Merge tag 'xgene-dts-fixes-for-v4.5' of https://github.com/AppliedMicro/xgene-next into next/dt64

Merge "Fixes for X-Gene DTS for v4.5" from Duc Dang:

This patch set fixes the node names of X-Gene I2C, GPIO
controller DT nodes; and also removes I2C clock nodes as
the same clock is shared between 2 I2C controllers
on X-Gene SoC.

* tag 'xgene-dts-fixes-for-v4.5' of https://github.com/AppliedMicro/xgene-next:
  arm64: dts: X-Gene v2: I2C1 clock is always on
  arm64: dts: X-Gene v1: I2C0 clock is always on
  arm64: dts: Fix to use standard DT node names for X-Gene 1 and X-Gene 2 platforms

arch/arm64/boot/dts/apm/apm-shadowcat.dtsi

@@ -334,19 +334,6 @@ rngpkaclk: rngpkaclk@17000000 {
 				clock-output-names = "rngpkaclk";
 			};
 
-			i2c1clk: i2c1clk@17000000 {
-				compatible = "apm,xgene-device-clock";
-				#clock-cells = <1>;
-				clocks = <&sbapbclk 0>;
-				reg = <0x0 0x17000000 0x0 0x2000>;
-				reg-names = "csr-reg";
-				csr-offset = <0xc>;
-				csr-mask = <0x4>;
-				enable-offset = <0x10>;
-				enable-mask = <0x4>;
-				clock-output-names = "i2c1clk";
-			};
-
 			i2c4clk: i2c4clk@1704c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
@@ -476,6 +463,7 @@ serial0: serial@10600000 {
 			interrupts = <0x0 0x4c 0x4>;
 		};
 
+		/* Do not change dwusb name, coded for backward compatibility */
 		usb0: dwusb@19000000 {
 			status = "disabled";
 			compatible = "snps,dwc3";
@@ -575,14 +563,14 @@ mmc0: mmc@1c000000 {
 			clocks = <&sdioclk 0>, <&ahbclk 0>;
 		};
 
-		gfcgpio: gfcgpio@1f63c000 {
+		gfcgpio: gpio@1f63c000 {
 			compatible = "apm,xgene-gpio";
 			reg = <0x0 0x1f63c000 0x0 0x40>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
-		dwgpio: dwgpio@1c024000 {
+		dwgpio: gpio@1c024000 {
 			compatible = "snps,dw-apb-gpio";
 			reg = <0x0 0x1c024000 0x0 0x1000>;
 			reg-io-width = <4>;
@@ -597,7 +585,7 @@ porta: gpio-controller@0 {
 			};
 		};
 
-		sbgpio: sbgpio@17001000{
+		sbgpio: gpio@17001000{
 			compatible = "apm,xgene-gpio-sb";
 			reg = <0x0 0x17001000 0x0 0x400>;
 			#gpio-cells = <2>;
@@ -648,18 +636,18 @@ rng: rng@10520000 {
 			clocks = <&rngpkaclk 0>;
 		};
 
-		i2c1: i2c1@10511000 {
+		i2c1: i2c@10511000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "snps,designware-i2c";
 			reg = <0x0 0x10511000 0x0 0x1000>;
 			interrupts = <0 0x45 0x4>;
 			#clock-cells = <1>;
-			clocks = <&i2c1clk 0>;
+			clocks = <&sbapbclk 0>;
 			bus_num = <1>;
 		};
 
-		i2c4: i2c4@10640000 {
+		i2c4: i2c@10640000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "snps,designware-i2c";

arch/arm64/boot/dts/apm/apm-storm.dtsi

@@ -437,20 +437,6 @@ dmaclk: dmaclk@1f27c000 {
 				reg-names = "csr-reg";
 				clock-output-names = "dmaclk";
 			};
-
-			i2cclk: i2cclk@17000000 {
-				status = "disabled";
-				compatible = "apm,xgene-device-clock";
-				#clock-cells = <1>;
-				clocks = <&ahbclk 0>;
-				reg = <0x0 0x17000000 0x0 0x2000>;
-				reg-names = "csr-reg";
-				csr-offset = <0xc>;
-				csr-mask = <0x4>;
-				enable-offset = <0x10>;
-				enable-mask = <0x4>;
-				clock-output-names = "i2cclk";
-			};
 		};
 
 		msi: msi@79000000 {
@@ -759,14 +745,14 @@ mmc0: mmc@1c000000 {
 			clocks = <&sdioclk 0>, <&ahbclk 0>;
 		};
 
-		gfcgpio: gfcgpio0@1701c000 {
+		gfcgpio: gpio0@1701c000 {
 			compatible = "apm,xgene-gpio";
 			reg = <0x0 0x1701c000 0x0 0x40>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
-		dwgpio: dwgpio@1c024000 {
+		dwgpio: gpio@1c024000 {
 			compatible = "snps,dw-apb-gpio";
 			reg = <0x0 0x1c024000 0x0 0x1000>;
 			reg-io-width = <4>;
@@ -781,7 +767,7 @@ porta: gpio-controller@0 {
 			};
 		};
 
-		i2c0: i2c0@10512000 {
+		i2c0: i2c@10512000 {
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -789,7 +775,7 @@ i2c0: i2c0@10512000 {
 			reg = <0x0 0x10512000 0x0 0x1000>;
 			interrupts = <0 0x44 0x4>;
 			#clock-cells = <1>;
-			clocks = <&i2cclk 0>;
+			clocks = <&ahbclk 0>;
 			bus_num = <0>;
 		};
 
@@ -886,7 +872,7 @@ usb1: dwusb@19800000 {
 			dr_mode = "host";
 		};
 
-		sbgpio: sbgpio@17001000{
+		sbgpio: gpio@17001000{
 			compatible = "apm,xgene-gpio-sb";
 			reg = <0x0 0x17001000 0x0 0x400>;
 			#gpio-cells = <2>;