static int __init _init(struct omap_hwmod *oh, void *data)
if (oh->_state != _HWMOD_STATE_REGISTERED)
return 0;
_init_mpu_rt_base(oh, NULL);
if (oh->class->sysc)
_init_mpu_rt_base(oh, NULL);
r = _init_clocks(oh, NULL);
if (IS_ERR_VALUE(r)) {
......
arch/arm/mach-omap2/omap_hwmod.h
View file @ d05663a2
......@@ -477,15 +477,13 @@ struct omap_hwmod_omap4_prcm {
* These are for internal use only and are managed by the omap_hwmod code.
*
* _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module
* _HWMOD_WAKEUP_ENABLED: set when the omap_hwmod code has enabled ENAWAKEUP
* _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached
* _HWMOD_SKIP_ENABLE: set if hwmod enabled during init (HWMOD_INIT_NO_IDLE) -
* causes the first call to _enable() to only update the pinmux
*/
#define _HWMOD_NO_MPU_PORT (1 << 0)
#define _HWMOD_WAKEUP_ENABLED (1 << 1)
#define _HWMOD_SYSCONFIG_LOADED (1 << 2)
#define _HWMOD_SKIP_ENABLE (1 << 3)
#define _HWMOD_SYSCONFIG_LOADED (1 << 1)
#define _HWMOD_SKIP_ENABLE (1 << 2)
/*
* omap_hwmod._state definitions
......
arch/arm/mach-omap2/omap_hwmod_33xx_data.c
View file @ d05663a2
......@@ -28,6 +28,7 @@
#include "prm-regbits-33xx.h"
#include "i2c.h"
#include "mmc.h"
#include "wd_timer.h"
/*
* IP blocks
......@@ -2087,8 +2088,21 @@ static struct omap_hwmod am33xx_uart6_hwmod = {
};
/* 'wd_timer' class */
static struct omap_hwmod_class_sysconfig wdt_sysc = {
.rev_offs = 0x0,
.sysc_offs = 0x10,
.syss_offs = 0x14,
.sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_SIDLEMODE |
SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
SIDLE_SMART_WKUP),
.sysc_fields = &omap_hwmod_sysc_type1,
};
static struct omap_hwmod_class am33xx_wd_timer_hwmod_class = {
.name = "wd_timer",
.sysc = &wdt_sysc,
.pre_shutdown = &omap2_wd_timer_disable,
};
/*
......@@ -2099,6 +2113,7 @@ static struct omap_hwmod am33xx_wd_timer1_hwmod = {
.name = "wd_timer2",
.class = &am33xx_wd_timer_hwmod_class,
.clkdm_name = "l4_wkup_clkdm",
.flags = HWMOD_SWSUP_SIDLE,
.main_clk = "wdt1_fck",
.prcm = {
.omap4 = {
......
arch/arm/mach-omap2/pmu.c
View file @ d05663a2
......@@ -11,6 +11,8 @@
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/of.h>
#include <asm/pmu.h>
#include "soc.h"
......@@ -63,6 +65,15 @@ static int __init omap_init_pmu(void)
unsigned oh_num;
char **oh_names;
/* XXX Remove this check when the CTI driver is available */
if (cpu_is_omap443x()) {
pr_info("ARM PMU: not yet supported on OMAP4430 due to missing CTI driver\n");
return 0;
}
if (of_have_populated_dt())
return 0;
/*
* To create an ARM-PMU device the following HWMODs
* are required for the various OMAP2+ devices.
......@@ -75,9 +86,6 @@ static int __init omap_init_pmu(void)
if (cpu_is_omap443x()) {
oh_num = ARRAY_SIZE(omap4430_pmu_oh_names);
oh_names = omap4430_pmu_oh_names;
/* XXX Remove the next two lines when CTI driver available */
pr_info("ARM PMU: not yet supported on OMAP4430 due to missing CTI driver\n");
return 0;
} else if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
oh_num = ARRAY_SIZE(omap3_pmu_oh_names);
oh_names = omap3_pmu_oh_names;
......
