V4L/DVB (6150): Add CX23885/CX23887 PCIe bridge driver

This is a new framework to support boards based on the CX23885/7 PCIe
bridge. The framework supports digital (no analog yet)
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

drivers/media/video/Makefile

@@ -124,5 +124,6 @@ obj-$(CONFIG_USB_QUICKCAM_MESSENGER)	+= usbvideo/
 obj-$(CONFIG_VIDEO_IVTV) += ivtv/
 
 obj-$(CONFIG_VIDEO_VIVI) += vivi.o
+obj-$(CONFIG_VIDEO_CX23885) += cx23885/
 
 EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core

drivers/media/video/cx23885/Kconfig

+config VIDEO_CX23885
+	tristate "Conexant cx23885 (2388x successor) support"
+	depends on VIDEO_DEV && PCI && I2C
+	select I2C_ALGOBIT
+	select FW_LOADER
+	select VIDEO_BTCX
+	select VIDEO_BUF
+	select VIDEO_TUNER
+	select VIDEO_TVEEPROM
+	select VIDEO_IR
+	---help---
+	  This is a video4linux driver for Conexant 23885 based
+	  TV cards.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cx23885
+

drivers/media/video/cx23885/Makefile

+cx23885-objs	:= cx23885-cards.o cx23885-core.o cx23885-i2c.o cx23885-dvb.o
+
+obj-$(CONFIG_VIDEO_CX23885) += cx23885.o
+
+EXTRA_CFLAGS += -Idrivers/media/video
+EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
+EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
+
+EXTRA_CFLAGS += $(extra-cflags-y) $(extra-cflags-m)

