Commit d1325cf4 authored by Jonathan Cameron's avatar Jonathan Cameron Committed by Greg Kroah-Hartman

Staging: IIO: max1363 ADC driver

Core support for MAX1361, MAX1362, MAX1363, MAX1364,
MAX1136, MAX1137, MAX1138, MAX1139, MAX1236, MAX1237,
MAX1238, MAX1239.

Ring buffer support later in series.
Signed-off-by: default avatarJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 847ec80b
No related merge requests found
...@@ -9,3 +9,8 @@ menuconfig IIO ...@@ -9,3 +9,8 @@ menuconfig IIO
drivers for many different types of embedded sensors using a drivers for many different types of embedded sensors using a
number of different physical interfaces (i2c, spi etc). See number of different physical interfaces (i2c, spi etc). See
Documentation/industrialio for more information. Documentation/industrialio for more information.
if IIO
source "drivers/staging/iio/adc/Kconfig"
endif # IIO
...@@ -4,3 +4,5 @@ ...@@ -4,3 +4,5 @@
obj-$(CONFIG_IIO) += industrialio.o obj-$(CONFIG_IIO) += industrialio.o
industrialio-y := industrialio-core.o industrialio-y := industrialio-core.o
obj-y += adc/
\ No newline at end of file
#
# ADC drivers
#
comment "Analog to digital convertors"
config MAX1363
tristate "MAXIM max1363 ADC driver"
depends on I2C
help
Say yes here to build support for many MAXIM i2c analog to digital
convertors (ADC). (max1361, max1362, max1363, max1364, max1136,
max1136, max1137, max1138, max1139, max1236, max1237, max11238,
max1239) Provides direct access via sysfs.
# Makefile for industrial I/O ADC drivers
#
max1363-y := max1363_core.o
obj-$(CONFIG_MAX1363) += max1363.o
#ifndef _MAX1363_H_
#define _MAX1363_H_
#define MAX1363_SETUP_BYTE(a) ((a) | 0x80)
/* There is a fair bit more defined here than currently
* used, but the intention is to support everything these
* chips do in the long run */
/* see data sheets */
/* max1363 and max1236, max1237, max1238, max1239 */
#define MAX1363_SETUP_AIN3_IS_AIN3_REF_IS_VDD 0x00
#define MAX1363_SETUP_AIN3_IS_REF_EXT_TO_REF 0x20
#define MAX1363_SETUP_AIN3_IS_AIN3_REF_IS_INT 0x40
#define MAX1363_SETUP_AIN3_IS_REF_REF_IS_INT 0x60
#define MAX1363_SETUP_POWER_UP_INT_REF 0x10
#define MAX1363_SETUP_POWER_DOWN_INT_REF 0x00
/* think about includeing max11600 etc - more settings */
#define MAX1363_SETUP_EXT_CLOCK 0x08
#define MAX1363_SETUP_INT_CLOCK 0x00
#define MAX1363_SETUP_UNIPOLAR 0x00
#define MAX1363_SETUP_BIPOLAR 0x04
#define MAX1363_SETUP_RESET 0x00
#define MAX1363_SETUP_NORESET 0x02
/* max1363 only - though don't care on others.
* For now monitor modes are not implemented as the relevant
* line is not connected on my test board.
* The definitions are here as I intend to add this soon.
