Merge branch 'for-arm-soc-next' of git://git.linaro.org/people/ljones/linux-3.0-ux500 into next/dt

From Lee Jones <lee.jones@linaro.org>:

* 'for-arm-soc-next' of git://git.linaro.org/people/ljones/linux-3.0-ux500:
  ARM: ux500: Remove PMU platform registration when booting with DT
  ARM: ux500: Remove temporary snowball_of_platform_devs enablement structure
  ARM: ux500: Ensure vendor specific properties have the vendor's identifier
  pinctrl: pinctrl-nomadik: Append sleepmode property with vendor specific prefixes
  ARM: ux500: Move rtc-pl031 registration to Device Tree when enabled
  ARM: ux500: Enable the AB8500 RTC for all DT:ed DB8500 based devices
  ARM: ux500: Correctly reference IRQs supplied by the AB8500 from Device Tree
  ARM: ux500: Apply ab8500-debug node do the db8500 DT structure
  ARM: ux500: Add a ab8500-usb Device Tree node for db8500 based devices
  ARM: ux500: Add db8500 Device Tree node for misc/ab8500-pwm
  ARM: ux500: Add db8500 Device Tree node for ab8500-sysctrl
  ARM: ux500: Enable LED heartbeat functionality on Snowbal via DT
  ARM: ux500: Enable LED heartbeat functionality on Snowball
  ARM: ux500: Add support for input/ponkey into the db8500's Device Tree
  ARM: ux500: Add a ab8500-gpadc node to the db8500 Device Tree
  ARM: ux500: Enable the user LED on Snowball via Device Tree
  ARM: ux500: Kconfig: Compile in leds-gpio support for Snowball
  ARM: ux500: Provide auxdata to be used as name base clock search for nmk-i2c
  ARM: ux500: Remove unused i2c platform_data initialisation code
  ARM: ux500: Enable Device Tree support mmci for Snowball
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/gpio/gpio-nmk.txt

@@ -26,6 +26,6 @@ Example:
                         #gpio-cells = <2>;
                         gpio-controller;
                         interrupt-controller;
-                        supports-sleepmode;
+                        st,supports-sleepmode;
                         gpio-bank = <1>;
                 };

arch/arm/boot/dts/db8500.dtsi

@@ -48,7 +48,7 @@ timer@a0410600 {
 		};
 
