pinctrl: mlxbf3: Add pinctrl driver support

NVIDIA BlueField-3 SoC has a few pins that can be used as GPIOs
or take the default hardware functionality. Add a driver for
the pin muxing.
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230315215027.30685-3-asmaa@nvidia.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

drivers/pinctrl/Kconfig

@@ -523,6 +523,19 @@ config PINCTRL_ZYNQMP
 	  This driver can also be built as a module. If so, the module
 	  will be called pinctrl-zynqmp.
 
+config PINCTRL_MLXBF3
+	tristate "NVIDIA BlueField-3 SoC Pinctrl driver"
+	depends on (MELLANOX_PLATFORM && ARM64) || COMPILE_TEST
+	select PINMUX
+	select GPIOLIB
+	select GPIOLIB_IRQCHIP
+	select GPIO_MLXBF3
+	help
+	  Say Y to select the pinctrl driver for BlueField-3 SoCs.
+	  This pin controller allows selecting the mux function for
+	  each pin. This driver can also be built as a module called
+	  pinctrl-mlxbf3.
+
 source "drivers/pinctrl/actions/Kconfig"
 source "drivers/pinctrl/aspeed/Kconfig"
 source "drivers/pinctrl/bcm/Kconfig"

drivers/pinctrl/Makefile

@@ -36,6 +36,7 @@ obj-$(CONFIG_PINCTRL_MCP23S08_I2C)	+= pinctrl-mcp23s08_i2c.o
 obj-$(CONFIG_PINCTRL_MCP23S08_SPI)	+= pinctrl-mcp23s08_spi.o
 obj-$(CONFIG_PINCTRL_MCP23S08)	+= pinctrl-mcp23s08.o
 obj-$(CONFIG_PINCTRL_MICROCHIP_SGPIO)	+= pinctrl-microchip-sgpio.o
+obj-$(CONFIG_PINCTRL_MLXBF3)	+= pinctrl-mlxbf3.o
 obj-$(CONFIG_PINCTRL_OCELOT)	+= pinctrl-ocelot.o
 obj-$(CONFIG_PINCTRL_OXNAS)	+= pinctrl-oxnas.o
 obj-$(CONFIG_PINCTRL_PALMAS)	+= pinctrl-palmas.o