drivers/media/video/cx23885/cx23885-cards.c

+/*
+ *  Driver for the Conexant CX23885 PCIe bridge
+ *
+ *  Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+#include "cx23885.h"
+
+/* ------------------------------------------------------------------ */
+/* board config info                                                  */
+
+struct cx23885_board cx23885_boards[] = {
+	[CX23885_BOARD_UNKNOWN] = {
+		.name		= "UNKNOWN/GENERIC",
+		.bridge		= CX23885_BRIDGE_UNDEFINED,
+		.input          = {{
+			.type   = CX23885_VMUX_COMPOSITE1,
+			.vmux   = 0,
+		},{
+			.type   = CX23885_VMUX_COMPOSITE2,
+			.vmux   = 1,
+		},{
+			.type   = CX23885_VMUX_COMPOSITE3,
+			.vmux   = 2,
+		},{
+			.type   = CX23885_VMUX_COMPOSITE4,
+			.vmux   = 3,
+		}},
+	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1800lp] = {
+		.name		= "Hauppauge WinTV-HVR1800lp",
+		.bridge		= CX23885_BRIDGE_885,
+		.portc		= CX23885_MPEG_DVB,
+		.input          = {{
+			.type   = CX23885_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0xff00,
+		},{
+			.type   = CX23885_VMUX_DEBUG,
+			.vmux   = 0,
+			.gpio0  = 0xff01,
+		},{
+			.type   = CX23885_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0xff02,
+		},{
+			.type   = CX23885_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0xff02,
+		}},
+	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1800] = {
+		.name		= "Hauppauge WinTV-HVR1800",
+		.bridge		= CX23885_BRIDGE_887,
+		.portc		= CX23885_MPEG_DVB,
+		.input          = {{
+			.type   = CX23885_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0xff00,
+		},{
+			.type   = CX23885_VMUX_DEBUG,
+			.vmux   = 0,
+			.gpio0  = 0xff01,
+		},{
+			.type   = CX23885_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0xff02,
+		},{
+			.type   = CX23885_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0xff02,
+		}},
+	},
+};
+const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
+
+/* ------------------------------------------------------------------ */
+/* PCI subsystem IDs                                                  */
+
+struct cx23885_subid cx23885_subids[] = {
+	{
+		.subvendor = 0x0070,
+		.subdevice = 0x3400,
+		.card      = CX23885_BOARD_UNKNOWN,
+	},{
+		.subvendor = 0x0070,
+		.subdevice = 0x7600,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1800lp,
+	},{
+		.subvendor = 0x0070,
+		.subdevice = 0x7800,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1800,
+	},{
+		.subvendor = 0x0070,
+		.subdevice = 0x7801,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1800,
+	},
+};
+const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
+
+void cx23885_card_list(struct cx23885_dev *dev)
+{
+	int i;
+
+	if (0 == dev->pci->subsystem_vendor &&
+	    0 == dev->pci->subsystem_device) {
+		printk("%s: Your board has no valid PCIe Subsystem ID and thus can't\n"
+		       "%s: be autodetected.  Please pass card=<n> insmod option to\n"
+		       "%s: workaround that.  Redirect complaints to the vendor of\n"
+		       "%s: the TV card.  Best regards,\n"
+		       "%s:         -- tux\n",
+		       dev->name, dev->name, dev->name, dev->name, dev->name);
+	} else {
+		printk("%s: Your board isn't known (yet) to the driver.  You can\n"
+		       "%s: try to pick one of the existing card configs via\n"
+		       "%s: card=<n> insmod option.  Updating to the latest\n"
+		       "%s: version might help as well.\n",
+		       dev->name, dev->name, dev->name, dev->name);
+	}
+	printk("%s: Here is a list of valid choices for the card=<n> insmod option:\n",
+	       dev->name);
+	for (i = 0; i < cx23885_bcount; i++)
+		printk("%s:    card=%d -> %s\n",
+		       dev->name, i, cx23885_boards[i].name);
+}
+
+static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
+{
+	struct tveeprom tv;
+
+	tveeprom_hauppauge_analog(&dev->i2c_bus[0].i2c_client, &tv, eeprom_data);
+
+
+	/* Make sure we support the board model */
+	switch (tv.model)
+	{
+	case 76601: /* WinTV-HVR1800lp (PCIe, Retail, No IR, Dual channel ATSC and MPEG2 HW Encoder */
+	case 77001: /* WinTV-HVR1500 (Express Card, Retail, No IR, ATSC and Basic analog */
+	case 78501: /* WinTV-HVR1800 (PCIe, Retail, IR, Dual channel ATSC and MPEG2 HW Encoder */
+	case 78521: /* WinTV-HVR1800 (PCIe, Retail, IR, Dual channel ATSC and MPEG2 HW Encoder */
+		break;
+	default:
+		printk("%s: warning: unknown hauppauge model #%d\n", dev->name, tv.model);
+		break;
+	}
+
+	printk(KERN_INFO "%s: hauppauge eeprom: model=%d\n",
+			dev->name, tv.model);
+}
+
+void cx23885_card_setup(struct cx23885_dev *dev)
+{
+	static u8 eeprom[256];
+
+	if (dev->i2c_bus[0].i2c_rc == 0) {
+		dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1;
+		tveeprom_read(&dev->i2c_bus[0].i2c_client, eeprom, sizeof(eeprom));
+	}
+
+	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1800:
+	case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
+		if (dev->i2c_bus[0].i2c_rc == 0)
+			hauppauge_eeprom(dev, eeprom+0x80);
+		break;
+	}
+}
+
+/* ------------------------------------------------------------------ */
+
+EXPORT_SYMBOL(cx23885_boards);
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ * kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off
+ */