*/
#define MAX1363_SETUP_MONITOR_SETUP 0x01
/* Specific to the max1363 */
#define MAX1363_MON_RESET_CHAN(a) (1 << ((a) + 4))
#define MAX1363_MON_CONV_RATE_133ksps 0
#define MAX1363_MON_CONV_RATE_66_5ksps 0x02
#define MAX1363_MON_CONV_RATE_33_3ksps 0x04
#define MAX1363_MON_CONV_RATE_16_6ksps 0x06
#define MAX1363_MON_CONV_RATE_8_3ksps 0x08
#define MAX1363_MON_CONV_RATE_4_2ksps 0x0A
#define MAX1363_MON_CONV_RATE_2_0ksps 0x0C
#define MAX1363_MON_CONV_RATE_1_0ksps 0x0E
#define MAX1363_MON_INT_ENABLE 0x01
/* defined for readability reasons */
/* All chips */
#define MAX1363_CONFIG_BYTE(a) ((a))
#define MAX1363_CONFIG_SE 0x01
#define MAX1363_CONFIG_DE 0x00
#define MAX1363_CONFIG_SCAN_TO_CS 0x00
#define MAX1363_CONFIG_SCAN_SINGLE_8 0x20
#define MAX1363_CONFIG_SCAN_MONITOR_MODE 0x40
#define MAX1363_CONFIG_SCAN_SINGLE_1 0x60
/* max123{6-9} only */
#define MAX1236_SCAN_MID_TO_CHANNEL 0x40
/* max1363 only - merely part of channel selects or don't care for others*/
#define MAX1363_CONFIG_EN_MON_MODE_READ 0x18
#define MAX1363_CHANNEL_SEL(a) ((a) << 1)
/* max1363 strictly 0x06 - but doesn't matter */
#define MAX1363_CHANNEL_SEL_MASK 0x1E
#define MAX1363_SCAN_MASK 0x60
#define MAX1363_SE_DE_MASK 0x01
/**
* struct max1363_mode - scan mode information
* @name: Name used to identify the scan mode.
* @conf: The corresponding value of the configuration register
* @numvals: The number of values returned by a single scan
*/
struct max1363_mode {
const char *name;
int8_t conf;
int numvals;
};
#define MAX1363_MODE_SINGLE(_num) { \
.name = #_num, \
.conf = MAX1363_CHANNEL_SEL(_num) \
| MAX1363_CONFIG_SCAN_SINGLE_1 \
| MAX1363_CONFIG_SE, \
.numvals = 1, \
}
#define MAX1363_MODE_SINGLE_TIMES_8(_num) { \
.name = #_num"x8", \
.conf = MAX1363_CHANNEL_SEL(_num) \
| MAX1363_CONFIG_SCAN_SINGLE_8 \
| MAX1363_CONFIG_SE, \
.numvals = 8, \
}
#define MAX1363_MODE_SCAN_TO_CHANNEL(_num) { \
.name = "0..."#_num, \
.conf = MAX1363_CHANNEL_SEL(_num) \
| MAX1363_CONFIG_SCAN_TO_CS \
| MAX1363_CONFIG_SE, \
.numvals = _num + 1, \
}
/* note not available for max1363 hence naming */
#define MAX1236_MODE_SCAN_MID_TO_CHANNEL(_mid, _num) { \
.name = #_mid"..."#_num, \
.conf = MAX1363_CHANNEL_SEL(_num) \
| MAX1236_SCAN_MID_TO_CHANNEL \
| MAX1363_CONFIG_SE, \
.numvals = _num - _mid + 1 \
}
#define MAX1363_MODE_DIFF_SINGLE(_nump, _numm) { \
.name = #_nump"-"#_numm, \
.conf = MAX1363_CHANNEL_SEL(_nump) \
| MAX1363_CONFIG_SCAN_SINGLE_1 \
| MAX1363_CONFIG_DE, \
.numvals = 1, \
}
#define MAX1363_MODE_DIFF_SINGLE_TIMES_8(_nump, _numm) { \
.name = #_nump"-"#_numm, \
.conf = MAX1363_CHANNEL_SEL(_nump) \
| MAX1363_CONFIG_SCAN_SINGLE_8 \
| MAX1363_CONFIG_DE, \
.numvals = 1, \
}
/* Can't think how to automate naming so specify for now */
#define MAX1363_MODE_DIFF_SCAN_TO_CHANNEL_NAMED(_name, _num, _numvals) { \
.name = #_name, \
.conf = MAX1363_CHANNEL_SEL(_num) \
| MAX1363_CONFIG_SCAN_TO_CS \
| MAX1363_CONFIG_DE, \
.numvals = _numvals, \
}
/* note only available for max1363 hence naming */
#define MAX1236_MODE_DIFF_SCAN_MID_TO_CHANNEL_NAMED(_name, _num, _numvals) { \
.name = #_name, \
.conf = MAX1363_CHANNEL_SEL(_num) \
| MAX1236_SCAN_MID_TO_CHANNEL \
| MAX1363_CONFIG_SE, \
.numvals = _numvals, \
}
/* Not currently handled */
#define MAX1363_MODE_MONITOR { \
.name = "monitor", \
.conf = MAX1363_CHANNEL_SEL(3) \
| MAX1363_CONFIG_SCAN_MONITOR_MODE \
| MAX1363_CONFIG_SE, \
.numvals = 10, \
}
/* This may seem an overly long winded way to do this, but at least it makes
* clear what all the various options actually do. Alternative suggestions
* that don't require user to have intimate knowledge of the chip welcomed.