 		rtc@80154000 {
-			compatible = "stericsson,db8500-rtc";
+			compatible = "arm,rtc-pl031", "arm,primecell";
 			reg = <0x80154000 0x1000>;
 			interrupts = <0 18 0x4>;
 		};
@@ -60,7 +60,7 @@ gpio0: gpio@8012e000 {
 			interrupts = <0 119 0x4>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			supports-sleepmode;
+			st,supports-sleepmode;
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <0>;
@@ -73,7 +73,7 @@ gpio1: gpio@8012e080 {
 			interrupts = <0 120 0x4>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			supports-sleepmode;
+			st,supports-sleepmode;
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <1>;
@@ -86,7 +86,7 @@ gpio2: gpio@8000e000 {
 			interrupts = <0 121 0x4>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			supports-sleepmode;
+			st,supports-sleepmode;
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <2>;
@@ -99,7 +99,7 @@ gpio3: gpio@8000e080 {
 			interrupts = <0 122 0x4>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			supports-sleepmode;
+			st,supports-sleepmode;
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <3>;
@@ -112,7 +112,7 @@ gpio4: gpio@8000e100 {
 			interrupts = <0 123 0x4>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			supports-sleepmode;
+			st,supports-sleepmode;
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <4>;
@@ -125,7 +125,7 @@ gpio5: gpio@8000e180 {
 			interrupts = <0 124 0x4>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			supports-sleepmode;
+			st,supports-sleepmode;
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <5>;
@@ -138,7 +138,7 @@ gpio6: gpio@8011e000 {
 			interrupts = <0 125 0x4>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			supports-sleepmode;
+			st,supports-sleepmode;
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <6>;
@@ -151,7 +151,7 @@ gpio7: gpio@8011e080 {
 			interrupts = <0 126 0x4>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			supports-sleepmode;
+			st,supports-sleepmode;
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <7>;
@@ -164,7 +164,7 @@ gpio8: gpio@a03fe000 {
 			interrupts = <0 127 0x4>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			supports-sleepmode;
+			st,supports-sleepmode;
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <8>;
@@ -312,6 +312,63 @@ ab8500@5 {
 				compatible = "stericsson,ab8500";
 				reg = <5>; /* mailbox 5 is i2c */
 				interrupts = <0 40 0x4>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				ab8500-rtc {
+					compatible = "stericsson,ab8500-rtc";
+					interrupts = <17 0x4
+					              18 0x4>;
+					interrupt-names = "60S", "ALARM";
+				};
+
+				ab8500-gpadc {
+					compatible = "stericsson,ab8500-gpadc";
+					interrupts = <32 0x4
+						      39 0x4>;
+					interrupt-names = "HW_CONV_END", "SW_CONV_END";
+					vddadc-supply = <&ab8500_ldo_tvout_reg>;
+				};
+
+				ab8500-usb {
+					compatible = "stericsson,ab8500-usb";
+					interrupts = < 90 0x4
+						       96 0x4
+						       14 0x4
+						       15 0x4
+						       79 0x4
+						       74 0x4
+						       75 0x4>;
+					interrupt-names = "ID_WAKEUP_R",
+							  "ID_WAKEUP_F",
+							  "VBUS_DET_F",
+							  "VBUS_DET_R",
+							  "USB_LINK_STATUS",
+							  "USB_ADP_PROBE_PLUG",
+							  "USB_ADP_PROBE_UNPLUG";
+					vddulpivio18-supply = <&ab8500_ldo_initcore_reg>;
+					v-ape-supply = <&db8500_vape_reg>;
+					musb_1v8-supply = <&db8500_vsmps2_reg>;
+				};
+
+				ab8500-ponkey {
+					compatible = "stericsson,ab8500-ponkey";
+					interrupts = <6 0x4
+						      7 0x4>;
+					interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
+				};
+
+				ab8500-sysctrl {
+					compatible = "stericsson,ab8500-sysctrl";
+				};
+
+				ab8500-pwm {
+					compatible = "stericsson,ab8500-pwm";
+				};
+
+				ab8500-debugfs {
+					compatible = "stericsson,ab8500-debug";
+				};
 
 				ab8500-regulators {
 					compatible = "stericsson,ab8500-regulator";

arch/arm/boot/dts/snowball.dts

@@ -77,6 +77,8 @@ leds {
 		used-led {
 			label = "user_led";
 			gpios = <&gpio4 14 0x4>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
 		};
 	};
 
@@ -101,15 +103,30 @@ ethernet@0 {
 			};
 		};
 
+		// External Micro SD slot
 		sdi@80126000 {
-			status = "enabled";
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <8>;
+			mmc-cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+
+			#gpio-cells = <1>;
 			cd-gpios  = <&gpio6 26 0x4>; // 218
+			cd-inverted;
+
+			status = "okay";
 		};
 
+		// On-board eMMC
 		sdi@80114000 {
-			status = "enabled";
+			arm,primecell-periphid = <0x10480180>;
+		        max-frequency = <50000000>;
+			bus-width = <8>;
+			mmc-cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux2_reg>;
+
+			status = "okay";
 		};
 
 		uart@80120000 {

arch/arm/mach-ux500/Kconfig

@@ -41,6 +41,7 @@ config MACH_HREFV60
 config MACH_SNOWBALL
 	bool "U8500 Snowball platform"
 	select MACH_MOP500
+	select LEDS_GPIO
 	help
 	  Include support for the snowball development platform.
 

arch/arm/mach-ux500/board-mop500-sdi.c

@@ -80,7 +80,7 @@ static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = {
 };
 #endif
 