drivers/media/video/cx23885/cx23885-dvb.c

+/*
+ *  Driver for the Conexant CX23885 PCIe bridge
+ *
+ *  Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/kthread.h>
+#include <linux/file.h>
+#include <linux/suspend.h>
+
+#include "cx23885.h"
+#include "dvb-pll.h"
+#include <media/v4l2-common.h>
+
+#include "s5h1409.h"
+#include "mt2131.h"
+
+static unsigned int debug = 2;
+
+#define dprintk(level,fmt, arg...)	if (debug >= level) \
+	printk(KERN_DEBUG "%s: " fmt, dev->name, ## arg)
+
+/* ------------------------------------------------------------------ */
+
+static int dvb_buf_setup(struct videobuf_queue *q,
+			 unsigned int *count, unsigned int *size)
+{
+	struct cx23885_tsport *port = q->priv_data;
+
+	port->ts_packet_size  = 188 * 4;
+	port->ts_packet_count = 32;
+
+	*size  = port->ts_packet_size * port->ts_packet_count;
+	*count = 32;
+	return 0;
+}
+
+static int dvb_buf_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,
+			   enum v4l2_field field)
+{
+	struct cx23885_tsport *port = q->priv_data;
+	return cx23885_buf_prepare(q, port, (struct cx23885_buffer*)vb,field);
+}
+
+static void dvb_buf_queue(struct videobuf_queue *q, struct videobuf_buffer *vb)
+{
+	struct cx23885_tsport *port = q->priv_data;
+	cx23885_buf_queue(port, (struct cx23885_buffer*)vb);
+}
+
+static void dvb_buf_release(struct videobuf_queue *q, struct videobuf_buffer *vb)
+{
+	cx23885_free_buffer(q, (struct cx23885_buffer*)vb);
+}
+
+static struct videobuf_queue_ops dvb_qops = {
+	.buf_setup    = dvb_buf_setup,
+	.buf_prepare  = dvb_buf_prepare,
+	.buf_queue    = dvb_buf_queue,
+	.buf_release  = dvb_buf_release,
+};
+
+static struct s5h1409_config hauppauge_hvr1800lp_config = {
+	.demod_address = 0x32 >> 1,
+	.output_mode   = S5H1409_SERIAL_OUTPUT,
+	.gpio          = S5H1409_GPIO_OFF,
+	.if_freq       = 44000,
+	.inversion     = S5H1409_INVERSION_OFF
+};
+
+static struct s5h1409_config hauppauge_hvr1800_config = {
+	.demod_address = 0x32 >> 1,
+	.output_mode   = S5H1409_SERIAL_OUTPUT,
+	.gpio          = S5H1409_GPIO_ON,
+	.if_freq       = 44000,
+	.inversion     = S5H1409_INVERSION_OFF
+};
+
+
+static struct mt2131_config hauppauge_hvr1800lp_rev2_tunerconfig = {
+	0x61
+};
+
+static struct mt2131_config hauppauge_hvr1800_tunerconfig = {
+	0x61
+};
+
+static int dvb_register(struct cx23885_tsport *port)
+{
+	struct cx23885_dev *dev = port->dev;
+
+	/* init struct videobuf_dvb */
+	port->dvb.name = dev->name;
+
+	/* init frontend */
+	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
+		port->dvb.frontend = dvb_attach(s5h1409_attach,
+					       &hauppauge_hvr1800lp_config,
+					       &dev->i2c_bus[0].i2c_adap);
+		if (port->dvb.frontend != NULL) {
+			dvb_attach(mt2131_attach,
+				port->dvb.frontend,
+				&dev->i2c_bus[0].i2c_adap,
+				&hauppauge_hvr1800lp_rev2_tunerconfig,
+				0);
+		}
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1800:
+		port->dvb.frontend = dvb_attach(s5h1409_attach,
+					       &hauppauge_hvr1800_config,
+					       &dev->i2c_bus[0].i2c_adap);
+		if (port->dvb.frontend != NULL) {
+			dvb_attach(mt2131_attach,
+				port->dvb.frontend,
+				&dev->i2c_bus[0].i2c_adap,
+				&hauppauge_hvr1800_tunerconfig,
+				0);
+		}
+		break;
+	default:
+		printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n",
+		       dev->name);
+		break;
+	}
+	if (NULL == port->dvb.frontend) {
+		printk("%s: frontend initialization failed\n", dev->name);
+		return -1;
+	}
+
+	/* Put the analog decoder in standby to keep it quiet */
+	cx23885_call_i2c_clients (&dev->i2c_bus[0], TUNER_SET_STANDBY, NULL);
+
+	/* register everything */
+	return videobuf_dvb_register(&port->dvb, THIS_MODULE, port, &dev->pci->dev);
+}
+
+int cx23885_dvb_register(struct cx23885_tsport *port)
+{
+	struct cx23885_dev *dev = port->dev;
+	int err;
+
+	dprintk( 1, "%s\n", __FUNCTION__);
+	dprintk( 1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n",
+		dev->board,
+		dev->name,
+		dev->pci_bus,
+		dev->pci_slot);
+
+	err = -ENODEV;
+	if (!(cx23885_boards[dev->board].portc & CX23885_MPEG_DVB))
+		goto fail_core;
+
+	/* dvb stuff */
+	printk("%s: cx23885 based dvb card\n", dev->name);
+	videobuf_queue_init(
+		&port->dvb.dvbq,
+		&dvb_qops,
+		dev->pci,
+		&port->slock,
+		V4L2_BUF_TYPE_VIDEO_CAPTURE,
+		V4L2_FIELD_TOP,
+		sizeof(struct cx23885_buffer),
+		port);
+	err = dvb_register(port);
+	if (err != 0)
+		printk("%s() dvb_register failed err = %d\n", __FUNCTION__, err);
+
+ fail_core:
+	return err;
+}
+
+int cx23885_dvb_unregister(struct cx23885_tsport *port)
+{
+	/* dvb */
+	if(port->dvb.frontend)
+		videobuf_dvb_unregister(&port->dvb);
+
+	return 0;
+}