*/
/* This must be maintained along side the max1363_mode_table in max1363_core */
enum max1363_modes {
/* Single read of a single channel */
_s0, _s1, _s2, _s3, _s4, _s5, _s6, _s7, _s8, _s9, _s10, _s11,
/* Eight reads of a single channel */
se0, se1, se2, se3, se4, se5, se6, se7, se8, se9, se10, se11,
/* Scan to channel */
s0to1, s0to2, s0to3, s0to4, s0to5, s0to6,
s0to7, s0to8, s0to9, s0to10, s0to11,
/* Differential single read */
d0m1, d2m3, d4m5, d6m7, d8m9, d10m11,
d1m0, d3m2, d5m4, d7m6, d9m8, d11m10,
/* Differential single read 8 times */
de0m1, de2m3, de4m5, de6m7, de8m9, de10m11,
de1m0, de3m2, de5m4, de7m6, de9m8, de11m10,
/* Differential scan to channel */
d0m1to2m3, d0m1to4m5, d0m1to6m7, d0m1to8m9, d0m1to10m11,
d1m0to3m2, d1m0to5m4, d1m0to7m6, d1m0to9m8, d1m0to11m10,
/* Scan mid to channel max123{6-9} only */
s2to3, s6to7, s6to8, s6to9, s6to10, s6to11,
/* Differential scan mid to channel */
s6m7to8m9, s6m7to10m11, s7m6to9m8, s7m6to11m10,
};
/**
* struct max1363_chip_info - chip specifc information
* @name: indentification string for chip
* @num_inputs: number of physical inputs on chip
* @int_vref_mv: the internal reference voltage
* @monitor_mode: whether the chip supports monitor interrupts
* @mode_list: array of available scan modes
* @num_modes: the number of scan modes available
* @default_mode: the scan mode in which the chip starts up
*/
struct max1363_chip_info {
const char *name;
u8 num_inputs;
u16 int_vref_mv;
bool monitor_mode;
const enum max1363_modes *mode_list;
int num_modes;
enum max1363_modes default_mode;
};
/**
* struct max1363_state - driver instance specific data
* @indio_dev: the industrial I/O device
* @client: i2c_client
* @setupbyte: cache of current device setup byte
* @configbyte: cache of current device config byte
* @chip_info: chip model specific constants, available modes etc
* @current_mode: the scan mode of this chip
* @poll_work: bottom half of polling interrupt handler
* @protect_ring: used to ensure only one polling bh running at a time
* @reg: supply regulator
*/
struct max1363_state {
struct iio_dev *indio_dev;
struct i2c_client *client;
char setupbyte;
char configbyte;
const struct max1363_chip_info *chip_info;
const struct max1363_mode *current_mode;
struct work_struct poll_work;
atomic_t protect_ring;
struct iio_trigger *trig;
struct regulator *reg;
};
static inline void max1363_uninitialize_ring(struct iio_ring_buffer *ring)
{
};
static inline int max1363_initialize_ring(struct iio_ring_buffer *ring)
{
return 0;
};
static inline ssize_t max1363_scan_from_ring(struct device *dev,
struct device_attribute *attr,
char *buf)
{
return 0;
};
static inline int
max1363_register_ring_funcs_and_init(struct iio_dev *indio_dev)
{
return 0;
};
static inline void max1363_ring_cleanup(struct iio_dev *indio_dev) {};
#endif /* _MAX1363_H_ */
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment