Commit d0c2c997 authored by Jarod Wilson's avatar Jarod Wilson Committed by David S. Miller

net: use core MTU range checking in virt drivers

hyperv_net:
- set min/max_mtu, per Haiyang, after rndis_filter_device_add

virtio_net:
- set min/max_mtu
- remove virtnet_change_mtu

vmxnet3:
- set min/max_mtu

xen-netback:
- min_mtu = 0, max_mtu = 65517

xen-netfront:
- min_mtu = 0, max_mtu = 65535

unisys/visor:
- clean up defines a little to not clash with network core or add
  redundat definitions

CC: netdev@vger.kernel.org
CC: virtualization@lists.linux-foundation.org
CC: "K. Y. Srinivasan" <kys@microsoft.com>
CC: Haiyang Zhang <haiyangz@microsoft.com>
CC: "Michael S. Tsirkin" <mst@redhat.com>
CC: Shrikrishna Khare <skhare@vmware.com>
CC: "VMware, Inc." <pv-drivers@vmware.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Paul Durrant <paul.durrant@citrix.com>
CC: David Kershner <david.kershner@unisys.com>
Signed-off-by: default avatarJarod Wilson <jarod@redhat.com>
Reviewed-by: default avatarHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 91572088
......@@ -606,8 +606,8 @@ struct nvsp_message {
} __packed;
#define NETVSC_MTU 65536
#define NETVSC_MTU_MIN 68
#define NETVSC_MTU 65535
#define NETVSC_MTU_MIN ETH_MIN_MTU
#define NETVSC_RECEIVE_BUFFER_SIZE (1024*1024*16) /* 16MB */
#define NETVSC_RECEIVE_BUFFER_SIZE_LEGACY (1024*1024*15) /* 15MB */
......
......@@ -872,19 +872,12 @@ static int netvsc_change_mtu(struct net_device *ndev, int mtu)
struct netvsc_device *nvdev = ndevctx->nvdev;
struct hv_device *hdev = ndevctx->device_ctx;
struct netvsc_device_info device_info;
int limit = ETH_DATA_LEN;
u32 num_chn;
int ret = 0;
if (ndevctx->start_remove || !nvdev || nvdev->destroy)
return -ENODEV;
if (nvdev->nvsp_version >= NVSP_PROTOCOL_VERSION_2)
limit = NETVSC_MTU - ETH_HLEN;
if (mtu < NETVSC_MTU_MIN || mtu > limit)
return -EINVAL;
ret = netvsc_close(ndev);
if (ret)
goto out;
......@@ -1402,6 +1395,13 @@ static int netvsc_probe(struct hv_device *dev,
netif_set_real_num_tx_queues(net, nvdev->num_chn);
netif_set_real_num_rx_queues(net, nvdev->num_chn);
/* MTU range: 68 - 1500 or 65521 */
net->min_mtu = NETVSC_MTU_MIN;
if (nvdev->nvsp_version >= NVSP_PROTOCOL_VERSION_2)
net->max_mtu = NETVSC_MTU - ETH_HLEN;
else
net->max_mtu = ETH_DATA_LEN;
ret = register_netdev(net);
if (ret != 0) {
pr_err("Unable to register netdev.\n");
......
......@@ -1419,17 +1419,6 @@ static const struct ethtool_ops virtnet_ethtool_ops = {
.set_settings = virtnet_set_settings,
};
#define MIN_MTU 68
#define MAX_MTU 65535
static int virtnet_change_mtu(struct net_device *dev, int new_mtu)
{
if (new_mtu < MIN_MTU || new_mtu > MAX_MTU)
return -EINVAL;
dev->mtu = new_mtu;
return 0;
}
static const struct net_device_ops virtnet_netdev = {
.ndo_open = virtnet_open,
.ndo_stop = virtnet_close,
......@@ -1437,7 +1426,6 @@ static const struct net_device_ops virtnet_netdev = {
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = virtnet_set_mac_address,
.ndo_set_rx_mode = virtnet_set_rx_mode,
.ndo_change_mtu = virtnet_change_mtu,
.ndo_get_stats64 = virtnet_stats,
.ndo_vlan_rx_add_vid = virtnet_vlan_rx_add_vid,
.ndo_vlan_rx_kill_vid = virtnet_vlan_rx_kill_vid,
......@@ -1748,6 +1736,9 @@ static bool virtnet_validate_features(struct virtio_device *vdev)
return true;
}
#define MIN_MTU ETH_MIN_MTU
#define MAX_MTU ETH_MAX_MTU
static int virtnet_probe(struct virtio_device *vdev)
{
int i, err;
......@@ -1821,6 +1812,10 @@ static int virtnet_probe(struct virtio_device *vdev)
dev->vlan_features = dev->features;
/* MTU range: 68 - 65535 */
dev->min_mtu = MIN_MTU;
dev->max_mtu = MAX_MTU;
/* Configuration may specify what MAC to use. Otherwise random. */
if (virtio_has_feature(vdev, VIRTIO_NET_F_MAC))
virtio_cread_bytes(vdev,
......@@ -1875,8 +1870,10 @@ static int virtnet_probe(struct virtio_device *vdev)