-static struct mmci_platform_data mop500_sdi0_data = {
+struct mmci_platform_data mop500_sdi0_data = {
 	.ios_handler	= mop500_sdi0_ios_handler,
 	.ocr_mask	= MMC_VDD_29_30,
 	.f_max		= 50000000,
@@ -227,7 +227,7 @@ static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = {
 };
 #endif
 
-static struct mmci_platform_data mop500_sdi4_data = {
+struct mmci_platform_data mop500_sdi4_data = {
 	.ocr_mask	= MMC_VDD_29_30,
 	.f_max		= 50000000,
 	.capabilities	= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |

arch/arm/mach-ux500/board-mop500.c

@@ -58,7 +58,7 @@
 static struct gpio_led snowball_led_array[] = {
 	{
 		.name = "user_led",
-		.default_trigger = "none",
+		.default_trigger = "heartbeat",
 		.gpio = 142,
 	},
 };
@@ -331,43 +331,12 @@ static struct i2c_board_info __initdata mop500_i2c2_devices[] = {
 	},
 };
 
-#define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, t_out, _sm)	\
-static struct nmk_i2c_controller u8500_i2c##id##_data = { \
-	/*				\
-	 * slave data setup time, which is	\
-	 * 250 ns,100ns,10ns which is 14,6,2	\
-	 * respectively for a 48 Mhz	\
-	 * i2c clock			\
-	 */				\
-	.slsu		= _slsu,	\
-	/* Tx FIFO threshold */		\
-	.tft		= _tft,		\
-	/* Rx FIFO threshold */		\
-	.rft		= _rft,		\
-	/* std. mode operation */	\
-	.clk_freq	= clk,		\
-	/* Slave response timeout(ms) */\
-	.timeout	= t_out,	\
-	.sm		= _sm,		\
-}
-
-/*
- * The board uses 4 i2c controllers, initialize all of
- * them with slave data setup time of 250 ns,
- * Tx & Rx FIFO threshold values as 8 and standard
- * mode of operation
- */
-U8500_I2C_CONTROLLER(0, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
-U8500_I2C_CONTROLLER(1, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
-U8500_I2C_CONTROLLER(2,	0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
-U8500_I2C_CONTROLLER(3,	0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
-
 static void __init mop500_i2c_init(struct device *parent)
 {
-	db8500_add_i2c0(parent, &u8500_i2c0_data);
-	db8500_add_i2c1(parent, &u8500_i2c1_data);
-	db8500_add_i2c2(parent, &u8500_i2c2_data);
-	db8500_add_i2c3(parent, &u8500_i2c3_data);
+	db8500_add_i2c0(parent, NULL);
+	db8500_add_i2c1(parent, NULL);
+	db8500_add_i2c2(parent, NULL);
+	db8500_add_i2c3(parent, NULL);
 }
 
 static struct gpio_keys_button mop500_gpio_keys[] = {
@@ -776,6 +745,8 @@ struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat),
 	/* Requires DMA bindings. */
 	OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0",  &ssp0_plat),
+	OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0",  &mop500_sdi0_data),
+	OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4",  &mop500_sdi4_data),
 	/* Requires clock name bindings. */
 	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL),
 	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e080, "gpio.1", NULL),
@@ -786,6 +757,11 @@ struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL),
 	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL),
 	OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL),
+	OF_DEV_AUXDATA("st,nomadik-i2c", 0x80004000, "nmk-i2c.0", NULL),
+	OF_DEV_AUXDATA("st,nomadik-i2c", 0x80122000, "nmk-i2c.1", NULL),
+	OF_DEV_AUXDATA("st,nomadik-i2c", 0x80128000, "nmk-i2c.2", NULL),
+	OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL),
+	OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),
 	/* Requires device name bindings. */
 	OF_DEV_AUXDATA("stericsson,nmk_pinctrl", 0, "pinctrl-db8500", NULL),
 	{},
@@ -820,8 +796,6 @@ static void __init u8500_init_machine(void)
 
 	for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
 		mop500_platform_devs[i]->dev.parent = parent;
-	for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++)
-		snowball_platform_devs[i]->dev.parent = parent;
 