drivers/pinctrl/pinctrl-mlxbf3.c

+// SPDX-License-Identifier: GPL-2.0-only or BSD-3-Clause
+/* Copyright (C) 2022 NVIDIA CORPORATION & AFFILIATES */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+
+#define MLXBF3_NGPIOS_GPIO0    32
+#define MLXBF3_MAX_GPIO_PINS   56
+
+enum {
+	MLXBF3_GPIO_HW_MODE,
+	MLXBF3_GPIO_SW_MODE,
+};
+
+struct mlxbf3_pinctrl {
+	void __iomem *fw_ctrl_set0;
+	void __iomem *fw_ctrl_clr0;
+	void __iomem *fw_ctrl_set1;
+	void __iomem *fw_ctrl_clr1;
+	struct device *dev;
+	struct pinctrl_dev *pctl;
+	struct pinctrl_gpio_range gpio_range;
+};
+
+#define MLXBF3_GPIO_RANGE(_id, _pinbase, _gpiobase, _npins)	\
+	{							\
+		.name = "mlxbf3_gpio_range",			\
+		.id = _id,					\
+		.base = _gpiobase,				\
+		.pin_base = _pinbase,				\
+		.npins = _npins,				\
+	}
+
+static struct pinctrl_gpio_range mlxbf3_pinctrl_gpio_ranges[] = {
+	MLXBF3_GPIO_RANGE(0, 0,  480, 32),
+	MLXBF3_GPIO_RANGE(1,  32, 456, 24),
+};
+
+static const struct pinctrl_pin_desc mlxbf3_pins[] = {
+	PINCTRL_PIN(0, "gpio0"),
+	PINCTRL_PIN(1, "gpio1"),
+	PINCTRL_PIN(2, "gpio2"),
+	PINCTRL_PIN(3, "gpio3"),
+	PINCTRL_PIN(4, "gpio4"),
+	PINCTRL_PIN(5, "gpio5"),
+	PINCTRL_PIN(6, "gpio6"),
+	PINCTRL_PIN(7, "gpio7"),
+	PINCTRL_PIN(8, "gpio8"),
+	PINCTRL_PIN(9, "gpio9"),
+	PINCTRL_PIN(10, "gpio10"),
+	PINCTRL_PIN(11, "gpio11"),
+	PINCTRL_PIN(12, "gpio12"),
+	PINCTRL_PIN(13, "gpio13"),
+	PINCTRL_PIN(14, "gpio14"),
+	PINCTRL_PIN(15, "gpio15"),
+	PINCTRL_PIN(16, "gpio16"),
+	PINCTRL_PIN(17, "gpio17"),
+	PINCTRL_PIN(18, "gpio18"),
+	PINCTRL_PIN(19, "gpio19"),
+	PINCTRL_PIN(20, "gpio20"),
+	PINCTRL_PIN(21, "gpio21"),
+	PINCTRL_PIN(22, "gpio22"),
+	PINCTRL_PIN(23, "gpio23"),
+	PINCTRL_PIN(24, "gpio24"),
+	PINCTRL_PIN(25, "gpio25"),
+	PINCTRL_PIN(26, "gpio26"),
+	PINCTRL_PIN(27, "gpio27"),
+	PINCTRL_PIN(28, "gpio28"),
+	PINCTRL_PIN(29, "gpio29"),
+	PINCTRL_PIN(30, "gpio30"),
+	PINCTRL_PIN(31, "gpio31"),
+	PINCTRL_PIN(32, "gpio32"),
+	PINCTRL_PIN(33, "gpio33"),
+	PINCTRL_PIN(34, "gpio34"),
+	PINCTRL_PIN(35, "gpio35"),
+	PINCTRL_PIN(36, "gpio36"),
+	PINCTRL_PIN(37, "gpio37"),
+	PINCTRL_PIN(38, "gpio38"),
+	PINCTRL_PIN(39, "gpio39"),
+	PINCTRL_PIN(40, "gpio40"),
+	PINCTRL_PIN(41, "gpio41"),
+	PINCTRL_PIN(42, "gpio42"),
+	PINCTRL_PIN(43, "gpio43"),
+	PINCTRL_PIN(44, "gpio44"),
+	PINCTRL_PIN(45, "gpio45"),
+	PINCTRL_PIN(46, "gpio46"),
+	PINCTRL_PIN(47, "gpio47"),
+	PINCTRL_PIN(48, "gpio48"),
+	PINCTRL_PIN(49, "gpio49"),
+	PINCTRL_PIN(50, "gpio50"),
+	PINCTRL_PIN(51, "gpio51"),
+	PINCTRL_PIN(52, "gpio52"),
+	PINCTRL_PIN(53, "gpio53"),
+	PINCTRL_PIN(54, "gpio54"),
+	PINCTRL_PIN(55, "gpio55"),
+};
+
+/*
+ * All single-pin functions can be mapped to any GPIO, however pinmux applies
+ * functions to pin groups and only those groups declared as supporting that
+ * function. To make this work we must put each pin in its own dummy group so
+ * that the functions can be described as applying to all pins.
+ * We use the same name as in the datasheet.
+ */
+static const char * const mlxbf3_pinctrl_single_group_names[] = {