drivers/media/video/cx23885/cx23885-i2c.c

+/*
+ *  Driver for the Conexant CX23885 PCIe bridge
+ *
+ *  Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+
+#include "cx23885.h"
+
+#include <media/v4l2-common.h>
+
+static unsigned int i2c_debug = 2;
+module_param(i2c_debug, int, 0644);
+MODULE_PARM_DESC(i2c_debug,"enable debug messages [i2c]");
+
+static unsigned int i2c_scan = 0;
+module_param(i2c_scan, int, 0444);
+MODULE_PARM_DESC(i2c_scan,"scan i2c bus at insmod time");
+
+#define dprintk(level,fmt, arg...)	if (i2c_debug >= level) \
+	printk(KERN_DEBUG "%s: " fmt, dev->name , ## arg)
+
+#define I2C_WAIT_DELAY 32
+#define I2C_WAIT_RETRY 64
+
+#define I2C_EXTEND  (1 << 3)
+#define I2C_NOSTOP  (1 << 4)
+
+static inline int i2c_slave_did_ack(struct i2c_adapter *i2c_adap)
+{
+	struct cx23885_i2c *bus = i2c_adap->algo_data;
+	struct cx23885_dev *dev = bus->dev;
+	return cx_read(bus->reg_stat) & 0x01;
+}
+
+static inline int i2c_is_busy(struct i2c_adapter *i2c_adap)
+{
+	struct cx23885_i2c *bus = i2c_adap->algo_data;
+	struct cx23885_dev *dev = bus->dev;
+	return cx_read(bus->reg_stat) & 0x02 ? 1 : 0;
+}
+
+static int i2c_wait_done(struct i2c_adapter *i2c_adap)
+{
+	int count;
+
+	for (count = 0; count < I2C_WAIT_RETRY; count++) {
+		if (!i2c_is_busy(i2c_adap))
+			break;
+		udelay(I2C_WAIT_DELAY);
+	}
+
+	if (I2C_WAIT_RETRY == count)
+		return 0;
+
+	return 1;
+}
+
+static int i2c_sendbytes(struct i2c_adapter *i2c_adap, const struct i2c_msg *msg, int last)
+{
+	struct cx23885_i2c *bus = i2c_adap->algo_data;
+	struct cx23885_dev *dev = bus->dev;
+	u32 wdata, addr, ctrl;
+	int retval, cnt;
+
+	dprintk(1, "%s()\n", __FUNCTION__);
+	/* Deal with i2c probe functions with zero payload */
+	if (msg->len == 0) {
+		cx_write(bus->reg_addr, msg->addr << 25);
+		cx_write(bus->reg_ctrl, bus->i2c_period | (1 << 2));
+		if (!i2c_wait_done(i2c_adap))
+			return -EIO;
+		if (!i2c_slave_did_ack(i2c_adap))
+			return -EIO;
+
+		dprintk(1, "%s() returns 0\n", __FUNCTION__);
+		return 0;
+	}
+
+
+	/* dev, reg + first byte */
+	addr = (msg->addr << 25) | msg->buf[0];
+	wdata = msg->buf[0];
+	ctrl = bus->i2c_period | (1 << 12) | (1 << 2);
+
+	if (msg->len > 1)
+		ctrl |= I2C_NOSTOP | I2C_EXTEND;
+
+	cx_write(bus->reg_addr, addr);
+	cx_write(bus->reg_wdata, wdata);
+	cx_write(bus->reg_ctrl, ctrl);
+
+	retval = i2c_wait_done(i2c_adap);
+	if (retval < 0)
+		goto err;
+	if (retval == 0)
+		goto eio;
+	if (i2c_debug) {
+		printk(" <W %02x %02x", msg->addr << 1, msg->buf[0]);
+		if (!(ctrl & I2C_NOSTOP))
+			printk(" >\n");
+	}
+
+	for (cnt = 1; cnt < msg->len; cnt++ ) {
+		/* following bytes */
+		wdata = msg->buf[cnt];
+		ctrl = bus->i2c_period | (1 << 12) | (1 << 2);
+
+		if (cnt < msg->len-1 || !last)
+			ctrl |= I2C_NOSTOP | I2C_EXTEND;
+
+		//printk("addr = 0x%08x  wdata = 0x%08x  ctrl = 0x%08x\n", addr, wdata, ctrl);
+		cx_write(bus->reg_addr, addr);