arch/arm/mach-omap2/powerdomain.c
View file @ d05663a2
......@@ -52,7 +52,6 @@ enum {
#define ALREADYACTIVE_SWITCH 0
#define FORCEWAKEUP_SWITCH 1
#define LOWPOWERSTATE_SWITCH 2
#define ERROR_SWITCH 3
/* pwrdm_list contains all registered struct powerdomains */
static LIST_HEAD(pwrdm_list);
......@@ -233,10 +232,7 @@ static u8 _pwrdm_save_clkdm_state_and_activate(struct powerdomain *pwrdm,
{
u8 sleep_switch;
if (curr_pwrst < 0) {
WARN_ON(1);
sleep_switch = ERROR_SWITCH;
} else if (curr_pwrst < PWRDM_POWER_ON) {
if (curr_pwrst < PWRDM_POWER_ON) {
if (curr_pwrst > pwrst &&
pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE &&
arch_pwrdm->pwrdm_set_lowpwrstchange) {
......@@ -1091,7 +1087,8 @@ int pwrdm_post_transition(struct powerdomain *pwrdm)
*/
int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 pwrst)
{
u8 curr_pwrst, next_pwrst, sleep_switch;
u8 next_pwrst, sleep_switch;
int curr_pwrst;
int ret = 0;
bool hwsup = false;
......@@ -1107,16 +1104,17 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 pwrst)
pwrdm_lock(pwrdm);
curr_pwrst = pwrdm_read_pwrst(pwrdm);
if (curr_pwrst < 0) {
ret = -EINVAL;
goto osps_out;
}
next_pwrst = pwrdm_read_next_pwrst(pwrdm);
if (curr_pwrst == pwrst && next_pwrst == pwrst)
goto osps_out;
sleep_switch = _pwrdm_save_clkdm_state_and_activate(pwrdm, curr_pwrst,
pwrst, &hwsup);
if (sleep_switch == ERROR_SWITCH) {
ret = -EINVAL;
goto osps_out;
}
ret = pwrdm_set_next_pwrst(pwrdm, pwrst);
if (ret)
......
arch/arm/mach-omap2/timer.c
View file @ d05663a2
......@@ -143,7 +143,12 @@ static struct property device_disabled = {
};
static struct of_device_id omap_timer_match[] __initdata = {
{ .compatible = "ti,omap2-timer", },
{ .compatible = "ti,omap2420-timer", },
{ .compatible = "ti,omap3430-timer", },
{ .compatible = "ti,omap4430-timer", },
{ .compatible = "ti,omap5430-timer", },
{ .compatible = "ti,am335x-timer", },
{ .compatible = "ti,am335x-timer-1ms", },
{ }
};
......
arch/arm/mach-omap2/usb-host.c
View file @ d05663a2
......@@ -22,8 +22,12 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/dma-mapping.h>
#include <asm/io.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <linux/string.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/usb/phy.h>
#include "soc.h"
#include "omap_device.h"
......@@ -526,3 +530,155 @@ void __init usbhs_init(struct usbhs_omap_platform_data *pdata)
}
#endif
/* Template for PHY regulators */
static struct fixed_voltage_config hsusb_reg_config = {
/* .supply_name filled later */
.microvolts = 3300000,
.gpio = -1, /* updated later */
.startup_delay = 70000, /* 70msec */
.enable_high = 1, /* updated later */
.enabled_at_boot = 0, /* keep in RESET */
/* .init_data filled later */
};
static const char *nop_name = "nop_usb_xceiv"; /* NOP PHY driver */
static const char *reg_name = "reg-fixed-voltage"; /* Regulator driver */
/**
* usbhs_add_regulator - Add a gpio based fixed voltage regulator device
* @name: name for the regulator
* @dev_id: device id of the device this regulator supplies power to
* @dev_supply: supply name that the device expects
* @gpio: GPIO number
* @polarity: 1 - Active high, 0 - Active low
*/
static int usbhs_add_regulator(char *name, char *dev_id, char *dev_supply,
int gpio, int polarity)
{
struct regulator_consumer_supply *supplies;
struct regulator_init_data *reg_data;
struct fixed_voltage_config *config;
struct platform_device *pdev;
int ret;
supplies = kzalloc(sizeof(*supplies), GFP_KERNEL);
if (!supplies)
return -ENOMEM;
supplies->supply = dev_supply;
supplies->dev_name = dev_id;
reg_data = kzalloc(sizeof(*reg_data), GFP_KERNEL);
if (!reg_data)
return -ENOMEM;
reg_data->constraints.valid_ops_mask = REGULATOR_CHANGE_STATUS;
reg_data->consumer_supplies = supplies;