 	/* automatically probe child nodes of db8500 device */
 	of_platform_populate(NULL, u8500_local_bus_nodes, u8500_auxdata_lookup, parent);
@@ -840,18 +814,6 @@ static void __init u8500_init_machine(void)
 
 		mop500_uib_init();
 
-	} else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
-		/*
-		 * Devices to be DT:ed:
-		 *   snowball_led_dev   = todo
-		 *   snowball_key_dev   = todo
-		 *   snowball_sbnet_dev = done
-		 *   ab8500_device      = done
-		 */
-		platform_add_devices(snowball_of_platform_devs,
-				ARRAY_SIZE(snowball_of_platform_devs));
-
-		snowball_sdi_init(parent);
 	} else if (of_machine_is_compatible("st-ericsson,hrefv60+")) {
 		/*
 		 * The HREFv60 board removed a GPIO expander and routed
@@ -873,7 +835,6 @@ static void __init u8500_init_machine(void)
 
 		mop500_uib_init();
 	}
-	mop500_i2c_init(parent);
 
 	/* This board has full regulator constraints */
 	regulator_has_full_constraints();

arch/arm/mach-ux500/board-mop500.h

@@ -9,6 +9,7 @@
 
 /* For NOMADIK_NR_GPIO */
 #include <mach/irqs.h>
+#include <linux/amba/mmci.h>
 
 /* Snowball specific GPIO assignments, this board has no GPIO expander */
 #define SNOWBALL_ACCEL_INT1_GPIO	163
@@ -78,6 +79,8 @@
 
 struct device;
 struct i2c_board_info;
+extern struct mmci_platform_data mop500_sdi0_data;
+extern struct mmci_platform_data mop500_sdi4_data;
 
 extern void mop500_sdi_init(struct device *parent);
 extern void snowball_sdi_init(struct device *parent);

arch/arm/mach-ux500/cpu-db8500.c

@@ -139,7 +139,6 @@ static struct platform_device *platform_devs[] __initdata = {
 
 static struct platform_device *of_platform_devs[] __initdata = {
 	&u8500_dma40_device,
-	&db8500_pmu_device,
 };
 
 static resource_size_t __initdata db8500_gpio_base[] = {
@@ -237,7 +236,6 @@ struct device * __init u8500_of_init_devices(void)
 
 	parent = db8500_soc_device_init();
 
-	db8500_add_rtc(parent);
 	db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
 
 	platform_device_register_data(parent,
@@ -249,7 +247,7 @@ struct device * __init u8500_of_init_devices(void)
 	/*
 	 * Devices to be DT:ed:
 	 *   u8500_dma40_device  = todo
-	 *   db8500_pmu_device   = todo
+	 *   db8500_pmu_device   = done
 	 *   db8500_prcmu_device = done
 	 */
 	platform_add_devices(of_platform_devs, ARRAY_SIZE(of_platform_devs));

drivers/i2c/busses/i2c-nomadik.c

@@ -965,8 +965,7 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev)
 	adap->owner	= THIS_MODULE;
 	adap->class	= I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	adap->algo	= &nmk_i2c_algo;
-	adap->timeout	= pdata->timeout ? msecs_to_jiffies(pdata->timeout) :
-		msecs_to_jiffies(20000);
+	adap->timeout	= msecs_to_jiffies(pdata->timeout);
 	snprintf(adap->name, sizeof(adap->name),
 		 "Nomadik I2C%d at %lx", pdev->id, (unsigned long)res->start);
 

drivers/pinctrl/pinctrl-nomadik.c

@@ -1198,7 +1198,7 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev)
 		if (!pdata)
 			return -ENOMEM;
 
-		if (of_get_property(np, "supports-sleepmode", NULL))
+		if (of_get_property(np, "st,supports-sleepmode", NULL))
 			pdata->supports_sleepmode = true;
 
 		if (of_property_read_u32(np, "gpio-bank", &dev->id)) {