+		cx_write(bus->reg_wdata, wdata);
+		cx_write(bus->reg_ctrl, ctrl);
+
+		retval = i2c_wait_done(i2c_adap);
+		if (retval < 0)
+			goto err;
+		if (retval == 0)
+			goto eio;
+		if (i2c_debug) {
+			printk(" %02x", msg->buf[cnt]);
+			if (!(ctrl & I2C_NOSTOP))
+				printk(" >\n");
+		}
+	}
+	return msg->len;
+
+ eio:
+	retval = -EIO;
+ err:
+	printk(" ERR: %d\n",retval);
+	return retval;
+}
+
+static int i2c_readbytes(struct i2c_adapter *i2c_adap, const struct i2c_msg *msg, int last)
+{
+	struct cx23885_i2c *bus = i2c_adap->algo_data;
+	struct cx23885_dev *dev = bus->dev;
+	u32 ctrl, cnt;
+	int retval;
+
+	dprintk(1, "%s()\n", __FUNCTION__);
+
+	/* Deal with i2c probe functions with zero payload */
+	if (msg->len == 0) {
+		cx_write(bus->reg_addr, msg->addr << 25);
+		cx_write(bus->reg_ctrl, bus->i2c_period | (1 << 2) | 1);
+		if (!i2c_wait_done(i2c_adap))
+			return -EIO;
+		if (!i2c_slave_did_ack(i2c_adap))
+			return -EIO;
+
+
+		dprintk(1, "%s() returns 0\n", __FUNCTION__);
+		return 0;
+	}
+
+	for(cnt = 0; cnt < msg->len; cnt++) {
+
+		ctrl = bus->i2c_period | (1 << 12) | (1 << 2) | 1;
+
+		if (cnt < msg->len-1 || !last)
+			ctrl |= I2C_NOSTOP | I2C_EXTEND;
+
+		cx_write(bus->reg_addr, msg->addr << 25);
+		cx_write(bus->reg_ctrl, ctrl);
+
+		retval = i2c_wait_done(i2c_adap);
+		if (retval < 0)
+			goto err;
+		if (retval == 0)
+			goto eio;
+		msg->buf[cnt] = cx_read(bus->reg_rdata) & 0xff;
+		if (i2c_debug) {
+			if (!(ctrl & I2C_NOSTOP))
+				printk(" <R %02x", (msg->addr << 1) +1);
+			printk(" =%02x", msg->buf[cnt]);
+			if (!(ctrl & I2C_NOSTOP))
+				printk(" >\n");
+		}
+	}
+	return msg->len;
+
+ eio:
+	retval = -EIO;
+ err:
+	printk(" ERR: %d\n",retval);
+	return retval;
+}
+
+static int i2c_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num)
+{
+	struct cx23885_i2c *bus = i2c_adap->algo_data;
+	struct cx23885_dev *dev = bus->dev;
+	int i, retval = 0;
+
+	dprintk(1, "%s(num = %d)\n", __FUNCTION__, num);
+
+	for (i = 0 ; i < num; i++) {
+		dprintk(1, "%s(num = %d) addr = 0x%02x  len = 0x%x\n"
+			, __FUNCTION__, num, msgs[i].addr, msgs[i].len);
+		if (msgs[i].flags & I2C_M_RD) {
+			/* read */
+			retval = i2c_readbytes(i2c_adap, &msgs[i], i+1 == num);
+			if (retval < 0)
+				goto err;
+		} else {
+			/* write */
+			retval = i2c_sendbytes(i2c_adap, &msgs[i], i+1 == num);
+			if (retval < 0)
+				goto err;
+		}
+	}
+	return num;
+
+ err:
+	return retval;
+}
+
+static int attach_inform(struct i2c_client *client)
+{
+	struct cx23885_dev *dev = i2c_get_adapdata(client->adapter);
+
+	dprintk(1, "%s i2c attach [addr=0x%x,client=%s]\n",
+		client->driver->driver.name, client->addr, client->name);
+
+	if (!client->driver->command)
+		return 0;
+
+	return 0;
+}
+
+static int detach_inform(struct i2c_client *client)
+{
+	struct cx23885_dev *dev = i2c_get_adapdata(client->adapter);
+
+	dprintk(1, "i2c detach [client=%s]\n", client->name);