+	"gpio0", "gpio1",  "gpio2",  "gpio3",  "gpio4",  "gpio5",  "gpio6", "gpio7",
+	"gpio8",  "gpio9",  "gpio10", "gpio11", "gpio12", "gpio13", "gpio14", "gpio15",
+	"gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21", "gpio22", "gpio23",
+	"gpio24", "gpio25", "gpio26", "gpio27", "gpio28", "gpio29", "gpio30", "gpio31",
+	"gpio32", "gpio33", "gpio34", "gpio35", "gpio36", "gpio37", "gpio38", "gpio39",
+	"gpio40", "gpio41", "gpio42", "gpio43", "gpio44", "gpio45", "gpio46", "gpio47",
+	"gpio48", "gpio49", "gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55",
+};
+
+static int mlxbf3_get_groups_count(struct pinctrl_dev *pctldev)
+{
+	/* Number single-pin groups */
+	return MLXBF3_MAX_GPIO_PINS;
+}
+
+static const char *mlxbf3_get_group_name(struct pinctrl_dev *pctldev,
+					 unsigned int selector)
+{
+	return mlxbf3_pinctrl_single_group_names[selector];
+}
+
+static int mlxbf3_get_group_pins(struct pinctrl_dev *pctldev,
+				 unsigned int selector,
+				 const unsigned int **pins,
+				 unsigned int *num_pins)
+{
+	/* return the dummy group for a single pin */
+	*pins = &selector;
+	*num_pins = 1;
+
+	return 0;
+}
+
+static const struct pinctrl_ops mlxbf3_pinctrl_group_ops = {
+	.get_groups_count = mlxbf3_get_groups_count,
+	.get_group_name = mlxbf3_get_group_name,
+	.get_group_pins = mlxbf3_get_group_pins,
+};
+
+/*
+ * Only 2 functions are supported and they apply to all pins:
+ * 1) Default hardware functionality
+ * 2) Software controlled GPIO
+ */
+static const char * const mlxbf3_gpiofunc_group_names[] = { "swctrl" };
+static const char * const mlxbf3_hwfunc_group_names[]   = { "hwctrl" };
+
+struct pinfunction mlxbf3_pmx_funcs[] = {
+	PINCTRL_PINFUNCTION("hwfunc", mlxbf3_hwfunc_group_names, 1),
+	PINCTRL_PINFUNCTION("gpiofunc", mlxbf3_gpiofunc_group_names, 1),
+};
+
+static int mlxbf3_pmx_get_funcs_count(struct pinctrl_dev *pctldev)
+{
+	return ARRAY_SIZE(mlxbf3_pmx_funcs);
+}
+
+static const char *mlxbf3_pmx_get_func_name(struct pinctrl_dev *pctldev,
+					   unsigned int selector)
+{
+	return mlxbf3_pmx_funcs[selector].name;
+}
+
+static int mlxbf3_pmx_get_groups(struct pinctrl_dev *pctldev,
+				 unsigned int selector,
+				 const char * const **groups,
+				 unsigned int * const num_groups)
+{
+	*groups = mlxbf3_pmx_funcs[selector].groups;
+	*num_groups = MLXBF3_MAX_GPIO_PINS;
+
+	return 0;
+}
+
+static int mlxbf3_pmx_set(struct pinctrl_dev *pctldev,
+			      unsigned int selector,
+			      unsigned int group)
+{
+	struct mlxbf3_pinctrl *priv = pinctrl_dev_get_drvdata(pctldev);
+
+	if (selector == MLXBF3_GPIO_HW_MODE) {
+		if (group < MLXBF3_NGPIOS_GPIO0)
+			writel(BIT(group), priv->fw_ctrl_clr0);
+		else
+			writel(BIT(group % MLXBF3_NGPIOS_GPIO0), priv->fw_ctrl_clr1);
+	}
+
+	if (selector == MLXBF3_GPIO_SW_MODE) {
+		if (group < MLXBF3_NGPIOS_GPIO0)
+			writel(BIT(group), priv->fw_ctrl_set0);
+		else
+			writel(BIT(group % MLXBF3_NGPIOS_GPIO0), priv->fw_ctrl_set1);
+	}
+
+	return 0;
+}
+
+static int mlxbf3_gpio_request_enable(struct pinctrl_dev *pctldev,
+				     struct pinctrl_gpio_range *range,