reg_data->num_consumer_supplies = 1;
config = kmemdup(&hsusb_reg_config, sizeof(hsusb_reg_config),
GFP_KERNEL);
if (!config)
return -ENOMEM;
config->supply_name = name;
config->gpio = gpio;
config->enable_high = polarity;
config->init_data = reg_data;
/* create a regulator device */
pdev = kzalloc(sizeof(*pdev), GFP_KERNEL);
if (!pdev)
return -ENOMEM;
pdev->id = PLATFORM_DEVID_AUTO;
pdev->name = reg_name;
pdev->dev.platform_data = config;
ret = platform_device_register(pdev);
if (ret)
pr_err("%s: Failed registering regulator %s for %s\n",
__func__, name, dev_id);
return ret;
}
int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys)
{
char *rail_name;
int i, len;
struct platform_device *pdev;
char *phy_id;
/* the phy_id will be something like "nop_usb_xceiv.1" */
len = strlen(nop_name) + 3; /* 3 -> ".1" and NULL terminator */
for (i = 0; i < num_phys; i++) {
if (!phy->port) {
pr_err("%s: Invalid port 0. Must start from 1\n",
__func__);
continue;
}
/* do we need a NOP PHY device ? */
if (!gpio_is_valid(phy->reset_gpio) &&
!gpio_is_valid(phy->vcc_gpio))
continue;
/* create a NOP PHY device */
pdev = kzalloc(sizeof(*pdev), GFP_KERNEL);
if (!pdev)
return -ENOMEM;
pdev->id = phy->port;
pdev->name = nop_name;
pdev->dev.platform_data = phy->platform_data;
phy_id = kmalloc(len, GFP_KERNEL);
if (!phy_id)
return -ENOMEM;
scnprintf(phy_id, len, "nop_usb_xceiv.%d\n",
pdev->id);
if (platform_device_register(pdev)) {
pr_err("%s: Failed to register device %s\n",
__func__, phy_id);
continue;
}
usb_bind_phy("ehci-omap.0", phy->port - 1, phy_id);
/* Do we need RESET regulator ? */
if (gpio_is_valid(phy->reset_gpio)) {
rail_name = kmalloc(13, GFP_KERNEL);
if (!rail_name)
return -ENOMEM;
scnprintf(rail_name, 13, "hsusb%d_reset", phy->port);
usbhs_add_regulator(rail_name, phy_id, "reset",
phy->reset_gpio, 1);
}
/* Do we need VCC regulator ? */
if (gpio_is_valid(phy->vcc_gpio)) {
rail_name = kmalloc(13, GFP_KERNEL);
if (!rail_name)
return -ENOMEM;
scnprintf(rail_name, 13, "hsusb%d_vcc", phy->port);
usbhs_add_regulator(rail_name, phy_id, "vcc",
phy->vcc_gpio, phy->vcc_polarity);
}
phy++;
}
return 0;
}
arch/arm/mach-omap2/usb.h
View file @ d05663a2
......@@ -53,8 +53,17 @@
#define USBPHY_OTGSESSEND_EN (1 << 20)
#define USBPHY_DATA_POLARITY (1 << 23)
struct usbhs_phy_data {
int port; /* 1 indexed port number */
int reset_gpio;
int vcc_gpio;
bool vcc_polarity; /* 1 active high, 0 active low */
void *platform_data;
};
extern void usb_musb_init(struct omap_musb_board_data *board_data);
extern void usbhs_init(struct usbhs_omap_platform_data *pdata);
extern int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys);
extern void am35x_musb_reset(void);
extern void am35x_musb_phy_power(u8 on);
......
arch/arm/plat-omap/dmtimer.c
View file @ d05663a2
This diff is collapsed.
arch/arm/plat-omap/include/plat/dmtimer.h
View file @ d05663a2
......@@ -128,6 +128,7 @@ int omap_dm_timer_reserve_systimer(int id);
struct omap_dm_timer *omap_dm_timer_request(void);
struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id);
struct omap_dm_timer *omap_dm_timer_request_by_cap(u32 cap);
struct omap_dm_timer *omap_dm_timer_request_by_node(struct device_node *np);
int omap_dm_timer_free(struct omap_dm_timer *timer);
void omap_dm_timer_enable(struct omap_dm_timer *timer);
void omap_dm_timer_disable(struct omap_dm_timer *timer);
......
include/linux/usb/nop-usb-xceiv.h
View file @ d05663a2
......@@ -5,6 +5,11 @@
struct nop_usb_xceiv_platform_data {
enum usb_phy_type type;
unsigned long clk_rate;
/* if set fails with -EPROBE_DEFER if can't get regulator */
unsigned int needs_vcc:1;
unsigned int needs_reset:1;
};
#if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE))
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7