+
+	return 0;
+}
+
+void cx23885_call_i2c_clients(struct cx23885_i2c *bus, unsigned int cmd, void *arg)
+{
+//	struct cx23885_dev *dev = bus->dev;
+
+	if (bus->i2c_rc != 0)
+		return;
+
+		i2c_clients_command(&bus->i2c_adap, cmd, arg);
+}
+
+static int cx23885_algo_control(struct i2c_adapter *adap,
+				unsigned int cmd, unsigned long arg)
+{
+	return 0;
+}
+
+static u32 cx23885_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_SMBUS_EMUL;
+}
+
+static struct i2c_algorithm cx23885_i2c_algo_template = {
+	.master_xfer	= i2c_xfer,
+	.algo_control	= cx23885_algo_control,
+	.functionality	= cx23885_functionality,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static struct i2c_adapter cx23885_i2c_adap_template = {
+	.name              = "cx23885",
+	.owner             = THIS_MODULE,
+	.id                = I2C_HW_B_CX23885,
+	.algo              = &cx23885_i2c_algo_template,
+//	.class             = I2C_CLASS_TV_ANALOG,
+	.client_register   = attach_inform,
+	.client_unregister = detach_inform,
+};
+
+static struct i2c_client cx23885_i2c_client_template = {
+	.name	= "cx23885 internal",
+};
+
+static char *i2c_devs[128] = {
+	[ 0x32 >> 1 ] = "cx24227",
+	[ 0x88 >> 1 ] = "cx25837",
+	[ 0x84 >> 1 ] = "tda8295",
+	[ 0xa0 >> 1 ] = "eeprom",
+	[ 0xc0 >> 1 ] = "mt2131/tda8275",
+	[ 0xc2 >> 1 ] = "mt2131/tda8275",
+};
+
+static void do_i2c_scan(char *name, struct i2c_client *c)
+{
+	unsigned char buf;
+	int i,rc;
+
+	for (i = 0; i < 128; i++) {
+		c->addr = i;
+		rc = i2c_master_recv(c,&buf,0);
+		if (rc < 0)
+			continue;
+		printk("%s: i2c scan: found device @ 0x%x  [%s]\n",
+		       name, i << 1, i2c_devs[i] ? i2c_devs[i] : "???");
+	}
+}
+
+/* init + register i2c algo-bit adapter */
+int cx23885_i2c_register(struct cx23885_i2c *bus)
+{
+	struct cx23885_dev *dev = bus->dev;
+
+	dprintk(1, "%s(bus = %d)\n", __FUNCTION__, bus->nr);
+
+	memcpy(&bus->i2c_adap, &cx23885_i2c_adap_template, sizeof(bus->i2c_adap));
+	memcpy(&bus->i2c_algo, &cx23885_i2c_algo_template, sizeof(bus->i2c_algo));
+	memcpy(&bus->i2c_client, &cx23885_i2c_client_template, sizeof(bus->i2c_client));
+
+	bus->i2c_adap.dev.parent = &dev->pci->dev;
+
+	strlcpy(bus->i2c_adap.name, bus->dev->name, sizeof(bus->i2c_adap.name));
+	bus->i2c_algo.data = bus;
+	bus->i2c_adap.algo_data = bus;
+	i2c_add_adapter(&bus->i2c_adap);
+
+	bus->i2c_client.adapter = &bus->i2c_adap;
+
+	if (0 == bus->i2c_rc) {
+		printk("%s: i2c bus %d registered\n", dev->name, bus->nr);
+		if (i2c_scan)
+			do_i2c_scan(dev->name, &bus->i2c_client);
+	} else
+		printk("%s: i2c bus %d register FAILED\n", dev->name, bus->nr);
+
+	return bus->i2c_rc;
+}
+
+int cx23885_i2c_unregister(struct cx23885_i2c *bus)
+{
+	i2c_del_adapter(&bus->i2c_adap);
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+EXPORT_SYMBOL(cx23885_call_i2c_clients);
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */

drivers/media/video/cx23885/cx23885.h

+/*
+ *  Driver for the Conexant CX23885 PCIe bridge
+ *
+ *  Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/pci.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/kdev_t.h>
+
+#include <media/v4l2-common.h>
+#include <media/tuner.h>
+#include <media/tveeprom.h>
+#include <media/video-buf.h>
+#include <media/video-buf-dvb.h>
+
+#include "btcx-risc.h"
+#include "cx23885-reg.h"
+
+#include <linux/version.h>
+#include <linux/mutex.h>
+
+#define CX88_VERSION_CODE KERNEL_VERSION(0,0,6)
+
+#define UNSET (-1U)
+
+#define CX23885_MAXBOARDS 8
+
+#define SRAM 0
+
+/* Max number of inputs by card */
+#define MAX_CX23885_INPUT 8
+
+//#define SHADOW_MAX 3
+
+#define BUFFER_TIMEOUT     (HZ)  /* 0.5 seconds */
+
+#define CX23885_BOARD_NOAUTO               UNSET
+#define CX23885_BOARD_UNKNOWN                  0
+#define CX23885_BOARD_HAUPPAUGE_HVR1800lp      1
+#define CX23885_BOARD_HAUPPAUGE_HVR1800        2
+
+enum cx23885_itype {
+	CX23885_VMUX_COMPOSITE1 = 1,
+	CX23885_VMUX_COMPOSITE2,
+	CX23885_VMUX_COMPOSITE3,
+	CX23885_VMUX_COMPOSITE4,
+	CX23885_VMUX_SVIDEO,
+	CX23885_VMUX_TELEVISION,
+	CX23885_VMUX_CABLE,
+	CX23885_VMUX_DVB,
+	CX23885_VMUX_DEBUG,
+	CX23885_RADIO,
+};
+
+struct cx23885_fmt {
+	char  *name;
+	u32   fourcc;          /* v4l2 format id */
+	int   depth;
+	int   flags;
+	u32   cxformat;
+};
+
+/* buffer for one video frame */
+struct cx23885_buffer {
+	/* common v4l buffer stuff -- must be first */
+	struct videobuf_buffer vb;
+
+	/* cx23885 specific */
+	unsigned int           bpl;
+	struct btcx_riscmem    risc;
+	struct cx23885_fmt     *fmt;
+	u32                    count;
+};
+
+struct cx23885_input {
+	enum cx23885_itype type;
+	unsigned int    vmux;
+	u32             gpio0, gpio1, gpio2, gpio3;
+};
+
+struct cx23885_board {
+	char                    *name;
+	enum {
+		CX23885_MPEG_UNDEFINED = 0,
+		CX23885_MPEG_DVB
+	} portc;
+	enum {
+		CX23885_BRIDGE_UNDEFINED = 0,
+		CX23885_BRIDGE_885 = 885,
+		CX23885_BRIDGE_887 = 887,
+	} bridge;
+	struct cx23885_input    input[MAX_CX23885_INPUT];
+};
+
+struct cx23885_subid {
+	u16     subvendor;
+	u16     subdevice;
+	u32     card;
+};
+
+struct cx23885_i2c {
+	struct cx23885_dev *dev;
+
+	int                        nr;
+
+	/* i2c i/o */
+	struct i2c_adapter         i2c_adap;
+	struct i2c_algo_bit_data   i2c_algo;
+	struct i2c_client          i2c_client;
+	u32                        i2c_rc;
+
+	/* 885 registers used for raw addess */
+	u32                        i2c_period;
+	u32                        reg_ctrl;
+	u32                        reg_stat;
+	u32                        reg_addr;
+	u32                        reg_rdata;
+	u32                        reg_wdata;
+};
+
+struct cx23885_dmaqueue {
+	struct list_head       active;
+	struct list_head       queued;
+	struct timer_list      timeout;
+	struct btcx_riscmem    stopper;
+	u32                    count;
+};
+
+struct cx23885_tsport {
+	struct cx23885_dev *dev;
+
+	int                        nr;
+	int                        sram_chno;
+
+	struct videobuf_dvb        dvb;
+
+	/* dma queues */
+	struct cx23885_dmaqueue    mpegq;
+	u32                        ts_packet_size;
+	u32                        ts_packet_count;
+
+	int                        width;
+	int                        height;
+
+	spinlock_t                 slock;
+
+	/* registers */
+	u32                        reg_gpcnt;
+	u32                        reg_gpcnt_ctl;
+	u32                        reg_dma_ctl;
+	u32                        reg_lngth;
+	u32                        reg_hw_sop_ctrl;
+	u32                        reg_gen_ctrl;
+	u32                        reg_bd_pkt_status;
+	u32                        reg_sop_status;
+	u32                        reg_fifo_ovfl_stat;
+	u32                        reg_vld_misc;
+	u32                        reg_ts_clk_en;
+	u32                        reg_ts_int_msk;
+
+	/* Default register vals */
+	int                        pci_irqmask;
+	u32                        dma_ctl_val;
+	u32                        ts_int_msk_val;
+	u32                        gen_ctrl_val;
+	u32                        ts_clk_en_val;
+};
+
+struct cx23885_dev {
+	struct list_head           devlist;
+	atomic_t                   refcount;
+
+	/* pci stuff */
+	struct pci_dev             *pci;
+	unsigned char              pci_rev, pci_lat;
+	int                        pci_bus, pci_slot;
+	u32                        __iomem *lmmio;
+	u8                         __iomem *bmmio;
+	//u32                        shadow[SHADOW_MAX];
+	int                        pci_irqmask;
+
+	/* I2C adapters: Master 1 and 2 (External) and Master 3 (Internal only) */
+	struct cx23885_i2c         i2c_bus[3];
+
+	int                        nr;
+	struct mutex               lock;
+
+	/* board details */
+	unsigned int               board;
+	char                       name[32];
+
+	struct cx23885_tsport      ts2;
+
+	/* sram configuration */
+	struct sram_channel        *sram_channels;
+};
+
+#define SRAM_CH01  0 /* Video A */
+#define SRAM_CH02  1 /* VBI A */
+#define SRAM_CH03  2 /* Video B */
+#define SRAM_CH04  3 /* Transport via B */
+#define SRAM_CH05  4 /* VBI B */
+#define SRAM_CH06  5 /* Video C */
+#define SRAM_CH07  6 /* Transport via C */
+#define SRAM_CH08  7 /* Audio Internal A */
+#define SRAM_CH09  8 /* Audio Internal B */
+#define SRAM_CH10  9 /* Audio External */
+#define SRAM_CH11 10 /* COMB_3D_N */
+#define SRAM_CH12 11 /* Comb 3D N1 */
+#define SRAM_CH13 12 /* Comb 3D N2 */
+#define SRAM_CH14 13 /* MOE Vid */
+#define SRAM_CH15 14 /* MOE RSLT */
+
+struct sram_channel {
+	char *name;
+	u32  cmds_start;
+	u32  ctrl_start;
+	u32  cdt;
+	u32  fifo_start;;
+	u32  fifo_size;
+	u32  ptr1_reg;
+	u32  ptr2_reg;
+	u32  cnt1_reg;
+	u32  cnt2_reg;
+	u32  jumponly;
+};
+
+/* ----------------------------------------------------------- */
+
+#define cx_read(reg)             readl(dev->lmmio + ((reg)>>2))
+#define cx_write(reg,value)      writel((value), dev->lmmio + ((reg)>>2))
+
+#define cx_andor(reg,mask,value) \
+  writel((readl(dev->lmmio+((reg)>>2)) & ~(mask)) |\
+  ((value) & (mask)), dev->lmmio+((reg)>>2))
+
+#define cx_set(reg,bit)          cx_andor((reg),(bit),(bit))
+#define cx_clear(reg,bit)        cx_andor((reg),(bit),0)
+
+
+extern int cx23885_sram_channel_setup(struct cx23885_dev *dev,
+	struct sram_channel *ch,
+	unsigned int bpl, u32 risc);
+
+/* ----------------------------------------------------------- */
+/* cx23885-cards.c                                                */
+
+extern struct cx23885_board cx23885_boards[];
+extern const unsigned int cx23885_bcount;
+
+extern struct cx23885_subid cx23885_subids[];
+extern const unsigned int cx23885_idcount;
+
+extern void cx23885_card_list(struct cx23885_dev *dev);
+extern void cx23885_card_setup(struct cx23885_dev *dev);
+extern void cx23885_card_setup_pre_i2c(struct cx23885_dev *dev);
+
+extern int cx23885_dvb_register(struct cx23885_tsport *port);
+extern int cx23885_dvb_unregister(struct cx23885_tsport *port);
+
+extern int cx23885_buf_prepare(struct videobuf_queue *q, struct cx23885_tsport *port,
+			struct cx23885_buffer *buf, enum v4l2_field field);
+
+extern void cx23885_buf_queue(struct cx23885_tsport *port, struct cx23885_buffer *buf);
+extern void cx23885_free_buffer(struct videobuf_queue *q, struct cx23885_buffer *buf);
+
+/* ----------------------------------------------------------- */
+/* cx23885-i2c.c                                                */
+extern int cx23885_i2c_register(struct cx23885_i2c *bus);
+extern int cx23885_i2c_unregister(struct cx23885_i2c *bus);
+extern void cx23885_call_i2c_clients(struct cx23885_i2c *bus, unsigned int cmd, void *arg);
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ * kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off
+ */