+				     unsigned int offset)
+{
+	struct mlxbf3_pinctrl *priv = pinctrl_dev_get_drvdata(pctldev);
+
+	if (offset < MLXBF3_NGPIOS_GPIO0)
+		writel(BIT(offset), priv->fw_ctrl_set0);
+	else
+		writel(BIT(offset % MLXBF3_NGPIOS_GPIO0), priv->fw_ctrl_set1);
+
+	return 0;
+}
+
+static void mlxbf3_gpio_disable_free(struct pinctrl_dev *pctldev,
+				    struct pinctrl_gpio_range *range,
+				    unsigned int offset)
+{
+	struct mlxbf3_pinctrl *priv = pinctrl_dev_get_drvdata(pctldev);
+
+	/* disable GPIO functionality by giving control back to hardware */
+	if (offset < MLXBF3_NGPIOS_GPIO0)
+		writel(BIT(offset), priv->fw_ctrl_clr0);
+	else
+		writel(BIT(offset % MLXBF3_NGPIOS_GPIO0), priv->fw_ctrl_clr1);
+}
+
+static const struct pinmux_ops mlxbf3_pmx_ops = {
+	.get_functions_count = mlxbf3_pmx_get_funcs_count,
+	.get_function_name = mlxbf3_pmx_get_func_name,
+	.get_function_groups = mlxbf3_pmx_get_groups,
+	.set_mux = mlxbf3_pmx_set,
+	.gpio_request_enable = mlxbf3_gpio_request_enable,
+	.gpio_disable_free = mlxbf3_gpio_disable_free,
+};
+
+static struct pinctrl_desc mlxbf3_pin_desc = {
+	.name = "pinctrl-mlxbf3",
+	.pins = mlxbf3_pins,
+	.npins = ARRAY_SIZE(mlxbf3_pins),
+	.pctlops = &mlxbf3_pinctrl_group_ops,
+	.pmxops = &mlxbf3_pmx_ops,
+	.owner = THIS_MODULE,
+};
+
+static_assert(ARRAY_SIZE(mlxbf3_pinctrl_single_group_names) == MLXBF3_MAX_GPIO_PINS);
+
+static int mlxbf3_pinctrl_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct mlxbf3_pinctrl *priv;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = &pdev->dev;
+
+	priv->fw_ctrl_set0 = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->fw_ctrl_set0))
+		return PTR_ERR(priv->fw_ctrl_set0);
+
+	priv->fw_ctrl_clr0 = devm_platform_ioremap_resource(pdev, 1);
+	if (IS_ERR(priv->fw_ctrl_set0))
+		return PTR_ERR(priv->fw_ctrl_set0);
+
+	priv->fw_ctrl_set1 = devm_platform_ioremap_resource(pdev, 2);
+	if (IS_ERR(priv->fw_ctrl_set0))
+		return PTR_ERR(priv->fw_ctrl_set0);
+
+	priv->fw_ctrl_clr1 = devm_platform_ioremap_resource(pdev, 3);
+	if (IS_ERR(priv->fw_ctrl_set0))
+		return PTR_ERR(priv->fw_ctrl_set0);
+
+	ret = devm_pinctrl_register_and_init(dev,
+					     &mlxbf3_pin_desc,
+					     priv,
+					     &priv->pctl);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to register pinctrl\n");
+
+	ret = pinctrl_enable(priv->pctl);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to enable pinctrl\n");
+
+	pinctrl_add_gpio_ranges(priv->pctl, mlxbf3_pinctrl_gpio_ranges, 2);
+
+	return 0;
+}
+
+static const struct acpi_device_id mlxbf3_pinctrl_acpi_ids[] = {
+	{ "MLNXBF34", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(acpi, mlxbf3_pinctrl_acpi_ids);
+
+static struct platform_driver mlxbf3_pinctrl_driver = {
+	.driver = {
+		.name = "pinctrl-mlxbf3",
+		.acpi_match_table = mlxbf3_pinctrl_acpi_ids,
+	},
+	.probe = mlxbf3_pinctrl_probe,
+};
+module_platform_driver(mlxbf3_pinctrl_driver);
+
+MODULE_DESCRIPTION("NVIDIA pinctrl driver");
+MODULE_AUTHOR("Asmaa Mnebhi <asmaa@nvidia.com>");
+MODULE_LICENSE("Dual BSD/GPL");