i.MX35: Add USB control register access support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Daniel Mack <daniel@caiaq.de>

arch/arm/plat-mxc/ehci.c

@@ -38,6 +38,18 @@
 #define MX31_H1_PM_BIT		(1 << 8)
 #define MX31_H1_DT_BIT		(1 << 4)
 
+#define MX35_OTG_SIC_SHIFT	29
+#define MX35_OTG_SIC_MASK	(0x3 << MX35_OTG_SIC_SHIFT)
+#define MX35_OTG_PM_BIT		(1 << 24)
+
+#define MX35_H1_SIC_SHIFT	21
+#define MX35_H1_SIC_MASK	(0x3 << MX35_H1_SIC_SHIFT)
+#define MX35_H1_PM_BIT		(1 << 8)
+#define MX35_H1_IPPUE_UP_BIT	(1 << 7)
+#define MX35_H1_IPPUE_DOWN_BIT	(1 << 6)
+#define MX35_H1_TLL_BIT		(1 << 5)
+#define MX35_H1_USBTE_BIT	(1 << 4)
+
 int mxc_set_usbcontrol(int port, unsigned int flags)
 {
 	unsigned int v;
@@ -85,6 +97,49 @@ int mxc_set_usbcontrol(int port, unsigned int flags)
 				     USBCTRL_OTGBASE_OFFSET));
 		return 0;
 	}
+
+	if (cpu_is_mx35()) {
+		v = readl(MX35_IO_ADDRESS(MX35_OTG_BASE_ADDR +
+				     USBCTRL_OTGBASE_OFFSET));
+
+		switch (port) {
+		case 0:	/* OTG port */
+			v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT);
+			v |= (flags & MXC_EHCI_INTERFACE_MASK)
+					<< MX35_OTG_SIC_SHIFT;
+			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+				v |= MX35_OTG_PM_BIT;
+
+			break;
+		case 1: /* H1 port */
+			v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT |
+				MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT);
+			v |= (flags & MXC_EHCI_INTERFACE_MASK)
+						<< MX35_H1_SIC_SHIFT;
+			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+				v |= MX35_H1_PM_BIT;
+
+			if (!(flags & MXC_EHCI_TTL_ENABLED))
+				v |= MX35_H1_TLL_BIT;
+
+			if (flags & MXC_EHCI_INTERNAL_PHY)
+				v |= MX35_H1_USBTE_BIT;
+
+			if (flags & MXC_EHCI_IPPUE_DOWN)
+				v |= MX35_H1_IPPUE_DOWN_BIT;
+
+			if (flags & MXC_EHCI_IPPUE_UP)
+				v |= MX35_H1_IPPUE_UP_BIT;
+
+			break;
+		default:
+			return -EINVAL;
+		}
+
+		writel(v, MX35_IO_ADDRESS(MX35_OTG_BASE_ADDR +
+				     USBCTRL_OTGBASE_OFFSET));
+		return 0;
+	}
 #endif /* CONFIG_ARCH_MX3 */
 #ifdef CONFIG_MACH_MX27
 	if (cpu_is_mx27()) {

arch/arm/plat-mxc/include/mach/mxc_ehci.h

@@ -22,6 +22,10 @@
 #define MXC_EHCI_POWER_PINS_ENABLED	(1 << 5)
 #define MXC_EHCI_TTL_ENABLED		(1 << 6)
 
+#define MXC_EHCI_INTERNAL_PHY		(1 << 7)
+#define MXC_EHCI_IPPUE_DOWN		(1 << 8)
+#define MXC_EHCI_IPPUE_UP		(1 << 9)
+
 struct mxc_usbh_platform_data {
 	int (*init)(struct platform_device *pdev);
 	int (*exit)(struct platform_device *pdev);