mtu = virtio_cread16(vdev,
offsetof(struct virtio_net_config,
mtu));
if (virtnet_change_mtu(dev, mtu))
if (mtu < dev->min_mtu || mtu > dev->max_mtu)
__virtio_clear_bit(vdev, VIRTIO_NET_F_MTU);
else
dev->mtu = mtu;
}
if (vi->any_header_sg)
......
......@@ -2969,9 +2969,6 @@ vmxnet3_change_mtu(struct net_device *netdev, int new_mtu)
struct vmxnet3_adapter *adapter = netdev_priv(netdev);
int err = 0;
if (new_mtu < VMXNET3_MIN_MTU || new_mtu > VMXNET3_MAX_MTU)
return -EINVAL;
netdev->mtu = new_mtu;
/*
......@@ -3428,6 +3425,10 @@ vmxnet3_probe_device(struct pci_dev *pdev,
vmxnet3_set_ethtool_ops(netdev);
netdev->watchdog_timeo = 5 * HZ;
/* MTU range: 60 - 9000 */
netdev->min_mtu = VMXNET3_MIN_MTU;
netdev->max_mtu = VMXNET3_MAX_MTU;
INIT_WORK(&adapter->work, vmxnet3_reset_work);
set_bit(VMXNET3_STATE_BIT_QUIESCED, &adapter->state);
......
......@@ -302,7 +302,7 @@ static int xenvif_close(struct net_device *dev)
static int xenvif_change_mtu(struct net_device *dev, int mtu)
{
struct xenvif *vif = netdev_priv(dev);
int max = vif->can_sg ? 65535 - VLAN_ETH_HLEN : ETH_DATA_LEN;
int max = vif->can_sg ? ETH_MAX_MTU - VLAN_ETH_HLEN : ETH_DATA_LEN;
if (mtu > max)
return -EINVAL;
......@@ -471,6 +471,9 @@ struct xenvif *xenvif_alloc(struct device *parent, domid_t domid,
dev->tx_queue_len = XENVIF_QUEUE_LENGTH;
dev->min_mtu = 0;
dev->max_mtu = ETH_MAX_MTU - VLAN_ETH_HLEN;
/*
* Initialise a dummy MAC address. We choose the numerically
* largest non-broadcast address to prevent the address getting
......
......@@ -1329,6 +1329,8 @@ static struct net_device *xennet_create_dev(struct xenbus_device *dev)
netdev->features |= netdev->hw_features;
netdev->ethtool_ops = &xennet_ethtool_ops;
netdev->min_mtu = 0;
netdev->max_mtu = XEN_NETIF_MAX_TX_SIZE;
SET_NETDEV_DEV(netdev, &dev->dev);
np->netdev = netdev;
......
......@@ -113,12 +113,10 @@ enum net_types {
};
#define ETH_HEADER_SIZE 14 /* size of ethernet header */
#define ETH_MIN_DATA_SIZE 46 /* minimum eth data size */
#define ETH_MIN_PACKET_SIZE (ETH_HEADER_SIZE + ETH_MIN_DATA_SIZE)
#define ETH_MIN_PACKET_SIZE (ETH_HLEN + ETH_MIN_DATA_SIZE)
#define ETH_MAX_MTU 16384 /* maximum data size */
#define VISOR_ETH_MAX_MTU 16384 /* maximum data size */
#ifndef MAX_MACADDR_LEN
#define MAX_MACADDR_LEN 6 /* number of bytes in MAC address */
......@@ -288,7 +286,7 @@ struct net_pkt_xmt {
int len; /* full length of data in the packet */
int num_frags; /* number of fragments in frags containing data */
struct phys_info frags[MAX_PHYS_INFO]; /* physical page information */
char ethhdr[ETH_HEADER_SIZE]; /* the ethernet header */
char ethhdr[ETH_HLEN]; /* the ethernet header */
struct {
/* these are needed for csum at uisnic end */
u8 valid; /* 1 = struct is valid - else ignore */
......@@ -323,7 +321,7 @@ struct net_pkt_xmtdone {
*/
#define RCVPOST_BUF_SIZE 4032
#define MAX_NET_RCV_CHAIN \
((ETH_MAX_MTU + ETH_HEADER_SIZE + RCVPOST_BUF_SIZE - 1) \
((VISOR_ETH_MAX_MTU + ETH_HLEN + RCVPOST_BUF_SIZE - 1) \
/ RCVPOST_BUF_SIZE)
struct net_pkt_rcvpost {
......
......@@ -791,7 +791,7 @@ visornic_xmit(struct sk_buff *skb, struct net_device *netdev)
* pointing to
*/
firstfraglen = skb->len - skb->data_len;
if (firstfraglen < ETH_HEADER_SIZE) {
if (firstfraglen < ETH_HLEN) {
spin_unlock_irqrestore(&devdata->priv_lock, flags);
devdata->busy_cnt++;
dev_err(&netdev->dev,
......@@ -864,7 +864,7 @@ visornic_xmit(struct sk_buff *skb, struct net_device *netdev)
/* copy ethernet header from first frag into ocmdrsp
* - everything else will be pass in frags & DMA'ed
*/
memcpy(cmdrsp->net.xmt.ethhdr, skb->data, ETH_HEADER_SIZE);
memcpy(cmdrsp->net.xmt.ethhdr, skb->data, ETH_HLEN);
/* copy frags info - from skb->data we need to only provide access
* beyond eth header
*/
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment