Commit d196a949 authored by Alexey Dobriyan's avatar Alexey Dobriyan Committed by Linus Torvalds

proc tty: switch serial_core to ->proc_fops

Signed-off-by: default avatarAlexey Dobriyan <adobriyan@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 201a50ba
......@@ -27,6 +27,8 @@
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/serial_core.h>
#include <linux/smp_lock.h>
#include <linux/device.h>
......@@ -1682,20 +1684,20 @@ static const char *uart_type(struct uart_port *port)
#ifdef CONFIG_PROC_FS
static int uart_line_info(char *buf, struct uart_driver *drv, int i)
static void uart_line_info(struct seq_file *m, struct uart_driver *drv, int i)
{
struct uart_state *state = drv->state + i;
int pm_state;
struct uart_port *port = state->port;
char stat_buf[32];
unsigned int status;
int mmio, ret;
int mmio;
if (!port)
return 0;
return;
mmio = port->iotype >= UPIO_MEM;
ret = sprintf(buf, "%d: uart:%s %s%08llX irq:%d",
seq_printf(m, "%d: uart:%s %s%08llX irq:%d",
port->line, uart_type(port),
mmio ? "mmio:0x" : "port:",
mmio ? (unsigned long long)port->mapbase
......@@ -1703,8 +1705,8 @@ static int uart_line_info(char *buf, struct uart_driver *drv, int i)
port->irq);
if (port->type == PORT_UNKNOWN) {
strcat(buf, "\n");
return ret + 1;
seq_putc(m, '\n');
return;
}
if (capable(CAP_SYS_ADMIN)) {
......@@ -1719,19 +1721,19 @@ static int uart_line_info(char *buf, struct uart_driver *drv, int i)
uart_change_pm(state, pm_state);
mutex_unlock(&state->mutex);
ret += sprintf(buf + ret, " tx:%d rx:%d",
seq_printf(m, " tx:%d rx:%d",
port->icount.tx, port->icount.rx);
if (port->icount.frame)
ret += sprintf(buf + ret, " fe:%d",
seq_printf(m, " fe:%d",
port->icount.frame);
if (port->icount.parity)
ret += sprintf(buf + ret, " pe:%d",
seq_printf(m, " pe:%d",
port->icount.parity);
if (port->icount.brk)
ret += sprintf(buf + ret, " brk:%d",
seq_printf(m, " brk:%d",
port->icount.brk);
if (port->icount.overrun)
ret += sprintf(buf + ret, " oe:%d",
seq_printf(m, " oe:%d",
port->icount.overrun);
#define INFOBIT(bit, str) \
......@@ -1753,45 +1755,39 @@ static int uart_line_info(char *buf, struct uart_driver *drv, int i)
STATBIT(TIOCM_RNG, "|RI");
if (stat_buf[0])
stat_buf[0] = ' ';
strcat(stat_buf, "\n");
ret += sprintf(buf + ret, stat_buf);
} else {
strcat(buf, "\n");
ret++;
seq_puts(m, stat_buf);
}
seq_putc(m, '\n');
#undef STATBIT
#undef INFOBIT
return ret;
}
static int uart_read_proc(char *page, char **start, off_t off,
int count, int *eof, void *data)
static int uart_proc_show(struct seq_file *m, void *v)
{
struct tty_driver *ttydrv = data;
struct tty_driver *ttydrv = v;
struct uart_driver *drv = ttydrv->driver_state;
int i, len = 0, l;
off_t begin = 0;
int i;
len += sprintf(page, "serinfo:1.0 driver%s%s revision:%s\n",
seq_printf(m, "serinfo:1.0 driver%s%s revision:%s\n",
"", "", "");
for (i = 0; i < drv->nr && len < PAGE_SIZE - 96; i++) {
l = uart_line_info(page + len, drv, i);
len += l;
if (len + begin > off + count)
goto done;
if (len + begin < off) {
begin += len;
len = 0;
}
}
*eof = 1;
done:
if (off >= len + begin)
return 0;
*start = page + (off - begin);
return (count < begin + len - off) ? count : (begin + len - off);
for (i = 0; i < drv->nr; i++)
uart_line_info(m, drv, i);
return 0;
}
static int uart_proc_open(struct inode *inode, struct file *file)
{
return single_open(file, uart_proc_show, PDE(inode)->data);
}
static const struct file_operations uart_proc_fops = {
.owner = THIS_MODULE,
.open = uart_proc_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
#endif
#if defined(CONFIG_SERIAL_CORE_CONSOLE) || defined(CONFIG_CONSOLE_POLL)
......@@ -2299,7 +2295,7 @@ static const struct tty_operations uart_ops = {
.break_ctl = uart_break_ctl,
.wait_until_sent= uart_wait_until_sent,
#ifdef CONFIG_PROC_FS
.read_proc = uart_read_proc,
.proc_fops = &uart_proc_fops,
#endif
.tiocmget = uart_tiocmget,
.tiocmset = uart_tiocmset,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment